On sun7i-a20-* there's no way to enable PA00--PA27 as RGB888 LCD0 pins.
Add lcd_rgb888_pins in sun7i-a20.dtsi.
It can be used on sun7i-a20-olinuxino-lime.dts.
This patch gives possibility to set parallel lcd pins for RGB888.
To be used with tcon0 in your <target>.dts
Best regards
Giulio Benetti
Micronova srl
Signed-off-by: Giulio Benetti <[email protected]>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 228c368..b85a917 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -921,6 +921,14 @@
pins = "PI20", "PI21";
function = "uart7";
};
+
+ lcd_rgb888_pins: lcd-rgb888 {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+ "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+ "PD16", "PD17", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
+ };
};
timer@1c20c00 {
--
2.7.4
From 1583410394491028620@xxx Tue Nov 07 12:30:25 +0000 2017
X-GM-THRID: 1583407502718416155
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread