It's not correct to return NULL when that is actually an error and
function returns errors in any other wrong case. In the same time,
the cpsw driver and davinci emac doesn't check error case while
creating channel and it can miss actual error. Also remove WARNs
duplicated dev_err msgs.
Signed-off-by: Ivan Khoronzhuk <[email protected]>
---
drivers/net/ethernet/ti/cpsw.c | 12 +++++++++---
drivers/net/ethernet/ti/davinci_cpdma.c | 2 +-
drivers/net/ethernet/ti/davinci_emac.c | 9 +++++++--
3 files changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index a60a378..3c85a08 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -3065,10 +3065,16 @@ static int cpsw_probe(struct platform_device *pdev)
}
cpsw->txv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0);
+ if (IS_ERR(cpsw->txv[0].ch)) {
+ dev_err(priv->dev, "error initializing tx dma channel\n");
+ ret = PTR_ERR(cpsw->txv[0].ch);
+ goto clean_dma_ret;
+ }
+
cpsw->rxv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_rx_handler, 1);
- if (WARN_ON(!cpsw->rxv[0].ch || !cpsw->txv[0].ch)) {
- dev_err(priv->dev, "error initializing dma channels\n");
- ret = -ENOMEM;
+ if (IS_ERR(cpsw->rxv[0].ch)) {
+ dev_err(priv->dev, "error initializing rx dma channel\n");
+ ret = PTR_ERR(cpsw->rxv[0].ch);
goto clean_dma_ret;
}
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index e4d6edf..6f9173f 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -893,7 +893,7 @@ struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num,
chan_num = rx_type ? rx_chan_num(chan_num) : tx_chan_num(chan_num);
if (__chan_linear(chan_num) >= ctlr->num_chan)
- return NULL;
+ return ERR_PTR(-EINVAL);
chan = devm_kzalloc(ctlr->dev, sizeof(*chan), GFP_KERNEL);
if (!chan)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index f58c0c6..3d4af64 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1870,10 +1870,15 @@ static int davinci_emac_probe(struct platform_device *pdev)
priv->txchan = cpdma_chan_create(priv->dma, EMAC_DEF_TX_CH,
emac_tx_handler, 0);
+ if (WARN_ON(IS_ERR(priv->txchan))) {
+ rc = PTR_ERR(priv->txchan);
+ goto no_cpdma_chan;
+ }
+
priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH,
emac_rx_handler, 1);
- if (WARN_ON(!priv->txchan || !priv->rxchan)) {
- rc = -ENOMEM;
+ if (WARN_ON(IS_ERR(priv->rxchan))) {
+ rc = PTR_ERR(priv->rxchan);
goto no_cpdma_chan;
}
--
2.7.4
On 12/12/2017 10:35 AM, Ivan Khoronzhuk wrote:
> It's not correct to return NULL when that is actually an error and
> function returns errors in any other wrong case. In the same time,
> the cpsw driver and davinci emac doesn't check error case while
> creating channel and it can miss actual error. Also remove WARNs
> duplicated dev_err msgs.
>
> Signed-off-by: Ivan Khoronzhuk <[email protected]>
> ---
> drivers/net/ethernet/ti/cpsw.c | 12 +++++++++---
> drivers/net/ethernet/ti/davinci_cpdma.c | 2 +-
> drivers/net/ethernet/ti/davinci_emac.c | 9 +++++++--
> 3 files changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index a60a378..3c85a08 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -3065,10 +3065,16 @@ static int cpsw_probe(struct platform_device *pdev)
> }
>
> cpsw->txv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0);
> + if (IS_ERR(cpsw->txv[0].ch)) {
> + dev_err(priv->dev, "error initializing tx dma channel\n");
> + ret = PTR_ERR(cpsw->txv[0].ch);
> + goto clean_dma_ret;
> + }
> +
> cpsw->rxv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_rx_handler, 1);
> - if (WARN_ON(!cpsw->rxv[0].ch || !cpsw->txv[0].ch)) {
> - dev_err(priv->dev, "error initializing dma channels\n");
> - ret = -ENOMEM;
> + if (IS_ERR(cpsw->rxv[0].ch)) {
> + dev_err(priv->dev, "error initializing rx dma channel\n");
> + ret = PTR_ERR(cpsw->rxv[0].ch);
> goto clean_dma_ret;
> }
>
> diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
> index e4d6edf..6f9173f 100644
> --- a/drivers/net/ethernet/ti/davinci_cpdma.c
> +++ b/drivers/net/ethernet/ti/davinci_cpdma.c
> @@ -893,7 +893,7 @@ struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num,
> chan_num = rx_type ? rx_chan_num(chan_num) : tx_chan_num(chan_num);
>
> if (__chan_linear(chan_num) >= ctlr->num_chan)
> - return NULL;
> + return ERR_PTR(-EINVAL);
>
> chan = devm_kzalloc(ctlr->dev, sizeof(*chan), GFP_KERNEL);
> if (!chan)
> diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
> index f58c0c6..3d4af64 100644
> --- a/drivers/net/ethernet/ti/davinci_emac.c
> +++ b/drivers/net/ethernet/ti/davinci_emac.c
> @@ -1870,10 +1870,15 @@ static int davinci_emac_probe(struct platform_device *pdev)
>
> priv->txchan = cpdma_chan_create(priv->dma, EMAC_DEF_TX_CH,
> emac_tx_handler, 0);
> + if (WARN_ON(IS_ERR(priv->txchan))) {
So, logically WARN_ON() should be removed in davinci_emac.c also. Right?
