2017-03-29 09:40:45

by Gi-Oh Kim

[permalink] [raw]
Subject: [PATCH 1/2] super1: replace hard-coded values with bit definitions

Some hard-coded values for disk status are replaced
with bit definitions.

Signed-off-by: Gioh Kim <[email protected]>
---
super1.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/super1.c b/super1.c
index f3520ac..e8b9f61 100644
--- a/super1.c
+++ b/super1.c
@@ -1010,7 +1010,7 @@ static void getinfo_super1(struct supertype *st, struct mdinfo *info, char *map)
info->disk.state = 0; /* spare: not active, not sync, not faulty */
break;
case MD_DISK_ROLE_FAULTY:
- info->disk.state = 1; /* faulty */
+ info->disk.state = (1 << MD_DISK_FAULTY); /* faulty */
break;
case MD_DISK_ROLE_JOURNAL:
info->disk.state = (1 << MD_DISK_JOURNAL);
@@ -1503,11 +1503,12 @@ static int add_to_super1(struct supertype *st, mdu_disk_info_t *dk,
}

dk_state = dk->state & ~(1<<MD_DISK_FAILFAST);
- if ((dk_state & 6) == 6) /* active, sync */
+ if ((dk_state & (1<<MD_DISK_ACTIVE)) &&
+ (dk_state & (1<<MD_DISK_SYNC)))/* active, sync */
*rp = __cpu_to_le16(dk->raid_disk);
else if (dk_state & (1<<MD_DISK_JOURNAL))
*rp = MD_DISK_ROLE_JOURNAL;
- else if ((dk_state & ~2) == 0) /* active or idle -> spare */
+ else if ((dk_state & ~(1<<MD_DISK_ACTIVE)) == 0) /* active or idle -> spare */
*rp = MD_DISK_ROLE_SPARE;
else
*rp = MD_DISK_ROLE_FAULTY;
--
2.5.0


2017-03-29 09:40:47

by Gi-Oh Kim

[permalink] [raw]
Subject: [PATCH 2/2] mdadm.c: fix compile error "switch condition has boolean value"

Remove a boolean expression in switch condition
to prevent compile error of some compilers.

Signed-off-by: Gioh Kim <[email protected]>
---
mdadm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/mdadm.c b/mdadm.c
index 08ddcab..a98a051 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -1905,11 +1905,11 @@ static int misc_list(struct mddev_dev *devlist,
rv |= SetAction(dv->devname, c->action);
continue;
}
- switch(dv->devname[0] == '/') {
- case 0:
+ switch(dv->devname[0]) {
+ default:
mdfd = open_dev(dv->devname);
if (mdfd >= 0) break;
- case 1:
+ case '/':
mdfd = open_mddev(dv->devname, 1);
}
if (mdfd>=0) {
--
2.5.0

2017-03-29 15:42:50

by Jes Sorensen

[permalink] [raw]
Subject: Re: [PATCH 1/2] super1: replace hard-coded values with bit definitions

Gioh Kim <[email protected]> writes:
> Some hard-coded values for disk status are replaced
> with bit definitions.
>
> Signed-off-by: Gioh Kim <[email protected]>
> ---
> super1.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)

Applied!

Please use --cover-letter when you send out multi-commit patch sets,
which includes a short description of what the set includes. That way I
can just respond to the cover letter if all the patches are applied.

Thanks,
Jes

2017-03-29 15:49:05

by Jes Sorensen

[permalink] [raw]
Subject: Re: [PATCH 2/2] mdadm.c: fix compile error "switch condition has boolean value"

Gioh Kim <[email protected]> writes:
> Remove a boolean expression in switch condition
> to prevent compile error of some compilers.

Please be specific, which compile is unable to handle this?

> Signed-off-by: Gioh Kim <[email protected]>
> ---
> mdadm.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/mdadm.c b/mdadm.c
> index 08ddcab..a98a051 100644
> --- a/mdadm.c
> +++ b/mdadm.c
> @@ -1905,11 +1905,11 @@ static int misc_list(struct mddev_dev *devlist,
> rv |= SetAction(dv->devname, c->action);
> continue;
> }
> - switch(dv->devname[0] == '/') {
> - case 0:
> + switch(dv->devname[0]) {
> + default:
> mdfd = open_dev(dv->devname);
> if (mdfd >= 0) break;
> - case 1:
> + case '/':
> mdfd = open_mddev(dv->devname, 1);
> }
> if (mdfd>=0) {

While I agree the original code is ugly, I am not convinced your
replacement is a lot prettier.

