devm_gpiod_get_optional() can return an error in addition to a NULL ptr.
Check for error and propagate that to the probe function. Check return
value in probe. This will now handle EPROBE_DEFER for the reset gpio.
Signed-off-by: Phil Reid <[email protected]>
---
drivers/net/dsa/lan9303-core.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index cc00308..b63173c 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -820,15 +820,18 @@ static int lan9303_register_switch(struct lan9303 *chip)
return dsa_register_switch(chip->ds);
}
-static void lan9303_probe_reset_gpio(struct lan9303 *chip,
+static int lan9303_probe_reset_gpio(struct lan9303 *chip,
struct device_node *np)
{
chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset",
GPIOD_OUT_LOW);
+ if (IS_ERR(chip->reset_gpio))
+ return PTR_ERR(chip->reset_gpio);
+
if (!chip->reset_gpio) {
dev_dbg(chip->dev, "No reset GPIO defined\n");
- return;
+ return 0;
}
chip->reset_duration = 200;
@@ -843,6 +846,8 @@ static void lan9303_probe_reset_gpio(struct lan9303 *chip,
/* A sane reset duration should not be longer than 1s */
if (chip->reset_duration > 1000)
chip->reset_duration = 1000;
+
+ return 0;
}
int lan9303_probe(struct lan9303 *chip, struct device_node *np)
@@ -851,7 +856,9 @@ int lan9303_probe(struct lan9303 *chip, struct device_node *np)
mutex_init(&chip->indirect_mutex);
- lan9303_probe_reset_gpio(chip, np);
+ ret = lan9303_probe_reset_gpio(chip, np);
+ if (ret)
+ return ret;
lan9303_handle_reset(chip);
--
1.8.3.1
From 1583937553417041728@xxx Mon Nov 13 08:09:23 +0000 2017
X-GM-THRID: 1583937553417041728
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread