Enable RTL8723BS WiFi chip on a64-olinuxino board:
- WiFi SDIO interface is connected to MMC1
- WiFi REG_ON pin connected to gpio PL2: attach to mmc-pwrseq
- WiFi HOST_WAKE pin connected to gpio PL3
Signed-off-by: Jagan Teki <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
---
Changes for v2:
- Remove wrong commit message
.../boot/dts/allwinner/sun50i-a64-olinuxino.dts | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 338e7861..8807664 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -57,6 +57,11 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
};
&mmc0 {
@@ -70,6 +75,24 @@
status = "okay";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_aldo2>;
+ vqmmc-supply = <®_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8723bs: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+ interrupt-names = "host-wake";
+ };
+};
+
&r_rsb {
status = "okay";
--
2.7.4
Since current tree support AXP803 regulators,
replace fixed regulator vcc3v3 with AXP803 dcdc1 regulator where ever
it need to replace.
Tested mmc0 on sopine baseboard.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v2:
- Commit message edited as fix since it has issue with sdcard detect.
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 11 +----------
2 files changed, 2 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index a053a6a..abe179d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -96,7 +96,7 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <®_vcc3v3>;
+ vmmc-supply = <®_dcdc1>;
vqmmc-supply = <®_vcc1v8>;
bus-width = <8>;
non-removable;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index a5da18a..43418bd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -45,19 +45,10 @@
#include "sun50i-a64.dtsi"
-/ {
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_vcc3v3>;
+ vmmc-supply = <®_dcdc1>;
non-removable;
disable-wp;
bus-width = <4>;
--
2.7.4
On Mon, Dec 04, 2017 at 10:23:07AM +0530, Jagan Teki wrote:
> Since current tree support AXP803 regulators,
> replace fixed regulator vcc3v3 with AXP803 dcdc1 regulator where ever
> it need to replace.
>
> Tested mmc0 on sopine baseboard.
>
> Signed-off-by: Jagan Teki <[email protected]>
Queued as a fix, thanks
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
On Mon, Dec 04, 2017 at 10:23:06AM +0530, Jagan Teki wrote:
> Enable RTL8723BS WiFi chip on a64-olinuxino board:
> - WiFi SDIO interface is connected to MMC1
> - WiFi REG_ON pin connected to gpio PL2: attach to mmc-pwrseq
> - WiFi HOST_WAKE pin connected to gpio PL3
>
> Signed-off-by: Jagan Teki <[email protected]>
> Acked-by: Maxime Ripard <[email protected]>
Applied, thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com