In P9, OCC (On-Chip-Controller) supports shared memory based
commad-response interface. Within the shared memory there is an OPAL
command buffer and OCC response buffer that can be used to send
inband commands to OCC. The following commands are supported:
1) Set system powercap
2) Set CPU-GPU power shifting ratio
3) Clear min/max for OCC sensor groups
Changes from V10:
- Rebased on powerpc-next
- Add sysfs interface instead of IOCTL
(Skiboot patch for Patch3 is posted below:
https://lists.ozlabs.org/pipermail/skiboot/2017-August/008553.html )
Shilpasri G Bhat (3):
powernv: powercap: Add support for powercap framework
powernv: Add support to set power-shifting-ratio
powernv: Add support to clear sensor groups data
.../ABI/testing/sysfs-firmware-opal-powercap | 31 +++
Documentation/ABI/testing/sysfs-firmware-opal-psr | 18 ++
.../bindings/powerpc/opal/sensor-groups.txt | 27 +++
arch/powerpc/include/asm/opal-api.h | 6 +
arch/powerpc/include/asm/opal.h | 10 +
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/opal-powercap.c | 244 +++++++++++++++++++++
arch/powerpc/platforms/powernv/opal-psr.c | 175 +++++++++++++++
.../powerpc/platforms/powernv/opal-sensor-groups.c | 212 ++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 5 +
arch/powerpc/platforms/powernv/opal.c | 10 +
11 files changed, 739 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/testing/sysfs-firmware-opal-powercap
create mode 100644 Documentation/ABI/testing/sysfs-firmware-opal-psr
create mode 100644 Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
create mode 100644 arch/powerpc/platforms/powernv/opal-powercap.c
create mode 100644 arch/powerpc/platforms/powernv/opal-psr.c
create mode 100644 arch/powerpc/platforms/powernv/opal-sensor-groups.c
--
1.8.3.1
Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat <[email protected]>
---
.../ABI/testing/sysfs-firmware-opal-powercap | 31 +++
arch/powerpc/include/asm/opal-api.h | 3 +
arch/powerpc/include/asm/opal.h | 5 +
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/opal-powercap.c | 244 +++++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 2 +
arch/powerpc/platforms/powernv/opal.c | 4 +
7 files changed, 290 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/testing/sysfs-firmware-opal-powercap
create mode 100644 arch/powerpc/platforms/powernv/opal-powercap.c
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
new file mode 100644
index 0000000..c9b66ec
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
@@ -0,0 +1,31 @@
+What: /sys/firmware/opal/powercap
+Date: August 2017
+Contact: Linux for PowerPC mailing list <[email protected]>
+Description: Powercap directory for Powernv (P8, P9) servers
+
+ Each folder in this directory contains a
+ power-cappable component.
+
+What: /sys/firmware/opal/powercap/system-powercap
+ /sys/firmware/opal/powercap/system-powercap/powercap-min
+ /sys/firmware/opal/powercap/system-powercap/powercap-max
+ /sys/firmware/opal/powercap/system-powercap/powercap-current
+Date: August 2017
+Contact: Linux for PowerPC mailing list <[email protected]>
+Description: System powercap directory and attributes applicable for
+ Powernv (P8, P9) servers
+
+ This directory provides powercap information. It
+ contains below sysfs attributes:
+
+ - powercap-min : This file provides the minimum
+ possible powercap in Watt units
+
+ - powercap-max : This file provides the maximum
+ possible powercap in Watt units
+
+ - powercap-current : This file provides the current
+ powercap set on the system. Writing to this file
+ creates a request for setting a new-powercap. The
+ powercap requested must be between powercap-min
+ and powercap-max.
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index ced1ef2..b87305b 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -42,6 +42,7 @@
#define OPAL_I2C_STOP_ERR -24
#define OPAL_XIVE_PROVISIONING -31
#define OPAL_XIVE_FREE_ACTIVE -32
+#define OPAL_TIMEOUT -33
/* API Tokens (in r0) */
#define OPAL_INVALID_CALL -1
@@ -193,6 +194,8 @@
#define OPAL_IMC_COUNTERS_INIT 149
#define OPAL_IMC_COUNTERS_START 150
#define OPAL_IMC_COUNTERS_STOP 151
+#define OPAL_GET_POWERCAP 152
+#define OPAL_SET_POWERCAP 153
#define OPAL_PCI_SET_P2P 157
#define OPAL_LAST 157
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 5a715e6..6f09ab7 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -275,6 +275,9 @@ int64_t opal_imc_counters_init(uint32_t type, uint64_t address,
int64_t opal_imc_counters_start(uint32_t type, uint64_t cpu_pir);
int64_t opal_imc_counters_stop(uint32_t type, uint64_t cpu_pir);
+int opal_get_powercap(u32 handle, int token, u32 *pcap);
+int opal_set_powercap(u32 handle, int token, u32 pcap);
+
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
int depth, void *data);
@@ -352,6 +355,8 @@ static inline int opal_get_async_rc(struct opal_msg msg)
void opal_wake_poller(void);
+void opal_powercap_init(void);
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_OPAL_H */
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index a0d4353..f9ec36d 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,7 +2,7 @@ obj-y += setup.o opal-wrappers.o opal.o opal-async.o idle.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
obj-y += opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
-obj-y += opal-kmsg.o
+obj-y += opal-kmsg.o opal-powercap.o
obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o
diff --git a/arch/powerpc/platforms/powernv/opal-powercap.c b/arch/powerpc/platforms/powernv/opal-powercap.c
new file mode 100644
index 0000000..badb29b
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-powercap.c
@@ -0,0 +1,244 @@
+/*
+ * PowerNV OPAL Powercap interface
+ *
+ * Copyright 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) "opal-powercap: " fmt
+
+#include <linux/of.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
+
+#include <asm/opal.h>
+
+DEFINE_MUTEX(powercap_mutex);
+
+static struct kobject *powercap_kobj;
+
+struct powercap_attr {
+ u32 handle;
+ struct kobj_attribute attr;
+};
+
+static struct pcap {
+ struct attribute_group pg;
+ struct powercap_attr *pattrs;
+} *pcaps;
+
+static ssize_t powercap_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
+{
+ struct powercap_attr *pcap_attr = container_of(attr,
+ struct powercap_attr, attr);
+ struct opal_msg msg;
+ u32 pcap;
+ int ret, token;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ pr_devel("Failed to get token\n");
+ return token;
+ }
+
+ ret = mutex_lock_interruptible(&powercap_mutex);
+ if (ret)
+ goto out_token;
+
+ ret = opal_get_powercap(pcap_attr->handle, token, (u32 *)__pa(&pcap));
+ switch (ret) {
+ case OPAL_ASYNC_COMPLETION:
+ ret = opal_async_wait_response(token, &msg);
+ if (ret) {
+ pr_devel("Failed to wait for the async response\n");
+ ret = -EIO;
+ goto out;
+ }
+ ret = opal_error_code(opal_get_async_rc(msg));
+ if (!ret) {
+ ret = sprintf(buf, "%u\n", be32_to_cpu(pcap));
+ if (ret < 0)
+ ret = -EIO;
+ }
+ break;
+ case OPAL_SUCCESS:
+ ret = sprintf(buf, "%u\n", be32_to_cpu(pcap));
+ if (ret < 0)
+ ret = -EIO;
+ break;
+ default:
+ ret = opal_error_code(ret);
+ }
+
+out:
+ mutex_unlock(&powercap_mutex);
+out_token:
+ opal_async_release_token(token);
+ return ret;
+}
+
+static ssize_t powercap_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct powercap_attr *pcap_attr = container_of(attr,
+ struct powercap_attr, attr);
+ struct opal_msg msg;
+ u32 pcap;
+ int ret, token;
+
+ ret = kstrtoint(buf, 0, &pcap);
+ if (ret)
+ return ret;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ pr_devel("Failed to get token\n");
+ return token;
+ }
+
+ ret = mutex_lock_interruptible(&powercap_mutex);
+ if (ret)
+ goto out_token;
+
+ ret = opal_set_powercap(pcap_attr->handle, token, pcap);
+ switch (ret) {
+ case OPAL_ASYNC_COMPLETION:
+ ret = opal_async_wait_response(token, &msg);
+ if (ret) {
+ pr_devel("Failed to wait for the async response\n");
+ ret = -EIO;
+ goto out;
+ }
+ ret = opal_error_code(opal_get_async_rc(msg));
+ if (!ret)
+ ret = count;
+ break;
+ case OPAL_SUCCESS:
+ ret = count;
+ break;
+ default:
+ ret = opal_error_code(ret);
+ }
+
+out:
+ mutex_unlock(&powercap_mutex);
+out_token:
+ opal_async_release_token(token);
+ return ret;
+}
+
+static void powercap_add_attr(int handle, const char *name,
+ struct powercap_attr *attr)
+{
+ attr->handle = handle;
+ sysfs_attr_init(&attr->attr.attr);
+ attr->attr.attr.name = name;
+ attr->attr.attr.mode = 0444;
+ attr->attr.show = powercap_show;
+}
+
+void __init opal_powercap_init(void)
+{
+ struct device_node *powercap, *node;
+ int i = 0;
+
+ powercap = of_find_compatible_node(NULL, NULL, "ibm,opal-powercap");
+ if (!powercap) {
+ pr_devel("Powercap node not found\n");
+ return;
+ }
+
+ pcaps = kcalloc(of_get_child_count(powercap), sizeof(*pcaps),
+ GFP_KERNEL);
+ if (!pcaps)
+ return;
+
+ powercap_kobj = kobject_create_and_add("powercap", opal_kobj);
+ if (!powercap_kobj) {
+ pr_warn("Failed to create powercap kobject\n");
+ goto out_pcaps;
+ }
+
+ i = 0;
+ for_each_child_of_node(powercap, node) {
+ u32 cur, min, max;
+ int j = 0;
+ bool has_cur = false, has_min = false, has_max = false;
+
+ if (!of_property_read_u32(node, "powercap-min", &min)) {
+ j++;
+ has_min = true;
+ }
+
+ if (!of_property_read_u32(node, "powercap-max", &max)) {
+ j++;
+ has_max = true;
+ }
+
+ if (!of_property_read_u32(node, "powercap-current", &cur)) {
+ j++;
+ has_cur = true;
+ }
+
+ pcaps[i].pattrs = kcalloc(j, sizeof(struct powercap_attr),
+ GFP_KERNEL);
+ if (!pcaps[i].pattrs)
+ goto out_pcaps_pattrs;
+
+ pcaps[i].pg.attrs = kcalloc(j + 1, sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!pcaps[i].pg.attrs) {
+ kfree(pcaps[i].pattrs);
+ goto out_pcaps_pattrs;
+ }
+
+ j = 0;
+ pcaps[i].pg.name = node->name;
+ if (has_min) {
+ powercap_add_attr(min, "powercap-min",
+ &pcaps[i].pattrs[j]);
+ pcaps[i].pg.attrs[j] = &pcaps[i].pattrs[j].attr.attr;
+ j++;
+ }
+
+ if (has_max) {
+ powercap_add_attr(max, "powercap-max",
+ &pcaps[i].pattrs[j]);
+ pcaps[i].pg.attrs[j] = &pcaps[i].pattrs[j].attr.attr;
+ j++;
+ }
+
+ if (has_cur) {
+ powercap_add_attr(cur, "powercap-current",
+ &pcaps[i].pattrs[j]);
+ pcaps[i].pattrs[j].attr.attr.mode |= 0220;
+ pcaps[i].pattrs[j].attr.store = powercap_store;
+ pcaps[i].pg.attrs[j] = &pcaps[i].pattrs[j].attr.attr;
+ j++;
+ }
+
+ if (sysfs_create_group(powercap_kobj, &pcaps[i].pg)) {
+ pr_warn("Failed to create powercap attribute group %s\n",
+ pcaps[i].pg.name);
+ goto out_pcaps_pattrs;
+ }
+ i++;
+ }
+
+ return;
+
+out_pcaps_pattrs:
+ while (--i >= 0) {
+ kfree(pcaps[i].pattrs);
+ kfree(pcaps[i].pg.attrs);
+ }
+ kobject_put(powercap_kobj);
+out_pcaps:
+ kfree(pcaps);
