2017-08-01 11:41:16

by Arvind Yadav

[permalink] [raw]
Subject: [PATCH 6/6] mtd: st_spi_fsm: Handle clk_prepare_enable/clk_disable_unprepare.

- clk_prepare_enable() can fail here and we must check its return value.
- stfsm_probe() can fail here and we must disable clock.

Signed-off-by: Arvind Yadav <[email protected]>
---
drivers/mtd/devices/st_spi_fsm.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 21afd94..7bc29d7 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -2073,15 +2073,17 @@ static int stfsm_probe(struct platform_device *pdev)
ret = stfsm_init(fsm);
if (ret) {
dev_err(&pdev->dev, "Failed to initialise FSM Controller\n");
- return ret;
+ goto err_clk_unprepare;
}

stfsm_fetch_platform_configs(pdev);

/* Detect SPI FLASH device */
info = stfsm_jedec_probe(fsm);
- if (!info)
- return -ENODEV;
+ if (!info) {
+ ret = -ENODEV;
+ goto err_clk_unprepare;
+ }
fsm->info = info;

/* Use device size to determine address width */
@@ -2095,11 +2097,11 @@ static int stfsm_probe(struct platform_device *pdev)
if (info->config) {
ret = info->config(fsm);
if (ret)
- return ret;
+ goto err_clk_unprepare;
} else {
ret = stfsm_prepare_rwe_seqs_default(fsm);
if (ret)
- return ret;
+ goto err_clk_unprepare;
}

fsm->mtd.name = info->name;
@@ -2124,6 +2126,10 @@ static int stfsm_probe(struct platform_device *pdev)
fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));

return mtd_device_register(&fsm->mtd, NULL, 0);
+
+err_clk_unprepare:
+ clk_disable_unprepare(fsm->clk);
+ return ret;
}

static int stfsm_remove(struct platform_device *pdev)
@@ -2147,9 +2153,7 @@ static int stfsmfsm_resume(struct device *dev)
{
struct stfsm *fsm = dev_get_drvdata(dev);

- clk_prepare_enable(fsm->clk);
-
- return 0;
+ return clk_prepare_enable(fsm->clk);
}
#endif

--
1.9.1