It wasn't possible to enable some features like
memory-to-memory transfers or multi block transfers via DT.
It is fixed by these patches.
Changes for v6:
* Use "supported" as default state for "multi-block" property,
to keep old DTBs working. Pointed by Andy Shevchenko.
Changes for v5:
* Update existing DTS. Pointed by Andy Shevchenko.
* Read multi-block per chanel instead of per master (Move
DW_DMA_MAX_NR_CHANNELS define from regs.h to dma-dw.h to
implement this) Pointed by Andy Shevchenko.
Changes for v4:
* Fix setting inverted value to "dwc->nollp". My fault - I
tested with wrong DTS, so DMAC was configured from autoconfig
instead of device tree. Pointed by Andy Shevchenko.
* Update "multi-block" diescription in documentation to be more
clear. Pointed by Arnd Bergmann.
Changes for v3:
* Update existing platform data.
We don't need to update existing DTS because default logic
wasn't change: we don't set "is_nollp" if we read
configuration from DT before. And we don't set it now if
"multi-block" property doesn't exist in DTS.
Changes for v2:
* I thought about is_memcpy DT property: all known devices, which
use DT for configuration, support memory-to-memory transfers.
So we don't need to read it from DT. So enable it by default,
if we read configuration from DT.
* Use "multi-block" instead of "hw-llp" name to be more clear.
* Move adding DT property and adding documentation for this
property to one patch.
Eugeniy Paltsev (2):
DW DMAC: enable memory-to-memory transfers support
DW DMAC: add multi-block property to device tree
Documentation/devicetree/bindings/dma/snps-dma.txt | 2 ++
arch/arc/boot/dts/abilis_tb10x.dtsi | 1 +
arch/arm/boot/dts/spear13xx.dtsi | 2 ++
drivers/dma/dw/core.c | 2 +-
drivers/dma/dw/platform.c | 18 +++++++++++++++++-
drivers/dma/dw/regs.h | 3 ++-
drivers/tty/serial/8250/8250_lpss.c | 2 +-
include/linux/platform_data/dma-dw.h | 5 +++--
8 files changed, 29 insertions(+), 6 deletions(-)
--
2.5.5
Several versions of DW DMAC have multi block transfers hardware
support. Hardware support of multi block transfers is disabled
by default if we use DT to configure DMAC and software emulation
of multi block transfers used instead.
Add multi-block property, so it is possible to enable hardware
multi block transfers (if present) via DT.
Switch from per device is_nollp variable to multi_block array
to be able enable/disable multi block transfers separately per
channel.
Acked-by: Andy Shevchenko <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
---
Also:
Update DT documentation.
Update existing platform data and DTS.
Documentation/devicetree/bindings/dma/snps-dma.txt | 2 ++
arch/arc/boot/dts/abilis_tb10x.dtsi | 1 +
arch/arm/boot/dts/spear13xx.dtsi | 2 ++
drivers/dma/dw/core.c | 2 +-
drivers/dma/dw/platform.c | 12 +++++++++++-
drivers/dma/dw/regs.h | 3 ++-
drivers/tty/serial/8250/8250_lpss.c | 2 +-
include/linux/platform_data/dma-dw.h | 5 +++--
8 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index 0f55832..4775c66f 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -27,6 +27,8 @@ Optional properties:
that services interrupts for this device
- is_private: The device channels should be marked as private and not for by the
general purpose DMA channel allocator. False if not passed.
+- multi-block: Multi block transfers supported by hardware. Array property with
+ one cell per channel. 0: not supported, 1 (default): supported.
