Hi Philipp,
On 05/24/2017 01:09 PM, Suman Anna wrote:
> Hi Philipp,
>
> This series adds a reset controller driver that uses the TI SCI protocol
> to manage resets on some TI SoCs. It is a repost of the previous v4 [1]
> submission that has already been acked by Rob and Santosh, but with some
> minor changes. This series has been waiting for the ti-sci-pm-domains
> series to make it to mainline and because of the dependencies against
> a DT header file including the device id values. The ti-sci-pm-domains
> series is now merged and available in 4.12-rc1.
>
> The main changes in v5 is to drop the include/dt-bindings/reset/k2g.h
> file based on some comments received from Arnd on a similar header usage
> in the ti-sci-pm-domains series. The ti-sci-pm-domains usage is being
> addressed in [2] and this reset series is refreshed to follow the same
> rule and drop the reset header file.
>
> Patches are on top of 4.12-rc1 plus the recent Kconfig name change on
> the TI SYSCON reset driver [3].
>
> Rob, Santosh,
> I have retained the Acks received from you on v4, but I am not sure
> since there are some minor changes to the series. Please provide any
> comments if you do not agree with the changes.
>
> regards
> Suman
>
> Changes from v4 [1]:
> - Removed the include/dt-bindings/reset/k2g.h, and updated the
> bindings document
> - Minor checkpatch fixes to the driver patch
>
> Changes from v3:
> - Addressed Rob Herring's comments
> - Added Santosh Shilimkar's Ack
>
> Changes from v2:
> - Merged DT binding patch and reset header patch
> - Added locking for reset bit mask
>
> Changes from v1:
> - Revised dt binding
> - CC Linux ARM list
>
> [1] http://marc.info/?l=devicetree&m=147976458332492&w=2
> [2] http://marc.info/?l=linux-arm-kernel&m=149547831708124&w=2
> [3] https://patchwork.kernel.org/patch/9744909/
>
> Andrew F. Davis (2):
> Documentation: dt: reset: Add TI SCI reset binding
> reset: Add the TI SCI reset driver
>
Can you pick up this series for v4.13 if there are no comments. Btw, [2]
is acked by Rob. Will appreciate if you can fixup the patch header from
"Documentation: dt: reset: ..." to "dt-bindings: reset: ..." on the
first patch when applying. Thanks in advance.
regards
Suman
Hi Suman,
On Fri, 2017-06-02 at 11:45 -0500, Suman Anna wrote:
[...]
> > [1] http://marc.info/?l=devicetree&m=147976458332492&w=2
> > [2] http://marc.info/?l=linux-arm-kernel&m=149547831708124&w=2
> > [3] https://patchwork.kernel.org/patch/9744909/
> >
> > Andrew F. Davis (2):
> > Documentation: dt: reset: Add TI SCI reset binding
> > reset: Add the TI SCI reset driver
> >
>
> Can you pick up this series for v4.13 if there are no comments. Btw, [2]
> is acked by Rob. Will appreciate if you can fixup the patch header from
> "Documentation: dt: reset: ..." to "dt-bindings: reset: ..." on the
> first patch when applying. Thanks in advance.
Thank you for the reminder, I've now applied both to the reset/next
branch. I've fixed the dt-bindings patch commit message as you suggested
and made the struct reset_control_ops const in the driver patch.
regards
Philipp