> + rc = PTR_ERR(priv->txchan);
> + goto no_cpdma_chan;
> + }
> +
> priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH,
> emac_rx_handler, 1);
> - if (WARN_ON(!priv->txchan || !priv->rxchan)) {
> - rc = -ENOMEM;
> + if (WARN_ON(IS_ERR(priv->rxchan))) {
> + rc = PTR_ERR(priv->rxchan);
> goto no_cpdma_chan;
> }
>
>
--
regards,
-grygorii
On Tue, Dec 12, 2017 at 11:08:51AM -0600, Grygorii Strashko wrote:
>
>
> On 12/12/2017 10:35 AM, Ivan Khoronzhuk wrote:
> > It's not correct to return NULL when that is actually an error and
> > function returns errors in any other wrong case. In the same time,
> > the cpsw driver and davinci emac doesn't check error case while
> > creating channel and it can miss actual error. Also remove WARNs
> > duplicated dev_err msgs.
> >
> > Signed-off-by: Ivan Khoronzhuk <[email protected]>
> > ---
> > drivers/net/ethernet/ti/cpsw.c | 12 +++++++++---
> > drivers/net/ethernet/ti/davinci_cpdma.c | 2 +-
> > drivers/net/ethernet/ti/davinci_emac.c | 9 +++++++--
> > 3 files changed, 17 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> > index a60a378..3c85a08 100644
> > --- a/drivers/net/ethernet/ti/cpsw.c
> > +++ b/drivers/net/ethernet/ti/cpsw.c
> > @@ -3065,10 +3065,16 @@ static int cpsw_probe(struct platform_device *pdev)
> > }
> >
> > cpsw->txv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0);
> > + if (IS_ERR(cpsw->txv[0].ch)) {
> > + dev_err(priv->dev, "error initializing tx dma channel\n");
> > + ret = PTR_ERR(cpsw->txv[0].ch);
> > + goto clean_dma_ret;
> > + }
> > +
> > cpsw->rxv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_rx_handler, 1);
> > - if (WARN_ON(!cpsw->rxv[0].ch || !cpsw->txv[0].ch)) {
> > - dev_err(priv->dev, "error initializing dma channels\n");
> > - ret = -ENOMEM;
> > + if (IS_ERR(cpsw->rxv[0].ch)) {
> > + dev_err(priv->dev, "error initializing rx dma channel\n");
> > + ret = PTR_ERR(cpsw->rxv[0].ch);
> > goto clean_dma_ret;
> > }
> >
> > diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
> > index e4d6edf..6f9173f 100644
> > --- a/drivers/net/ethernet/ti/davinci_cpdma.c
> > +++ b/drivers/net/ethernet/ti/davinci_cpdma.c
> > @@ -893,7 +893,7 @@ struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num,
> > chan_num = rx_type ? rx_chan_num(chan_num) : tx_chan_num(chan_num);
> >
> > if (__chan_linear(chan_num) >= ctlr->num_chan)
> > - return NULL;
> > + return ERR_PTR(-EINVAL);
> >
> > chan = devm_kzalloc(ctlr->dev, sizeof(*chan), GFP_KERNEL);
> > if (!chan)
> > diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
> > index f58c0c6..3d4af64 100644
> > --- a/drivers/net/ethernet/ti/davinci_emac.c
> > +++ b/drivers/net/ethernet/ti/davinci_emac.c
> > @@ -1870,10 +1870,15 @@ static int davinci_emac_probe(struct platform_device *pdev)
> >
> > priv->txchan = cpdma_chan_create(priv->dma, EMAC_DEF_TX_CH,
> > emac_tx_handler, 0);
> > + if (WARN_ON(IS_ERR(priv->txchan))) {
>
> So, logically WARN_ON() should be removed in davinci_emac.c also. Right?
It doesn't have dev_err() duplicate, so not very.
But would be better to replace them on dev_err() if no objection.
