From: Haiyang Zhang <[email protected]>
The parameter "sk" is not in use.
Signed-off-by: Haiyang Zhang <[email protected]>
---
drivers/net/hyperv/netvsc_drv.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index b33f050..4677d21 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -193,7 +193,7 @@ static int netvsc_close(struct net_device *net)
/* Azure hosts don't support non-TCP port numbers in hashing yet. We compute
* hash for non-TCP traffic with only IP numbers.
*/
-static inline u32 netvsc_get_hash(struct sk_buff *skb, struct sock *sk)
+static inline u32 netvsc_get_hash(struct sk_buff *skb)
{
struct flow_keys flow;
u32 hash;
@@ -227,7 +227,7 @@ static inline int netvsc_get_tx_queue(struct net_device *ndev,
struct sock *sk = skb->sk;
int q_idx;
- q_idx = ndc->tx_send_table[netvsc_get_hash(skb, sk) &
+ q_idx = ndc->tx_send_table[netvsc_get_hash(skb) &
(VRSS_SEND_TAB_SIZE - 1)];
/* If queue index changed record the new value */
--
1.7.1
From: Haiyang Zhang <[email protected]>
The parameter "nvdev" is not in use.
Signed-off-by: Haiyang Zhang <[email protected]>
---
drivers/net/hyperv/netvsc_drv.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 4677d21..d8612b1 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1228,8 +1228,7 @@ static void netvsc_get_strings(struct net_device *dev, u32 stringset, u8 *data)
}
static int
-netvsc_get_rss_hash_opts(struct netvsc_device *nvdev,
- struct ethtool_rxnfc *info)
+netvsc_get_rss_hash_opts(struct ethtool_rxnfc *info)
{
info->data = RXH_IP_SRC | RXH_IP_DST;
@@ -1267,7 +1266,7 @@ static void netvsc_get_strings(struct net_device *dev, u32 stringset, u8 *data)
return 0;
case ETHTOOL_GRXFH:
- return netvsc_get_rss_hash_opts(nvdev, info);
+ return netvsc_get_rss_hash_opts(info);
}
return -EOPNOTSUPP;
}
--
1.7.1
From: Haiyang Zhang <[email protected]>
The patch add the functions to switch UDP hash level between
L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set
differently. The default hash level is L4. We currently only
allow switching TX hash level from within the guests.
On Azure, fragmented UDP packets have high loss rate with L4
hashing. Using L3 hashing is recommended in this case.
For example, for UDP over IPv4 on eth0:
To include UDP port numbers in hasing:
ethtool -N eth0 rx-flow-hash udp4 sdfn
To exclude UDP port numbers in hasing:
ethtool -N eth0 rx-flow-hash udp4 sd
To show UDP hash level:
ethtool -n eth0 rx-flow-hash udp4
Signed-off-by: Haiyang Zhang <[email protected]>
---
drivers/net/hyperv/hyperv_net.h | 2 +
drivers/net/hyperv/netvsc_drv.c | 78 +++++++++++++++++++++++++++++++++++----
2 files changed, 72 insertions(+), 8 deletions(-)
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 9198dd1..ff1c0c8 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -720,6 +720,8 @@ struct net_device_context {
u32 tx_send_table[VRSS_SEND_TAB_SIZE];
/* Ethtool settings */
+ bool udp4_l4_hash;
+ bool udp6_l4_hash;
u8 duplex;
u32 speed;
struct netvsc_ethtool_stats eth_stats;
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index d8612b1..c0c4c91 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -190,10 +190,12 @@ static int netvsc_close(struct net_device *net)
return ppi;
}
-/* Azure hosts don't support non-TCP port numbers in hashing yet. We compute
- * hash for non-TCP traffic with only IP numbers.
+/* Azure hosts don't support non-TCP port numbers in hashing for fragmented
+ * packets. We can use ethtool to change UDP hash level when necessary.
*/
-static inline u32 netvsc_get_hash(struct sk_buff *skb)
+static inline u32 netvsc_get_hash(
+ struct sk_buff *skb,
+ const struct net_device_context *ndc)
{
struct flow_keys flow;
u32 hash;
@@ -204,7 +206,11 @@ static inline u32 netvsc_get_hash(struct sk_buff *skb)
if (!skb_flow_dissect_flow_keys(skb, &flow, 0))
return 0;
- if (flow.basic.ip_proto == IPPROTO_TCP) {
+ if (flow.basic.ip_proto == IPPROTO_TCP ||
+ (flow.basic.ip_proto == IPPROTO_UDP &&
+ ((flow.basic.n_proto == htons(ETH_P_IP) && ndc->udp4_l4_hash) ||
+ (flow.basic.n_proto == htons(ETH_P_IPV6) &&
+ ndc->udp6_l4_hash)))) {
return skb_get_hash(skb);
} else {
if (flow.basic.n_proto == htons(ETH_P_IP))
@@ -227,7 +233,7 @@ static inline int netvsc_get_tx_queue(struct net_device *ndev,
struct sock *sk = skb->sk;
int q_idx;
- q_idx = ndc->tx_send_table[netvsc_get_hash(skb) &
+ q_idx = ndc->tx_send_table[netvsc_get_hash(skb, ndc) &
(VRSS_SEND_TAB_SIZE - 1)];
/* If queue index changed record the new value */
@@ -891,6 +897,9 @@ static void netvsc_init_settings(struct net_device *dev)
{
struct net_device_context *ndc = netdev_priv(dev);
+ ndc->udp4_l4_hash = true;
+ ndc->udp6_l4_hash = true;
+
ndc->speed = SPEED_UNKNOWN;
ndc->duplex = DUPLEX_FULL;
}
@@ -1228,7 +1237,8 @@ static void netvsc_get_strings(struct net_device *dev, u32 stringset, u8 *data)
}
static int
-netvsc_get_rss_hash_opts(struct ethtool_rxnfc *info)
+netvsc_get_rss_hash_opts(struct net_device_context *ndc,
+ struct ethtool_rxnfc *info)
{
info->data = RXH_IP_SRC | RXH_IP_DST;
@@ -1236,9 +1246,20 @@ static void netvsc_get_strings(struct net_device *dev, u32 stringset, u8 *data)
case TCP_V4_FLOW:
case TCP_V6_FLOW:
info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
- /* fallthrough */
+ break;
+
case UDP_V4_FLOW:
+ if (ndc->udp4_l4_hash)
+ info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+
+ break;
+
case UDP_V6_FLOW:
+ if (ndc->udp6_l4_hash)
+ info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+
+ break;
+
case IPV4_FLOW:
case IPV6_FLOW:
break;
@@ -1266,11 +1287,51 @@ static void netvsc_get_strings(struct net_device *dev, u32 stringset, u8 *data)
return 0;
case ETHTOOL_GRXFH:
- return netvsc_get_rss_hash_opts(info);
+ return netvsc_get_rss_hash_opts(ndc, info);
}
return -EOPNOTSUPP;
}
+static int netvsc_set_rss_hash_opts(struct net_device_context *ndc,
+ struct ethtool_rxnfc *info)
+{
+ if (info->data == (RXH_IP_SRC | RXH_IP_DST |
+ RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ if (info->flow_type == UDP_V4_FLOW)
+ ndc->udp4_l4_hash = true;
+ else if (info->flow_type == UDP_V6_FLOW)
+ ndc->udp6_l4_hash = true;
+ else
+ return -EOPNOTSUPP;
+
+ return 0;
+ }
+
+ if (info->data == (RXH_IP_SRC | RXH_IP_DST)) {
+ if (info->flow_type == UDP_V4_FLOW)
+ ndc->udp4_l4_hash = false;
+ else if (info->flow_type == UDP_V6_FLOW)
+ ndc->udp6_l4_hash = false;
+ else
+ return -EOPNOTSUPP;
+
+ return 0;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int
+netvsc_set_rxnfc(struct net_device *ndev, struct ethtool_rxnfc *info)
+{
+ struct net_device_context *ndc = netdev_priv(ndev);
+
+ if (info->cmd == ETHTOOL_SRXFH)
+ return netvsc_set_rss_hash_opts(ndc, info);
+
+ return -EOPNOTSUPP;
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
static void netvsc_poll_controller(struct net_device *dev)
{
@@ -1469,6 +1530,7 @@ static int netvsc_set_ringparam(struct net_device *ndev,
.set_channels = netvsc_set_channels,
.get_ts_info = ethtool_op_get_ts_info,
.get_rxnfc = netvsc_get_rxnfc,
+ .set_rxnfc = netvsc_set_rxnfc,
.get_rxfh_key_size = netvsc_get_rxfh_key_size,
.get_rxfh_indir_size = netvsc_rss_indir_size,
.get_rxfh = netvsc_get_rxfh,
--
1.7.1
From: Haiyang Zhang <[email protected]>
Update Documentation/networking/netvsc.txt for UDP hash level setting
and related info.
Signed-off-by: Haiyang Zhang <[email protected]>
---
Documentation/networking/netvsc.txt | 22 +++++++++++++++++-----
1 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/Documentation/networking/netvsc.txt b/Documentation/networking/netvsc.txt
index 4ddb4e4..fa8d863 100644
--- a/Documentation/networking/netvsc.txt
+++ b/Documentation/networking/netvsc.txt
@@ -21,11 +21,23 @@ Features
--------------------
Hyper-V supports receive side scaling. For TCP, packets are
distributed among available queues based on IP address and port
- number. Current versions of Hyper-V host, only distribute UDP
- packets based on the IP source and destination address.
- The port number is not used as part of the hash value for UDP.
- Fragmented IP packets are not distributed between queues;
- all fragmented packets arrive on the first channel.
+ number.
+
+ For UDP, we can switch UDP hash level between L3 and L4 by ethtool
+ command. UDP over IPv4 and v6 can be set differently. The default
+ hash level is L4. We currently only allow switching TX hash level
+ from within the guests.
+
+ On Azure, fragmented UDP packets have high loss rate with L4
+ hashing. Using L3 hashing is recommended in this case.
+
+ For example, for UDP over IPv4 on eth0:
+ To include UDP port numbers in hasing:
+ ethtool -N eth0 rx-flow-hash udp4 sdfn
+ To exclude UDP port numbers in hasing:
+ ethtool -N eth0 rx-flow-hash udp4 sd
+ To show UDP hash level:
+ ethtool -n eth0 rx-flow-hash udp4
Generic Receive Offload, aka GRO
--------------------------------
--
1.7.1
All proper patch series must have a header "[PATCH xxx 0/N]" posting
which explains at a high level what the patch series does, how it does
it, and why it is doing it that way.
Therefore, please resubmit this patch series with a proper header
posting.
Thank you.