2017-12-05 08:17:01

by Rasmus Villemoes

Subject: [PATCH resend] arm: dts: ls1021a: Add label to USB controllers

From: Esben Haabendal <[email protected]>

Add usb2 and usb3 labels to USB2 and USB3 controller device tree nodes,
for easier modification in board dts files.

Signed-off-by: Esben Haabendal <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
---
arch/arm/boot/dts/ls1021a.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 3ff2b8a9f01a..02a266faec9b 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -675,7 +675,7 @@
};
};

- usb@8600000 {
+ usb2: usb@8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
reg = <0x0 0x8600000 0x0 0x1000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -683,7 +683,7 @@
phy_type = "ulpi";
};

- usb3@3100000 {
+ usb3: usb3@3100000 {
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
--
2.7.4

2017-12-21 08:06:45

by Shawn Guo

Subject: Re: [PATCH resend] arm: dts: ls1021a: Add label to USB controllers

On Tue, Dec 05, 2017 at 09:16:33AM +0100, Rasmus Villemoes wrote:
> From: Esben Haabendal <[email protected]>
>
> Add usb2 and usb3 labels to USB2 and USB3 controller device tree nodes,
> for easier modification in board dts files.
>
> Signed-off-by: Esben Haabendal <[email protected]>
> Signed-off-by: Rasmus Villemoes <[email protected]>

Fixed prefix and applied the patch.

Shawn