Thanks,
Jes

2017-03-29 15:50:33

by Gi-Oh Kim

[permalink] [raw]
Subject: Re: [PATCH 2/2] mdadm.c: fix compile error "switch condition has boolean value"

On Wed, Mar 29, 2017 at 11:47:28AM -0400, [email protected] wrote:
> Gioh Kim <[email protected]> writes:
> > Remove a boolean expression in switch condition
> > to prevent compile error of some compilers.
>
> Please be specific, which compile is unable to handle this?
>
> > Signed-off-by: Gioh Kim <[email protected]>
> > ---
> > mdadm.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/mdadm.c b/mdadm.c
> > index 08ddcab..a98a051 100644
> > --- a/mdadm.c
> > +++ b/mdadm.c
> > @@ -1905,11 +1905,11 @@ static int misc_list(struct mddev_dev *devlist,
> > rv |= SetAction(dv->devname, c->action);
> > continue;
> > }
> > - switch(dv->devname[0] == '/') {
> > - case 0:
> > + switch(dv->devname[0]) {
> > + default:
> > mdfd = open_dev(dv->devname);
> > if (mdfd >= 0) break;
> > - case 1:
> > + case '/':
> > mdfd = open_mddev(dv->devname, 1);
> > }
> > if (mdfd>=0) {
>
> While I agree the original code is ugly, I am not convinced your
> replacement is a lot prettier.
>

Yes, it's not elegant ;-)
Following is my compiler version and error message.

gohkim@ws00837:~$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
5.2.1-22ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
--enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr
--program-suffix=-5 --enable-shared --enable-linker-build-id
--libexecdir=/usr/lib --without-included-gettext --enable-threads=posix
--libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--with-default-libstdcxx-abi=new --enable-gnu-unique-object
--disable-vtable-verify --enable-libmpx --enable-plugin --with-system-zlib
--disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo
--with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre --enable-java-home
--with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64
--with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
--with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar
--enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686
--with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib
--with-tune=generic --enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2)

gohkim@ws00837:~/work/tools/mdadm-mainstream$ make
cc -Wall -Werror -Wstrict-prototypes -Wextra -Wno-unused-parameter -ggdb
-DSendmail=\""/usr/sbin/sendmail -t"\" -DCONFFILE=\"/etc/mdadm.conf\"
-DCONFFILE2=\"/etc/mdadm/mdadm.conf\" -DMAP_DIR=\"/run/mdadm\"
-DMAP_FILE=\"map\" -DMDMON_DIR=\"/run/mdadm\"
-DFAILED_SLOTS_DIR=\"/run/mdadm/failed-slots\" -DNO_COROSYNC -DNO_DLM
-DVERSION=\"4.0-25-gddb13a5\" -DVERS_DATE="\"2017-03-29\"" -DUSE_PTHREADS
-DBINDIR=\"/sbin\" -c -o mdadm.o mdadm.c
mdadm.c: In function ��misc_list��:
mdadm.c:1908:10: error: switch condition has boolean value
[-Werror=switch-bool]
switch(dv->devname[0] == '/') {
^
cc1: all warnings being treated as errors
<builtin>: recipe for target 'mdadm.o' failed
make: *** [mdadm.o] Error 1


--
Best regards,
Gi-Oh Kim
TEL: 0176 2697 8962

2017-03-29 21:38:48

by NeilBrown

[permalink] [raw]
Subject: Re: [PATCH 2/2] mdadm.c: fix compile error "switch condition has boolean value"

On Thu, Mar 30 2017, [email protected] wrote:

> Gioh Kim <[email protected]> writes:
>> Remove a boolean expression in switch condition
>> to prevent compile error of some compilers.
>
> Please be specific, which compile is unable to handle this?
>
>> Signed-off-by: Gioh Kim <[email protected]>
>> ---
>> mdadm.c | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/mdadm.c b/mdadm.c
>> index 08ddcab..a98a051 100644
>> --- a/mdadm.c
>> +++ b/mdadm.c
>> @@ -1905,11 +1905,11 @@ static int misc_list(struct mddev_dev *devlist,
>> rv |= SetAction(dv->devname, c->action);
>> continue;
>> }
>> - switch(dv->devname[0] == '/') {
>> - case 0:
>> + switch(dv->devname[0]) {
>> + default:
>> mdfd = open_dev(dv->devname);
>> if (mdfd >= 0) break;
>> - case 1:
>> + case '/':
>> mdfd = open_mddev(dv->devname, 1);
>> }
>> if (mdfd>=0) {
>
> While I agree the original code is ugly, I am not convinced your
> replacement is a lot prettier.
>

Maybe

if (dv->devname[0] == '/' ||
(mdfd = open_dev(dv->devname)) < 0)
mdfd = open_mddev(dv->devname, 1);

??
NeilBrown


Attachments:
signature.asc (832.00 B)

