Hi Namhyung,
Sorry for the delayed response - was out on vacation..
On Thu, 2017-11-23 at 14:09 +0900, Namhyung Kim wrote:
> On Fri, Nov 17, 2017 at 02:33:06PM -0600, Tom Zanussi wrote:
> > Add an 'onmax(var).save(field,...)' hist trigger action which is
> > invoked whenever an event exceeds the current maximum.
> >
> > The end result is that the trace event fields or variables specified
> > as the onmax.save() params will be saved if 'var' exceeds the current
> > maximum for that hist trigger entry. This allows context from the
> > event that exhibited the new maximum to be saved for later reference.
> > When the histogram is displayed, additional fields displaying the
> > saved values will be printed.
> >
> > As an example the below defines a couple of hist triggers, one for
> > sched_wakeup and another for sched_switch, keyed on pid. Whenever a
> > sched_wakeup occurs, the timestamp is saved in the entry corresponding
> > to the current pid, and when the scheduler switches back to that pid,
> > the timestamp difference is calculated. If the resulting latency
> > exceeds the current maximum latency, the specified save() values are
> > saved:
> >
> > # echo 'hist:keys=pid:ts0=$common_timestamp.usecs \
> > if comm=="cyclictest"' >> \
> > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
> >
> > # echo 'hist:keys=next_pid:\
> > wakeup_lat=$common_timestamp.usecs-$ts0:\
> > onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) \
> > if next_comm=="cyclictest"' >> \
> > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> >
> > When the histogram is displayed, the max value and the saved values
> > corresponding to the max are displayed following the rest of the
> > fields:
> >
> > # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
> >
> > { next_pid: 3728 } hitcount: 199 \
> > max: 123 next_comm: cyclictest prev_pid: 0 \
> > prev_prio: 120 prev_comm: swapper/3
> > { next_pid: 3730 } hitcount: 1321 \
> > max: 15 next_comm: cyclictest prev_pid: 0 \
> > prev_prio: 120 prev_comm: swapper/1
> > { next_pid: 3729 } hitcount: 1973\
> > max: 25 next_comm: cyclictest prev_pid: 0 \
> > prev_prio: 120 prev_comm: swapper/0
> >
> > Totals:
> > Hits: 3493
> > Entries: 3
> > Dropped: 0
> >
> > Signed-off-by: Tom Zanussi <[email protected]>
> > ---
>
> [SNIP]
> > +static int onmax_create(struct hist_trigger_data *hist_data,
> > + struct action_data *data)
> > +{
> > + struct trace_event_call *call = hist_data->event_file->event_call;
> > + struct trace_event_file *file = hist_data->event_file;
> > + struct hist_field *var_field, *ref_field, *max_var;
> > + unsigned int var_ref_idx = hist_data->n_var_refs;
> > + struct field_var *field_var;
> > + char *onmax_var_str, *param;
> > + const char *event_name;
> > + unsigned long flags;
> > + unsigned int i;
> > + int ret = 0;
> > +
> > + onmax_var_str = data->onmax.var_str;
> > + if (onmax_var_str[0] != '$')
> > + return -EINVAL;
> > + onmax_var_str++;
> > +
> > + event_name = trace_event_name(call);
>
> It seems not used.
>
>
> > + var_field = find_target_event_var(hist_data, NULL, NULL, onmax_var_str);
> > + if (!var_field)
> > + return -EINVAL;
> > +
> > + flags = HIST_FIELD_FL_VAR_REF;
> > + ref_field = create_hist_field(hist_data, NULL, flags, NULL);
> > + if (!ref_field)
> > + return -ENOMEM;
> > +
> > + if (init_var_ref(ref_field, var_field, NULL, NULL)) {
> > + destroy_hist_field(ref_field, 0);
> > + ret = -ENOMEM;
> > + goto out;
> > + }
> > + hist_data->var_refs[hist_data->n_var_refs] = ref_field;
> > + ref_field->var_ref_idx = hist_data->n_var_refs++;
> > + data->onmax.var = ref_field;
>
> I was confused that this could create a reference to self-variable
> which would prevent a hist from being freed. IIUC it tries to avoid
> such a self reference by using local field variable and disallowing
> variable of expression, right?
>
> But it seems that's not the case since the reference is saved in other
> place than hist_data->fields which is used in find_var_ref().
>
The onmax processing only allows a variable defined on the target to be
used in the onmax(), so yes it can only be a 'self' variable defined on
the same trigger. But that variable can reference variables in an
expression e.g. where ts0 is a variable on another trigger:
wakeup_lat=$common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(...)
The reference to $ts0 prevents that other trigger from going away, just
as a further event referencing $wakeup_lat would prevent the onmax()
trigger from going away - both of these cases are covered by the
find_var_ref() code.
But if the only trigger that accesses the $wakeup_lat is the onmax()
trigger itself, then it's ok to free that trigger.
Hope that answers your question about this..
Thanks,
Tom
>
> > +
> > + data->fn = onmax_save;
> > + data->onmax.max_var_ref_idx = var_ref_idx;
> > + max_var = create_var(hist_data, file, "max", sizeof(u64), "u64");
> > + if (IS_ERR(max_var)) {
> > + ret = PTR_ERR(max_var);
> > + goto out;
> > + }
> > + data->onmax.max_var = max_var;
> > +
> > + for (i = 0; i < data->n_params; i++) {
> > + param = kstrdup(data->params[i], GFP_KERNEL);
> > + if (!param) {
> > + ret = -ENOMEM;
> > + goto out;
> > + }
> > +
> > + field_var = create_target_field_var(hist_data, NULL, NULL, param);
> > + if (IS_ERR(field_var)) {
> > + ret = PTR_ERR(field_var);
> > + kfree(param);
> > + goto out;
> > + }
> > +
> > + hist_data->max_vars[hist_data->n_max_vars++] = field_var;
> > + if (field_var->val->flags & HIST_FIELD_FL_STRING)
> > + hist_data->n_max_var_str++;
> > +
> > + kfree(param);
> > + }
> > + out:
> > + return ret;
> > +}
> > +
>
> [SNIP]
> > +static struct action_data *onmax_parse(char *str)
> > +{
> > + char *onmax_fn_name, *onmax_var_str;
> > + struct action_data *data;
> > + int ret = -EINVAL;
> > +
> > + data = kzalloc(sizeof(*data), GFP_KERNEL);
> > + if (!data)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + onmax_var_str = strsep(&str, ")");
> > + if (!onmax_var_str || !str)
> > + return ERR_PTR(-EINVAL);
>
> 'data' leaked.
>
> Thanks,
> Namhyung
>
>
> > + data->onmax.var_str = kstrdup(onmax_var_str, GFP_KERNEL);
> > + if (!data->onmax.var_str) {
> > + ret = -ENOMEM;
> > + goto free;
> > + }
> > +
> > + strsep(&str, ".");
> > + if (!str)
> > + goto free;
> > +
> > + onmax_fn_name = strsep(&str, "(");
> > + if (!onmax_fn_name || !str)
> > + goto free;
> > +
> > + if (strncmp(onmax_fn_name, "save", strlen("save")) == 0) {
> > + char *params = strsep(&str, ")");
> > +
> > + if (!params) {
> > + ret = -EINVAL;
> > + goto free;
> > + }
> > +
> > + ret = parse_action_params(params, data);
> > + if (ret)
> > + goto free;
> > + } else
> > + goto free;
> > +
> > + data->onmax.fn_name = kstrdup(onmax_fn_name, GFP_KERNEL);
> > + if (!data->onmax.fn_name) {
> > + ret = -ENOMEM;
> > + goto free;
> > + }
> > + out:
> > + return data;
> > + free:
> > + onmax_destroy(data);
> > + data = ERR_PTR(ret);
> > + goto out;
> > +}
From 1584832232935074274@xxx Thu Nov 23 05:09:56 +0000 2017
X-GM-THRID: 1584401103895282352
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread