This patchset primarily adds Broadcom FlexRM reset module for
VFIO platform driver.
The patches are based on Linux-4.13-rc3 and can also be
found at flexrm-vfio-v8 branch of
https://github.com/Broadcom/arm64-linux.git
Changes since v7:
- Use "ret |= rc" instead of "ret = rc" in
vfio_platform_bcmflexrm_reset()
Changes since v6:
- Update the FlexRM ring flush sequence as suggested
by HW folks
- Shutdown all FlexRM ring anyway even if it fails on
any of the FlexRM rings
- Use dev_warn() instead of pr_warn()
Changes since v5:
- Make kconfig option VFIO_PLATFORM_BCMFLEXRM_RESET
default to ARCH_BCM_IPROC
Changes since v4:
- Use "--timeout" instead of "timeout--" in
vfio_platform_bcmflexrm_shutdown()
Changes since v3:
- Improve "depends on" for Kconfig option
VFIO_PLATFORM_BCMFLEXRM_RESET
- Fix typo in pr_warn() called by
vfio_platform_bcmflexrm_shutdown()
- Return error from vfio_platform_bcmflexrm_shutdown()
when FlexRM ring flush timeout happens
Changes since v2:
- Remove PATCH1 because fixing VFIO no-IOMMU mode is
a separate topic
Changes since v1:
- Remove iommu_present() check in vfio_iommu_group_get()
- Drop PATCH1-to-PATCH3 because IOMMU_CAP_BYPASS is not
required
- Move additional comments out of license header in
vfio_platform_bcmflexrm.c
Anup Patel (1):
vfio: platform: reset: Add Broadcom FlexRM reset module
drivers/vfio/platform/reset/Kconfig | 9 ++
drivers/vfio/platform/reset/Makefile | 1 +
.../vfio/platform/reset/vfio_platform_bcmflexrm.c | 115 +++++++++++++++++++++
3 files changed, 125 insertions(+)
create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
--
2.7.4
This patch adds Broadcom FlexRM low-level reset for
VFIO platform.
It will do the following:
1. Disable/Deactivate each FlexRM ring
2. Flush each FlexRM ring
The cleanup sequence for FlexRM rings is adapted from
Broadcom FlexRM mailbox driver.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Oza Oza <[email protected]>
Reviewed-by: Scott Branden <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
---
drivers/vfio/platform/reset/Kconfig | 9 ++
drivers/vfio/platform/reset/Makefile | 1 +
.../vfio/platform/reset/vfio_platform_bcmflexrm.c | 115 +++++++++++++++++++++
3 files changed, 125 insertions(+)
create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
index 70cccc5..392e3c0 100644
--- a/drivers/vfio/platform/reset/Kconfig
+++ b/drivers/vfio/platform/reset/Kconfig
@@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
Enables the VFIO platform driver to handle reset for AMD XGBE
If you don't know what to do here, say N.
+
+config VFIO_PLATFORM_BCMFLEXRM_RESET
+ tristate "VFIO support for Broadcom FlexRM reset"
+ depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)
+ default ARCH_BCM_IPROC
+ help
+ Enables the VFIO platform driver to handle reset for Broadcom FlexRM
+
+ If you don't know what to do here, say N.
diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
index 93f4e23..8d9874b 100644
--- a/drivers/vfio/platform/reset/Makefile
+++ b/drivers/vfio/platform/reset/Makefile
@@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
+obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
new file mode 100644
index 0000000..5a17d50
--- /dev/null
+++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver provides reset support for Broadcom FlexRM ring manager
+ * to VFIO platform.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "vfio_platform_private.h"
+
+/* FlexRM configuration */
+#define RING_REGS_SIZE 0x10000
+#define RING_VER_MAGIC 0x76303031
+
+/* Per-Ring register offsets */
+#define RING_VER 0x000
+#define RING_CONTROL 0x034
+#define RING_FLUSH_DONE 0x038
+
+/* Register RING_CONTROL fields */
+#define CONTROL_FLUSH_SHIFT 5
+
+/* Register RING_FLUSH_DONE fields */
+#define FLUSH_DONE_MASK 0x1
+
+static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
+{
+ unsigned int timeout;
+
+ /* Disable/inactivate ring */
+ writel_relaxed(0x0, ring + RING_CONTROL);
+
+ /* Set ring flush state */
+ timeout = 1000; /* timeout of 1s */
+ writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
+ do {
+ if (readl_relaxed(ring + RING_FLUSH_DONE) &
+ FLUSH_DONE_MASK)
+ break;
+ mdelay(1);
+ } while (--timeout);
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ /* Clear ring flush state */
+ timeout = 1000; /* timeout of 1s */
+ writel_relaxed(0x0, ring + RING_CONTROL);
+ do {
+ if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
+ FLUSH_DONE_MASK))
+ break;
+ mdelay(1);
+ } while (--timeout);
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
+{
+ void __iomem *ring;
+ int rc = 0, ret = 0, ring_num = 0;
+ struct vfio_platform_region *reg = &vdev->regions[0];
+
+ /* Map FlexRM ring registers if not mapped */
+ if (!reg->ioaddr) {
+ reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
+ if (!reg->ioaddr)
+ return -ENOMEM;
+ }
+
+ /* Discover and shutdown each FlexRM ring */
+ for (ring = reg->ioaddr;
+ ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
+ if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC) {
+ rc = vfio_platform_bcmflexrm_shutdown(ring);
+ if (rc) {
+ dev_warn(vdev->device,
+ "FlexRM ring%d shutdown error %d\n",
+ ring_num, rc);
+ ret |= rc;
+ }
+ }
+ }
+
+ return ret;
+}
+
+module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
+ vfio_platform_bcmflexrm_reset);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anup Patel <[email protected]>");
+MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
--
2.7.4
Hi Anup,
On 06/09/2017 13:18, Anup Patel wrote:
> This patch adds Broadcom FlexRM low-level reset for
> VFIO platform.
>
> It will do the following:
> 1. Disable/Deactivate each FlexRM ring
> 2. Flush each FlexRM ring
>
> The cleanup sequence for FlexRM rings is adapted from
> Broadcom FlexRM mailbox driver.
>
> Signed-off-by: Anup Patel <[email protected]>
> Reviewed-by: Oza Oza <[email protected]>
> Reviewed-by: Scott Branden <[email protected]>
> Reviewed-by: Eric Auger <[email protected]>
> ---
> drivers/vfio/platform/reset/Kconfig | 9 ++
> drivers/vfio/platform/reset/Makefile | 1 +
> .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 115 +++++++++++++++++++++
> 3 files changed, 125 insertions(+)
> create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 70cccc5..392e3c0 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
> Enables the VFIO platform driver to handle reset for AMD XGBE
>
> If you don't know what to do here, say N.
> +
> +config VFIO_PLATFORM_BCMFLEXRM_RESET
> + tristate "VFIO support for Broadcom FlexRM reset"
> + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)
> + default ARCH_BCM_IPROC
> + help
> + Enables the VFIO platform driver to handle reset for Broadcom FlexRM
> +
> + If you don't know what to do here, say N.
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 93f4e23..8d9874b 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>
> obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
> obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> new file mode 100644
> index 0000000..5a17d50
> --- /dev/null
> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> @@ -0,0 +1,115 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/*
> + * This driver provides reset support for Broadcom FlexRM ring manager
> + * to VFIO platform.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "vfio_platform_private.h"
> +
> +/* FlexRM configuration */
> +#define RING_REGS_SIZE 0x10000
> +#define RING_VER_MAGIC 0x76303031
> +
> +/* Per-Ring register offsets */
> +#define RING_VER 0x000
> +#define RING_CONTROL 0x034
> +#define RING_FLUSH_DONE 0x038
> +
> +/* Register RING_CONTROL fields */
> +#define CONTROL_FLUSH_SHIFT 5
> +
> +/* Register RING_FLUSH_DONE fields */
> +#define FLUSH_DONE_MASK 0x1
> +
> +static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
> +{
> + unsigned int timeout;
> +
> + /* Disable/inactivate ring */
> + writel_relaxed(0x0, ring + RING_CONTROL);
> +
> + /* Set ring flush state */
> + timeout = 1000; /* timeout of 1s */
> + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
> + do {
> + if (readl_relaxed(ring + RING_FLUSH_DONE) &
> + FLUSH_DONE_MASK)
> + break;
> + mdelay(1);
> + } while (--timeout);
> + if (!timeout)
> + return -ETIMEDOUT;
> +
> + /* Clear ring flush state */
> + timeout = 1000; /* timeout of 1s */
> + writel_relaxed(0x0, ring + RING_CONTROL);
> + do {
> + if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
> + FLUSH_DONE_MASK))
> + break;
> + mdelay(1);
> + } while (--timeout);
> + if (!timeout)
> + return -ETIMEDOUT;
As this sequence is not part of flexrm_shutdown() in
drivers/mailbox/bcm-flexrm-mailbox.c, do you plan to update the native
driver with that addition?
> +
> + return 0;
> +}
> +
> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
> +{
> + void __iomem *ring;
> + int rc = 0, ret = 0, ring_num = 0;
> + struct vfio_platform_region *reg = &vdev->regions[0];
> +
> + /* Map FlexRM ring registers if not mapped */
> + if (!reg->ioaddr) {
> + reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
> + if (!reg->ioaddr)
> + return -ENOMEM;
> + }
> +
> + /* Discover and shutdown each FlexRM ring */
> + for (ring = reg->ioaddr;
> + ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
> + if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC) {
> + rc = vfio_platform_bcmflexrm_shutdown(ring);
> + if (rc) {
> + dev_warn(vdev->device,
> + "FlexRM ring%d shutdown error %d\n",
> + ring_num, rc);
sorry but ring_num sticks to 0.
Thanks
Eric
> + ret |= rc;
> + }
> + }
> + }
> +
> + return ret;
> +}
> +
> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
> + vfio_platform_bcmflexrm_reset);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Anup Patel <[email protected]>");
> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
>
On Fri, Sep 8, 2017 at 9:28 PM, Auger Eric <[email protected]> wrote:
> Hi Anup,
>
> On 06/09/2017 13:18, Anup Patel wrote:
>> This patch adds Broadcom FlexRM low-level reset for
>> VFIO platform.
>>
>> It will do the following:
>> 1. Disable/Deactivate each FlexRM ring
>> 2. Flush each FlexRM ring
>>
>> The cleanup sequence for FlexRM rings is adapted from
>> Broadcom FlexRM mailbox driver.
>>
>> Signed-off-by: Anup Patel <[email protected]>
>> Reviewed-by: Oza Oza <[email protected]>
>> Reviewed-by: Scott Branden <[email protected]>
>> Reviewed-by: Eric Auger <[email protected]>
>> ---
>> drivers/vfio/platform/reset/Kconfig | 9 ++
>> drivers/vfio/platform/reset/Makefile | 1 +
>> .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 115 +++++++++++++++++++++
>> 3 files changed, 125 insertions(+)
>> create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>>
>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
>> index 70cccc5..392e3c0 100644
>> --- a/drivers/vfio/platform/reset/Kconfig
>> +++ b/drivers/vfio/platform/reset/Kconfig
>> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>> Enables the VFIO platform driver to handle reset for AMD XGBE
>>
>> If you don't know what to do here, say N.
>> +
>> +config VFIO_PLATFORM_BCMFLEXRM_RESET
>> + tristate "VFIO support for Broadcom FlexRM reset"
>> + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)
>> + default ARCH_BCM_IPROC
>> + help
>> + Enables the VFIO platform driver to handle reset for Broadcom FlexRM
>> +
>> + If you don't know what to do here, say N.
>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
>> index 93f4e23..8d9874b 100644
>> --- a/drivers/vfio/platform/reset/Makefile
>> +++ b/drivers/vfio/platform/reset/Makefile
>> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>>
>> obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>> obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
>> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
>> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> new file mode 100644
>> index 0000000..5a17d50
>> --- /dev/null
>> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> @@ -0,0 +1,115 @@
>> +/*
>> + * Copyright (C) 2017 Broadcom
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +/*
>> + * This driver provides reset support for Broadcom FlexRM ring manager
>> + * to VFIO platform.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +
>> +#include "vfio_platform_private.h"
>> +
>> +/* FlexRM configuration */
>> +#define RING_REGS_SIZE 0x10000
>> +#define RING_VER_MAGIC 0x76303031
>> +
>> +/* Per-Ring register offsets */
>> +#define RING_VER 0x000
>> +#define RING_CONTROL 0x034
>> +#define RING_FLUSH_DONE 0x038
>> +
>> +/* Register RING_CONTROL fields */
>> +#define CONTROL_FLUSH_SHIFT 5
>> +
>> +/* Register RING_FLUSH_DONE fields */
>> +#define FLUSH_DONE_MASK 0x1
>> +
>> +static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
>> +{
>> + unsigned int timeout;
>> +
>> + /* Disable/inactivate ring */
>> + writel_relaxed(0x0, ring + RING_CONTROL);
>> +
>> + /* Set ring flush state */
>> + timeout = 1000; /* timeout of 1s */
>> + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
>> + do {
>> + if (readl_relaxed(ring + RING_FLUSH_DONE) &
>> + FLUSH_DONE_MASK)
>> + break;
>> + mdelay(1);
>> + } while (--timeout);
>> + if (!timeout)
>> + return -ETIMEDOUT;
>> +
>> + /* Clear ring flush state */
>> + timeout = 1000; /* timeout of 1s */
>> + writel_relaxed(0x0, ring + RING_CONTROL);
>> + do {
>> + if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
>> + FLUSH_DONE_MASK))
>> + break;
>> + mdelay(1);
>> + } while (--timeout);
>> + if (!timeout)
>> + return -ETIMEDOUT;
> As this sequence is not part of flexrm_shutdown() in
> drivers/mailbox/bcm-flexrm-mailbox.c, do you plan to update the native
> driver with that addition?
Yes, we have to send fix for bcm-flexrm-mailbox.c which should
also be taken by Linux stable tree.
>
>> +
>> + return 0;
>> +}
>> +
>> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
>> +{
>> + void __iomem *ring;
>> + int rc = 0, ret = 0, ring_num = 0;
>> + struct vfio_platform_region *reg = &vdev->regions[0];
>> +
>> + /* Map FlexRM ring registers if not mapped */
>> + if (!reg->ioaddr) {
>> + reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
>> + if (!reg->ioaddr)
>> + return -ENOMEM;
>> + }
>> +
>> + /* Discover and shutdown each FlexRM ring */
>> + for (ring = reg->ioaddr;
>> + ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
>> + if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC) {
>> + rc = vfio_platform_bcmflexrm_shutdown(ring);
>> + if (rc) {
>> + dev_warn(vdev->device,
>> + "FlexRM ring%d shutdown error %d\n",
>> + ring_num, rc);
> sorry but ring_num sticks to 0.
Ahh, good catch.
Thanks,
Anup