2017-08-10 16:46:36

by Anton Vasilyev

Subject: [PATCH v2] hwmon:(stts751) buffer overread on wrong chip configuration

If stts751 hw by some reason reports conversion rate bigger then 9:
ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE);
then dereference stts751_intervals[priv->interval] leads to buffer
overread.

The path adds sanity check for value stored on chip.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <[email protected]>
---
v2: Fixed Guenter's remark about comparison
---
drivers/hwmon/stts751.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/hwmon/stts751.c b/drivers/hwmon/stts751.c
index d56251d..3f940fb 100644
--- a/drivers/hwmon/stts751.c
+++ b/drivers/hwmon/stts751.c
@@ -718,6 +718,10 @@ static int stts751_read_chip_config(struct stts751_priv *priv)
ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE);
if (ret < 0)
return ret;
+ if (ret >= ARRAY_SIZE(stts751_intervals)) {
+ dev_err(priv->dev, "Unrecognized conversion rate 0x%x\n", ret);
+ return -ENODEV;
+ }
priv->interval = ret;

ret = stts751_read_reg16(priv, &priv->event_max,
--
2.7.4

2017-08-13 13:34:57

by Guenter Roeck

Subject: Re: [v2] hwmon:(stts751) buffer overread on wrong chip configuration

On Thu, Aug 10, 2017 at 07:46:32PM +0300, Anton Vasilyev wrote:
> If stts751 hw by some reason reports conversion rate bigger then 9:
> ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE);
> then dereference stts751_intervals[priv->interval] leads to buffer
> overread.
>
> The path adds sanity check for value stored on chip.
>
> Found by Linux Driver Verification project (linuxtesting.org).
>
> Signed-off-by: Anton Vasilyev <[email protected]>

Applied (after s/path/patch/)

Thanks,
Guenter

> ---
> v2: Fixed Guenter's remark about comparison
> ---
> drivers/hwmon/stts751.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/hwmon/stts751.c b/drivers/hwmon/stts751.c
> index d56251d..3f940fb 100644
> --- a/drivers/hwmon/stts751.c
> +++ b/drivers/hwmon/stts751.c
> @@ -718,6 +718,10 @@ static int stts751_read_chip_config(struct stts751_priv *priv)
> ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE);
> if (ret < 0)
> return ret;
> + if (ret >= ARRAY_SIZE(stts751_intervals)) {
> + dev_err(priv->dev, "Unrecognized conversion rate 0x%x\n", ret);
> + return -ENODEV;
> + }
> priv->interval = ret;
>
> ret = stts751_read_reg16(priv, &priv->event_max,