Changes in v3:
* SoB chain corrected
* minor corrections based on v2 feedback
* rebase on linux-next/master as of today
Changes in v2:
* dropped already merged patches
* rebase on top of linux-next/master
* Now by default refcount_t = atomic_t (*) and uses all atomic
standard operations unless CONFIG_REFCOUNT_FULL is enabled.
This is a compromise for the systems that are critical on
performance (such as net) and cannot accept even slight delay
on the refcounter operations.
This series, for core kernel components, replaces atomic_t reference
counters with the new refcount_t type and API (see include/linux/refcount.h).
By doing this we prevent intentional or accidental
underflows or overflows that can led to use-after-free vulnerabilities.
The patches are fully independent and can be cherry-picked separately.
If there are no objections to the patches, please merge them via respective trees.
If you want to test with refcount_t protection enabled, CONFIG_REFCOUNT_FULL
must be enabled.
* The respective change is currently merged into -next as
"locking/refcount: Create unchecked atomic_t implementation".
Elena Reshetova (15):
kernel: convert sighand_struct.count from atomic_t to refcount_t
kernel: convert signal_struct.sigcnt from atomic_t to refcount_t
kernel: convert user_struct.__count from atomic_t to refcount_t
kernel: convert task_struct.usage from atomic_t to refcount_t
kernel: convert task_struct.stack_refcount from atomic_t to refcount_t
kernel: convert perf_event_context.refcount from atomic_t to
refcount_t
kernel: convert ring_buffer.refcount from atomic_t to refcount_t
kernel: convert ring_buffer.aux_refcount from atomic_t to refcount_t
kernel: convert uprobe.ref from atomic_t to refcount_t
kernel: convert nsproxy.count from atomic_t to refcount_t
kernel: convert group_info.usage from atomic_t to refcount_t
kernel: convert cred.usage from atomic_t to refcount_t
sched: convert numa_group.refcount from atomic_t to refcount_t
kernel: convert futex_pi_state.refcount from atomic_t to refcount_t
kernel: convert kcov.refcount from atomic_t to refcount_t
fs/exec.c | 4 ++--
fs/proc/task_nommu.c | 2 +-
include/linux/cred.h | 13 ++++++------
include/linux/init_task.h | 7 +++---
include/linux/nsproxy.h | 6 +++---
include/linux/perf_event.h | 3 ++-
include/linux/sched.h | 5 +++--
include/linux/sched/signal.h | 5 +++--
include/linux/sched/task.h | 4 ++--
include/linux/sched/task_stack.h | 2 +-
include/linux/sched/user.h | 5 +++--
kernel/cred.c | 46 ++++++++++++++++++++--------------------
kernel/events/core.c | 18 ++++++++--------
kernel/events/internal.h | 5 +++--
kernel/events/ring_buffer.c | 8 +++----
kernel/events/uprobes.c | 8 +++----
kernel/fork.c | 24 ++++++++++-----------
kernel/futex.c | 13 ++++++------
kernel/groups.c | 2 +-
kernel/kcov.c | 9 ++++----
kernel/nsproxy.c | 6 +++---
kernel/sched/fair.c | 8 +++----
kernel/user.c | 8 +++----
23 files changed, 110 insertions(+), 101 deletions(-)
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
fs/exec.c | 4 ++--
fs/proc/task_nommu.c | 2 +-
include/linux/init_task.h | 2 +-
include/linux/sched/signal.h | 3 ++-
kernel/fork.c | 8 ++++----
5 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/fs/exec.c b/fs/exec.c
index 62175cb..75e2800 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1200,7 +1200,7 @@ static int de_thread(struct task_struct *tsk)
flush_itimer_signals();
#endif
- if (atomic_read(&oldsighand->count) != 1) {
+ if (refcount_read(&oldsighand->count) != 1) {
struct sighand_struct *newsighand;
/*
* This ->sighand is shared with the CLONE_SIGHAND
@@ -1210,7 +1210,7 @@ static int de_thread(struct task_struct *tsk)
if (!newsighand)
return -ENOMEM;
- atomic_set(&newsighand->count, 1);
+ refcount_set(&newsighand->count, 1);
memcpy(newsighand->action, oldsighand->action,
sizeof(newsighand->action));
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 38ca416..eea6b91 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -63,7 +63,7 @@ void task_mem(struct seq_file *m, struct mm_struct *mm)
else
bytes += kobjsize(current->files);
- if (current->sighand && atomic_read(¤t->sighand->count) > 1)
+ if (current->sighand && refcount_read(¤t->sighand->count) > 1)
sbytes += kobjsize(current->sighand);
else
bytes += kobjsize(current->sighand);
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index a2f6707..61777d6 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -85,7 +85,7 @@ extern struct fs_struct init_fs;
extern struct nsproxy init_nsproxy;
#define INIT_SIGHAND(sighand) { \
- .count = ATOMIC_INIT(1), \
+ .count = REFCOUNT_INIT(1), \
.action = { { { .sa_handler = SIG_DFL, } }, }, \
.siglock = __SPIN_LOCK_UNLOCKED(sighand.siglock), \
.signalfd_wqh = __WAIT_QUEUE_HEAD_INITIALIZER(sighand.signalfd_wqh), \
diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h
index 2a0dd40..4d5cdf1 100644
--- a/include/linux/sched/signal.h
+++ b/include/linux/sched/signal.h
@@ -7,13 +7,14 @@
#include <linux/sched/jobctl.h>
#include <linux/sched/task.h>
#include <linux/cred.h>
+#include <linux/refcount.h>
/*
* Types defining task->signal and task->sighand and APIs using them:
*/
struct sighand_struct {
- atomic_t count;
+ refcount_t count;
struct k_sigaction action[_NSIG];
spinlock_t siglock;
wait_queue_head_t signalfd_wqh;
diff --git a/kernel/fork.c b/kernel/fork.c
index 080688f..60bd7bf 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1317,7 +1317,7 @@ static int copy_sighand(unsigned long clone_flags, struct task_struct *tsk)
struct sighand_struct *sig;
if (clone_flags & CLONE_SIGHAND) {
- atomic_inc(¤t->sighand->count);
+ refcount_inc(¤t->sighand->count);
return 0;
}
sig = kmem_cache_alloc(sighand_cachep, GFP_KERNEL);
@@ -1325,14 +1325,14 @@ static int copy_sighand(unsigned long clone_flags, struct task_struct *tsk)
if (!sig)
return -ENOMEM;
- atomic_set(&sig->count, 1);
+ refcount_set(&sig->count, 1);
memcpy(sig->action, current->sighand->action, sizeof(sig->action));
return 0;
}
void __cleanup_sighand(struct sighand_struct *sighand)
{
- if (atomic_dec_and_test(&sighand->count)) {
+ if (refcount_dec_and_test(&sighand->count)) {
signalfd_cleanup(sighand);
/*
* sighand_cachep is SLAB_TYPESAFE_BY_RCU so we can free it
@@ -2236,7 +2236,7 @@ static int check_unshare_flags(unsigned long unshare_flags)
return -EINVAL;
}
if (unshare_flags & (CLONE_SIGHAND | CLONE_VM)) {
- if (atomic_read(¤t->sighand->count) > 1)
+ if (refcount_read(¤t->sighand->count) > 1)
return -EINVAL;
}
if (unshare_flags & CLONE_VM) {
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
include/linux/sched/signal.h | 2 +-
kernel/fork.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h
index 4d5cdf1..c5f1a67 100644
--- a/include/linux/sched/signal.h
+++ b/include/linux/sched/signal.h
@@ -77,7 +77,7 @@ struct thread_group_cputimer {
* the locking of signal_struct.
