From: Ludovic Barre <[email protected]>
This patch series extends the existing STM32 microcontrollers (MCUs)
family to microprocessors (MPUs). The MPU platform (based on
Arm Cortex-A) is a continuation of the MCU one (based on Arm
Cortex-M) in that it shares a wide number of hardware blocks.
change v3:
-Remove bootargs
-Remove armv7m_restart and Share stm32_compat for mcu/mpu
-Modify stm32 kconfig with Arnd template
-Remove patch below (Linus W: Patch applied)
devicetree: bindings: Document supported STM32 SoC family
pinctrl: stm32: Add STM32MP157 MPU support
change V2:
-Add stm32 documentation in this serie to avoid merge conflict
thread: "https://patchwork.kernel.org/patch/10102573/"
-Split bindings (stm32.txt) to separate patches.
-Remove ARCH_STM32_MCU/MPU flags
-Adopt rst format for Documentation/arm/stm32 files
-s/STMicrolectronics/STMicroelectronics/g
Ludovic Barre (7):
Documentation: arm: stm32: move to rst format
ARM: stm32: prepare stm32 family to welcome armv7 architecture
dt-bindings: stm32: add support of STM32MP157
ARM: stm32: add initial support for STM32MP157
ARM: configs: multi_v7: add stm32 support
ARM: dts: stm32: add stm32mp157c initial support
ARM: dts: stm32: add initial support of stm32mp157c eval board
Documentation/arm/stm32/overview.rst | 34 +++++
Documentation/arm/stm32/overview.txt | 33 -----
Documentation/arm/stm32/stm32f429-overview.rst | 26 ++++
Documentation/arm/stm32/stm32f429-overview.txt | 22 ---
Documentation/arm/stm32/stm32f746-overview.rst | 33 +++++
Documentation/arm/stm32/stm32f746-overview.txt | 34 -----
Documentation/arm/stm32/stm32h743-overview.rst | 34 +++++
Documentation/arm/stm32/stm32h743-overview.txt | 30 ----
Documentation/arm/stm32/stm32mp157-overview.rst | 19 +++
Documentation/devicetree/bindings/arm/stm32.txt | 1 +
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 28 ++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 18 +++
arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++++++++++++++++++
arch/arm/configs/multi_v7_defconfig | 3 +
arch/arm/mach-stm32/Kconfig | 38 +++--
arch/arm/mach-stm32/board-dt.c | 5 +-
18 files changed, 552 insertions(+), 136 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.rst
delete mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/arm/stm32/stm32f746-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32f746-overview.txt
create mode 100644 Documentation/arm/stm32/stm32h743-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32h743-overview.txt
create mode 100644 Documentation/arm/stm32/stm32mp157-overview.rst
create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
--
2.7.4
From: Ludovic Barre <[email protected]>
This patch adds stm32 support to multi_v7_defconfig
Signed-off-by: Ludovic Barre <[email protected]>
---
arch/arm/configs/multi_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 11e648a..a0163e7 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -77,6 +77,7 @@ CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
+CONFIG_ARCH_STM32=y
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_RENESAS=y
@@ -324,6 +325,8 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_ST=y
--
2.7.4
From: Ludovic Barre <[email protected]>
This patch rewrites stm32 documentation to rst
(ReStructuredText) format.
Signed-off-by: Ludovic Barre <[email protected]>
---
Documentation/arm/stm32/overview.rst | 31 +++++++++++++++++++++++
Documentation/arm/stm32/overview.txt | 33 -------------------------
Documentation/arm/stm32/stm32f429-overview.rst | 26 ++++++++++++++++++++
Documentation/arm/stm32/stm32f429-overview.txt | 22 -----------------
Documentation/arm/stm32/stm32f746-overview.rst | 33 +++++++++++++++++++++++++
Documentation/arm/stm32/stm32f746-overview.txt | 34 --------------------------
Documentation/arm/stm32/stm32h743-overview.rst | 34 ++++++++++++++++++++++++++
Documentation/arm/stm32/stm32h743-overview.txt | 30 -----------------------
8 files changed, 124 insertions(+), 119 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.rst
delete mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/arm/stm32/stm32f746-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32f746-overview.txt
create mode 100644 Documentation/arm/stm32/stm32h743-overview.rst
delete mode 100644 Documentation/arm/stm32/stm32h743-overview.txt
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
new file mode 100644
index 0000000..6be6059
--- /dev/null
+++ b/Documentation/arm/stm32/overview.rst
@@ -0,0 +1,31 @@
+========================
+STM32 ARM Linux Overview
+========================
+
+Introduction
+------------
+
+The STMicroelectronics family of Cortex-M based MCUs are supported by the
+'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
+and STM32F746 (Cortex-M7) are supported.
