This series adds support for eeprom "size" property which will be read by the
driver for eeprom size. The existing ACPI has a different default size which
can be overridden with a DSD property value provided by the platform FW.
This series also adds support for runtime PM. The eeprom driver currently
did not have support for runtime PM and the device was kept in D0 throughout.
[v1]
- Add support for eeprom "size" property.
- Add runtime PM support to the driver.
[v2]
- Improved the patch subject.
[v3]
- Addressed comments from Sakari Ailus.
- Improved patch description.
- Improved pm support patch.
[v4]
- Improved runtime pm support.
- Addressed comments from Sakari Ailus.
[v5]
- Addressed comments from Sakari Ailus.
- Improved error handling for PM support.
Divagar Mohandass (3):
dt-bindings: add eeprom "size" property
eeprom: at24: add support to fetch eeprom device property "size"
eeprom: at24: enable runtime pm support
.../devicetree/bindings/eeprom/eeprom.txt | 2 +
drivers/misc/eeprom/at24.c | 44 ++++++++++++++++++++++
2 files changed, 46 insertions(+)
--
1.9.1
This adds eeprom "size" as optional property for i2c eeproms.
The "size" property allows explicitly specifying the size of the
EEPROM chip in bytes.
Signed-off-by: Divagar Mohandass <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/eeprom/eeprom.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt
index 5696eb5..1436569 100644
--- a/Documentation/devicetree/bindings/eeprom/eeprom.txt
+++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt
@@ -32,6 +32,8 @@ Optional properties:
- read-only: this parameterless property disables writes to the eeprom
+ - size: total eeprom size in bytes
+
Example:
eeprom@52 {
--
1.9.1
Obtain the size of the EEPROM chip from DT if the "size" property is
specified for the device.
Signed-off-by: Divagar Mohandass <[email protected]>
---
drivers/misc/eeprom/at24.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 764ff5df..2199c42 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -570,6 +570,10 @@ static void at24_get_pdata(struct device *dev, struct at24_platform_data *chip)
if (device_property_present(dev, "read-only"))
chip->flags |= AT24_FLAG_READONLY;
+ err = device_property_read_u32(dev, "size", &val);
+ if (!err)
+ chip->byte_len = val;
+
err = device_property_read_u32(dev, "pagesize", &val);
if (!err) {
chip->page_size = val;
--
1.9.1
Currently the device is kept in D0, there is an opportunity
to save power by enabling runtime pm.
Device can be daisy chained from PMIC and we can't rely on I2C core
for auto resume/suspend. Driver will decide when to resume/suspend.
Signed-off-by: Divagar Mohandass <[email protected]>
---
drivers/misc/eeprom/at24.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2199c42..03f5cb7 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -24,6 +24,7 @@
#include <linux/i2c.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_data/at24.h>
+#include <linux/pm_runtime.h>
/*
* I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
@@ -501,11 +502,21 @@ static ssize_t at24_eeprom_write_i2c(struct at24_data *at24, const char *buf,
static int at24_read(void *priv, unsigned int off, void *val, size_t count)
{
struct at24_data *at24 = priv;
+ struct i2c_client *client;
char *buf = val;
+ int ret;
if (unlikely(!count))
return count;
+ client = at24_translate_offset(at24, &off);
+
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ return ret;
+ }
+
/*
* Read data from chip, protecting against concurrent updates
* from this host, but not from other I2C masters.
@@ -518,6 +529,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
status = at24->read_func(at24, buf, off, count);
if (status < 0) {
mutex_unlock(&at24->lock);
+ pm_runtime_put(&client->dev);
return status;
}
buf += status;
@@ -527,17 +539,29 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
mutex_unlock(&at24->lock);
+ pm_runtime_put(&client->dev);
+
return 0;
}
static int at24_write(void *priv, unsigned int off, void *val, size_t count)
{
struct at24_data *at24 = priv;
+ struct i2c_client *client;
char *buf = val;
+ int ret;
if (unlikely(!count))
return -EINVAL;
+ client = at24_translate_offset(at24, &off);
+
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ return ret;
+ }
+
/*
* Write data to chip, protecting against concurrent updates
* from this host, but not from other I2C masters.
@@ -550,6 +574,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
status = at24->write_func(at24, buf, off, count);
if (status < 0) {
mutex_unlock(&at24->lock);
+ pm_runtime_put(&client->dev);
return status;
}
buf += status;
@@ -559,6 +584,8 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
mutex_unlock(&at24->lock);
+ pm_runtime_put(&client->dev);
+
return 0;
}
@@ -743,6 +770,11 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
i2c_set_clientdata(client, at24);
+ /* enable runtime pm */
+ pm_runtime_get_noresume(&client->dev);
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+
/*
* Perform a one-byte test read to verify that the
* chip is functional.
@@ -750,9 +782,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
err = at24_read(at24, 0, &test_byte, 1);
if (err) {
err = -ENODEV;
+ pm_runtime_put(&client->dev);
goto err_clients;
}
+ pm_runtime_put(&client->dev);
+
at24->nvmem_config.name = dev_name(&client->dev);
at24->nvmem_config.dev = &client->dev;
at24->nvmem_config.read_only = !writable;
@@ -795,6 +830,8 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (at24->client[i])
i2c_unregister_device(at24->client[i]);
+ pm_runtime_disable(&client->dev);
+
return err;
}
@@ -810,6 +847,9 @@ static int at24_remove(struct i2c_client *client)
for (i = 1; i < at24->num_addresses; i++)
i2c_unregister_device(at24->client[i]);
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
return 0;
}
--
1.9.1
Hi Divagar,
On Mon, Sep 04, 2017 at 12:10:45PM +0530, Divagar Mohandass wrote:
> Currently the device is kept in D0, there is an opportunity
> to save power by enabling runtime pm.
>
> Device can be daisy chained from PMIC and we can't rely on I2C core
> for auto resume/suspend. Driver will decide when to resume/suspend.
>
> Signed-off-by: Divagar Mohandass <[email protected]>
> ---
> drivers/misc/eeprom/at24.c | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> index 2199c42..03f5cb7 100644
> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c
> @@ -750,9 +782,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
> err = at24_read(at24, 0, &test_byte, 1);
You do pm_runtime_put()s here and drop the ones below as it's needed
unconditionally. Then I think we're done.
> if (err) {
> err = -ENODEV;
> + pm_runtime_put(&client->dev);
> goto err_clients;
> }
>
> + pm_runtime_put(&client->dev);
> +
> at24->nvmem_config.name = dev_name(&client->dev);
> at24->nvmem_config.dev = &client->dev;
> at24->nvmem_config.read_only = !writable;
--
Kind regards,
Sakari Ailus
e-mail: [email protected]
Hi Sakari,
Thanks, I will fix this and send the patch v6.
---
^Divagar
>-----Original Message-----
>From: Sakari Ailus [mailto:[email protected]]
>Sent: Monday, September 04, 2017 1:09 PM
>To: Mohandass, Divagar <[email protected]>
>Cc: [email protected]; [email protected]; [email protected];
>[email protected]; [email protected]; linux-
>[email protected]; Mani, Rajmohan <[email protected]>
>Subject: Re: [PATCH v5 3/3] eeprom: at24: enable runtime pm support
>
>Hi Divagar,
>
>On Mon, Sep 04, 2017 at 12:10:45PM +0530, Divagar Mohandass wrote:
>> Currently the device is kept in D0, there is an opportunity to save
>> power by enabling runtime pm.
>>
>> Device can be daisy chained from PMIC and we can't rely on I2C core
>> for auto resume/suspend. Driver will decide when to resume/suspend.
>>
>> Signed-off-by: Divagar Mohandass <[email protected]>
>> ---
>> drivers/misc/eeprom/at24.c | 40
>> ++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 40 insertions(+)
>>
>> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
>> index 2199c42..03f5cb7 100644
>> --- a/drivers/misc/eeprom/at24.c
>> +++ b/drivers/misc/eeprom/at24.c
>> @@ -750,9 +782,12 @@ static int at24_probe(struct i2c_client *client,
>const struct i2c_device_id *id)
>> err = at24_read(at24, 0, &test_byte, 1);
>
>You do pm_runtime_put()s here and drop the ones below as it's needed
>unconditionally. Then I think we're done.
>
>> if (err) {
>> err = -ENODEV;
>> + pm_runtime_put(&client->dev);
>> goto err_clients;
>> }
>>
>> + pm_runtime_put(&client->dev);
>> +
>> at24->nvmem_config.name = dev_name(&client->dev);
>> at24->nvmem_config.dev = &client->dev;
>> at24->nvmem_config.read_only = !writable;
>
>--
>Kind regards,
>
>Sakari Ailus
>e-mail: [email protected]