*/
struct signal_struct {
- atomic_t sigcnt;
+ refcount_t sigcnt;
atomic_t live;
int nr_threads;
struct list_head thread_head;
diff --git a/kernel/fork.c b/kernel/fork.c
index 60bd7bf..337904a 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -399,7 +399,7 @@ static inline void free_signal_struct(struct signal_struct *sig)
static inline void put_signal_struct(struct signal_struct *sig)
{
- if (atomic_dec_and_test(&sig->sigcnt))
+ if (refcount_dec_and_test(&sig->sigcnt))
free_signal_struct(sig);
}
@@ -1379,7 +1379,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
sig->nr_threads = 1;
atomic_set(&sig->live, 1);
- atomic_set(&sig->sigcnt, 1);
+ refcount_set(&sig->sigcnt, 1);
/* list_add(thread_node, thread_head) without INIT_LIST_HEAD() */
sig->thread_head = (struct list_head)LIST_HEAD_INIT(tsk->thread_node);
@@ -1888,7 +1888,7 @@ static __latent_entropy struct task_struct *copy_process(
} else {
current->signal->nr_threads++;
atomic_inc(¤t->signal->live);
- atomic_inc(¤t->signal->sigcnt);
+ refcount_inc(¤t->signal->sigcnt);
list_add_tail_rcu(&p->thread_group,
&p->group_leader->thread_group);
list_add_tail_rcu(&p->thread_node,
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
include/linux/sched/user.h | 5 +++--
kernel/user.c | 8 ++++----
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/include/linux/sched/user.h b/include/linux/sched/user.h
index 5d5415e..0a9953d 100644
--- a/include/linux/sched/user.h
+++ b/include/linux/sched/user.h
@@ -3,6 +3,7 @@
#include <linux/uidgid.h>
#include <linux/atomic.h>
+#include <linux/refcount.h>
struct key;
@@ -10,7 +11,7 @@ struct key;
* Some day this will be a full-fledged user tracking system..
*/
struct user_struct {
- atomic_t __count; /* reference count */
+ refcount_t __count; /* reference count */
atomic_t processes; /* How many processes does this user have? */
atomic_t sigpending; /* How many pending signals does this user have? */
#ifdef CONFIG_FANOTIFY
@@ -53,7 +54,7 @@ extern struct user_struct root_user;
extern struct user_struct * alloc_uid(kuid_t);
static inline struct user_struct *get_uid(struct user_struct *u)
{
- atomic_inc(&u->__count);
+ refcount_inc(&u->__count);
return u;
}
extern void free_uid(struct user_struct *);
diff --git a/kernel/user.c b/kernel/user.c
index 00281ad..c072348 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -90,7 +90,7 @@ static DEFINE_SPINLOCK(uidhash_lock);
/* root_user.__count is 1, for init task cred */
struct user_struct root_user = {
- .__count = ATOMIC_INIT(1),
+ .__count = REFCOUNT_INIT(1),
.processes = ATOMIC_INIT(1),
.sigpending = ATOMIC_INIT(0),
.locked_shm = 0,
@@ -116,7 +116,7 @@ static struct user_struct *uid_hash_find(kuid_t uid, struct hlist_head *hashent)
hlist_for_each_entry(user, hashent, uidhash_node) {
if (uid_eq(user->uid, uid)) {
- atomic_inc(&user->__count);
+ refcount_inc(&user->__count);
return user;
}
}
@@ -163,7 +163,7 @@ void free_uid(struct user_struct *up)
return;
local_irq_save(flags);
- if (atomic_dec_and_lock(&up->__count, &uidhash_lock))
+ if (refcount_dec_and_lock(&up->__count, &uidhash_lock))
free_user(up, flags);
else
local_irq_restore(flags);
@@ -184,7 +184,7 @@ struct user_struct *alloc_uid(kuid_t uid)
goto out_unlock;
new->uid = uid;
- atomic_set(&new->__count, 1);
+ refcount_set(&new->__count, 1);
/*
* Before adding this, check whether we raced
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
include/linux/init_task.h | 2 +-
include/linux/sched.h | 3 ++-
include/linux/sched/task.h | 4 ++--
kernel/fork.c | 4 ++--
4 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 61777d6..7ba3fca 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -234,7 +234,7 @@ extern struct cred init_cred;
INIT_TASK_TI(tsk) \
.state = 0, \
.stack = init_stack, \
- .usage = ATOMIC_INIT(2), \
+ .usage = REFCOUNT_INIT(2), \
.flags = PF_KTHREAD, \
.prio = MAX_PRIO-20, \
.static_prio = MAX_PRIO-20, \
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8337e2d..9380e44 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -20,6 +20,7 @@
#include <linux/seccomp.h>
#include <linux/nodemask.h>
#include <linux/rcupdate.h>
+#include <linux/refcount.h>
#include <linux/resource.h>
#include <linux/latencytop.h>
#include <linux/sched/prio.h>
@@ -534,7 +535,7 @@ struct task_struct {
randomized_struct_fields_start
void *stack;
- atomic_t usage;
+ refcount_t usage;
/* Per task flags (PF_*), defined further below: */
unsigned int flags;
unsigned int ptrace;
diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h
index c97e5f0..afd5e58 100644
--- a/include/linux/sched/task.h
+++ b/include/linux/sched/task.h
@@ -86,13 +86,13 @@ extern void sched_exec(void);
#define sched_exec() {}
#endif
-#define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
+#define get_task_struct(tsk) do { refcount_inc(&(tsk)->usage); } while(0)
extern void __put_task_struct(struct task_struct *t);
static inline void put_task_struct(struct task_struct *t)
{
- if (atomic_dec_and_test(&t->usage))
+ if (refcount_dec_and_test(&t->usage))
__put_task_struct(t);
}
diff --git a/kernel/fork.c b/kernel/fork.c
index 337904a..cfd8a42 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -406,7 +406,7 @@ static inline void put_signal_struct(struct signal_struct *sig)
void __put_task_struct(struct task_struct *tsk)
{
WARN_ON(!tsk->exit_state);
- WARN_ON(atomic_read(&tsk->usage));
+ WARN_ON(refcount_read(&tsk->usage));
WARN_ON(tsk == current);
cgroup_free(tsk);
@@ -561,7 +561,7 @@ static struct task_struct *dup_task_struct(struct task_struct *orig, int node)
* One for us, one for whoever does the "release_task()" (usually
* parent)
*/
- atomic_set(&tsk->usage, 2);
+ refcount_set(&tsk->usage, 2);
#ifdef CONFIG_BLK_DEV_IO_TRACE
tsk->btrace_seq = 0;
#endif
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
include/linux/perf_event.h | 3 ++-
kernel/events/core.c | 12 ++++++------
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index a3b873f..f7a9802 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -54,6 +54,7 @@ struct perf_guest_info_callbacks {
#include <linux/perf_regs.h>
#include <linux/workqueue.h>
#include <linux/cgroup.h>
+#include <linux/refcount.h>
#include <asm/local.h>
struct perf_callchain_entry {
@@ -750,7 +751,7 @@ struct perf_event_context {
int nr_stat;
int nr_freq;
int rotate_disable;
- atomic_t refcount;
+ refcount_t refcount;
struct task_struct *task;
/*
diff --git a/kernel/events/core.c b/kernel/events/core.c
index dbb4f68..faf9925 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1109,7 +1109,7 @@ static void perf_event_ctx_deactivate(struct perf_event_context *ctx)
static void get_ctx(struct perf_event_context *ctx)
{
- WARN_ON(!atomic_inc_not_zero(&ctx->refcount));
+ refcount_inc(&ctx->refcount);
}
static void free_ctx(struct rcu_head *head)
@@ -1123,7 +1123,7 @@ static void free_ctx(struct rcu_head *head)
static void put_ctx(struct perf_event_context *ctx)
{
- if (atomic_dec_and_test(&ctx->refcount)) {
+ if (refcount_dec_and_test(&ctx->refcount)) {
if (ctx->parent_ctx)
put_ctx(ctx->parent_ctx);
if (ctx->task && ctx->task != TASK_TOMBSTONE)
@@ -1201,7 +1201,7 @@ perf_event_ctx_lock_nested(struct perf_event *event, int nesting)
again:
rcu_read_lock();
ctx = ACCESS_ONCE(event->ctx);
- if (!atomic_inc_not_zero(&ctx->refcount)) {
+ if (!refcount_inc_not_zero(&ctx->refcount)) {
rcu_read_unlock();
goto again;
}
@@ -1329,7 +1329,7 @@ perf_lock_task_context(struct task_struct *task, int ctxn, unsigned long *flags)
}
if (ctx->task == TASK_TOMBSTONE ||
- !atomic_inc_not_zero(&ctx->refcount)) {
+ !refcount_inc_not_zero(&ctx->refcount)) {
raw_spin_unlock(&ctx->lock);
ctx = NULL;
} else {
@@ -3760,7 +3760,7 @@ static void __perf_event_init_context(struct perf_event_context *ctx)
INIT_LIST_HEAD(&ctx->pinned_groups);
INIT_LIST_HEAD(&ctx->flexible_groups);
INIT_LIST_HEAD(&ctx->event_list);
- atomic_set(&ctx->refcount, 1);
+ refcount_set(&ctx->refcount, 1);
}
static struct perf_event_context *
@@ -9770,7 +9770,7 @@ __perf_event_ctx_lock_double(struct perf_event *group_leader,
again:
rcu_read_lock();
gctx = READ_ONCE(group_leader->ctx);
- if (!atomic_inc_not_zero(&gctx->refcount)) {
+ if (!refcount_inc_not_zero(&gctx->refcount)) {
rcu_read_unlock();
goto again;
}
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
kernel/events/core.c | 4 ++--
kernel/events/internal.h | 3 ++-
kernel/events/ring_buffer.c | 2 +-
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index faf9925..9147397 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5049,7 +5049,7 @@ struct ring_buffer *ring_buffer_get(struct perf_event *event)
rcu_read_lock();
rb = rcu_dereference(event->rb);
if (rb) {
- if (!atomic_inc_not_zero(&rb->refcount))
+ if (!refcount_inc_not_zero(&rb->refcount))
rb = NULL;
}
rcu_read_unlock();
@@ -5059,7 +5059,7 @@ struct ring_buffer *ring_buffer_get(struct perf_event *event)
void ring_buffer_put(struct ring_buffer *rb)
{
- if (!atomic_dec_and_test(&rb->refcount))
+ if (!refcount_dec_and_test(&rb->refcount))
return;
WARN_ON_ONCE(!list_empty(&rb->event_list));
diff --git a/kernel/events/internal.h b/kernel/events/internal.h
index 486fd78..b8e6fdf 100644
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -3,13 +3,14 @@
#include <linux/hardirq.h>
#include <linux/uaccess.h>
+#include <linux/refcount.h>
/* Buffer handling */
#define RING_BUFFER_WRITABLE 0x01
struct ring_buffer {
- atomic_t refcount;
+ refcount_t refcount;
struct rcu_head rcu_head;
#ifdef CONFIG_PERF_USE_VMALLOC
struct work_struct work;
diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index ee97196..3353572 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -284,7 +284,7 @@ ring_buffer_init(struct ring_buffer *rb, long watermark, int flags)
else
rb->overwrite = 1;
- atomic_set(&rb->refcount, 1);
+ refcount_set(&rb->refcount, 1);
INIT_LIST_HEAD(&rb->event_list);
spin_lock_init(&rb->event_lock);
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
kernel/events/uprobes.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 456596d..ca093957 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -66,7 +66,7 @@ static struct percpu_rw_semaphore dup_mmap_sem;
struct uprobe {
struct rb_node rb_node; /* node in the rb tree */
- atomic_t ref;
+ refcount_t ref;
struct rw_semaphore register_rwsem;
struct rw_semaphore consumer_rwsem;
struct list_head pending_list;
@@ -371,13 +371,13 @@ set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long v
static struct uprobe *get_uprobe(struct uprobe *uprobe)
{
- atomic_inc(&uprobe->ref);
+ refcount_inc(&uprobe->ref);
return uprobe;
}
static void put_uprobe(struct uprobe *uprobe)
{
- if (atomic_dec_and_test(&uprobe->ref))
+ if (refcount_dec_and_test(&uprobe->ref))
kfree(uprobe);
}
@@ -459,7 +459,7 @@ static struct uprobe *__insert_uprobe(struct uprobe *uprobe)
rb_link_node(&uprobe->rb_node, parent, p);
rb_insert_color(&uprobe->rb_node, &uprobes_tree);
/* get access + creation ref */
- atomic_set(&uprobe->ref, 2);
+ refcount_set(&uprobe->ref, 2);
return u;
}
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
include/linux/nsproxy.h | 6 +++---
kernel/nsproxy.c | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h
index ac0d65b..f862ba8 100644
--- a/include/linux/nsproxy.h
+++ b/include/linux/nsproxy.h
@@ -28,7 +28,7 @@ struct fs_struct;
* nsproxy is copied.