+
+Configuration
+-------------
+
+A generic configuration is provided for STM32 family, and can be used as the
+default by
+ make stm32_defconfig
+
+Layout
+------
+
+All the files for multiple machine families are located in the platform code
+contained in arch/arm/mach-stm32
+
+There is a generic board board-dt.c in the mach folder which support
+Flattened Device Tree, which means, it works with any compatible board with
+Device Trees.
+
+:Authors:
+
+Maxime Coquelin <[email protected]>
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
deleted file mode 100644
index a03b035..0000000
--- a/Documentation/arm/stm32/overview.txt
+++ /dev/null
@@ -1,33 +0,0 @@
- STM32 ARM Linux Overview
- ========================
-
-Introduction
-------------
-
- The STMicroelectronics family of Cortex-M based MCUs are supported by the
- 'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
- and STM32F746 (Cortex-M7) are supported.
-
-
-Configuration
--------------
-
- A generic configuration is provided for STM32 family, and can be used as the
- default by
- make stm32_defconfig
-
-Layout
-------
-
- All the files for multiple machine families are located in the platform code
- contained in arch/arm/mach-stm32
-
- There is a generic board board-dt.c in the mach folder which support
- Flattened Device Tree, which means, it works with any compatible board with
- Device Trees.
-
-
-Document Author
----------------
-
- Maxime Coquelin <[email protected]>
diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst
new file mode 100644
index 0000000..18feda9
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f429-overview.rst
@@ -0,0 +1,26 @@
+STM32F429 Overview
+==================
+
+Introduction
+------------
+
+The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+It features:
+
+- ARM Cortex-M4 up to 180MHz with FPU
+- 2MB internal Flash Memory
+- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+- LCD controller & Camera interface
+- Cryptographic processor
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F429_).
+
+.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+:Authors:
+
+Maxime Coquelin <[email protected]>
diff --git a/Documentation/arm/stm32/stm32f429-overview.txt b/Documentation/arm/stm32/stm32f429-overview.txt
deleted file mode 100644
index 5206822..0000000
--- a/Documentation/arm/stm32/stm32f429-overview.txt
+++ /dev/null
@@ -1,22 +0,0 @@
- STM32F429 Overview
- ==================
-
- Introduction
- ------------
- The STM32F429 is a Cortex-M4 MCU aimed at various applications.
- It features:
- - ARM Cortex-M4 up to 180MHz with FPU
- - 2MB internal Flash Memory
- - External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
- - I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
- - LCD controller & Camera interface
- - Cryptographic processor
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
-
- Document Author
- ---------------
- Maxime Coquelin <[email protected]>
diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst
new file mode 100644
index 0000000..b5f4b6c
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f746-overview.rst
@@ -0,0 +1,33 @@
+STM32F746 Overview
+==================
+
+Introduction
+------------
+
+The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F746_).
+
+.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+:Authors:
+
+Alexandre Torgue <[email protected]>
diff --git a/Documentation/arm/stm32/stm32f746-overview.txt b/Documentation/arm/stm32/stm32f746-overview.txt
deleted file mode 100644
index cffd2b1c..0000000
--- a/Documentation/arm/stm32/stm32f746-overview.txt
+++ /dev/null
@@ -1,34 +0,0 @@
- STM32F746 Overview
- ==================
-
- Introduction
- ------------
- The STM32F746 is a Cortex-M7 MCU aimed at various applications.
- It features:
- - Cortex-M7 core running up to @216MHz
- - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
- - FMC controller to connect SDRAM, NOR and NAND memories
- - Dual mode QSPI
- - SD/MMC/SDIO support
- - Ethernet controller
- - USB OTFG FS & HS controllers
- - I2C, SPI, CAN busses support
- - Several 16 & 32 bits general purpose timers
- - Serial Audio interface
- - LCD controller
- - HDMI-CEC
- - SPDIFRX
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
-
- Document Author
- ---------------
- Alexandre Torgue <[email protected]>
-
-
-
-
-
diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst
new file mode 100644
index 0000000..3458dc0
--- /dev/null
+++ b/Documentation/arm/stm32/stm32h743-overview.rst
@@ -0,0 +1,34 @@
+STM32H743 Overview
+==================
+
+Introduction
+------------
+
+The STM32H743 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @400MHz
+- 2MB internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H743_).
