2017-12-20 18:19:50

by Corentin LABBE

[permalink] [raw]
Subject: [PATCH] crypto: stm32 - Use standard CONFIG name

All hardware crypto devices have their CONFIG names using the following
convention:
CRYPTO_DEV_name_algo

This patch apply this conventions on STM32 CONFIG names.

Signed-off-by: Corentin Labbe <[email protected]>
---
drivers/crypto/stm32/Kconfig | 6 +++---
drivers/crypto/stm32/Makefile | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig
index 61ef00b6bf45..63aa78c0b12b 100644
--- a/drivers/crypto/stm32/Kconfig
+++ b/drivers/crypto/stm32/Kconfig
@@ -1,4 +1,4 @@
-config CRC_DEV_STM32
+config CRYPTO_DEV_STM32_CRC
tristate "Support for STM32 crc accelerators"
depends on ARCH_STM32
select CRYPTO_HASH
@@ -6,7 +6,7 @@ config CRC_DEV_STM32
This enables support for the CRC32 hw accelerator which can be found
on STMicroelectronics STM32 SOC.

-config HASH_DEV_STM32
+config CRYPTO_DEV_STM32_HASH
tristate "Support for STM32 hash accelerators"
depends on ARCH_STM32
depends on HAS_DMA
@@ -19,7 +19,7 @@ config HASH_DEV_STM32
This enables support for the HASH hw accelerator which can be found
on STMicroelectronics STM32 SOC.

-config CRYP_DEV_STM32
+config CRYPTO_DEV_STM32_CRYP
tristate "Support for STM32 cryp accelerators"
depends on ARCH_STM32
select CRYPTO_HASH
diff --git a/drivers/crypto/stm32/Makefile b/drivers/crypto/stm32/Makefile
index 2c19fc155bfd..53d1bb94b221 100644
--- a/drivers/crypto/stm32/Makefile
+++ b/drivers/crypto/stm32/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_CRC_DEV_STM32) += stm32_crc32.o
-obj-$(CONFIG_HASH_DEV_STM32) += stm32-hash.o
-obj-$(CONFIG_CRYP_DEV_STM32) += stm32-cryp.o
+obj-$(CONFIG_CRYPTO_DEV_STM32_CRC) += stm32_crc32.o
+obj-$(CONFIG_CRYPTO_DEV_STM32_HASH) += stm32-hash.o
+obj-$(CONFIG_CRYPTO_DEV_STM32_CRYP) += stm32-cryp.o
--
2.13.6


2017-12-22 08:18:26

by Fabien DESSENNE

[permalink] [raw]
Subject: Re: [PATCH] crypto: stm32 - Use standard CONFIG name

Hi Corentin


Thank you for the patch.


On 20/12/17 19:19, Corentin Labbe wrote:
> All hardware crypto devices have their CONFIG names using the following
> convention:
> CRYPTO_DEV_name_algo
>
> This patch apply this conventions on STM32 CONFIG names.
>
> Signed-off-by: Corentin Labbe <[email protected]>
Reviewed-by: Fabien Dessenne <[email protected]>
> ---
> drivers/crypto/stm32/Kconfig | 6 +++---
> drivers/crypto/stm32/Makefile | 6 +++---
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig
> index 61ef00b6bf45..63aa78c0b12b 100644
> --- a/drivers/crypto/stm32/Kconfig
> +++ b/drivers/crypto/stm32/Kconfig
> @@ -1,4 +1,4 @@
> -config CRC_DEV_STM32
> +config CRYPTO_DEV_STM32_CRC
> tristate "Support for STM32 crc accelerators"
> depends on ARCH_STM32
> select CRYPTO_HASH
> @@ -6,7 +6,7 @@ config CRC_DEV_STM32
> This enables support for the CRC32 hw accelerator which can be found
> on STMicroelectronics STM32 SOC.
>
> -config HASH_DEV_STM32
> +config CRYPTO_DEV_STM32_HASH
> tristate "Support for STM32 hash accelerators"
> depends on ARCH_STM32
> depends on HAS_DMA
> @@ -19,7 +19,7 @@ config HASH_DEV_STM32
> This enables support for the HASH hw accelerator which can be found
> on STMicroelectronics STM32 SOC.
>
> -config CRYP_DEV_STM32
> +config CRYPTO_DEV_STM32_CRYP
> tristate "Support for STM32 cryp accelerators"
> depends on ARCH_STM32
> select CRYPTO_HASH
> diff --git a/drivers/crypto/stm32/Makefile b/drivers/crypto/stm32/Makefile
> index 2c19fc155bfd..53d1bb94b221 100644
> --- a/drivers/crypto/stm32/Makefile
> +++ b/drivers/crypto/stm32/Makefile
> @@ -1,3 +1,3 @@
> -obj-$(CONFIG_CRC_DEV_STM32) += stm32_crc32.o
> -obj-$(CONFIG_HASH_DEV_STM32) += stm32-hash.o
> -obj-$(CONFIG_CRYP_DEV_STM32) += stm32-cryp.o
> +obj-$(CONFIG_CRYPTO_DEV_STM32_CRC) += stm32_crc32.o
> +obj-$(CONFIG_CRYPTO_DEV_STM32_HASH) += stm32-hash.o
> +obj-$(CONFIG_CRYPTO_DEV_STM32_CRYP) += stm32-cryp.o

2017-12-28 07:08:42

by Herbert Xu

[permalink] [raw]
Subject: Re: [PATCH] crypto: stm32 - Use standard CONFIG name

On Wed, Dec 20, 2017 at 06:19:32PM +0000, Corentin Labbe wrote:
> All hardware crypto devices have their CONFIG names using the following
> convention:
> CRYPTO_DEV_name_algo
>
> This patch apply this conventions on STM32 CONFIG names.
>
> Signed-off-by: Corentin Labbe <[email protected]>

Patch applied. Thanks.
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt