This patch-set adds support of the Serial Audio Interface (SAI) IP on H7 STM32 platform family.
olivier moysan (2):
dt-bindings: stm32: add h7 support for sai
ASoC: stm32: sai: add h7 support
.../devicetree/bindings/sound/st,stm32-sai.txt | 18 ++---
sound/soc/stm/stm32_sai.c | 13 ++-
sound/soc/stm/stm32_sai.h | 72 +++++++++++++++--
sound/soc/stm/stm32_sai_sub.c | 92 ++++++++++++++++++----
4 files changed, 164 insertions(+), 31 deletions(-)
--
1.9.1
Document device tree bindings for STM32H7 SAI.
Signed-off-by: olivier moysan <[email protected]>
---
.../devicetree/bindings/sound/st,stm32-sai.txt | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index a0feeed..f1c5ae5 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -6,7 +6,7 @@ The SAI contains two independent audio sub-blocks. Each sub-block has
its own clock generator and I/O lines controller.
Required properties:
- - compatible: Should be "st,stm32f4-sai"
+ - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
- reg: Base address and size of SAI common register set.
- clocks: Must contain phandle and clock specifier pairs for each entry
in clock-names.
@@ -47,24 +47,24 @@ sound_card {
};
sai1: sai1@40015800 {
- compatible = "st,stm32f4-sai";
+ compatible = "st,stm32h7-sai";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40015800 0x400>;
reg = <0x40015800 0x4>;
- clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
+ clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
clock-names = "x8k", "x11k";
interrupts = <87>;
- sai1b: audio-controller@40015824 {
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1C>;
- clocks = <&rcc 1 CLK_SAI2>;
+ sai1a: audio-controller@40015804 {
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x1C>;
+ clocks = <&rcc SAI1_CK>;
clock-names = "sai_ck";
- dmas = <&dma2 5 0 0x400 0x0>;
+ dmas = <&dmamux1 1 87 0x400 0x0>;
dma-names = "tx";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai1b>;
+ pinctrl-0 = <&pinctrl_sai1a>;
sai1b_port: port {
cpu_endpoint: endpoint {
--
1.9.1
Add support of SAI on STM32H7 family.
Signed-off-by: olivier moysan <[email protected]>
---
sound/soc/stm/stm32_sai.c | 13 +++++-
sound/soc/stm/stm32_sai.h | 72 ++++++++++++++++++++++++++++++---
sound/soc/stm/stm32_sai_sub.c | 92 ++++++++++++++++++++++++++++++++++++-------
3 files changed, 155 insertions(+), 22 deletions(-)
diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
index 6159d66..f771331 100644
--- a/sound/soc/stm/stm32_sai.c
+++ b/sound/soc/stm/stm32_sai.c
@@ -27,8 +27,17 @@
#include "stm32_sai.h"
+static const struct stm32_sai_conf stm32_sai_conf_f4 = {
+ .version = SAI_STM32F4,
+};
+
+static const struct stm32_sai_conf stm32_sai_conf_h7 = {
+ .version = SAI_STM32H7,
+};
+
static const struct of_device_id stm32_sai_ids[] = {
- { .compatible = "st,stm32f4-sai", .data = (void *)SAI_STM32F4 },
+ { .compatible = "st,stm32f4-sai", .data = (void *)&stm32_sai_conf_f4 },
+ { .compatible = "st,stm32h7-sai", .data = (void *)&stm32_sai_conf_h7 },
{}
};
@@ -52,7 +61,7 @@ static int stm32_sai_probe(struct platform_device *pdev)
of_id = of_match_device(stm32_sai_ids, &pdev->dev);
if (of_id)
- sai->version = (enum stm32_sai_version)of_id->data;
+ sai->conf = (struct stm32_sai_conf *)of_id->data;
else
return -EINVAL;
diff --git a/sound/soc/stm/stm32_sai.h b/sound/soc/stm/stm32_sai.h
index 270be93..889974dc 100644
--- a/sound/soc/stm/stm32_sai.h
+++ b/sound/soc/stm/stm32_sai.h
@@ -31,6 +31,10 @@
#define STM_SAI_CLRFR_REGX 0x18
#define STM_SAI_DR_REGX 0x1C
+/* Sub-block A registers, relative to sub-block A address */
+#define STM_SAI_PDMCR_REGX 0x40
+#define STM_SAI_PDMLY_REGX 0x44
+
/******************** Bit definition for SAI_GCR register *******************/
#define SAI_GCR_SYNCIN_SHIFT 0
#define SAI_GCR_SYNCIN_MASK GENMASK(1, SAI_GCR_SYNCIN_SHIFT)
@@ -75,10 +79,11 @@
#define SAI_XCR1_NODIV BIT(SAI_XCR1_NODIV_SHIFT)
#define SAI_XCR1_MCKDIV_SHIFT 20
-#define SAI_XCR1_MCKDIV_WIDTH 4
-#define SAI_XCR1_MCKDIV_MASK GENMASK(24, SAI_XCR1_MCKDIV_SHIFT)
+#define SAI_XCR1_MCKDIV_WIDTH(x) (((x) == SAI_STM32F4) ? 4 : 6)
+#define SAI_XCR1_MCKDIV_MASK(x) GENMASK((SAI_XCR1_MCKDIV_SHIFT + (x) - 1),\
+ SAI_XCR1_MCKDIV_SHIFT)
#define SAI_XCR1_MCKDIV_SET(x) ((x) << SAI_XCR1_MCKDIV_SHIFT)
-#define SAI_XCR1_MCKDIV_MAX ((1 << SAI_XCR1_MCKDIV_WIDTH) - 1)
+#define SAI_XCR1_MCKDIV_MAX(x) ((1 << SAI_XCR1_MCKDIV_WIDTH(x)) - 1)
#define SAI_XCR1_OSR_SHIFT 26
#define SAI_XCR1_OSR BIT(SAI_XCR1_OSR_SHIFT)
@@ -178,8 +183,65 @@
#define SAI_XCLRFR_SHIFT 0
#define SAI_XCLRFR_MASK GENMASK(6, SAI_XCLRFR_SHIFT)
+/****************** Bit definition for SAI_PDMCR register ******************/
+#define SAI_PDMCR_PDMEN BIT(0)
+
+#define SAI_PDMCR_MICNBR_SHIFT 4
+#define SAI_PDMCR_MICNBR_MASK GENMASK(5, SAI_PDMCR_MICNBR_SHIFT)
+#define SAI_PDMCR_MICNBR_SET(x) ((x) << SAI_PDMCR_MICNBR_SHIFT)
+
+#define SAI_PDMCR_CKEN1 BIT(8)
+#define SAI_PDMCR_CKEN2 BIT(9)
+#define SAI_PDMCR_CKEN3 BIT(10)
+#define SAI_PDMCR_CKEN4 BIT(11)
+
+/****************** Bit definition for (SAI_PDMDLY register ****************/
+#define SAI_PDMDLY_1L_SHIFT 0
+#define SAI_PDMDLY_1L_MASK GENMASK(2, SAI_PDMDLY_1L_SHIFT)
+#define SAI_PDMDLY_1L_WIDTH 3
+
+#define SAI_PDMDLY_1R_SHIFT 4
+#define SAI_PDMDLY_1R_MASK GENMASK(6, SAI_PDMDLY_1R_SHIFT)
+#define SAI_PDMDLY_1R_WIDTH 3
+
+#define SAI_PDMDLY_2L_SHIFT 8
+#define SAI_PDMDLY_2L_MASK GENMASK(10, SAI_PDMDLY_2L_SHIFT)
+#define SAI_PDMDLY_2L_WIDTH 3
+
+#define SAI_PDMDLY_2R_SHIFT 12
+#define SAI_PDMDLY_2R_MASK GENMASK(14, SAI_PDMDLY_2R_SHIFT)
+#define SAI_PDMDLY_2R_WIDTH 3
+
+#define SAI_PDMDLY_3L_SHIFT 16
+#define SAI_PDMDLY_3L_MASK GENMASK(18, SAI_PDMDLY_3L_SHIFT)
+#define SAI_PDMDLY_3L_WIDTH 3
+
+#define SAI_PDMDLY_3R_SHIFT 20
+#define SAI_PDMDLY_3R_MASK GENMASK(22, SAI_PDMDLY_3R_SHIFT)
+#define SAI_PDMDLY_3R_WIDTH 3
+
+#define SAI_PDMDLY_4L_SHIFT 24
+#define SAI_PDMDLY_4L_MASK GENMASK(26, SAI_PDMDLY_4L_SHIFT)
+#define SAI_PDMDLY_4L_WIDTH 3
+
+#define SAI_PDMDLY_4R_SHIFT 28
+#define SAI_PDMDLY_4R_MASK GENMASK(30, SAI_PDMDLY_4R_SHIFT)
+#define SAI_PDMDLY_4R_WIDTH 3
+
+#define STM_SAI_IS_F4(ip) ((ip)->conf->version == SAI_STM32F4)
+#define STM_SAI_IS_H7(ip) ((ip)->conf->version == SAI_STM32H7)
+
enum stm32_sai_version {
- SAI_STM32F4
+ SAI_STM32F4,
+ SAI_STM32H7
+};
+
+/**
+ * struct stm32_sai_conf - SAI configuration
+ * @version: SAI version
+ */
+struct stm32_sai_conf {
+ int version;
};
/**
@@ -194,6 +256,6 @@ struct stm32_sai_data {
struct platform_device *pdev;
struct clk *clk_x8k;
struct clk *clk_x11k;
- int version;
+ struct stm32_sai_conf *conf;
int irq;
};
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index ce48c02..ba3fdc7 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -51,12 +51,15 @@
#define STM_SAI_A_ID 0x0
#define STM_SAI_B_ID 0x1
+#define STM_SAI_IS_SUB_A(x) ((x)->id == STM_SAI_A_ID)
+#define STM_SAI_IS_SUB_B(x) ((x)->id == STM_SAI_B_ID)
#define STM_SAI_BLOCK_NAME(x) (((x)->id == STM_SAI_A_ID) ? "A" : "B")
/**
* struct stm32_sai_sub_data - private data of SAI sub block (block A or B)
* @pdev: device data pointer
* @regmap: SAI register map pointer
+ * @regmap_config: SAI sub block register map configuration pointer
* @dma_params: dma configuration data for rx or tx channel
* @cpu_dai_drv: DAI driver data pointer
* @cpu_dai: DAI runtime data pointer
@@ -79,6 +82,7 @@
struct stm32_sai_sub_data {
struct platform_device *pdev;
struct regmap *regmap;
+ const struct regmap_config *regmap_config;
struct snd_dmaengine_dai_dma_data dma_params;
struct snd_soc_dai_driver *cpu_dai_drv;
struct snd_soc_dai *cpu_dai;
@@ -118,6 +122,8 @@ static bool stm32_sai_sub_readable_reg(struct device *dev, unsigned int reg)
case STM_SAI_SR_REGX:
case STM_SAI_CLRFR_REGX:
case STM_SAI_DR_REGX:
+ case STM_SAI_PDMCR_REGX:
+ case STM_SAI_PDMLY_REGX:
return true;
default:
return false;
@@ -145,13 +151,15 @@ static bool stm32_sai_sub_writeable_reg(struct device *dev, unsigned int reg)
case STM_SAI_SR_REGX:
case STM_SAI_CLRFR_REGX:
case STM_SAI_DR_REGX:
+ case STM_SAI_PDMCR_REGX:
+ case STM_SAI_PDMLY_REGX:
return true;
default:
return false;
}
}
-static const struct regmap_config stm32_sai_sub_regmap_config = {
+static const struct regmap_config stm32_sai_sub_regmap_config_f4 = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
@@ -162,6 +170,17 @@ static bool stm32_sai_sub_writeable_reg(struct device *dev, unsigned int reg)
.fast_io = true,
};
+static const struct regmap_config stm32_sai_sub_regmap_config_h7 = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = STM_SAI_PDMLY_REGX,
+ .readable_reg = stm32_sai_sub_readable_reg,
+ .volatile_reg = stm32_sai_sub_volatile_reg,
+ .writeable_reg = stm32_sai_sub_writeable_reg,
+ .fast_io = true,
+};
+
static irqreturn_t stm32_sai_isr(int irq, void *devid)
{
struct stm32_sai_sub_data *sai = (struct stm32_sai_sub_data *)devid;
@@ -551,7 +570,8 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai,
{
struct stm32_sai_sub_data *sai = snd_soc_dai_get_drvdata(cpu_dai);
int cr1, mask, div = 0;
- int sai_clk_rate, ret;
+ int sai_clk_rate, mclk_ratio, den, ret;
+ int version = sai->pdata->conf->version;
if (!sai->mclk_rate) {
dev_err(cpu_dai->dev, "Mclk rate is null\n");
@@ -564,22 +584,54 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai,
clk_set_parent(sai->sai_ck, sai->pdata->clk_x8k);
sai_clk_rate = clk_get_rate(sai->sai_ck);
- /*
- * mclk_rate = 256 * fs
- * MCKDIV = 0 if sai_ck < 3/2 * mclk_rate
- * MCKDIV = sai_ck / (2 * mclk_rate) otherwise
- */
- if (2 * sai_clk_rate >= 3 * sai->mclk_rate)
- div = DIV_ROUND_CLOSEST(sai_clk_rate, 2 * sai->mclk_rate);
-
- if (div > SAI_XCR1_MCKDIV_MAX) {
+ if (STM_SAI_IS_F4(sai->pdata)) {
+ /*
+ * mclk_rate = 256 * fs
+ * MCKDIV = 0 if sai_ck < 3/2 * mclk_rate
+ * MCKDIV = sai_ck / (2 * mclk_rate) otherwise
+ */
+ if (2 * sai_clk_rate >= 3 * sai->mclk_rate)
+ div = DIV_ROUND_CLOSEST(sai_clk_rate,
+ 2 * sai->mclk_rate);
+ } else {
+ /*
+ * TDM mode :
+ * mclk on
+ * MCKDIV = sai_ck / (ws x 256) (NOMCK=0. OSR=0)
+ * MCKDIV = sai_ck / (ws x 512) (NOMCK=0. OSR=1)
+ * mclk off
+ * MCKDIV = sai_ck / (frl x ws) (NOMCK=1)
+ * Note: NOMCK/NODIV correspond to same bit.
+ */
+ if (sai->mclk_rate) {
+ mclk_ratio = sai->mclk_rate / params_rate(params);
+ if (mclk_ratio != 256) {
+ if (mclk_ratio == 512) {
+ mask = SAI_XCR1_OSR;
+ cr1 = SAI_XCR1_OSR;
+ } else {
+ dev_err(cpu_dai->dev,
+ "Wrong mclk ratio %d\n",
+ mclk_ratio);
+ return -EINVAL;
+ }
+ }
+ div = DIV_ROUND_CLOSEST(sai_clk_rate, sai->mclk_rate);
+ } else {
+ /* mclk-fs not set, master clock not active. NOMCK=1 */
+ den = sai->fs_length * params_rate(params);
+ div = DIV_ROUND_CLOSEST(sai_clk_rate, den);
+ }
+ }
+
+ if (div > SAI_XCR1_MCKDIV_MAX(version)) {
dev_err(cpu_dai->dev, "Divider %d out of range\n", div);
return -EINVAL;
}
dev_dbg(cpu_dai->dev, "SAI clock %d, divider %d\n", sai_clk_rate, div);
- mask = SAI_XCR1_MCKDIV_MASK;
- cr1 = SAI_XCR1_MCKDIV_SET(div);
+ mask = SAI_XCR1_MCKDIV_MASK(SAI_XCR1_MCKDIV_WIDTH(version));
+ cr1 = SAI_XCR1_MCKDIV_SET(div);
ret = regmap_update_bits(sai->regmap, STM_SAI_CR1_REGX, mask, cr1);
if (ret < 0) {
dev_err(cpu_dai->dev, "Failed to update CR1 register\n");
@@ -780,8 +832,18 @@ static int stm32_sai_sub_parse_of(struct platform_device *pdev,
return PTR_ERR(base);
sai->phys_addr = res->start;
- sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "sai_ck", base,
- &stm32_sai_sub_regmap_config);
+
+ sai->regmap_config = &stm32_sai_sub_regmap_config_f4;
+ /* Note: PDM registers not available for H7 sub-block B */
+ if (STM_SAI_IS_H7(sai->pdata) && STM_SAI_IS_SUB_A(sai))
+ sai->regmap_config = &stm32_sai_sub_regmap_config_h7;
+
+ sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "sai_ck",
+ base, sai->regmap_config);
+ if (IS_ERR(sai->regmap)) {
+ dev_err(&pdev->dev, "Failed to initialize MMIO\n");
+ return PTR_ERR(sai->regmap);
+ }
/* Get direction property */
if (of_property_match_string(np, "dma-names", "tx") >= 0) {
--
1.9.1
The patch
ASoC: stm32: sai: add h7 support
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From fe09d505b0827354c22c2efc0cf41167a8a016cc Mon Sep 17 00:00:00 2001
From: olivier moysan <[email protected]>
Date: Fri, 16 Jun 2017 14:16:24 +0200
Subject: [PATCH] ASoC: stm32: sai: add h7 support
Add support of SAI on STM32H7 family.
Signed-off-by: olivier moysan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/stm/stm32_sai.c | 13 +++++-
sound/soc/stm/stm32_sai.h | 72 ++++++++++++++++++++++++++++++---
sound/soc/stm/stm32_sai_sub.c | 92 ++++++++++++++++++++++++++++++++++++-------
3 files changed, 155 insertions(+), 22 deletions(-)
diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
index 6159d66c2c54..f7713314913b 100644
--- a/sound/soc/stm/stm32_sai.c
+++ b/sound/soc/stm/stm32_sai.c
@@ -27,8 +27,17 @@
#include "stm32_sai.h"
+static const struct stm32_sai_conf stm32_sai_conf_f4 = {
+ .version = SAI_STM32F4,
+};
+
+static const struct stm32_sai_conf stm32_sai_conf_h7 = {
+ .version = SAI_STM32H7,
+};
+
static const struct of_device_id stm32_sai_ids[] = {
- { .compatible = "st,stm32f4-sai", .data = (void *)SAI_STM32F4 },
+ { .compatible = "st,stm32f4-sai", .data = (void *)&stm32_sai_conf_f4 },
+ { .compatible = "st,stm32h7-sai", .data = (void *)&stm32_sai_conf_h7 },
{}
};
@@ -52,7 +61,7 @@ static int stm32_sai_probe(struct platform_device *pdev)
of_id = of_match_device(stm32_sai_ids, &pdev->dev);
if (of_id)
- sai->version = (enum stm32_sai_version)of_id->data;
+ sai->conf = (struct stm32_sai_conf *)of_id->data;
else
return -EINVAL;
diff --git a/sound/soc/stm/stm32_sai.h b/sound/soc/stm/stm32_sai.h
index 270be93b845e..889974dc62d9 100644
--- a/sound/soc/stm/stm32_sai.h
+++ b/sound/soc/stm/stm32_sai.h
@@ -31,6 +31,10 @@
#define STM_SAI_CLRFR_REGX 0x18
#define STM_SAI_DR_REGX 0x1C
+/* Sub-block A registers, relative to sub-block A address */
+#define STM_SAI_PDMCR_REGX 0x40
+#define STM_SAI_PDMLY_REGX 0x44
+
/******************** Bit definition for SAI_GCR register *******************/
#define SAI_GCR_SYNCIN_SHIFT 0
#define SAI_GCR_SYNCIN_MASK GENMASK(1, SAI_GCR_SYNCIN_SHIFT)
@@ -75,10 +79,11 @@
#define SAI_XCR1_NODIV BIT(SAI_XCR1_NODIV_SHIFT)
#define SAI_XCR1_MCKDIV_SHIFT 20
-#define SAI_XCR1_MCKDIV_WIDTH 4
-#define SAI_XCR1_MCKDIV_MASK GENMASK(24, SAI_XCR1_MCKDIV_SHIFT)
+#define SAI_XCR1_MCKDIV_WIDTH(x) (((x) == SAI_STM32F4) ? 4 : 6)
+#define SAI_XCR1_MCKDIV_MASK(x) GENMASK((SAI_XCR1_MCKDIV_SHIFT + (x) - 1),\
+ SAI_XCR1_MCKDIV_SHIFT)
#define SAI_XCR1_MCKDIV_SET(x) ((x) << SAI_XCR1_MCKDIV_SHIFT)
-#define SAI_XCR1_MCKDIV_MAX ((1 << SAI_XCR1_MCKDIV_WIDTH) - 1)
+#define SAI_XCR1_MCKDIV_MAX(x) ((1 << SAI_XCR1_MCKDIV_WIDTH(x)) - 1)
#define SAI_XCR1_OSR_SHIFT 26
#define SAI_XCR1_OSR BIT(SAI_XCR1_OSR_SHIFT)
@@ -178,8 +183,65 @@
#define SAI_XCLRFR_SHIFT 0
#define SAI_XCLRFR_MASK GENMASK(6, SAI_XCLRFR_SHIFT)
+/****************** Bit definition for SAI_PDMCR register ******************/
+#define SAI_PDMCR_PDMEN BIT(0)
+
+#define SAI_PDMCR_MICNBR_SHIFT 4
+#define SAI_PDMCR_MICNBR_MASK GENMASK(5, SAI_PDMCR_MICNBR_SHIFT)
+#define SAI_PDMCR_MICNBR_SET(x) ((x) << SAI_PDMCR_MICNBR_SHIFT)
+
+#define SAI_PDMCR_CKEN1 BIT(8)
+#define SAI_PDMCR_CKEN2 BIT(9)
+#define SAI_PDMCR_CKEN3 BIT(10)
+#define SAI_PDMCR_CKEN4 BIT(11)
+
+/****************** Bit definition for (SAI_PDMDLY register ****************/
+#define SAI_PDMDLY_1L_SHIFT 0
+#define SAI_PDMDLY_1L_MASK GENMASK(2, SAI_PDMDLY_1L_SHIFT)
+#define SAI_PDMDLY_1L_WIDTH 3
+
+#define SAI_PDMDLY_1R_SHIFT 4
+#define SAI_PDMDLY_1R_MASK GENMASK(6, SAI_PDMDLY_1R_SHIFT)
+#define SAI_PDMDLY_1R_WIDTH 3
+
+#define SAI_PDMDLY_2L_SHIFT 8
+#define SAI_PDMDLY_2L_MASK GENMASK(10, SAI_PDMDLY_2L_SHIFT)
+#define SAI_PDMDLY_2L_WIDTH 3
+
+#define SAI_PDMDLY_2R_SHIFT 12
+#define SAI_PDMDLY_2R_MASK GENMASK(14, SAI_PDMDLY_2R_SHIFT)
+#define SAI_PDMDLY_2R_WIDTH 3
+
+#define SAI_PDMDLY_3L_SHIFT 16
+#define SAI_PDMDLY_3L_MASK GENMASK(18, SAI_PDMDLY_3L_SHIFT)
+#define SAI_PDMDLY_3L_WIDTH 3
+
+#define SAI_PDMDLY_3R_SHIFT 20
+#define SAI_PDMDLY_3R_MASK GENMASK(22, SAI_PDMDLY_3R_SHIFT)
+#define SAI_PDMDLY_3R_WIDTH 3
+
+#define SAI_PDMDLY_4L_SHIFT 24
+#define SAI_PDMDLY_4L_MASK GENMASK(26, SAI_PDMDLY_4L_SHIFT)
+#define SAI_PDMDLY_4L_WIDTH 3
+
+#define SAI_PDMDLY_4R_SHIFT 28
+#define SAI_PDMDLY_4R_MASK GENMASK(30, SAI_PDMDLY_4R_SHIFT)
+#define SAI_PDMDLY_4R_WIDTH 3
+
+#define STM_SAI_IS_F4(ip) ((ip)->conf->version == SAI_STM32F4)
+#define STM_SAI_IS_H7(ip) ((ip)->conf->version == SAI_STM32H7)
+
enum stm32_sai_version {
- SAI_STM32F4
+ SAI_STM32F4,
+ SAI_STM32H7
+};
+
+/**
+ * struct stm32_sai_conf - SAI configuration
+ * @version: SAI version
+ */
+struct stm32_sai_conf {
+ int version;
};
/**
@@ -194,6 +256,6 @@ struct stm32_sai_data {
struct platform_device *pdev;
struct clk *clk_x8k;
struct clk *clk_x11k;
- int version;
+ struct stm32_sai_conf *conf;
int irq;
};
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index ce48c02db051..ba3fdc777ed8 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -51,12 +51,15 @@
#define STM_SAI_A_ID 0x0
#define STM_SAI_B_ID 0x1
+#define STM_SAI_IS_SUB_A(x) ((x)->id == STM_SAI_A_ID)
+#define STM_SAI_IS_SUB_B(x) ((x)->id == STM_SAI_B_ID)
#define STM_SAI_BLOCK_NAME(x) (((x)->id == STM_SAI_A_ID) ? "A" : "B")
/**
* struct stm32_sai_sub_data - private data of SAI sub block (block A or B)
* @pdev: device data pointer
* @regmap: SAI register map pointer
+ * @regmap_config: SAI sub block register map configuration pointer
* @dma_params: dma configuration data for rx or tx channel
* @cpu_dai_drv: DAI driver data pointer
* @cpu_dai: DAI runtime data pointer
@@ -79,6 +82,7 @@
struct stm32_sai_sub_data {
struct platform_device *pdev;
struct regmap *regmap;
+ const struct regmap_config *regmap_config;
struct snd_dmaengine_dai_dma_data dma_params;
struct snd_soc_dai_driver *cpu_dai_drv;
struct snd_soc_dai *cpu_dai;
@@ -118,6 +122,8 @@ static bool stm32_sai_sub_readable_reg(struct device *dev, unsigned int reg)
case STM_SAI_SR_REGX:
case STM_SAI_CLRFR_REGX:
case STM_SAI_DR_REGX:
+ case STM_SAI_PDMCR_REGX:
+ case STM_SAI_PDMLY_REGX:
return true;
default:
return false;
@@ -145,13 +151,15 @@ static bool stm32_sai_sub_writeable_reg(struct device *dev, unsigned int reg)
case STM_SAI_SR_REGX:
case STM_SAI_CLRFR_REGX:
case STM_SAI_DR_REGX:
+ case STM_SAI_PDMCR_REGX:
+ case STM_SAI_PDMLY_REGX:
return true;
default:
return false;
}
}
-static const struct regmap_config stm32_sai_sub_regmap_config = {
+static const struct regmap_config stm32_sai_sub_regmap_config_f4 = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
@@ -162,6 +170,17 @@ static const struct regmap_config stm32_sai_sub_regmap_config = {
.fast_io = true,
};
+static const struct regmap_config stm32_sai_sub_regmap_config_h7 = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = STM_SAI_PDMLY_REGX,
+ .readable_reg = stm32_sai_sub_readable_reg,
+ .volatile_reg = stm32_sai_sub_volatile_reg,
+ .writeable_reg = stm32_sai_sub_writeable_reg,
+ .fast_io = true,
+};
+
static irqreturn_t stm32_sai_isr(int irq, void *devid)
{
struct stm32_sai_sub_data *sai = (struct stm32_sai_sub_data *)devid;
@@ -551,7 +570,8 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai,
{
struct stm32_sai_sub_data *sai = snd_soc_dai_get_drvdata(cpu_dai);
int cr1, mask, div = 0;
- int sai_clk_rate, ret;
+ int sai_clk_rate, mclk_ratio, den, ret;
+ int version = sai->pdata->conf->version;
if (!sai->mclk_rate) {
dev_err(cpu_dai->dev, "Mclk rate is null\n");
@@ -564,22 +584,54 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai,
clk_set_parent(sai->sai_ck, sai->pdata->clk_x8k);
sai_clk_rate = clk_get_rate(sai->sai_ck);
- /*
- * mclk_rate = 256 * fs
- * MCKDIV = 0 if sai_ck < 3/2 * mclk_rate
- * MCKDIV = sai_ck / (2 * mclk_rate) otherwise
- */
- if (2 * sai_clk_rate >= 3 * sai->mclk_rate)
- div = DIV_ROUND_CLOSEST(sai_clk_rate, 2 * sai->mclk_rate);
-
- if (div > SAI_XCR1_MCKDIV_MAX) {
+ if (STM_SAI_IS_F4(sai->pdata)) {
+ /*
+ * mclk_rate = 256 * fs
+ * MCKDIV = 0 if sai_ck < 3/2 * mclk_rate
+ * MCKDIV = sai_ck / (2 * mclk_rate) otherwise
+ */
+ if (2 * sai_clk_rate >= 3 * sai->mclk_rate)
+ div = DIV_ROUND_CLOSEST(sai_clk_rate,
+ 2 * sai->mclk_rate);
+ } else {
+ /*
+ * TDM mode :
+ * mclk on
+ * MCKDIV = sai_ck / (ws x 256) (NOMCK=0. OSR=0)
+ * MCKDIV = sai_ck / (ws x 512) (NOMCK=0. OSR=1)
+ * mclk off
+ * MCKDIV = sai_ck / (frl x ws) (NOMCK=1)
+ * Note: NOMCK/NODIV correspond to same bit.
+ */
+ if (sai->mclk_rate) {
+ mclk_ratio = sai->mclk_rate / params_rate(params);
+ if (mclk_ratio != 256) {
+ if (mclk_ratio == 512) {
+ mask = SAI_XCR1_OSR;
+ cr1 = SAI_XCR1_OSR;
+ } else {
+ dev_err(cpu_dai->dev,
+ "Wrong mclk ratio %d\n",
+ mclk_ratio);
+ return -EINVAL;
+ }
+ }
+ div = DIV_ROUND_CLOSEST(sai_clk_rate, sai->mclk_rate);
+ } else {
+ /* mclk-fs not set, master clock not active. NOMCK=1 */
+ den = sai->fs_length * params_rate(params);
+ div = DIV_ROUND_CLOSEST(sai_clk_rate, den);
+ }
+ }
+
+ if (div > SAI_XCR1_MCKDIV_MAX(version)) {
dev_err(cpu_dai->dev, "Divider %d out of range\n", div);
return -EINVAL;
}
dev_dbg(cpu_dai->dev, "SAI clock %d, divider %d\n", sai_clk_rate, div);
- mask = SAI_XCR1_MCKDIV_MASK;
- cr1 = SAI_XCR1_MCKDIV_SET(div);
+ mask = SAI_XCR1_MCKDIV_MASK(SAI_XCR1_MCKDIV_WIDTH(version));
+ cr1 = SAI_XCR1_MCKDIV_SET(div);
ret = regmap_update_bits(sai->regmap, STM_SAI_CR1_REGX, mask, cr1);
if (ret < 0) {
dev_err(cpu_dai->dev, "Failed to update CR1 register\n");
@@ -780,8 +832,18 @@ static int stm32_sai_sub_parse_of(struct platform_device *pdev,
return PTR_ERR(base);
sai->phys_addr = res->start;
- sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "sai_ck", base,
- &stm32_sai_sub_regmap_config);
+
+ sai->regmap_config = &stm32_sai_sub_regmap_config_f4;
+ /* Note: PDM registers not available for H7 sub-block B */
+ if (STM_SAI_IS_H7(sai->pdata) && STM_SAI_IS_SUB_A(sai))
+ sai->regmap_config = &stm32_sai_sub_regmap_config_h7;
+
+ sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "sai_ck",
+ base, sai->regmap_config);
+ if (IS_ERR(sai->regmap)) {
+ dev_err(&pdev->dev, "Failed to initialize MMIO\n");
+ return PTR_ERR(sai->regmap);
+ }
/* Get direction property */
if (of_property_match_string(np, "dma-names", "tx") >= 0) {
--
2.11.0
The patch
dt-bindings: stm32: add h7 support for sai
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From aef86ae38b0579dc147e3b96b1b9523561f79378 Mon Sep 17 00:00:00 2001
From: olivier moysan <[email protected]>
Date: Fri, 16 Jun 2017 14:16:23 +0200
Subject: [PATCH] dt-bindings: stm32: add h7 support for sai
Document device tree bindings for STM32H7 SAI.
Signed-off-by: olivier moysan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
.../devicetree/bindings/sound/st,stm32-sai.txt | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index a0feeed1710e..f1c5ae59e7c9 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -6,7 +6,7 @@ The SAI contains two independent audio sub-blocks. Each sub-block has
its own clock generator and I/O lines controller.
Required properties:
- - compatible: Should be "st,stm32f4-sai"
+ - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
- reg: Base address and size of SAI common register set.
- clocks: Must contain phandle and clock specifier pairs for each entry
in clock-names.
@@ -47,24 +47,24 @@ sound_card {
};
sai1: sai1@40015800 {
- compatible = "st,stm32f4-sai";
+ compatible = "st,stm32h7-sai";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40015800 0x400>;
reg = <0x40015800 0x4>;
- clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
+ clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
clock-names = "x8k", "x11k";
interrupts = <87>;
- sai1b: audio-controller@40015824 {
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x1C>;
- clocks = <&rcc 1 CLK_SAI2>;
+ sai1a: audio-controller@40015804 {
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x1C>;
+ clocks = <&rcc SAI1_CK>;
clock-names = "sai_ck";
- dmas = <&dma2 5 0 0x400 0x0>;
+ dmas = <&dmamux1 1 87 0x400 0x0>;
dma-names = "tx";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai1b>;
+ pinctrl-0 = <&pinctrl_sai1a>;
sai1b_port: port {
cpu_endpoint: endpoint {
--
2.11.0