*/
struct nsproxy {
- atomic_t count;
+ refcount_t count;
struct uts_namespace *uts_ns;
struct ipc_namespace *ipc_ns;
struct mnt_namespace *mnt_ns;
@@ -74,14 +74,14 @@ int __init nsproxy_cache_init(void);
static inline void put_nsproxy(struct nsproxy *ns)
{
- if (atomic_dec_and_test(&ns->count)) {
+ if (refcount_dec_and_test(&ns->count)) {
free_nsproxy(ns);
}
}
static inline void get_nsproxy(struct nsproxy *ns)
{
- atomic_inc(&ns->count);
+ refcount_inc(&ns->count);
}
#endif
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index f6c5d33..5bfe691 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -31,7 +31,7 @@
static struct kmem_cache *nsproxy_cachep;
struct nsproxy init_nsproxy = {
- .count = ATOMIC_INIT(1),
+ .count = REFCOUNT_INIT(1),
.uts_ns = &init_uts_ns,
#if defined(CONFIG_POSIX_MQUEUE) || defined(CONFIG_SYSVIPC)
.ipc_ns = &init_ipc_ns,
@@ -52,7 +52,7 @@ static inline struct nsproxy *create_nsproxy(void)
nsproxy = kmem_cache_alloc(nsproxy_cachep, GFP_KERNEL);
if (nsproxy)
- atomic_set(&nsproxy->count, 1);
+ refcount_set(&nsproxy->count, 1);
return nsproxy;
}
@@ -225,7 +225,7 @@ void switch_task_namespaces(struct task_struct *p, struct nsproxy *new)
p->nsproxy = new;
task_unlock(p);
- if (ns && atomic_dec_and_test(&ns->count))
+ if (ns && refcount_dec_and_test(&ns->count))
free_nsproxy(ns);
}
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
include/linux/cred.h | 7 ++++---
kernel/cred.c | 2 +-
kernel/groups.c | 2 +-
3 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 099058e..00948dd 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -17,6 +17,7 @@
#include <linux/key.h>
#include <linux/selinux.h>
#include <linux/atomic.h>
+#include <linux/refcount.h>
#include <linux/uidgid.h>
#include <linux/sched.h>
#include <linux/sched/user.h>
@@ -28,7 +29,7 @@ struct inode;
* COW Supplementary groups list
*/
struct group_info {
- atomic_t usage;
+ refcount_t usage;
int ngroups;
kgid_t gid[0];
} __randomize_layout;
@@ -44,7 +45,7 @@ struct group_info {
*/
static inline struct group_info *get_group_info(struct group_info *gi)
{
- atomic_inc(&gi->usage);
+ refcount_inc(&gi->usage);
return gi;
}
@@ -54,7 +55,7 @@ static inline struct group_info *get_group_info(struct group_info *gi)
*/
#define put_group_info(group_info) \
do { \
- if (atomic_dec_and_test(&(group_info)->usage)) \
+ if (refcount_dec_and_test(&(group_info)->usage)) \
groups_free(group_info); \
} while (0)
diff --git a/kernel/cred.c b/kernel/cred.c
index ecf0365..8122d7c 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -36,7 +36,7 @@ do { \
static struct kmem_cache *cred_jar;
/* init to 2 - one for init_task, one to ensure it is never freed */
-struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
+struct group_info init_groups = { .usage = REFCOUNT_INIT(2) };
/*
* The initial credentials for the initial task
diff --git a/kernel/groups.c b/kernel/groups.c
index 434f666..5fc6e21 100644
--- a/kernel/groups.c
+++ b/kernel/groups.c
@@ -23,7 +23,7 @@ struct group_info *groups_alloc(int gidsetsize)
if (!gi)
return NULL;
- atomic_set(&gi->usage, 1);
+ refcount_set(&gi->usage, 1);
gi->ngroups = gidsetsize;
return gi;
}
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
include/linux/cred.h | 6 +++---
kernel/cred.c | 44 ++++++++++++++++++++++----------------------
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 00948dd..a9f217b 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -109,7 +109,7 @@ extern bool may_setgroups(void);
* same context as task->real_cred.
*/
struct cred {
- atomic_t usage;
+ refcount_t usage;
#ifdef CONFIG_DEBUG_CREDENTIALS
atomic_t subscribers; /* number of processes subscribed */
void *put_addr;
@@ -222,7 +222,7 @@ static inline bool cap_ambient_invariant_ok(const struct cred *cred)
*/
static inline struct cred *get_new_cred(struct cred *cred)
{
- atomic_inc(&cred->usage);
+ refcount_inc(&cred->usage);
return cred;
}
@@ -262,7 +262,7 @@ static inline void put_cred(const struct cred *_cred)
struct cred *cred = (struct cred *) _cred;
validate_creds(cred);
- if (atomic_dec_and_test(&(cred)->usage))
+ if (refcount_dec_and_test(&(cred)->usage))
__put_cred(cred);
}
diff --git a/kernel/cred.c b/kernel/cred.c
index 8122d7c..49664e5 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -42,7 +42,7 @@ struct group_info init_groups = { .usage = REFCOUNT_INIT(2) };
* The initial credentials for the initial task
*/
struct cred init_cred = {
- .usage = ATOMIC_INIT(4),
+ .usage = REFCOUNT_INIT(4),
#ifdef CONFIG_DEBUG_CREDENTIALS
.subscribers = ATOMIC_INIT(2),
.magic = CRED_MAGIC,
@@ -101,17 +101,17 @@ static void put_cred_rcu(struct rcu_head *rcu)
#ifdef CONFIG_DEBUG_CREDENTIALS
if (cred->magic != CRED_MAGIC_DEAD ||
- atomic_read(&cred->usage) != 0 ||
+ refcount_read(&cred->usage) != 0 ||
read_cred_subscribers(cred) != 0)
panic("CRED: put_cred_rcu() sees %p with"
" mag %x, put %p, usage %d, subscr %d\n",
cred, cred->magic, cred->put_addr,
- atomic_read(&cred->usage),
+ refcount_read(&cred->usage),
read_cred_subscribers(cred));
#else
- if (atomic_read(&cred->usage) != 0)
+ if (refcount_read(&cred->usage) != 0)
panic("CRED: put_cred_rcu() sees %p with usage %d\n",
- cred, atomic_read(&cred->usage));
+ cred, refcount_read(&cred->usage));
#endif
security_cred_free(cred);
@@ -135,10 +135,10 @@ static void put_cred_rcu(struct rcu_head *rcu)
void __put_cred(struct cred *cred)
{
kdebug("__put_cred(%p{%d,%d})", cred,
- atomic_read(&cred->usage),
+ refcount_read(&cred->usage),
read_cred_subscribers(cred));
- BUG_ON(atomic_read(&cred->usage) != 0);
+ BUG_ON(refcount_read(&cred->usage) != 0);
#ifdef CONFIG_DEBUG_CREDENTIALS
BUG_ON(read_cred_subscribers(cred) != 0);
cred->magic = CRED_MAGIC_DEAD;
@@ -159,7 +159,7 @@ void exit_creds(struct task_struct *tsk)
struct cred *cred;
kdebug("exit_creds(%u,%p,%p,{%d,%d})", tsk->pid, tsk->real_cred, tsk->cred,
- atomic_read(&tsk->cred->usage),
+ refcount_read(&tsk->cred->usage),
read_cred_subscribers(tsk->cred));
cred = (struct cred *) tsk->real_cred;
@@ -194,7 +194,7 @@ const struct cred *get_task_cred(struct task_struct *task)
do {
cred = __task_cred((task));
BUG_ON(!cred);
- } while (!atomic_inc_not_zero(&((struct cred *)cred)->usage));
+ } while (!refcount_inc_not_zero(&((struct cred *)cred)->usage));
rcu_read_unlock();
return cred;
@@ -212,7 +212,7 @@ struct cred *cred_alloc_blank(void)
if (!new)
return NULL;
- atomic_set(&new->usage, 1);
+ refcount_set(&new->usage, 1);
#ifdef CONFIG_DEBUG_CREDENTIALS
new->magic = CRED_MAGIC;
#endif
@@ -258,7 +258,7 @@ struct cred *prepare_creds(void)
old = task->cred;
memcpy(new, old, sizeof(struct cred));
- atomic_set(&new->usage, 1);
+ refcount_set(&new->usage, 1);
set_cred_subscribers(new, 0);
get_group_info(new->group_info);
get_uid(new->user);
@@ -335,7 +335,7 @@ int copy_creds(struct task_struct *p, unsigned long clone_flags)
get_cred(p->cred);
alter_cred_subscribers(p->cred, 2);
kdebug("share_creds(%p{%d,%d})",
- p->cred, atomic_read(&p->cred->usage),
+ p->cred, refcount_read(&p->cred->usage),
read_cred_subscribers(p->cred));
atomic_inc(&p->cred->user->processes);
return 0;
@@ -426,7 +426,7 @@ int commit_creds(struct cred *new)
const struct cred *old = task->real_cred;
kdebug("commit_creds(%p{%d,%d})", new,
- atomic_read(&new->usage),
+ refcount_read(&new->usage),
read_cred_subscribers(new));
BUG_ON(task->cred != old);
@@ -435,7 +435,7 @@ int commit_creds(struct cred *new)
validate_creds(old);
validate_creds(new);
#endif
- BUG_ON(atomic_read(&new->usage) < 1);
+ BUG_ON(refcount_read(&new->usage) < 1);
get_cred(new); /* we will require a ref for the subj creds too */
@@ -500,13 +500,13 @@ EXPORT_SYMBOL(commit_creds);
void abort_creds(struct cred *new)
{
kdebug("abort_creds(%p{%d,%d})", new,
- atomic_read(&new->usage),
+ refcount_read(&new->usage),
read_cred_subscribers(new));
#ifdef CONFIG_DEBUG_CREDENTIALS
BUG_ON(read_cred_subscribers(new) != 0);
#endif
- BUG_ON(atomic_read(&new->usage) < 1);
+ BUG_ON(refcount_read(&new->usage) < 1);
put_cred(new);
}
EXPORT_SYMBOL(abort_creds);
@@ -523,7 +523,7 @@ const struct cred *override_creds(const struct cred *new)
const struct cred *old = current->cred;
kdebug("override_creds(%p{%d,%d})", new,
- atomic_read(&new->usage),
+ refcount_read(&new->usage),
read_cred_subscribers(new));
validate_creds(old);
@@ -534,7 +534,7 @@ const struct cred *override_creds(const struct cred *new)
alter_cred_subscribers(old, -1);
kdebug("override_creds() = %p{%d,%d}", old,
- atomic_read(&old->usage),
+ refcount_read(&old->usage),
read_cred_subscribers(old));
return old;
}
@@ -552,7 +552,7 @@ void revert_creds(const struct cred *old)
const struct cred *override = current->cred;
kdebug("revert_creds(%p{%d,%d})", old,
- atomic_read(&old->usage),
