This is a follow-up for my previous series:
ARM: da850: new drivers for better LCDC support
from which the new drivers were merged, while the patch adding the
panel node was nacked and has been dropped.
The first patch in this series enables the new drivers in da850.dtsi.
It has been changed since the last iteration to not disable the added
nodes. Also: the patch enabling the nodes in da850-lcdk.dts has been
dropped too.
The second patch updates the davinci defconfig.
Bartosz Golaszewski (2):
ARM: dts: da850: add the mstpri and ddrctl nodes
ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers
arch/arm/boot/dts/da850.dtsi | 9 +++++++++
arch/arm/configs/davinci_all_defconfig | 2 ++
2 files changed, 11 insertions(+)
--
2.9.3
Add the nodes for the MSTPRI configuration and DDR2/mDDR memory
controller drivers to da850.dtsi.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
arch/arm/boot/dts/da850.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 1bb1f6d..1635218 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -440,6 +440,11 @@
interrupts = <52>;
status = "disabled";
};
+
+ mstpri: mstpri@14110 {
+ compatible = "ti,da850-mstpri";
+ reg = <0x14110 0x0c>;
+ };
};
aemif: aemif@68000000 {
compatible = "ti,da850-aemif";
@@ -451,4 +456,8 @@
1 0 0x68000000 0x00008000>;
status = "disabled";
};
+ ddrctl: ddrctl@b0000000 {
+ compatible = "ti,da850-ddr-controller";
+ reg = <0xb0000000 0xe8>;
+ };
};
--
2.9.3
With the da8xx memory controller and master peripheral priority
drivers merged and corresponding device tree changes in place we can
now enable appropriate options by default.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
arch/arm/configs/davinci_all_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index b5e978f..f814f01 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -56,6 +56,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
+CONFIG_DA8XX_MSTPRI=y
CONFIG_MTD=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_CFI=m
@@ -187,6 +188,7 @@ CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=m
+CONFIG_DA8XX_DDRCTL=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
--
2.9.3
On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote:
> Add the nodes for the MSTPRI configuration and DDR2/mDDR memory
> controller drivers to da850.dtsi.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> ---
> arch/arm/boot/dts/da850.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 1bb1f6d..1635218 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -440,6 +440,11 @@
> interrupts = <52>;
> status = "disabled";
> };
> +
> + mstpri: mstpri@14110 {
> + compatible = "ti,da850-mstpri";
> + reg = <0x14110 0x0c>;
> + };
Instead of adding the node to the end, can you place it above the
cfgchip node to keep it sorted by reg. We have not really followed that
in this file. May be we should have. But lets start with this.
> };
> aemif: aemif@68000000 {
> compatible = "ti,da850-aemif";
> @@ -451,4 +456,8 @@
> 1 0 0x68000000 0x00008000>;
> status = "disabled";
> };
> + ddrctl: ddrctl@b0000000 {
> + compatible = "ti,da850-ddr-controller";
> + reg = <0xb0000000 0xe8>;
> + };
Can you name the node memory-controller@b0000000? Thats the generic name
suggested by ePAPR 1.1 for memory controllers.
I could not find any naming suggestions for the bus master priority
controller above, but based on the pattern used for other controllers,
may be it should be called priority-controller@14110 instead of mstpri@14110
Thanks,
Sekhar
On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote:
> With the da8xx memory controller and master peripheral priority
> drivers merged and corresponding device tree changes in place we can
> now enable appropriate options by default.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
Applied to v4.10/defconfig
Thanks,
Sekhar