+}
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 3369a6f..139286c 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -314,3 +314,5 @@ OPAL_CALL(opal_imc_counters_init, OPAL_IMC_COUNTERS_INIT);
OPAL_CALL(opal_imc_counters_start, OPAL_IMC_COUNTERS_START);
OPAL_CALL(opal_imc_counters_stop, OPAL_IMC_COUNTERS_STOP);
OPAL_CALL(opal_pci_set_p2p, OPAL_PCI_SET_P2P);
+OPAL_CALL(opal_get_powercap, OPAL_GET_POWERCAP);
+OPAL_CALL(opal_set_powercap, OPAL_SET_POWERCAP);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 946158e..28323c7 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -850,6 +850,9 @@ static int __init opal_init(void)
/* Initialise OPAL kmsg dumper for flushing console on panic */
opal_kmsg_init();
+ /* Initialise OPAL powercap interface */
+ opal_powercap_init();
+
return 0;
}
machine_subsys_initcall(powernv, opal_init);
@@ -966,6 +969,7 @@ int opal_error_code(int rc)
case OPAL_UNSUPPORTED: return -EIO;
case OPAL_HARDWARE: return -EIO;
case OPAL_INTERNAL_ERROR: return -EIO;
+ case OPAL_TIMEOUT: return -ETIMEDOUT;
default:
pr_err("%s: unexpected OPAL error %d\n", __func__, rc);
return -EIO;
--
1.8.3.1
This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.
Signed-off-by: Shilpasri G Bhat <[email protected]>
---
Documentation/ABI/testing/sysfs-firmware-opal-psr | 18 +++
arch/powerpc/include/asm/opal-api.h | 2 +
arch/powerpc/include/asm/opal.h | 3 +
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/opal-psr.c | 175 ++++++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 2 +
arch/powerpc/platforms/powernv/opal.c | 3 +
7 files changed, 204 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/testing/sysfs-firmware-opal-psr
create mode 100644 arch/powerpc/platforms/powernv/opal-psr.c
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-psr b/Documentation/ABI/testing/sysfs-firmware-opal-psr
new file mode 100644
index 0000000..cc2ece7
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-psr
@@ -0,0 +1,18 @@
+What: /sys/firmware/opal/psr
+Date: August 2017
+Contact: Linux for PowerPC mailing list <[email protected]>
+Description: Power-Shift-Ratio directory for Powernv P9 servers
+
+ Power-Shift-Ratio allows to provide hints the firmware
+ to shift/throttle power between different entities in
+ the system. Each attribute in this directory indicates
+ a settable PSR.
+
+What: /sys/firmware/opal/psr/cpu_to_gpu_X
+Date: August 2017
+Contact: Linux for PowerPC mailing list <[email protected]>
+Description: PSR sysfs attributes for Powernv P9 servers
+
+ Power-Shift-Ratio between CPU and GPU for a given chip
+ with chip-id X. This file gives the ratio (0-100)
+ which is used by OCC for power-capping.
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index b87305b..0cb7d11 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -196,6 +196,8 @@
#define OPAL_IMC_COUNTERS_STOP 151
#define OPAL_GET_POWERCAP 152
#define OPAL_SET_POWERCAP 153
+#define OPAL_GET_POWER_SHIFT_RATIO 154
+#define OPAL_SET_POWER_SHIFT_RATIO 155
#define OPAL_PCI_SET_P2P 157
#define OPAL_LAST 157
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 6f09ab7..d87ffcb 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -277,6 +277,8 @@ int64_t opal_imc_counters_init(uint32_t type, uint64_t address,
int opal_get_powercap(u32 handle, int token, u32 *pcap);
int opal_set_powercap(u32 handle, int token, u32 pcap);
+int opal_get_power_shift_ratio(u32 handle, int token, u32 *psr);
+int opal_set_power_shift_ratio(u32 handle, int token, u32 psr);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
@@ -356,6 +358,7 @@ static inline int opal_get_async_rc(struct opal_msg msg)
void opal_wake_poller(void);
void opal_powercap_init(void);
+void opal_psr_init(void);
#endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index f9ec36d..674ed1e 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,7 +2,7 @@ obj-y += setup.o opal-wrappers.o opal.o opal-async.o idle.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
obj-y += opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
-obj-y += opal-kmsg.o opal-powercap.o
+obj-y += opal-kmsg.o opal-powercap.o opal-psr.o
obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o
diff --git a/arch/powerpc/platforms/powernv/opal-psr.c b/arch/powerpc/platforms/powernv/opal-psr.c
new file mode 100644
index 0000000..7313b7f
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-psr.c
@@ -0,0 +1,175 @@
+/*
+ * PowerNV OPAL Power-Shift-Ratio interface
+ *
+ * Copyright 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) "opal-psr: " fmt
+
+#include <linux/of.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
+
+#include <asm/opal.h>
+
+DEFINE_MUTEX(psr_mutex);
+
+static struct kobject *psr_kobj;
+
+struct psr_attr {
+ u32 handle;
+ struct kobj_attribute attr;
+} *psr_attrs;
+
+static ssize_t psr_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
+{
+ struct psr_attr *psr_attr = container_of(attr, struct psr_attr, attr);
+ struct opal_msg msg;
+ int psr, ret, token;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ pr_devel("Failed to get token\n");
+ return token;
+ }
+
+ ret = mutex_lock_interruptible(&psr_mutex);
+ if (ret)
+ goto out_token;
+
+ ret = opal_get_power_shift_ratio(psr_attr->handle, token,
+ (u32 *)__pa(&psr));
+ switch (ret) {
+ case OPAL_ASYNC_COMPLETION:
+ ret = opal_async_wait_response(token, &msg);
+ if (ret) {
+ pr_devel("Failed to wait for the async response\n");
+ ret = -EIO;
+ goto out;
+ }
+ ret = opal_error_code(opal_get_async_rc(msg));
+ if (!ret) {
+ ret = sprintf(buf, "%u\n", be32_to_cpu(psr));
+ if (ret < 0)
+ ret = -EIO;
+ }
+ break;
+ case OPAL_SUCCESS:
+ ret = sprintf(buf, "%u\n", be32_to_cpu(psr));
+ if (ret < 0)
+ ret = -EIO;
+ break;
+ default:
+ ret = opal_error_code(ret);
+ }
+
+out:
+ mutex_unlock(&psr_mutex);
+out_token:
+ opal_async_release_token(token);
+ return ret;
+}
+
+static ssize_t psr_store(struct kobject *kobj, struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct psr_attr *psr_attr = container_of(attr, struct psr_attr, attr);
+ struct opal_msg msg;
+ int psr, ret, token;
+
+ ret = kstrtoint(buf, 0, &psr);
+ if (ret)
+ return ret;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ pr_devel("Failed to get token\n");
+ return token;
+ }
+
+ ret = mutex_lock_interruptible(&psr_mutex);
+ if (ret)
+ goto out_token;
+
+ ret = opal_set_power_shift_ratio(psr_attr->handle, token, psr);
+ switch (ret) {
+ case OPAL_ASYNC_COMPLETION:
+ ret = opal_async_wait_response(token, &msg);
+ if (ret) {
+ pr_devel("Failed to wait for the async response\n");
+ ret = -EIO;
+ goto out;
+ }
+ ret = opal_error_code(opal_get_async_rc(msg));
+ if (!ret)
+ ret = count;
+ break;
+ case OPAL_SUCCESS:
+ ret = count;
+ break;
+ default:
+ ret = opal_error_code(ret);
+ }
+
+out:
+ mutex_unlock(&psr_mutex);
+out_token:
+ opal_async_release_token(token);
+ return ret;
+}
+
+void __init opal_psr_init(void)
+{
+ struct device_node *psr, *node;
+ int i = 0;
+
+ psr = of_find_compatible_node(NULL, NULL,
+ "ibm,opal-power-shift-ratio");
+ if (!psr) {
+ pr_devel("Power-shift-ratio node not found\n");
+ return;
+ }
+
+ psr_attrs = kcalloc(of_get_child_count(psr), sizeof(struct psr_attr),
+ GFP_KERNEL);
+ if (!psr_attrs)
+ return;
+
+ psr_kobj = kobject_create_and_add("psr", opal_kobj);
+ if (!psr_kobj) {
+ pr_warn("Failed to create psr kobject\n");
+ goto out;
+ }
+
+ for_each_child_of_node(psr, node) {
+ if (of_property_read_u32(node, "handle",
+ &psr_attrs[i].handle))
+ goto out_kobj;
+
+ sysfs_attr_init(&psr_attrs[i].attr.attr);
+ if (of_property_read_string(node, "label",
+ &psr_attrs[i].attr.attr.name))
+ goto out_kobj;
+ psr_attrs[i].attr.attr.mode = 0664;
+ psr_attrs[i].attr.show = psr_show;
+ psr_attrs[i].attr.store = psr_store;
+ if (sysfs_create_file(psr_kobj, &psr_attrs[i].attr.attr)) {
+ pr_devel("Failed to create psr sysfs file %s\n",
+ psr_attrs[i].attr.attr.name);
+ goto out_kobj;
+ }
+ i++;
+ }
+
+ return;
+out_kobj:
+ kobject_put(psr_kobj);
+out:
+ kfree(psr_attrs);
+}
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 139286c..09cc6ec 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -316,3 +316,5 @@ OPAL_CALL(opal_imc_counters_stop, OPAL_IMC_COUNTERS_STOP);
OPAL_CALL(opal_pci_set_p2p, OPAL_PCI_SET_P2P);
OPAL_CALL(opal_get_powercap, OPAL_GET_POWERCAP);
OPAL_CALL(opal_set_powercap, OPAL_SET_POWERCAP);
+OPAL_CALL(opal_get_power_shift_ratio, OPAL_GET_POWER_SHIFT_RATIO);
+OPAL_CALL(opal_set_power_shift_ratio, OPAL_SET_POWER_SHIFT_RATIO);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 28323c7..f659edb 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -853,6 +853,9 @@ static int __init opal_init(void)
/* Initialise OPAL powercap interface */
opal_powercap_init();
+ /* Initialise OPAL Power-Shifting-Ratio interface */
+ opal_psr_init();
+
return 0;
}
machine_subsys_initcall(powernv, opal_init);
--
1.8.3.1
Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat <[email protected]>
---
.../bindings/powerpc/opal/sensor-groups.txt | 27 +++
arch/powerpc/include/asm/opal-api.h | 1 +
arch/powerpc/include/asm/opal.h | 2 +
arch/powerpc/platforms/powernv/Makefile | 2 +-
.../powerpc/platforms/powernv/opal-sensor-groups.c | 212 +++++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 1 +
arch/powerpc/platforms/powernv/opal.c | 3 +
7 files changed, 247 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
create mode 100644 arch/powerpc/platforms/powernv/opal-sensor-groups.c
diff --git a/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
new file mode 100644
index 0000000..6ad881c
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
@@ -0,0 +1,27 @@
+IBM OPAL Sensor Groups Binding
+-------------------------------
+
+Node: /ibm,opal/sensor-groups
+
+Description: Contains sensor groups available in the Powernv P9
+servers. Each child node indicates a sensor group.
+
+- compatible : Should be "ibm,opal-sensor-group"
+
+Each child node contains below properties:
+
+- type : String to indicate the type of sensor-group
+
+- sensor-group-id: Abstract unique identifier provided by firmware of
+ type <u32> which is used for sensor-group
+ operations like clearing the min/max history of all
+ sensors belonging to the group.
+
+- ibm,chip-id : Chip ID
+
+- sensors : Phandle array of child nodes of /ibm,opal/sensor/
+ belonging to this group
+
+- ops : Array of opal-call numbers indicating available operations on
+ sensor groups like clearing min/max, enabling/disabling sensor
+ group.
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 0cb7d11..450a60b 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -198,6 +198,7 @@
#define OPAL_SET_POWERCAP 153
#define OPAL_GET_POWER_SHIFT_RATIO 154
#define OPAL_SET_POWER_SHIFT_RATIO 155
+#define OPAL_SENSOR_GROUP_CLEAR 156
#define OPAL_PCI_SET_P2P 157
#define OPAL_LAST 157
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index d87ffcb..97ff192 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -279,6 +279,7 @@ int64_t opal_imc_counters_init(uint32_t type, uint64_t address,
int opal_set_powercap(u32 handle, int token, u32 pcap);
int opal_get_power_shift_ratio(u32 handle, int token, u32 *psr);
int opal_set_power_shift_ratio(u32 handle, int token, u32 psr);
+int opal_sensor_group_clear(u32 group_hndl, int token);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
@@ -359,6 +360,7 @@ static inline int opal_get_async_rc(struct opal_msg msg)
void opal_powercap_init(void);
void opal_psr_init(void);
+void opal_sensor_groups_init(void);
#endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 674ed1e..177b3d4 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,7 +2,7 @@ obj-y += setup.o opal-wrappers.o opal.o opal-async.o idle.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
obj-y += opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
-obj-y += opal-kmsg.o opal-powercap.o opal-psr.o
+obj-y += opal-kmsg.o opal-powercap.o opal-psr.o opal-sensor-groups.o
obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o
diff --git a/arch/powerpc/platforms/powernv/opal-sensor-groups.c b/arch/powerpc/platforms/powernv/opal-sensor-groups.c
new file mode 100644
index 0000000..7e5a235
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-sensor-groups.c
@@ -0,0 +1,212 @@
+/*
+ * PowerNV OPAL Sensor-groups interface
+ *
+ * Copyright 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) "opal-sensor-groups: " fmt
+
+#include <linux/of.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
+
+#include <asm/opal.h>
+
+DEFINE_MUTEX(sg_mutex);
+
+static struct kobject *sg_kobj;
+
+struct sg_attr {
+ u32 handle;
+ struct kobj_attribute attr;
+};
+
+static struct sensor_group {
+ char name[20];
+ struct attribute_group sg;
+ struct sg_attr *sgattrs;
+} *sgs;
+
+static ssize_t sg_store(struct kobject *kobj, struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sg_attr *sattr = container_of(attr, struct sg_attr, attr);
+ struct opal_msg msg;
+ u32 data;
+ int ret, token;
+
+ ret = kstrtoint(buf, 0, &data);
+ if (ret)
+ return ret;
+
+ if (data != 1)
+ return -EINVAL;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ pr_devel("Failed to get token\n");
+ return token;
+ }
+
+ ret = mutex_lock_interruptible(&sg_mutex);
+ if (ret)
+ goto out_token;
+
+ ret = opal_sensor_group_clear(sattr->handle, token);
+ switch (ret) {
+ case OPAL_ASYNC_COMPLETION:
+ ret = opal_async_wait_response(token, &msg);
+ if (ret) {
+ pr_devel("Failed to wait for the async response\n");
+ ret = -EIO;
+ goto out;
+ }
+ ret = opal_error_code(opal_get_async_rc(msg));
+ if (!ret)
+ ret = count;
+ break;
+ case OPAL_SUCCESS:
+ ret = count;
+ break;
+ default:
+ ret = opal_error_code(ret);
+ }
+
+out:
+ mutex_unlock(&sg_mutex);
+out_token:
+ opal_async_release_token(token);
+ return ret;
+}
+
+static struct sg_ops_info {
+ int opal_no;
+ const char *attr_name;
+ ssize_t (*store)(struct kobject *kobj, struct kobj_attribute *attr,
+ const char *buf, size_t count);
+} ops_info[] = {
+ { OPAL_SENSOR_GROUP_CLEAR, "clear", sg_store },
+};
+
+static void add_attr(int handle, struct sg_attr *attr, int index)
+{
+ attr->handle = handle;
+ sysfs_attr_init(&attr->attr.attr);
+ attr->attr.attr.name = ops_info[index].attr_name;
+ attr->attr.attr.mode = 0220;
+ attr->attr.store = ops_info[index].store;
+}
+
+static int add_attr_group(const __be32 *ops, int len, struct sensor_group *sg,
+ u32 handle)
+{
+ int i, j;
+ int count = 0;
+
+ for (i = 0; i < len; i++)
+ for (j = 0; j < ARRAY_SIZE(ops_info); j++)
+ if (be32_to_cpu(ops[i]) == ops_info[j].opal_no) {
+ add_attr(handle, &sg->sgattrs[count], j);
+ sg->sg.attrs[count] =
+ &sg->sgattrs[count].attr.attr;
+ count++;
+ }
+
+ return sysfs_create_group(sg_kobj, &sg->sg);
+}
+
+static int get_nr_attrs(const __be32 *ops, int len)
+{
+ int i, j;
+ int nr_attrs = 0;
+
+ for (i = 0; i < len; i++)
+ for (j = 0; j < ARRAY_SIZE(ops_info); j++)
+ if (be32_to_cpu(ops[i]) == ops_info[j].opal_no)
+ nr_attrs++;
+
+ return nr_attrs;
+}
+
+void __init opal_sensor_groups_init(void)
+{
+ struct device_node *sg, *node;
+ int i = 0;
+
+ sg = of_find_compatible_node(NULL, NULL, "ibm,opal-sensor-group");
+ if (!sg) {
+ pr_devel("Sensor groups node not found\n");
+ return;
+ }
+
+ sgs = kcalloc(of_get_child_count(sg), sizeof(*sgs), GFP_KERNEL);
+ if (!sgs)
+ return;
+
+ sg_kobj = kobject_create_and_add("sensor_groups", opal_kobj);
+ if (!sg_kobj) {
+ pr_warn("Failed to create sensor group kobject\n");
+ goto out_sgs;
+ }
+
+ for_each_child_of_node(sg, node) {
+ const __be32 *ops;
+ u32 sgid, len, nr_attrs, chipid;
+
+ ops = of_get_property(node, "ops", &len);
+ if (!ops)
+ continue;
+
+ nr_attrs = get_nr_attrs(ops, len);
+ if (!nr_attrs)
+ continue;
+
+ sgs[i].sgattrs = kcalloc(nr_attrs, sizeof(struct sg_attr),
+ GFP_KERNEL);
+ if (!sgs[i].sgattrs)
+ goto out_sgs_sgattrs;
+
+ sgs[i].sg.attrs = kcalloc(nr_attrs + 1,
+ sizeof(struct attribute *),
+ GFP_KERNEL);
+
+ if (!sgs[i].sg.attrs) {
+ kfree(sgs[i].sgattrs);
+ goto out_sgs_sgattrs;
+ }
+
+ if (of_property_read_u32(node, "sensor-group-id", &sgid)) {
+ pr_warn("sensor-group-id property not found\n");
+ goto out_sgs_sgattrs;
+ }
+
+ if (!of_property_read_u32(node, "ibm,chip-id", &chipid))
+ sprintf(sgs[i].name, "%s%d", node->name, chipid);
+ else
+ sprintf(sgs[i].name, "%s", node->name);
+
+ sgs[i].sg.name = sgs[i].name;
+ if (add_attr_group(ops, len, &sgs[i], sgid)) {
+ pr_warn("Failed to create sensor attribute group %s\n",
+ sgs[i].sg.name);
+ goto out_sgs_sgattrs;
+ }
+ i++;
+ }
+
+ return;
+
+out_sgs_sgattrs:
+ while (--i >= 0) {
+ kfree(sgs[i].sgattrs);
+ kfree(sgs[i].sg.attrs);
+ }
+ kobject_put(sg_kobj);
+out_sgs:
+ kfree(sgs);
+}
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 09cc6ec..951fa93 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -318,3 +318,4 @@ OPAL_CALL(opal_get_powercap, OPAL_GET_POWERCAP);
OPAL_CALL(opal_set_powercap, OPAL_SET_POWERCAP);
OPAL_CALL(opal_get_power_shift_ratio, OPAL_GET_POWER_SHIFT_RATIO);
OPAL_CALL(opal_set_power_shift_ratio, OPAL_SET_POWER_SHIFT_RATIO);
+OPAL_CALL(opal_sensor_group_clear, OPAL_SENSOR_GROUP_CLEAR);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index f659edb..3c122d0 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -856,6 +856,9 @@ static int __init opal_init(void)
/* Initialise OPAL Power-Shifting-Ratio interface */
opal_psr_init();
+ /* Initialise OPAL sensor groups */
+ opal_sensor_groups_init();
+
return 0;
}
machine_subsys_initcall(powernv, opal_init);
--
1.8.3.1
On Thu, 2017-08-10 at 03:31:18 UTC, Shilpasri G Bhat wrote:
> Adds a generic powercap framework to change the system powercap
> inband through OPAL-OCC command/response interface.
>
> Signed-off-by: Shilpasri G Bhat <[email protected]>
Series applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/cb8b340de21e1c57e1c6d4f26ccc4a
cheers