This series contains the last DT changes required for LCDC support
on da850-lcdk. The first one adds the dumb-vga-dac nodes, the second
limits the maximum pixel clock rate.
v1 -> v2:
- drop patch 3/3 (already merged)
- use max-pixelclock instead of max-bandwidth for display mode limiting
v2 -> v3:
- make the commit message in patch [2/2] more detailed
- move the max-pixelclock property to da850.dtsi as the limit
affects all da850-based boards
v3 -> v4:
- remove the input port from the display node
- move the display ports node to da850-lcdk.dts
- rename the vga_bridge node to vga-bridge
- move the LCDC pins to the LCDC node (from the vga bridge node)
v4 -> v5:
- rename the display label to lcdc
- instead of using the 'dumb-vga-dac' compatible, add bindings for
ti,ths8135 and use it as the vga-bridge node compatible
v5 -> v6:
- drop the endpoint numbers for nodes with single endpoints
- split patch 2/4 from v5 into two separate patches: one adding DT
bindings and one adding actual support for ths8135
v6 -> v7:
- simplified patch 4/5 by removing unnecessary properties from ports
and endpoints nodes
Bartosz Golaszewski (5):
ARM: dts: da850: rename the display node label
drm: bridge: add DT bindings for TI ths8135
drm: bridge: add support for TI ths8135
ARM: dts: da850-lcdk: add the vga-bridge node
ARM: dts: da850: specify the maximum pixel clock rate for tilcdc
.../bindings/display/bridge/ti,ths8135.txt | 46 +++++++++++++++++++
arch/arm/boot/dts/da850-lcdk.dts | 51 ++++++++++++++++++++++
arch/arm/boot/dts/da850.dtsi | 3 +-
drivers/gpu/drm/bridge/dumb-vga-dac.c | 1 +
4 files changed, 100 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
--
2.9.3
The tilcdc node name is 'display' as per the ePAPR 1.1 recommendation.
The label is also 'display', but change it to 'lcdc' to make it clear
what the underlying hardware is.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
arch/arm/boot/dts/da850.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 104155d..6b0ef3d 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -458,7 +458,7 @@
dma-names = "tx", "rx";
};
- display: display@213000 {
+ lcdc: display@213000 {
compatible = "ti,da850-tilcdc";
reg = <0x213000 0x1000>;
interrupts = <52>;
--
2.9.3
At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
is 37.5 MHz[1]. We must filter out any mode for which the calculated
pixel clock rate would exceed this value.
Specify the max-pixelclock property for the display node for
da850-lcdk.
[1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
arch/arm/boot/dts/da850.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 6b0ef3d..58b1566 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -462,6 +462,7 @@
compatible = "ti,da850-tilcdc";
reg = <0x213000 0x1000>;
interrupts = <52>;
+ max-pixelclock = <37500>;
status = "disabled";
};
};
--
2.9.3
Add the vga-bridge node to the board DT together with corresponding
ports and vga connector. This allows to retrieve the edid info from
the display automatically.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
---
arch/arm/boot/dts/da850-lcdk.dts | 51 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..1ae2260 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -51,6 +51,45 @@
system-clock-frequency = <24576000>;
};
};
+
+ vga-bridge {
+ compatible = "ti,ths8135";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vga_bridge_in: endpoint {
+ remote-endpoint = <&lcdc_out_vga>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vga_bridge_out: endpoint {
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ ddc-i2c-bus = <&i2c0>;
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
};
&pmx_core {
@@ -236,3 +275,15 @@
&memctrl {
status = "okay";
};
+
+&lcdc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ port {
+ lcdc_out_vga: endpoint {
+ remote-endpoint = <&vga_bridge_in>;
+ };
+ };
+};
--
2.9.3
THS8135 is a configurable video DAC, but no configuration is actually
necessary to make it work.
For now use the dumb-vga-dac driver to support it.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
---
drivers/gpu/drm/bridge/dumb-vga-dac.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index e570698..86e9f9c 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -237,6 +237,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
static const struct of_device_id dumb_vga_match[] = {
{ .compatible = "dumb-vga-dac" },
+ { .compatible = "ti,ths8135" },
{},
};
MODULE_DEVICE_TABLE(of, dumb_vga_match);
--
2.9.3
THS8135 is a configurable video DAC. Add DT bindings for this chip.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
.../bindings/display/bridge/ti,ths8135.txt | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
new file mode 100644
index 0000000..6ec1a88
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
@@ -0,0 +1,46 @@
+THS8135 Video DAC
+-----------------
+
+This is the binding for Texas Instruments THS8135 Video DAC bridge.
+
+Required properties:
+
+- compatible: Must be "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+ compatible = "ti,ths8135";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vga_bridge_in: endpoint {
+ remote-endpoint = <&lcdc_out_vga>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vga_bridge_out: endpoint {
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+};
--
2.9.3
Hi,
On 12/13/2016 03:39 PM, Bartosz Golaszewski wrote:
> THS8135 is a configurable video DAC. Add DT bindings for this chip.
Queued to drm-misc-next
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
> Acked-by: Rob Herring <[email protected]>
> ---
> .../bindings/display/bridge/ti,ths8135.txt | 46 ++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> new file mode 100644
> index 0000000..6ec1a88
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> @@ -0,0 +1,46 @@
> +THS8135 Video DAC
> +-----------------
> +
> +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +
> +Required properties:
> +
> +- compatible: Must be "ti,ths8135"
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modelled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +- Video port 0 for RGB input
> +- Video port 1 for VGA output
> +
> +Example
> +-------
> +
> +vga-bridge {
> + compatible = "ti,ths8135";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + vga_bridge_in: endpoint {
> + remote-endpoint = <&lcdc_out_vga>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + vga_bridge_out: endpoint {
> + remote-endpoint = <&vga_con_in>;
> + };
> + };
> + };
> +};
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
On 12/13/2016 03:39 PM, Bartosz Golaszewski wrote:
> THS8135 is a configurable video DAC, but no configuration is actually
> necessary to make it work.
>
> For now use the dumb-vga-dac driver to support it.
Queued to drm-misc-next
Archit
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
> ---
> drivers/gpu/drm/bridge/dumb-vga-dac.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index e570698..86e9f9c 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -237,6 +237,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
>
> static const struct of_device_id dumb_vga_match[] = {
> { .compatible = "dumb-vga-dac" },
> + { .compatible = "ti,ths8135" },
> {},
> };
> MODULE_DEVICE_TABLE(of, dumb_vga_match);
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
On 13/12/16 12:09, Bartosz Golaszewski wrote:
> Add the vga-bridge node to the board DT together with corresponding
> ports and vga connector. This allows to retrieve the edid info from
> the display automatically.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
> ---
> arch/arm/boot/dts/da850-lcdk.dts | 51 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
Reviewed-by: Tomi Valkeinen <[email protected]>
Tomi
On 13/12/16 12:09, Bartosz Golaszewski wrote:
> The tilcdc node name is 'display' as per the ePAPR 1.1 recommendation.
> The label is also 'display', but change it to 'lcdc' to make it clear
> what the underlying hardware is.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> ---
> arch/arm/boot/dts/da850.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 104155d..6b0ef3d 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -458,7 +458,7 @@
> dma-names = "tx", "rx";
> };
>
> - display: display@213000 {
> + lcdc: display@213000 {
> compatible = "ti,da850-tilcdc";
> reg = <0x213000 0x1000>;
> interrupts = <52>;
>
Reviewed-by: Tomi Valkeinen <[email protected]>
Tomi