2017-03-30 07:52:16

by Gi-Oh Kim

[permalink] [raw]
Subject: Re: [PATCH 2/2] mdadm.c: fix compile error "switch condition has boolean value"

On Thu, Mar 30, 2017 at 08:38:35AM +1100, NeilBrown wrote:
> On Thu, Mar 30 2017, [email protected] wrote:
>
> > Gioh Kim <[email protected]> writes:
> >> Remove a boolean expression in switch condition
> >> to prevent compile error of some compilers.
> >
> > Please be specific, which compile is unable to handle this?
> >
> >> Signed-off-by: Gioh Kim <[email protected]>
> >> ---
> >> mdadm.c | 6 +++---
> >> 1 file changed, 3 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/mdadm.c b/mdadm.c
> >> index 08ddcab..a98a051 100644
> >> --- a/mdadm.c
> >> +++ b/mdadm.c
> >> @@ -1905,11 +1905,11 @@ static int misc_list(struct mddev_dev *devlist,
> >> rv |= SetAction(dv->devname, c->action);
> >> continue;
> >> }
> >> - switch(dv->devname[0] == '/') {
> >> - case 0:
> >> + switch(dv->devname[0]) {
> >> + default:
> >> mdfd = open_dev(dv->devname);
> >> if (mdfd >= 0) break;
> >> - case 1:
> >> + case '/':
> >> mdfd = open_mddev(dv->devname, 1);
> >> }
> >> if (mdfd>=0) {
> >
> > While I agree the original code is ugly, I am not convinced your
> > replacement is a lot prettier.
> >
>
> Maybe
>
> if (dv->devname[0] == '/' ||
> (mdfd = open_dev(dv->devname)) < 0)
> mdfd = open_mddev(dv->devname, 1);
>
> ??
> NeilBrown

Yes, the initial version I thought was:

if (dev->devname[0] != '/')
mdfd = open_dev(dv->devname);
if (dev->devname[0] == '/' || mdfd < 0)
mdfd = open_mddev(dv->devname, 1);

But I thought you have a reason to use switch-case expression,
so I kept switch-case.
If you agree, I'll send v2 patch using if-expression.

--
Best regards,
Gi-Oh Kim
TEL: 0176 2697 8962

2017-03-30 15:54:00

by Jes Sorensen

[permalink] [raw]
Subject: Re: [PATCH 2/2] mdadm.c: fix compile error "switch condition has boolean value"

On 03/30/2017 03:52 AM, Gioh Kim wrote:
> On Thu, Mar 30, 2017 at 08:38:35AM +1100, NeilBrown wrote:
>> On Thu, Mar 30 2017, [email protected] wrote:
>>
>>> Gioh Kim <[email protected]> writes:
>>>> Remove a boolean expression in switch condition
>>>> to prevent compile error of some compilers.
>>>
>>> Please be specific, which compile is unable to handle this?
>>>
>>>> Signed-off-by: Gioh Kim <[email protected]>
>>>> ---
>>>> mdadm.c | 6 +++---
>>>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/mdadm.c b/mdadm.c
>>>> index 08ddcab..a98a051 100644
>>>> --- a/mdadm.c
>>>> +++ b/mdadm.c
>>>> @@ -1905,11 +1905,11 @@ static int misc_list(struct mddev_dev *devlist,
>>>> rv |= SetAction(dv->devname, c->action);
>>>> continue;
>>>> }
>>>> - switch(dv->devname[0] == '/') {
>>>> - case 0:
>>>> + switch(dv->devname[0]) {
>>>> + default:
>>>> mdfd = open_dev(dv->devname);
>>>> if (mdfd >= 0) break;
>>>> - case 1:
>>>> + case '/':
>>>> mdfd = open_mddev(dv->devname, 1);
>>>> }
>>>> if (mdfd>=0) {
>>>
>>> While I agree the original code is ugly, I am not convinced your
>>> replacement is a lot prettier.
>>>
>>
>> Maybe
>>
>> if (dv->devname[0] == '/' ||
>> (mdfd = open_dev(dv->devname)) < 0)
>> mdfd = open_mddev(dv->devname, 1);
>>
>> ??
>> NeilBrown
>
> Yes, the initial version I thought was:
>
> if (dev->devname[0] != '/')
> mdfd = open_dev(dv->devname);
> if (dev->devname[0] == '/' || mdfd < 0)
> mdfd = open_mddev(dv->devname, 1);
>
> But I thought you have a reason to use switch-case expression,
> so I kept switch-case.
> If you agree, I'll send v2 patch using if-expression.
>

I like this solution better, I much favor code that is more explicit in
what it does. Request less brain capacity for me to read :)

Cheers,
Jes