Example:
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index de53f5c..3121536 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -129,6 +129,7 @@
data-width = <4>;
clocks = <&ahb_clk>;
clock-names = "hclk";
+ multi-block = <1 1 1 1 1 1>;
};
i2c0: i2c@FF120000 {
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 449acf0..17ea0ab 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -118,6 +118,7 @@
block_size = <0xfff>;
dma-masters = <2>;
data-width = <8 8>;
+ multi-block = <1 1 1 1 1 1 1 1>;
};
dma@eb000000 {
@@ -134,6 +135,7 @@
chan_priority = <1>;
block_size = <0xfff>;
data-width = <8 8>;
+ multi-block = <1 1 1 1 1 1 1 1>;
};
fsmc: flash@b0000000 {
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index c2c0a61..e5adf5d 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -1569,7 +1569,7 @@ int dw_dma_probe(struct dw_dma_chip *chip)
(dwc_params >> DWC_PARAMS_MBLK_EN & 0x1) == 0;
} else {
dwc->block_size = pdata->block_size;
- dwc->nollp = pdata->is_nollp;
+ dwc->nollp = !pdata->multi_block[i];
}
}
diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
index aa7a5c1..b1655e4 100644
--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -102,7 +102,7 @@ dw_dma_parse_dt(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct dw_dma_platform_data *pdata;
- u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
+ u32 tmp, arr[DW_DMA_MAX_NR_MASTERS], mb[DW_DMA_MAX_NR_CHANNELS];
u32 nr_masters;
u32 nr_channels;
@@ -118,6 +118,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
if (of_property_read_u32(np, "dma-channels", &nr_channels))
return NULL;
+ if (nr_channels > DW_DMA_MAX_NR_CHANNELS)
+ return NULL;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -152,6 +154,14 @@ dw_dma_parse_dt(struct platform_device *pdev)
pdata->data_width[tmp] = BIT(arr[tmp] & 0x07);
}
+ if (!of_property_read_u32_array(np, "multi-block", mb, nr_channels)) {
+ for (tmp = 0; tmp < nr_channels; tmp++)
+ pdata->multi_block[tmp] = mb[tmp];
+ } else {
+ for (tmp = 0; tmp < nr_channels; tmp++)
+ pdata->multi_block[tmp] = 1;
+ }
+
return pdata;
}
#else
diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h
index f65dd10..4e0128c 100644
--- a/drivers/dma/dw/regs.h
+++ b/drivers/dma/dw/regs.h
@@ -12,7 +12,8 @@
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
-#define DW_DMA_MAX_NR_CHANNELS 8
+#include "internal.h"
+
#define DW_DMA_MAX_NR_REQUESTS 16
/* flow controller */
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index f607946..58cbb30 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -157,12 +157,12 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
static const struct dw_dma_platform_data qrk_serial_dma_pdata = {
.nr_channels = 2,
.is_private = true,
- .is_nollp = true,
.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
.chan_priority = CHAN_PRIORITY_ASCENDING,
.block_size = 4095,
.nr_masters = 1,
.data_width = {4},
+ .multi_block = {0},
};
static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index 5f0e11e..e69e415 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -14,6 +14,7 @@
#include <linux/device.h>
#define DW_DMA_MAX_NR_MASTERS 4
+#define DW_DMA_MAX_NR_CHANNELS 8
/**
* struct dw_dma_slave - Controller-specific information about a slave
@@ -40,19 +41,18 @@ struct dw_dma_slave {
* @is_private: The device channels should be marked as private and not for
* by the general purpose DMA channel allocator.
* @is_memcpy: The device channels do support memory-to-memory transfers.
- * @is_nollp: The device channels does not support multi block transfers.
* @chan_allocation_order: Allocate channels starting from 0 or 7
* @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
* @block_size: Maximum block size supported by the controller
* @nr_masters: Number of AHB masters supported by the controller
* @data_width: Maximum data width supported by hardware per AHB master
* (in bytes, power of 2)
+ * @multi_block: Multi block transfers supported by hardware per channel.
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
bool is_private;
bool is_memcpy;
- bool is_nollp;
#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */
unsigned char chan_allocation_order;
@@ -62,6 +62,7 @@ struct dw_dma_platform_data {
unsigned int block_size;
unsigned char nr_masters;
unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
+ unsigned char multi_block[DW_DMA_MAX_NR_CHANNELS];
};
#endif /* _PLATFORM_DATA_DMA_DW_H */
--
2.5.5
All known devices, which use DT for configuration, support
memory-to-memory transfers. So enable it by default, if we read
configuration from DT.
Acked-by: Andy Shevchenko <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
---
drivers/dma/dw/platform.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
index 5bda0eb..aa7a5c1 100644
--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -129,6 +129,12 @@ dw_dma_parse_dt(struct platform_device *pdev)
if (of_property_read_bool(np, "is_private"))
pdata->is_private = true;
+ /*
+ * All known devices, which use DT for configuration, support
+ * memory-to-memory transfers. So enable it by default.
+ */
+ pdata->is_memcpy = true;
+
if (!of_property_read_u32(np, "chan_allocation_order", &tmp))
pdata->chan_allocation_order = (unsigned char)tmp;
--
2.5.5
On Fri, Nov 25, 2016 at 05:59:05PM +0300, Eugeniy Paltsev wrote:
> It wasn't possible to enable some features like
> memory-to-memory transfers or multi block transfers via DT.
> It is fixed by these patches.
Applied after adding substem name tag.
--
~Vinod