The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <[email protected]>
---
drivers/net/ethernet/sun/cassini.c | 98 +++++++++++++++++++-----------------
1 files changed, 52 insertions(+), 46 deletions(-)
diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 0e8e89f..382993c 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -691,7 +691,8 @@ static void cas_mif_poll(struct cas *cp, const int enable)
}
/* Must be invoked under cp->lock */
-static void cas_begin_auto_negotiation(struct cas *cp, struct ethtool_cmd *ep)
+static void cas_begin_auto_negotiation(struct cas *cp,
+ const struct ethtool_link_ksettings *ep)
{
u16 ctl;
#if 1
@@ -704,16 +705,16 @@ static void cas_begin_auto_negotiation(struct cas *cp, struct ethtool_cmd *ep)
if (!ep)
goto start_aneg;
lcntl = cp->link_cntl;
- if (ep->autoneg == AUTONEG_ENABLE)
+ if (ep->base.autoneg == AUTONEG_ENABLE) {
cp->link_cntl = BMCR_ANENABLE;
- else {
- u32 speed = ethtool_cmd_speed(ep);
+ } else {
+ u32 speed = ep->base.speed;
cp->link_cntl = 0;
if (speed == SPEED_100)
cp->link_cntl |= BMCR_SPEED100;
else if (speed == SPEED_1000)
cp->link_cntl |= CAS_BMCR_SPEED1000;
- if (ep->duplex == DUPLEX_FULL)
+ if (ep->base.duplex == DUPLEX_FULL)
cp->link_cntl |= BMCR_FULLDPLX;
}
#if 1
@@ -4528,19 +4529,21 @@ static void cas_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info
strlcpy(info->bus_info, pci_name(cp->pdev), sizeof(info->bus_info));
}
-static int cas_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int cas_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
{
struct cas *cp = netdev_priv(dev);
u16 bmcr;
int full_duplex, speed, pause;
unsigned long flags;
enum link_state linkstate = link_up;
+ u32 supported, advertising;
- cmd->advertising = 0;
- cmd->supported = SUPPORTED_Autoneg;
+ advertising = 0;
+ supported = SUPPORTED_Autoneg;
if (cp->cas_flags & CAS_FLAG_1000MB_CAP) {
- cmd->supported |= SUPPORTED_1000baseT_Full;
- cmd->advertising |= ADVERTISED_1000baseT_Full;
+ supported |= SUPPORTED_1000baseT_Full;
+ advertising |= ADVERTISED_1000baseT_Full;
}
/* Record PHY settings if HW is on. */
@@ -4548,17 +4551,15 @@ static int cas_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
bmcr = 0;
linkstate = cp->lstate;
if (CAS_PHY_MII(cp->phy_type)) {
- cmd->port = PORT_MII;
- cmd->transceiver = (cp->cas_flags & CAS_FLAG_SATURN) ?
- XCVR_INTERNAL : XCVR_EXTERNAL;
- cmd->phy_address = cp->phy_addr;
- cmd->advertising |= ADVERTISED_TP | ADVERTISED_MII |
+ cmd->base.port = PORT_MII;
+ cmd->base.phy_address = cp->phy_addr;
+ advertising |= ADVERTISED_TP | ADVERTISED_MII |
ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full;
- cmd->supported |=
+ supported |=
(SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
@@ -4574,11 +4575,10 @@ static int cas_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
}
} else {
- cmd->port = PORT_FIBRE;
- cmd->transceiver = XCVR_INTERNAL;
- cmd->phy_address = 0;
- cmd->supported |= SUPPORTED_FIBRE;
- cmd->advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_FIBRE;
+ cmd->base.phy_address = 0;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
if (cp->hw_running) {
/* pcs uses the same bits as mii */
@@ -4590,21 +4590,20 @@ static int cas_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
spin_unlock_irqrestore(&cp->lock, flags);
if (bmcr & BMCR_ANENABLE) {
- cmd->advertising |= ADVERTISED_Autoneg;
- cmd->autoneg = AUTONEG_ENABLE;
- ethtool_cmd_speed_set(cmd, ((speed == 10) ?
+ advertising |= ADVERTISED_Autoneg;
+ cmd->base.autoneg = AUTONEG_ENABLE;
+ cmd->base.speed = ((speed == 10) ?
SPEED_10 :
((speed == 1000) ?
- SPEED_1000 : SPEED_100)));
- cmd->duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+ SPEED_1000 : SPEED_100));
+ cmd->base.duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
} else {
- cmd->autoneg = AUTONEG_DISABLE;
- ethtool_cmd_speed_set(cmd, ((bmcr & CAS_BMCR_SPEED1000) ?
+ cmd->base.autoneg = AUTONEG_DISABLE;
+ cmd->base.speed = ((bmcr & CAS_BMCR_SPEED1000) ?
SPEED_1000 :
((bmcr & BMCR_SPEED100) ?
- SPEED_100 : SPEED_10)));
- cmd->duplex =
- (bmcr & BMCR_FULLDPLX) ?
+ SPEED_100 : SPEED_10));
+ cmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
DUPLEX_FULL : DUPLEX_HALF;
}
if (linkstate != link_up) {
@@ -4619,39 +4618,46 @@ static int cas_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
* settings that we configured.
*/
if (cp->link_cntl & BMCR_ANENABLE) {
- ethtool_cmd_speed_set(cmd, 0);
- cmd->duplex = 0xff;
+ cmd->base.speed = 0;
+ cmd->base.duplex = 0xff;
} else {
- ethtool_cmd_speed_set(cmd, SPEED_10);
+ cmd->base.speed = SPEED_10;
if (cp->link_cntl & BMCR_SPEED100) {
- ethtool_cmd_speed_set(cmd, SPEED_100);
+ cmd->base.speed = SPEED_100;
} else if (cp->link_cntl & CAS_BMCR_SPEED1000) {
- ethtool_cmd_speed_set(cmd, SPEED_1000);
+ cmd->base.speed = SPEED_1000;
}
- cmd->duplex = (cp->link_cntl & BMCR_FULLDPLX)?
+ cmd->base.duplex = (cp->link_cntl & BMCR_FULLDPLX) ?
DUPLEX_FULL : DUPLEX_HALF;
}
}
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}
-static int cas_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int cas_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct cas *cp = netdev_priv(dev);
unsigned long flags;
- u32 speed = ethtool_cmd_speed(cmd);
+ u32 speed = cmd->base.speed;
/* Verify the settings we care about. */
- if (cmd->autoneg != AUTONEG_ENABLE &&
- cmd->autoneg != AUTONEG_DISABLE)
+ if (cmd->base.autoneg != AUTONEG_ENABLE &&
+ cmd->base.autoneg != AUTONEG_DISABLE)
return -EINVAL;
- if (cmd->autoneg == AUTONEG_DISABLE &&
+ if (cmd->base.autoneg == AUTONEG_DISABLE &&
((speed != SPEED_1000 &&
speed != SPEED_100 &&
speed != SPEED_10) ||
- (cmd->duplex != DUPLEX_HALF &&
- cmd->duplex != DUPLEX_FULL)))
+ (cmd->base.duplex != DUPLEX_HALF &&
+ cmd->base.duplex != DUPLEX_FULL)))
return -EINVAL;
/* Apply settings and restart link process. */
@@ -4753,8 +4759,6 @@ static void cas_get_ethtool_stats(struct net_device *dev,
static const struct ethtool_ops cas_ethtool_ops = {
.get_drvinfo = cas_get_drvinfo,
- .get_settings = cas_get_settings,
- .set_settings = cas_set_settings,
.nway_reset = cas_nway_reset,
.get_link = cas_get_link,
.get_msglevel = cas_get_msglevel,
@@ -4764,6 +4768,8 @@ static void cas_get_ethtool_stats(struct net_device *dev,
.get_sset_count = cas_get_sset_count,
.get_strings = cas_get_strings,
.get_ethtool_stats = cas_get_ethtool_stats,
+ .get_link_ksettings = cas_get_link_ksettings,
+ .set_link_ksettings = cas_set_link_ksettings,
};
static int cas_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
--
1.7.4.4
From: Philippe Reynes <[email protected]>
Date: Sat, 4 Mar 2017 16:16:12 +0100
> The ethtool api {get|set}_settings is deprecated.
> We move this driver to new api {get|set}_link_ksettings.
>
> As I don't have the hardware, I'd be very pleased if
> someone may test this patch.
>
> Signed-off-by: Philippe Reynes <[email protected]>
Applied.