This patch uses WARN level is not printed by default.
In some cases, some boards have always met the unused log be printed as
follows.
...
[23193.523182] mwifiex_pcie 0000:01:00.0: mwifiex_get_cfp:
cannot find cfp by band 2 & channel=13 freq=0
[23378.633684] mwifiex_pcie 0000:01:00.0: mwifiex_get_cfp:
cannot find cfp by band 2 & channel=13 freq=0
Due to we used the wifi default area was US and didn't support 12~14
channels. As Frequencies:
* 2412 MHz [1] (30.0 dBm)
* 2417 MHz [2] (30.0 dBm)
* 2422 MHz [3] (30.0 dBm)
* 2427 MHz [4] (30.0 dBm)
* 2432 MHz [5] (30.0 dBm)
* 2437 MHz [6] (30.0 dBm)
* 2442 MHz [7] (30.0 dBm)
* 2447 MHz [8] (30.0 dBm)
* 2452 MHz [9] (30.0 dBm)
* 2457 MHz [10] (30.0 dBm)
* 2462 MHz [11] (30.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Also, as the commit 1b499cb72f26b
("mwifiex: disable channel filtering feature in firmware"), it proved to
be a feature to get better scan result from overlapping channel.
Even there could be AP from overlapping channel (might be 12/13/14
in this case), it will be filtered depend on reg domain rules.
e.g:
...
if (ch->flags & IEEE80211_CHAN_DISABLED)
continue;
So it should not been an ERROR, use the WARN level to instead it for now.
Signed-off-by: Caesar Wang <[email protected]>
Acked-by: Xinming Hu <[email protected]>
---
Changes in v2:
- Fixes the commit and title as Kalle and Xinming comments on
https://patchwork.kernel.org/patch/9786047/
- Add the Acked by "HU Xinming"
drivers/net/wireless/marvell/mwifiex/cfp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cfp.c b/drivers/net/wireless/marvell/mwifiex/cfp.c
index 1ff2205..6e29943 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfp.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfp.c
@@ -350,7 +350,7 @@ mwifiex_get_cfp(struct mwifiex_private *priv, u8 band, u16 channel, u32 freq)
}
}
if (i == sband->n_channels) {
- mwifiex_dbg(priv->adapter, ERROR,
+ mwifiex_dbg(priv->adapter, WARN,
"%s: cannot find cfp by band %d\t"
"& channel=%d freq=%d\n",
__func__, band, channel, freq);
--
2.7.4
Caesar Wang <[email protected]> wrote:
> This patch uses WARN level is not printed by default.
>
> In some cases, some boards have always met the unused log be printed as
> follows.
> ...
> [23193.523182] mwifiex_pcie 0000:01:00.0: mwifiex_get_cfp:
> cannot find cfp by band 2 & channel=13 freq=0
> [23378.633684] mwifiex_pcie 0000:01:00.0: mwifiex_get_cfp:
> cannot find cfp by band 2 & channel=13 freq=0
>
> Due to we used the wifi default area was US and didn't support 12~14
> channels. As Frequencies:
> * 2412 MHz [1] (30.0 dBm)
> * 2417 MHz [2] (30.0 dBm)
> * 2422 MHz [3] (30.0 dBm)
> * 2427 MHz [4] (30.0 dBm)
> * 2432 MHz [5] (30.0 dBm)
> * 2437 MHz [6] (30.0 dBm)
> * 2442 MHz [7] (30.0 dBm)
> * 2447 MHz [8] (30.0 dBm)
> * 2452 MHz [9] (30.0 dBm)
> * 2457 MHz [10] (30.0 dBm)
> * 2462 MHz [11] (30.0 dBm)
> * 2467 MHz [12] (disabled)
> * 2472 MHz [13] (disabled)
> * 2484 MHz [14] (disabled)
>
> Also, as the commit 1b499cb72f26b
> ("mwifiex: disable channel filtering feature in firmware"), it proved to
> be a feature to get better scan result from overlapping channel.
>
> Even there could be AP from overlapping channel (might be 12/13/14
> in this case), it will be filtered depend on reg domain rules.
> e.g:
> ...
> if (ch->flags & IEEE80211_CHAN_DISABLED)
> continue;
>
> So it should not been an ERROR, use the WARN level to instead it for now.
>
> Signed-off-by: Caesar Wang <[email protected]>
> Acked-by: Xinming Hu <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
421ba82c676b mwifiex: fixes the unexpected be printed log by default
--
https://patchwork.kernel.org/patch/9786123/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches