Update compatible string and clock names for QMP version V3
USB PHY.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Manu Gautam <[email protected]>
---
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index b6a9f2b..dcf1b8f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -8,7 +8,8 @@ Required properties:
- compatible: compatible list, contains:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
- "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
+ "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+ "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
- reg: offset and length of register set for PHY's common serdes block.
@@ -25,10 +26,13 @@ Required properties:
- clock-names: "cfg_ahb" for phy config clock,
"aux" for phy aux clock,
"ref" for 19.2 MHz ref clk,
+ "com_aux" for phy common block aux clock,
For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
+ For "qcom,qmp-v3-usb3-phy" must contain:
+ "aux", "cfg_ahb", "ref", "com_aux".
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
From 1584169996334562558@xxx Wed Nov 15 21:43:58 +0000 2017
X-GM-THRID: 1584169996334562558
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread