Changes in v5:
* Rebased to the latest code and fixed up a compile error due to the
mac_addr struct going away (found by David Miller)
Changes in v4:
* Added the udelays from the previous code (per David Miller)
Changes in v3:
* Reworked the init sequence patch to only remove the device reset if
the device is actually in reset. Given that this code doesn't bear
much resemblance to the original code, I'm changing the author of the
patch. This was tested on NS2 SVK.
Changes in v2:
* Reworked the first match to make it more obvious what portions of the
register were being preserved (Per Rafal Mileki)
* Style change to reorder the function variables in patch 2 (per Sergei
Shtylyov)
Bug fixes for bgmac driver
Hari Vyas (1):
net: ethernet: bgmac: mac address change bug
Jon Mason (1):
net: ethernet: bgmac: init sequence bug
drivers/net/ethernet/broadcom/bgmac-platform.c | 27 +++++++++++++++++---------
drivers/net/ethernet/broadcom/bgmac.c | 6 +++++-
drivers/net/ethernet/broadcom/bgmac.h | 16 +++++++++++++++
3 files changed, 39 insertions(+), 10 deletions(-)
--
2.7.4
From: Hari Vyas <[email protected]>
ndo_set_mac_address() passes struct sockaddr * as 2nd parameter to
bgmac_set_mac_address() but code assumed u8 *. This caused two bytes
chopping and the wrong mac address was configured.
Signed-off-by: Hari Vyas <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Fixes: 4e209001b86 ("bgmac: write mac address to hardware in ndo_set_mac_address")
---
drivers/net/ethernet/broadcom/bgmac.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 4150467..fd66fca 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -1223,12 +1223,16 @@ static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb,
static int bgmac_set_mac_address(struct net_device *net_dev, void *addr)
{
struct bgmac *bgmac = netdev_priv(net_dev);
+ struct sockaddr *sa = addr;
int ret;
ret = eth_prepare_mac_addr_change(net_dev, addr);
if (ret < 0)
return ret;
- bgmac_write_mac_address(bgmac, (u8 *)addr);
+
+ ether_addr_copy(net_dev->dev_addr, sa->sa_data);
+ bgmac_write_mac_address(bgmac, net_dev->dev_addr);
+
eth_commit_mac_addr_change(net_dev, addr);
return 0;
}
--
2.7.4
Fix a bug in the 'bgmac' driver init sequence that blind writes for init
sequence where it should preserve most bits other than the ones it is
deliberately manipulating.
The code now checks to see if the adapter needs to be brought out of
reset (where as before it was doing an IDM write to bring it out of
reset regardless of whether it was in reset or not). Also, removed
unnecessary usleeps (as there is already a read present to flush the
IDM writes).
Signed-off-by: Zac Schroff <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Fixes: f6a95a24957 ("net: ethernet: bgmac: Add platform device support")
---
drivers/net/ethernet/broadcom/bgmac-platform.c | 27 +++++++++++++++++---------
drivers/net/ethernet/broadcom/bgmac.h | 16 +++++++++++++++
2 files changed, 34 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bgmac-platform.c b/drivers/net/ethernet/broadcom/bgmac-platform.c
index 7b1af95..da1b8b2 100644
--- a/drivers/net/ethernet/broadcom/bgmac-platform.c
+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c
@@ -51,8 +51,7 @@ static void platform_bgmac_idm_write(struct bgmac *bgmac, u16 offset, u32 value)
static bool platform_bgmac_clk_enabled(struct bgmac *bgmac)
{
- if ((bgmac_idm_read(bgmac, BCMA_IOCTL) &
- (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) != BCMA_IOCTL_CLK)
+ if ((bgmac_idm_read(bgmac, BCMA_IOCTL) & BGMAC_CLK_EN) != BGMAC_CLK_EN)
return false;
if (bgmac_idm_read(bgmac, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
return false;
@@ -61,15 +60,25 @@ static bool platform_bgmac_clk_enabled(struct bgmac *bgmac)
static void platform_bgmac_clk_enable(struct bgmac *bgmac, u32 flags)
{
- bgmac_idm_write(bgmac, BCMA_IOCTL,
- (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags));
- bgmac_idm_read(bgmac, BCMA_IOCTL);
+ u32 val;
- bgmac_idm_write(bgmac, BCMA_RESET_CTL, 0);
- bgmac_idm_read(bgmac, BCMA_RESET_CTL);
- udelay(1);
+ /* The Reset Control register only contains a single bit to show if the
+ * controller is currently in reset. Do a sanity check here, just in
+ * case the bootloader happened to leave the device in reset.
+ */
+ val = bgmac_idm_read(bgmac, BCMA_RESET_CTL);
+ if (val) {
+ bgmac_idm_write(bgmac, BCMA_RESET_CTL, 0);
+ bgmac_idm_read(bgmac, BCMA_RESET_CTL);
+ udelay(1);
+ }
- bgmac_idm_write(bgmac, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+ val = bgmac_idm_read(bgmac, BCMA_IOCTL);
+ /* Some bits of BCMA_IOCTL set by HW/ATF and should not change */
+ val |= flags & ~(BGMAC_AWCACHE | BGMAC_ARCACHE | BGMAC_AWUSER |
+ BGMAC_ARUSER);
+ val |= BGMAC_CLK_EN;
+ bgmac_idm_write(bgmac, BCMA_IOCTL, val);
bgmac_idm_read(bgmac, BCMA_IOCTL);
udelay(1);
}
diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
index 248727d..6d1c6ff 100644
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -213,6 +213,22 @@
/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */
#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */
#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */
+/* The IOCTL values appear to be different in NS, NSP, and NS2, and do not match
+ * the values directly above
+ */
+#define BGMAC_CLK_EN BIT(0)
+#define BGMAC_RESERVED_0 BIT(1)
+#define BGMAC_SOURCE_SYNC_MODE_EN BIT(2)
+#define BGMAC_DEST_SYNC_MODE_EN BIT(3)
+#define BGMAC_TX_CLK_OUT_INVERT_EN BIT(4)
+#define BGMAC_DIRECT_GMII_MODE BIT(5)
+#define BGMAC_CLK_250_SEL BIT(6)
+#define BGMAC_AWCACHE (0xf << 7)
+#define BGMAC_RESERVED_1 (0x1f << 11)
+#define BGMAC_ARCACHE (0xf << 16)
+#define BGMAC_AWUSER (0x3f << 20)
+#define BGMAC_ARUSER (0x3f << 26)
+#define BGMAC_RESERVED BIT(31)
/* BCMA GMAC core specific IO status (BCMA_IOST) flags */
#define BGMAC_BCMA_IOST_ATTACHED 0x00000800
--
2.7.4
From: Jon Mason <[email protected]>
Date: Thu, 2 Mar 2017 17:59:55 -0500
> Bug fixes for bgmac driver
Series applied.