+ refcount_read(&old->usage),
read_cred_subscribers(old));
validate_creds(old);
@@ -611,7 +611,7 @@ struct cred *prepare_kernel_cred(struct task_struct *daemon)
validate_creds(old);
*new = *old;
- atomic_set(&new->usage, 1);
+ refcount_set(&new->usage, 1);
set_cred_subscribers(new, 0);
get_uid(new->user);
get_user_ns(new->user_ns);
@@ -735,7 +735,7 @@ static void dump_invalid_creds(const struct cred *cred, const char *label,
printk(KERN_ERR "CRED: ->magic=%x, put_addr=%p\n",
cred->magic, cred->put_addr);
printk(KERN_ERR "CRED: ->usage=%d, subscr=%d\n",
- atomic_read(&cred->usage),
+ refcount_read(&cred->usage),
read_cred_subscribers(cred));
printk(KERN_ERR "CRED: ->*uid = { %d,%d,%d,%d }\n",
from_kuid_munged(&init_user_ns, cred->uid),
@@ -809,7 +809,7 @@ void validate_creds_for_do_exit(struct task_struct *tsk)
{
kdebug("validate_creds_for_do_exit(%p,%p{%d,%d})",
tsk->real_cred, tsk->cred,
- atomic_read(&tsk->cred->usage),
+ refcount_read(&tsk->cred->usage),
read_cred_subscribers(tsk->cred));
__validate_process_creds(tsk, __FILE__, __LINE__);
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
kernel/kcov.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/kernel/kcov.c b/kernel/kcov.c
index cd77199..a6c7df3 100644
--- a/kernel/kcov.c
+++ b/kernel/kcov.c
@@ -19,6 +19,7 @@
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/kcov.h>
+#include <linux/refcount.h>
#include <asm/setup.h>
/*
@@ -35,7 +36,7 @@ struct kcov {
* - opened file descriptor
* - task with enabled coverage (we can't unwire it from another task)
*/
- atomic_t refcount;
+ refcount_t refcount;
/* The lock protects mode, size, area and t. */
spinlock_t lock;
enum kcov_mode mode;
@@ -94,12 +95,12 @@ EXPORT_SYMBOL(__sanitizer_cov_trace_pc);
static void kcov_get(struct kcov *kcov)
{
- atomic_inc(&kcov->refcount);
+ refcount_inc(&kcov->refcount);
}
static void kcov_put(struct kcov *kcov)
{
- if (atomic_dec_and_test(&kcov->refcount)) {
+ if (refcount_dec_and_test(&kcov->refcount)) {
vfree(kcov->area);
kfree(kcov);
}
@@ -175,7 +176,7 @@ static int kcov_open(struct inode *inode, struct file *filep)
kcov = kzalloc(sizeof(*kcov), GFP_KERNEL);
if (!kcov)
return -ENOMEM;
- atomic_set(&kcov->refcount, 1);
+ refcount_set(&kcov->refcount, 1);
spin_lock_init(&kcov->lock);
filep->private_data = kcov;
return nonseekable_open(inode, filep);
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
kernel/sched/fair.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index c95880e..5f7f997 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -1130,7 +1130,7 @@ static void account_numa_dequeue(struct rq *rq, struct task_struct *p)
}
struct numa_group {
- atomic_t refcount;
+ refcount_t refcount;
spinlock_t lock; /* nr_tasks, tasks */
int nr_tasks;
@@ -2177,12 +2177,12 @@ static void task_numa_placement(struct task_struct *p)
static inline int get_numa_group(struct numa_group *grp)
{
- return atomic_inc_not_zero(&grp->refcount);
+ return refcount_inc_not_zero(&grp->refcount);
}
static inline void put_numa_group(struct numa_group *grp)
{
- if (atomic_dec_and_test(&grp->refcount))
+ if (refcount_dec_and_test(&grp->refcount))
kfree_rcu(grp, rcu);
}
@@ -2203,7 +2203,7 @@ static void task_numa_group(struct task_struct *p, int cpupid, int flags,
if (!grp)
return;
- atomic_set(&grp->refcount, 1);
+ refcount_set(&grp->refcount, 1);
grp->active_nodes = 1;
grp->max_faults_cpu = 0;
spin_lock_init(&grp->lock);
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
kernel/futex.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/kernel/futex.c b/kernel/futex.c
index 16dbe4c..1cc7641 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -67,6 +67,7 @@
#include <linux/freezer.h>
#include <linux/bootmem.h>
#include <linux/fault-inject.h>
+#include <linux/refcount.h>
#include <asm/futex.h>
@@ -209,7 +210,7 @@ struct futex_pi_state {
struct rt_mutex pi_mutex;
struct task_struct *owner;
- atomic_t refcount;
+ refcount_t refcount;
union futex_key key;
} __randomize_layout;
@@ -794,7 +795,7 @@ static int refill_pi_state_cache(void)
INIT_LIST_HEAD(&pi_state->list);
/* pi_mutex gets initialized later */
pi_state->owner = NULL;
- atomic_set(&pi_state->refcount, 1);
+ refcount_set(&pi_state->refcount, 1);
pi_state->key = FUTEX_KEY_INIT;
current->pi_state_cache = pi_state;
@@ -814,7 +815,7 @@ static struct futex_pi_state *alloc_pi_state(void)
static void get_pi_state(struct futex_pi_state *pi_state)
{
- WARN_ON_ONCE(!atomic_inc_not_zero(&pi_state->refcount));
+ refcount_inc(&pi_state->refcount);
}
/*
@@ -828,7 +829,7 @@ static void put_pi_state(struct futex_pi_state *pi_state)
if (!pi_state)
return;
- if (!atomic_dec_and_test(&pi_state->refcount))
+ if (!refcount_dec_and_test(&pi_state->refcount))
return;
/*
@@ -852,7 +853,7 @@ static void put_pi_state(struct futex_pi_state *pi_state)
* refcount is at 0 - put it back to 1.
*/
pi_state->owner = NULL;
- atomic_set(&pi_state->refcount, 1);
+ refcount_set(&pi_state->refcount, 1);
current->pi_state_cache = pi_state;
}
}
@@ -1046,7 +1047,7 @@ static int attach_to_pi_state(u32 __user *uaddr, u32 uval,
* and futex_wait_requeue_pi() as it cannot go to 0 and consequently
* free pi_state before we can take a reference ourselves.
*/
- WARN_ON(!atomic_read(&pi_state->refcount));
+ WARN_ON(!refcount_read(&pi_state->refcount));
/*
* Now that we have a pi_state, we can acquire wait_lock
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
kernel/events/core.c | 2 +-
kernel/events/internal.h | 2 +-
kernel/events/ring_buffer.c | 6 +++---
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 9147397..072327e 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5124,7 +5124,7 @@ static void perf_mmap_close(struct vm_area_struct *vma)
/* this has to be the last one */
rb_free_aux(rb);
- WARN_ON_ONCE(atomic_read(&rb->aux_refcount));
+ WARN_ON_ONCE(refcount_read(&rb->aux_refcount));
mutex_unlock(&event->mmap_mutex);
}
diff --git a/kernel/events/internal.h b/kernel/events/internal.h
index b8e6fdf..fb55716 100644
--- a/kernel/events/internal.h
+++ b/kernel/events/internal.h
@@ -48,7 +48,7 @@ struct ring_buffer {
atomic_t aux_mmap_count;
unsigned long aux_mmap_locked;
void (*free_aux)(void *);
- atomic_t aux_refcount;
+ refcount_t aux_refcount;
void **aux_pages;
void *aux_priv;
diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 3353572..ba12fd2 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -357,7 +357,7 @@ void *perf_aux_output_begin(struct perf_output_handle *handle,
if (!atomic_read(&rb->aux_mmap_count))
goto err;
- if (!atomic_inc_not_zero(&rb->aux_refcount))
+ if (!refcount_inc_not_zero(&rb->aux_refcount))
goto err;
/*
@@ -648,7 +648,7 @@ int rb_alloc_aux(struct ring_buffer *rb, struct perf_event *event,
* we keep a refcount here to make sure either of the two can
* reference them safely.
*/
- atomic_set(&rb->aux_refcount, 1);
+ refcount_set(&rb->aux_refcount, 1);
rb->aux_overwrite = overwrite;
rb->aux_watermark = watermark;
@@ -667,7 +667,7 @@ int rb_alloc_aux(struct ring_buffer *rb, struct perf_event *event,
void rb_free_aux(struct ring_buffer *rb)
{
- if (atomic_dec_and_test(&rb->aux_refcount))
+ if (refcount_dec_and_test(&rb->aux_refcount))
__rb_free_aux(rb);
}
--
2.7.4
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Suggested-by: Kees Cook <[email protected]>
Reviewed-by: David Windsor <[email protected]>
Reviewed-by: Hans Liljestrand <[email protected]>
Signed-off-by: Elena Reshetova <[email protected]>
---
include/linux/init_task.h | 3 ++-
include/linux/sched.h | 2 +-
include/linux/sched/task_stack.h | 2 +-
kernel/fork.c | 6 +++---
4 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 7ba3fca..8be9369 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -12,6 +12,7 @@
#include <linux/securebits.h>
#include <linux/seqlock.h>
#include <linux/rbtree.h>
+#include <linux/refcount.h>
#include <linux/sched/autogroup.h>
#include <net/net_namespace.h>
#include <linux/sched/rt.h>
@@ -214,7 +215,7 @@ extern struct cred init_cred;
#ifdef CONFIG_THREAD_INFO_IN_TASK
# define INIT_TASK_TI(tsk) \
.thread_info = INIT_THREAD_INFO(tsk), \
- .stack_refcount = ATOMIC_INIT(1),
+ .stack_refcount = REFCOUNT_INIT(1),
#else
# define INIT_TASK_TI(tsk)
#endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 9380e44..bd49917 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1078,7 +1078,7 @@ struct task_struct {
#endif
#ifdef CONFIG_THREAD_INFO_IN_TASK
/* A live task holds one reference: */
- atomic_t stack_refcount;
+ refcount_t stack_refcount;
#endif
#ifdef CONFIG_LIVEPATCH
int patch_state;
diff --git a/include/linux/sched/task_stack.h b/include/linux/sched/task_stack.h
index df6ea66..aab3809 100644
--- a/include/linux/sched/task_stack.h
+++ b/include/linux/sched/task_stack.h
@@ -60,7 +60,7 @@ static inline unsigned long *end_of_stack(struct task_struct *p)
#ifdef CONFIG_THREAD_INFO_IN_TASK
static inline void *try_get_task_stack(struct task_struct *tsk)
{
- return atomic_inc_not_zero(&tsk->stack_refcount) ?
+ return refcount_inc_not_zero(&tsk->stack_refcount) ?
task_stack_page(tsk) : NULL;
}
diff --git a/kernel/fork.c b/kernel/fork.c
index cfd8a42..6fd6be0 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -354,7 +354,7 @@ static void release_task_stack(struct task_struct *tsk)
#ifdef CONFIG_THREAD_INFO_IN_TASK
void put_task_stack(struct task_struct *tsk)
{
- if (atomic_dec_and_test(&tsk->stack_refcount))
+ if (refcount_dec_and_test(&tsk->stack_refcount))
release_task_stack(tsk);
}
#endif
@@ -372,7 +372,7 @@ void free_task(struct task_struct *tsk)
* If the task had a separate stack allocation, it should be gone
* by now.
*/
- WARN_ON_ONCE(atomic_read(&tsk->stack_refcount) != 0);
+ WARN_ON_ONCE(refcount_read(&tsk->stack_refcount) != 0);
#endif
rt_mutex_debug_task_free(tsk);
ftrace_graph_exit_task(tsk);
@@ -532,7 +532,7 @@ static struct task_struct *dup_task_struct(struct task_struct *orig, int node)
tsk->stack_vm_area = stack_vm_area;
#endif
#ifdef CONFIG_THREAD_INFO_IN_TASK
- atomic_set(&tsk->stack_refcount, 1);
+ refcount_set(&tsk->stack_refcount, 1);
#endif
if (err)
--
2.7.4
On Mon, 17 Jul 2017, Elena Reshetova wrote:
> Subject: kernel: convert futex_pi_state.refcount from atomic_t to refcount_t
Several people including myself told you already, that subjects consist of
SUBSYSTEMPREFIX: Concise description
It's easy enough to figure the prefix out by looking at the output of 'git
log path/of/changed/file'.
Concise descriptions are not lengthy sentences with implementation
details. They should merily describe the problem/concept of change. The
details go into the changelog. IOW, something like:
"PROPERPREFIX: Convert to refcount API"
would be sufficient.
> refcount_t type and corresponding API should be
> used instead of atomic_t when the variable is used as
> a reference counter. This allows to avoid accidental
> refcounter overflows that might lead to use-after-free
> situations.
Copying the same sentence over and over avoids thinking about a proper
changelog, right? You fail to explain, how you come to the conclusion that
futex_pi_state.refcount is a pure reference counter (aside of the name) and
therefor can be safely converted to refcount_t.
Other than that, the patch itself is fine.
Thanks,
tglx
> On Mon, 17 Jul 2017, Elena Reshetova wrote:
>
> > Subject: kernel: convert futex_pi_state.refcount from atomic_t to refcount_t
>
> Several people including myself told you already, that subjects consist of
>
> SUBSYSTEMPREFIX: Concise description
>
> It's easy enough to figure the prefix out by looking at the output of 'git
> log path/of/changed/file'.
Ok, I will try this from now on. I didn't think of it, but was trying to figure it
based on general location and meaning (obviously wrong).
>
> Concise descriptions are not lengthy sentences with implementation
> details. They should merily describe the problem/concept of change. The
> details go into the changelog. IOW, something like:
>
> "PROPERPREFIX: Convert to refcount API"
>
> would be sufficient.
OK, will fix.
>
> > refcount_t type and corresponding API should be
> > used instead of atomic_t when the variable is used as
> > a reference counter. This allows to avoid accidental
> > refcounter overflows that might lead to use-after-free
> > situations.
>
> Copying the same sentence over and over avoids thinking about a proper
> changelog, right? You fail to explain, how you come to the conclusion that
> futex_pi_state.refcount is a pure reference counter (aside of the name) and
> therefor can be safely converted to refcount_t.
OK, this is not very useful for many cases. Yes, I am using automated log on
these patches, because I used to have 240 of them and writing manual logs for them
would be fun. Moreover, in many cases, writing manual logs don't bring any value since
I would have to repeat the same things all over again: xyz conversions was found by using *.cocci
pattern first, then looked at manually and it looked like a standard reference counter that
frees the things after calling refcount_dec_and_test() (or its variation with lock which is rare).
Other things also looked correct, like I didn't see increments from zero, counter starts at 1 etc.
I would really have to repeat the same thing in each changelog. Does it really bring value?
Best Regards,
Elena.
>
> Other than that, the patch itself is fine.
>
> Thanks,
>
> tglx
On Mon, 17 Jul 2017, Reshetova, Elena wrote:
> > On Mon, 17 Jul 2017, Elena Reshetova wrote:
> > > refcount_t type and corresponding API should be
> > > used instead of atomic_t when the variable is used as
> > > a reference counter. This allows to avoid accidental
> > > refcounter overflows that might lead to use-after-free
> > > situations.
> >
> > Copying the same sentence over and over avoids thinking about a proper
> > changelog, right? You fail to explain, how you come to the conclusion that
> > futex_pi_state.refcount is a pure reference counter (aside of the name) and
> > therefor can be safely converted to refcount_t.
> OK, this is not very useful for many cases. Yes, I am using automated log
> on these patches, because I used to have 240 of them and writing manual
> logs for them would be fun.
Been there, done that.
> Moreover, in many cases, writing manual logs don't bring any value since
> I would have to repeat the same things all over again: xyz conversions
> was found by using *.cocci pattern first, then looked at manually and it
> looked like a standard reference counter that frees the things after
> calling refcount_dec_and_test() (or its variation with lock which is
> rare). Other things also looked correct, like I didn't see increments
> from zero, counter starts at 1 etc. I would really have to repeat the
> same thing in each changelog. Does it really bring value?
You don't have to go into that level of detail, but you can provide enough
information with a template as well, e.g.:
atomic_t variables are often used to implement pure reference counters:
- starting at 1
- freeing a resource after reaching zero
- only using basic atomic operations (init, inc, dec_and_test)
These variables should be converted to refcount_t because the refcount_t
operations can catch and prevent accidental underflows and overflows.
The variable FOO is used as a pure reference counter. Convert it to
refcount_t and fix up the operations.
That gives enough context for someone who looks at a patch because then the
reviewer can look for:
starts at 1, frees at 0, does not use any fancy operations
and has not to use Gurgle to figure out what your understanding of
reference counters is.
Replacing FOO with the real variable name can be done with a script easy
enough.
Thanks,
tglx
> On Mon, 17 Jul 2017, Reshetova, Elena wrote:
> > > On Mon, 17 Jul 2017, Elena Reshetova wrote:
> > > > refcount_t type and corresponding API should be
> > > > used instead of atomic_t when the variable is used as
> > > > a reference counter. This allows to avoid accidental
> > > > refcounter overflows that might lead to use-after-free
> > > > situations.
> > >
> > > Copying the same sentence over and over avoids thinking about a proper
> > > changelog, right? You fail to explain, how you come to the conclusion that
> > > futex_pi_state.refcount is a pure reference counter (aside of the name) and
> > > therefor can be safely converted to refcount_t.
>
> > OK, this is not very useful for many cases. Yes, I am using automated log
> > on these patches, because I used to have 240 of them and writing manual
> > logs for them would be fun.
>
> Been there, done that.
>
> > Moreover, in many cases, writing manual logs don't bring any value since
> > I would have to repeat the same things all over again: xyz conversions
> > was found by using *.cocci pattern first, then looked at manually and it
> > looked like a standard reference counter that frees the things after
> > calling refcount_dec_and_test() (or its variation with lock which is
> > rare). Other things also looked correct, like I didn't see increments
> > from zero, counter starts at 1 etc. I would really have to repeat the
> > same thing in each changelog. Does it really bring value?
>
> You don't have to go into that level of detail, but you can provide enough
> information with a template as well, e.g.:
>
> atomic_t variables are often used to implement pure reference counters:
> - starting at 1
> - freeing a resource after reaching zero
> - only using basic atomic operations (init, inc, dec_and_test)
>
> These variables should be converted to refcount_t because the refcount_t
> operations can catch and prevent accidental underflows and overflows.
>
> The variable FOO is used as a pure reference counter. Convert it to
> refcount_t and fix up the operations.
>
> That gives enough context for someone who looks at a patch because then the
> reviewer can look for:
>
> starts at 1, frees at 0, does not use any fancy operations
>
> and has not to use Gurgle to figure out what your understanding of
> reference counters is.
>
> Replacing FOO with the real variable name can be done with a script easy
> enough.
Ok, let me try updating the commits messages in the above way. As soon as I
don't have to write them manually, I am fine with anything :)
Best Regards,
Elena.
>
> Thanks,
>
> tglx