>
> > + rc = PTR_ERR(priv->txchan);
> > + goto no_cpdma_chan;
> > + }
> > +
> > priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH,
> > emac_rx_handler, 1);
> > - if (WARN_ON(!priv->txchan || !priv->rxchan)) {
> > - rc = -ENOMEM;
> > + if (WARN_ON(IS_ERR(priv->rxchan))) {
> > + rc = PTR_ERR(priv->rxchan);
> > goto no_cpdma_chan;
> > }
> >
> >
>
> --
> regards,
> -grygorii
--
Regards,
Ivan Khoronzhuk
On 12/12/2017 11:50 AM, Ivan Khoronzhuk wrote:
> On Tue, Dec 12, 2017 at 11:08:51AM -0600, Grygorii Strashko wrote:
>>
>>
>> On 12/12/2017 10:35 AM, Ivan Khoronzhuk wrote:
>>> It's not correct to return NULL when that is actually an error and
>>> function returns errors in any other wrong case. In the same time,
>>> the cpsw driver and davinci emac doesn't check error case while
>>> creating channel and it can miss actual error. Also remove WARNs
>>> duplicated dev_err msgs.
>>>
>>> Signed-off-by: Ivan Khoronzhuk <[email protected]>
>>> ---
>>> drivers/net/ethernet/ti/cpsw.c | 12 +++++++++---
>>> drivers/net/ethernet/ti/davinci_cpdma.c | 2 +-
>>> drivers/net/ethernet/ti/davinci_emac.c | 9 +++++++--
>>> 3 files changed, 17 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
>>> index a60a378..3c85a08 100644
>>> --- a/drivers/net/ethernet/ti/cpsw.c
>>> +++ b/drivers/net/ethernet/ti/cpsw.c
>>> @@ -3065,10 +3065,16 @@ static int cpsw_probe(struct platform_device *pdev)
>>> }
>>>
>>> cpsw->txv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0);
>>> + if (IS_ERR(cpsw->txv[0].ch)) {
>>> + dev_err(priv->dev, "error initializing tx dma channel\n");
>>> + ret = PTR_ERR(cpsw->txv[0].ch);
>>> + goto clean_dma_ret;
>>> + }
>>> +
>>> cpsw->rxv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_rx_handler, 1);
>>> - if (WARN_ON(!cpsw->rxv[0].ch || !cpsw->txv[0].ch)) {
>>> - dev_err(priv->dev, "error initializing dma channels\n");
>>> - ret = -ENOMEM;
>>> + if (IS_ERR(cpsw->rxv[0].ch)) {
>>> + dev_err(priv->dev, "error initializing rx dma channel\n");
>>> + ret = PTR_ERR(cpsw->rxv[0].ch);
>>> goto clean_dma_ret;
>>> }
>>>
>>> diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
>>> index e4d6edf..6f9173f 100644
>>> --- a/drivers/net/ethernet/ti/davinci_cpdma.c
>>> +++ b/drivers/net/ethernet/ti/davinci_cpdma.c
>>> @@ -893,7 +893,7 @@ struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num,
>>> chan_num = rx_type ? rx_chan_num(chan_num) : tx_chan_num(chan_num);
>>>
>>> if (__chan_linear(chan_num) >= ctlr->num_chan)
>>> - return NULL;
>>> + return ERR_PTR(-EINVAL);
>>>
>>> chan = devm_kzalloc(ctlr->dev, sizeof(*chan), GFP_KERNEL);
>>> if (!chan)
>>> diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
>>> index f58c0c6..3d4af64 100644
>>> --- a/drivers/net/ethernet/ti/davinci_emac.c
>>> +++ b/drivers/net/ethernet/ti/davinci_emac.c
>>> @@ -1870,10 +1870,15 @@ static int davinci_emac_probe(struct platform_device *pdev)
>>>
>>> priv->txchan = cpdma_chan_create(priv->dma, EMAC_DEF_TX_CH,
>>> emac_tx_handler, 0);
>>> + if (WARN_ON(IS_ERR(priv->txchan))) {
>>
>> So, logically WARN_ON() should be removed in davinci_emac.c also. Right?
> It doesn't have dev_err() duplicate, so not very.
> But would be better to replace them on dev_err() if no objection.
>
right.
>
>>
>>> + rc = PTR_ERR(priv->txchan);
>>> + goto no_cpdma_chan;
>>> + }
>>> +
>>> priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH,
>>> emac_rx_handler, 1);
>>> - if (WARN_ON(!priv->txchan || !priv->rxchan)) {
>>> - rc = -ENOMEM;
>>> + if (WARN_ON(IS_ERR(priv->rxchan))) {
>>> + rc = PTR_ERR(priv->rxchan);
>>> goto no_cpdma_chan;
>>> }
--
regards,
-grygorii