omap_uart_phys, omap_uart_virt and omap_uart_lsr reside in .data section
and it's right implementation. But because of this, we cannot enable
CONFIG_DEBUG_UNCOMPRESS. LL_DEBUG and DEBUG_UNCOMPRESS are very useful tools
for debugging early boot stage when something goes wrong if you don't have
any hardware based debugging tools like a JTAG debugger.
This patch is to put the variables into .text section instead only when the
DEBUG_LL_INCLUDE file is included in the kernel decompressor, which is only
when ZIMAGE is defined.
This patch does not change anything when DEBUG_LL_INCLUDE is included in
the other kernel parts like arch/arm/kernel/*
Signed-off-by: Hoeun Ryu <[email protected]>
---
* to mail to relevant recipients, no respond yet from them
- TO=Tony Lindgren <[email protected]>
- [email protected]
* indentical to previous patch
arch/arm/include/debug/omap2plus.S | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/include/debug/omap2plus.S b/arch/arm/include/debug/omap2plus.S
index 6d867ae..6ce6ef9 100644
--- a/arch/arm/include/debug/omap2plus.S
+++ b/arch/arm/include/debug/omap2plus.S
@@ -58,11 +58,22 @@
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
+/*
+ * Definition of ZIMAGE is in arch/arm/boot/compressed/Makefile.
+ * Place the following block in .text section only when this file is
+ * included by arch/arm/boot/compressed/* to make it possible to
+ * enable CONFIG_DEBUG_UNCOMPRESS and DEBUG in arch/arm/boot/compressed/head.S
+ * on OMAP2+ SoCs.
+ */
+#ifndef ZIMAGE
.pushsection .data
+#endif
omap_uart_phys: .word 0
omap_uart_virt: .word 0
omap_uart_lsr: .word 0
+#ifndef ZIMAGE
.popsection
+#endif
.macro addruart, rp, rv, tmp
--
2.7.4
With a patch 9a5151e1d1ba4df41bc4b8e8c0f17163247645ac, "arm:omap2+: put
omap_uart_phys/virt/lsr in .text section when ZIMAGE is true", the
dependence on DEBUG_OMAP2PLUS_UART for DEBUG_UNCOMPRESS can be dropped,
because all code of omap2+'s DEBUG_LL_INCLUDE file is in .text section when
it's included in the decompressor.
Signed-off-by: Hoeun Ryu <[email protected]>
---
* mail to relevant recipients, no response yet from them.
- add TO=Tony Lindgren <[email protected]>
- add [email protected]
* indentical to previous patch
arch/arm/Kconfig.debug | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index ba2cb63..52eb0bf 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1735,8 +1735,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
- default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
- (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
+ default y if DEBUG_LL && (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
!DEBUG_BRCMSTB_UART
help
This option influences the normal decompressor output for
--
2.7.4
Hi,
* Hoeun Ryu <[email protected]> [170612 18:18]:
> --- a/arch/arm/include/debug/omap2plus.S
> +++ b/arch/arm/include/debug/omap2plus.S
> @@ -58,11 +58,22 @@
>
> #define UART_OFFSET(addr) ((addr) & 0x00ffffff)
>
> +/*
> + * Definition of ZIMAGE is in arch/arm/boot/compressed/Makefile.
> + * Place the following block in .text section only when this file is
> + * included by arch/arm/boot/compressed/* to make it possible to
> + * enable CONFIG_DEBUG_UNCOMPRESS and DEBUG in arch/arm/boot/compressed/head.S
> + * on OMAP2+ SoCs.
> + */
> +#ifndef ZIMAGE
> .pushsection .data
> +#endif
> omap_uart_phys: .word 0
> omap_uart_virt: .word 0
> omap_uart_lsr: .word 0
> +#ifndef ZIMAGE
> .popsection
> +#endif
So I converted all these to use the 8250 debug_ll yesterday
which should solve the DEBUG_UNCOMPRESS issue for you and
allows us to remove this file. Will post the series shortly
for testing with you in Cc after I've done a bit more testing
here.
Regards,
Tony
On Tue, 2017-06-13 at 22:27 -0700, Tony Lindgren wrote:
> Hi,
>
> * Hoeun Ryu <[email protected]> [170612 18:18]:
> >
> > --- a/arch/arm/include/debug/omap2plus.S
> > +++ b/arch/arm/include/debug/omap2plus.S
> > @@ -58,11 +58,22 @@
> >
> > #define UART_OFFSET(addr) ((addr) & 0x00ffffff)
> >
> > +/*
> > + * Definition of ZIMAGE is in arch/arm/boot/compressed/Makefile.
> > + * Place the following block in .text section only when this file
> > is
> > + * included by arch/arm/boot/compressed/* to make it possible to
> > + * enable CONFIG_DEBUG_UNCOMPRESS and DEBUG in
> > arch/arm/boot/compressed/head.S
> > + * on OMAP2+ SoCs.
> > + */
> > +#ifndef ZIMAGE
> > .pushsection .data
> > +#endif
> > omap_uart_phys: .word 0
> > omap_uart_virt: .word 0
> > omap_uart_lsr: .word 0
> > +#ifndef ZIMAGE
> > .popsection
> > +#endif
> So I converted all these to use the 8250 debug_ll yesterday
> which should solve the DEBUG_UNCOMPRESS issue for you and
> allows us to remove this file. Will post the series shortly
> for testing with you in Cc after I've done a bit more testing
> here.
It sounds good.
patch 01 is dropped though, are you using the second patch ?
"[PATCH 2/2] arm:omap2+: drop dependence on DEBUG_OMAP2PLUS_UART for
DEBUG_UNCOMPRESS"
Thank you.
>
> Regards,
>
> Tony
* Hoeun Ryu <[email protected]> [170613 23:57]:
> On Tue, 2017-06-13 at 22:27 -0700, Tony Lindgren wrote:
> > So I converted all these to use the 8250 debug_ll yesterday
> > which should solve the DEBUG_UNCOMPRESS issue for you and
> > allows us to remove this file. Will post the series shortly
> > for testing with you in Cc after I've done a bit more testing
> > here.
>
> It sounds good.
> patch 01 is dropped though, are you using the second patch ?
> "[PATCH 2/2] arm:omap2+: drop dependence on DEBUG_OMAP2PLUS_UART for
> DEBUG_UNCOMPRESS"
I folded it into the patch removing all users of DEBUG_OMAP2PLUS_UART
as that seems to make most sense here.
Regards,
Tony