2017-09-22 08:07:53

by 冯锐

[permalink] [raw]
Subject: [PATCH] mmc: rtsx: fix tuning fail on gen3 PCI-Express

From: rui_feng <[email protected]>

On gen3 PCI-Express we should send command one by one.
If sending many commands in one packet will lead to a failure.

Signed-off-by: rui_feng <[email protected]>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 38 ++++++++++++++++++--------------------
include/linux/mfd/rtsx_pci.h | 1 +
2 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 41b5771..0848dc0 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -618,29 +618,22 @@ static int sd_change_phase(struct realtek_pci_sdmmc *host,
u8 sample_point, bool rx)
{
struct rtsx_pcr *pcr = host->pcr;
- int err;

dev_dbg(sdmmc_dev(host), "%s(%s): sample_point = %d\n",
__func__, rx ? "RX" : "TX", sample_point);

- rtsx_pci_init_cmd(pcr);
-
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
+ rtsx_pci_write_register(pcr, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
if (rx)
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
- SD_VPRX_CTL, 0x1F, sample_point);
+ rtsx_pci_write_register(pcr, SD_VPRX_CTL,
+ PHASE_SELECT_MASK, sample_point);
else
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
- SD_VPTX_CTL, 0x1F, sample_point);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
- PHASE_NOT_RESET, PHASE_NOT_RESET);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, 0);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
-
- err = rtsx_pci_send_cmd(pcr, 100);
- if (err < 0)
- return err;
+ rtsx_pci_write_register(pcr, SD_VPTX_CTL,
+ PHASE_SELECT_MASK, sample_point);
+ rtsx_pci_write_register(pcr, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
+ rtsx_pci_write_register(pcr, SD_VPCLK0_CTL, PHASE_NOT_RESET,
+ PHASE_NOT_RESET);
+ rtsx_pci_write_register(pcr, CLK_CTL, CHANGE_CLK, 0);
+ rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);

return 0;
}
@@ -708,10 +701,12 @@ static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
{
int err;
struct mmc_command cmd = {};
+ struct rtsx_pcr *pcr = host->pcr;

- err = sd_change_phase(host, sample_point, true);
- if (err < 0)
- return err;
+ sd_change_phase(host, sample_point, true);
+
+ rtsx_pci_write_register(pcr, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN,
+ SD_RSP_80CLK_TIMEOUT_EN);

cmd.opcode = opcode;
err = sd_read_data(host, &cmd, 0x40, NULL, 0, 100);
@@ -719,9 +714,12 @@ static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
/* Wait till SD DATA IDLE */
sd_wait_data_idle(host);
sd_clear_error(host);
+ rtsx_pci_write_register(pcr, SD_CFG3,
+ SD_RSP_80CLK_TIMEOUT_EN, 0);
return err;
}

+ rtsx_pci_write_register(pcr, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, 0);
return 0;
}

diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index a40abaa..84a5dde 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -334,6 +334,7 @@
#define DCM_DRP_RD_DATA_H 0xFC29
#define SD_VPCLK0_CTL 0xFC2A
#define SD_VPCLK1_CTL 0xFC2B
+#define PHASE_SELECT_MASK 0x1F
#define SD_DCMPS0_CTL 0xFC2C
#define SD_DCMPS1_CTL 0xFC2D
#define SD_VPTX_CTL SD_VPCLK0_CTL
--
1.9.1


2017-09-26 22:24:46

by Ulf Hansson

[permalink] [raw]
Subject: Re: [PATCH] mmc: rtsx: fix tuning fail on gen3 PCI-Express

On 22 September 2017 at 10:07, <[email protected]> wrote:
> From: rui_feng <[email protected]>
>
> On gen3 PCI-Express we should send command one by one.
> If sending many commands in one packet will lead to a failure.
>
> Signed-off-by: rui_feng <[email protected]>

Thanks, applied for next!

Kind regards
Uffe

> ---
> drivers/mmc/host/rtsx_pci_sdmmc.c | 38 ++++++++++++++++++--------------------
> include/linux/mfd/rtsx_pci.h | 1 +
> 2 files changed, 19 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index 41b5771..0848dc0 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -618,29 +618,22 @@ static int sd_change_phase(struct realtek_pci_sdmmc *host,
> u8 sample_point, bool rx)
> {
> struct rtsx_pcr *pcr = host->pcr;
> - int err;
>
> dev_dbg(sdmmc_dev(host), "%s(%s): sample_point = %d\n",
> __func__, rx ? "RX" : "TX", sample_point);
>
> - rtsx_pci_init_cmd(pcr);
> -
> - rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
> + rtsx_pci_write_register(pcr, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
> if (rx)
> - rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
> - SD_VPRX_CTL, 0x1F, sample_point);
> + rtsx_pci_write_register(pcr, SD_VPRX_CTL,
> + PHASE_SELECT_MASK, sample_point);
> else
> - rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
> - SD_VPTX_CTL, 0x1F, sample_point);
> - rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
> - rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
> - PHASE_NOT_RESET, PHASE_NOT_RESET);
> - rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, 0);
> - rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
> -
> - err = rtsx_pci_send_cmd(pcr, 100);
> - if (err < 0)
> - return err;
> + rtsx_pci_write_register(pcr, SD_VPTX_CTL,
> + PHASE_SELECT_MASK, sample_point);
> + rtsx_pci_write_register(pcr, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
> + rtsx_pci_write_register(pcr, SD_VPCLK0_CTL, PHASE_NOT_RESET,
> + PHASE_NOT_RESET);
> + rtsx_pci_write_register(pcr, CLK_CTL, CHANGE_CLK, 0);
> + rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
>
> return 0;
> }
> @@ -708,10 +701,12 @@ static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
> {
> int err;
> struct mmc_command cmd = {};
> + struct rtsx_pcr *pcr = host->pcr;
>
> - err = sd_change_phase(host, sample_point, true);
> - if (err < 0)
> - return err;
> + sd_change_phase(host, sample_point, true);
> +
> + rtsx_pci_write_register(pcr, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN,
> + SD_RSP_80CLK_TIMEOUT_EN);
>
> cmd.opcode = opcode;
> err = sd_read_data(host, &cmd, 0x40, NULL, 0, 100);
> @@ -719,9 +714,12 @@ static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
> /* Wait till SD DATA IDLE */
> sd_wait_data_idle(host);
> sd_clear_error(host);
> + rtsx_pci_write_register(pcr, SD_CFG3,
> + SD_RSP_80CLK_TIMEOUT_EN, 0);
> return err;
> }
>
> + rtsx_pci_write_register(pcr, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, 0);
> return 0;
> }
>
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index a40abaa..84a5dde 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -334,6 +334,7 @@
> #define DCM_DRP_RD_DATA_H 0xFC29
> #define SD_VPCLK0_CTL 0xFC2A
> #define SD_VPCLK1_CTL 0xFC2B
> +#define PHASE_SELECT_MASK 0x1F
> #define SD_DCMPS0_CTL 0xFC2C
> #define SD_DCMPS1_CTL 0xFC2D
> #define SD_VPTX_CTL SD_VPCLK0_CTL
> --
> 1.9.1
>