From: Hongtao Jia <[email protected]>
Update #thermal-sensor-cells from 0 to 1 according to the new binding. The
sensor specifier added is the monitoring site ID, and represents the "n" in
TRITSRn and TRATSRn.
Signed-off-by: Jia Hongtao <[email protected]>
---
Changes for V3:
* Update the commit log to a better description.
Changes for V2:
* Rebase on latest linux-next tree (next-20161006).
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 44e399b..145c7f4 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -526,7 +526,7 @@
0x00030000 0x00000012
0x00030001 0x0000001d>;
- #thermal-sensor-cells = <0>;
+ #thermal-sensor-cells = <1>;
};
thermal-zones {
@@ -534,7 +534,7 @@
polling-delay-passive = <1000>;
polling-delay = <5000>;
- thermal-sensors = <&tmu>;
+ thermal-sensors = <&tmu 2>;
trips {
cpu_alert: cpu-alert {
--
2.1.0.27.g96db324
From: Hongtao Jia <[email protected]>
Update #thermal-sensor-cells from 0 to 1 according to the new binding. The
sensor specifier added is the monitoring site ID, and represents the "n" in
TRITSRn and TRATSRn.
Signed-off-by: Jia Hongtao <[email protected]>
---
Changes for V3:
* Update the commit log to a better description.
Changes for V2:
* Rebase on latest linux-next tree (next-20161006).
arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index 6e0b489..bce762a 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -321,7 +321,7 @@
0x00030001 0x0000000d
0x00030002 0x00000019
0x00030003 0x00000024>;
- #thermal-sensor-cells = <0>;
+ #thermal-sensor-cells = <1>;
};
thermal-zones {
@@ -329,7 +329,7 @@
polling-delay-passive = <1000>;
polling-delay = <5000>;
- thermal-sensors = <&tmu>;
+ thermal-sensors = <&tmu 0>;
trips {
cpu_alert: cpu-alert {
--
2.1.0.27.g96db324
On Tue, 2016-10-25 at 10:15 +0800, Jia Hongtao wrote:
> From: Hongtao Jia <[email protected]>
>
> Update #thermal-sensor-cells from 0 to 1 according to the new binding. The
> sensor specifier added is the monitoring site ID, and represents the "n" in
> TRITSRn and TRATSRn.
>
> Signed-off-by: Jia Hongtao <[email protected]>
Where can I find this new binding? As of the current linux-next I don't see
anything in qoriq-thermal.txt about this.
-Scott
> -----Original Message-----
> From: Scott Wood [mailto:[email protected]]
> Sent: Wednesday, November 23, 2016 3:07 PM
> To: Troy Jia <[email protected]>; [email protected]; [email protected];
> [email protected]; Scott Wood <[email protected]>; [email protected]
> Cc: [email protected]; [email protected]; linux-
> [email protected]; [email protected]
> Subject: Re: [PATCH V3 1/2] powerpc/mpc85xx: Update TMU device tree node for
> T1040/T1042
>
> On Tue, 2016-10-25 at 10:15 +0800, Jia Hongtao wrote:
> > From: Hongtao Jia <[email protected]>
> >
> > Update #thermal-sensor-cells from 0 to 1 according to the new binding.
> > The sensor specifier added is the monitoring site ID, and represents
> > the "n" in TRITSRn and TRATSRn.
> >
> > Signed-off-by: Jia Hongtao <[email protected]>
>
> Where can I find this new binding? As of the current linux-next I don't see anything
> in qoriq-thermal.txt about this.
Hi Rui Zhang,
As we discussed before. The time was inappropriate as merge window was about to close.
So do you have any plan for applying the binding file recently?
-Hongtao.