2016-11-27 08:49:15

by Naga Sureshkumar Relli

[permalink] [raw]
Subject: [LINUX RFC v4 0/4] Add stripe support for ZynqMP SoC GQSPI controller

This patch series is continuation to previous patches mentioned in below link
http://marc.info/?l=linux-spi&m=145009963109143&w=2

i am re-initiating this series, Could you please help us to get this done?

what is dual parallel mode?
---------------------------
ZynqMP GQSPI controller supports Dual Parallel mode with following functionalities:
1) Supporting two SPI flash memories operating in parallel. 8 I/O lines.
2) Chip selects, data lines and clock are differ to both the flash devices
3) This mode is targeted for faster read/write speed and also doubles the size
4) Commands/data can be transmitted/received from both the devices(mirror),
or only upper or only lower flash memory devices.
5) Data arrangement:
With stripe enabled,
Even bytes i.e. 0, 2, 4,... are transmitted on Lower Data Bus
Odd bytes i.e. 1, 3, 5,.. are transmitted on Upper Data Bus.

i have tested this on top of latest git-hub master.
kindly suggest us the way, so that we can proceed further to add this support.

Naga Sureshkumar Relli (4):
spi: adding support for data stripe feature in core
mtd: add spi_device instance to spi_nor struct
mtd: spi-nor: add stripe support
spi: zynqmp: gqspi: add support for stripe feature

drivers/mtd/devices/m25p80.c | 1 +
drivers/mtd/spi-nor/spi-nor.c | 130 ++++++++++++++++++++++++++++++++---------
drivers/spi/spi-zynqmp-gqspi.c | 26 ++++++++-
drivers/spi/spi.c | 8 +++
include/linux/mtd/spi-nor.h | 3 +
include/linux/spi/spi.h | 11 ++++
6 files changed, 149 insertions(+), 30 deletions(-)

--
2.10.2