+
+.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
+
+:Authors:
+
+Alexandre Torgue <[email protected]>
diff --git a/Documentation/arm/stm32/stm32h743-overview.txt b/Documentation/arm/stm32/stm32h743-overview.txt
deleted file mode 100644
index 3031cba..0000000
--- a/Documentation/arm/stm32/stm32h743-overview.txt
+++ /dev/null
@@ -1,30 +0,0 @@
- STM32H743 Overview
- ==================
-
- Introduction
- ------------
- The STM32H743 is a Cortex-M7 MCU aimed at various applications.
- It features:
- - Cortex-M7 core running up to @400MHz
- - 2MB internal flash, 1MBytes internal RAM
- - FMC controller to connect SDRAM, NOR and NAND memories
- - Dual mode QSPI
- - SD/MMC/SDIO support
- - Ethernet controller
- - USB OTFG FS & HS controllers
- - I2C, SPI, CAN busses support
- - Several 16 & 32 bits general purpose timers
- - Serial Audio interface
- - LCD controller
- - HDMI-CEC
- - SPDIFRX
- - DFSDM
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
-
- Document Author
- ---------------
- Alexandre Torgue <[email protected]>
--
2.7.4
From: Ludovic Barre <[email protected]>
This patch adds STM32MP157 SoC bindings.
Signed-off-by: Ludovic Barre <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/arm/stm32.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
index 05762b0..6808ed9 100644
--- a/Documentation/devicetree/bindings/arm/stm32.txt
+++ b/Documentation/devicetree/bindings/arm/stm32.txt
@@ -7,3 +7,4 @@ using one of the following compatible strings:
st,stm32f469
st,stm32f746
st,stm32h743
+ st,stm32mp157
--
2.7.4
From: Ludovic Barre <[email protected]>
Add stm32mp157c initial support with:
-Dual Cortex-A7
-Arm psci, timer, gic
-Pinctrl
-Uart
Signed-off-by: Ludovic Barre <[email protected]>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 172 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++++++++++++++++++++++++
2 files changed, 311 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
new file mode 100644
index 0000000..440276a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOA";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOB";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOC";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOD";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOE";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOF";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOG";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOH";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOI";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOJ";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOK";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
+
+ pinctrl_z: pin-controller-z {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ status = "disabled";
+
+ gpioz: gpio@54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&clk_pll2_p>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
new file mode 100644
index 0000000..93dbcac
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ aliases {
+ gpio0 = &gpioa;
+ gpio1 = &gpiob;
+ gpio2 = &gpioc;
+ gpio3 = &gpiod;
+ gpio4 = &gpioe;
+ gpio5 = &gpiof;
+ gpio6 = &gpiog;
+ gpio7 = &gpioh;
+ gpio8 = &gpioi;
+ gpio9 = &gpioj;
+ gpio10 = &gpiok;
+ serial3 = &uart4;
+ };
+
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_pll_per: clk-pll-per {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+
+ clk_pclk1: clk-pclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <86000000>;
+ };
+
+ clk_pll3_p: clk-pll3_p {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <172000000>;
+ };
+
+ clk_pll2_p: clk-pll2_p {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <264000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+ };
+};
--
2.7.4
From: Ludovic Barre <[email protected]>
Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1)
split in 2 elements:
-Daughter board (part number: STM32MP157C-ED1)
which includes CPU, memory and power supply
-Mother board (part number: STM32MP157C-EM1)
which includes external peripherals (like display, camera,...)
and extension connectors.
The daughter board can run alone, this is why the device tree files
are split in two layers, for the complete evaluation board (ev1)
and for the daughter board alone (ed1).
Signed-off-by: Ludovic Barre <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
---
arch/arm/boot/dts/Makefile | 6 ++++--
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 13 +++++++++++++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 28 ++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 18 ++++++++++++++++++
4 files changed, 63 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..d72c71c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -839,7 +839,7 @@ dtb-$(CONFIG_ARCH_STI) += \
stih410-b2120.dtb \
stih410-b2260.dtb \
stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= \
+dtb-$(CONFIG_ARCH_STM32) += \
stm32f429-disco.dtb \
stm32f469-disco.dtb \
stm32f746-disco.dtb \
@@ -847,7 +847,9 @@ dtb-$(CONFIG_ARCH_STM32)+= \
stm32429i-eval.dtb \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
- stm32h743i-disco.dtb
+ stm32h743i-disco.dtb \
+ stm32mp157c-ed1.dtb \
+ stm32mp157c-ev1.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 440276a..7ac65f4 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -145,6 +145,19 @@
ngpios = <8>;
gpio-ranges = <&pinctrl 0 160 8>;
};
+
+ uart4_pins_a: uart4@0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
};
pinctrl_z: pin-controller-z {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
new file mode 100644
index 0000000..78ccdd3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter";
+ compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory {
+ reg = <0xC0000000 0x40000000>;
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
new file mode 100644
index 0000000..42e1769b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
+ compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+};
+
--
2.7.4
From: Ludovic Barre <[email protected]>
This patch adds initial support of STM32MP157 microprocessor (MPU)
based on Arm Cortex-A7. New Cortex-A infrastructure (gic, timer,...)
are selected if ARCH_MULTI_V7 is defined.
Signed-off-by: Ludovic Barre <[email protected]>
---
Documentation/arm/stm32/stm32mp157-overview.rst | 19 +++++++++++++++++++
arch/arm/mach-stm32/Kconfig | 11 +++++++++++
arch/arm/mach-stm32/board-dt.c | 1 +
3 files changed, 31 insertions(+)
create mode 100644 Documentation/arm/stm32/stm32mp157-overview.rst
diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arm/stm32/stm32mp157-overview.rst
new file mode 100644
index 0000000..62e176d
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp157-overview.rst
@@ -0,0 +1,19 @@
+STM32MP157 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP157 is a Cortex-A MPU aimed at various applications.
+It features:
+
+- Dual core Cortex-A7 application core
+- 2D/3D image composition with GPU
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+:Authors:
+
+- Ludovic Barre <[email protected]>
+- Gerald Baeza <[email protected]>
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index fb4b8b8..6b65df1 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,6 +1,9 @@
menuconfig ARCH_STM32
bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
+ select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
+ select ARM_GIC if ARCH_MULTI_V7
+ select ARM_PSCI if ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select CLKSRC_STM32
select PINCTRL
@@ -31,4 +34,12 @@ config MACH_STM32H743
endif # ARMv7-M
+if ARCH_MULTI_V7
+
+config MACH_STM32MP157
+ bool "STMicroelectronics STM32MP157"
+ default y
+
+endif # ARMv7-A
+
endif
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index 4a258eb..d4e58ea 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -12,6 +12,7 @@ static const char *const stm32_compat[] __initconst = {
"st,stm32f469",
"st,stm32f746",
"st,stm32h743",
+ "st,stm32mp157",
NULL
};
--
2.7.4
From: Ludovic Barre <[email protected]>
This patch prepares the STM32 machine for the integration of Cortex-A
based microprocessor (MPU), on top of the existing Cortex-M
microcontroller family (MCU). Since both MCUs and MPUs are sharing
common hardware blocks we can keep using ARCH_STM32 flag for most of
them. If a hardware block is specific to one family we can use either
ARM_SINGLE_ARMV7M or ARCH_MULTI_V7 flag.
Signed-off-by: Ludovic Barre <[email protected]>
---
Documentation/arm/stm32/overview.rst | 15 +++++++++------
arch/arm/mach-stm32/Kconfig | 27 +++++++++++++++------------
arch/arm/mach-stm32/board-dt.c | 4 +---
3 files changed, 25 insertions(+), 21 deletions(-)
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
index 6be6059..85cfc84 100644
--- a/Documentation/arm/stm32/overview.rst
+++ b/Documentation/arm/stm32/overview.rst
@@ -5,16 +5,17 @@ STM32 ARM Linux Overview
Introduction
------------
-The STMicroelectronics family of Cortex-M based MCUs are supported by the
-'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
-and STM32F746 (Cortex-M7) are supported.
+The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
+Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
+ARM Linux.
Configuration
-------------
-A generic configuration is provided for STM32 family, and can be used as the
-default by
+For MCUs, use the provided default configuration:
make stm32_defconfig
+For MPUs, use multi_v7 configuration:
+ make multi_v7_defconfig
Layout
------
@@ -28,4 +29,6 @@ Device Trees.
:Authors:
-Maxime Coquelin <[email protected]>
+- Maxime Coquelin <[email protected]>
+- Ludovic Barre <[email protected]>
+- Gerald Baeza <[email protected]>
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 0d1889b..fb4b8b8 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,8 +1,7 @@
-config ARCH_STM32
- bool "STMicrolectronics STM32"
- depends on ARM_SINGLE_ARMV7M
+menuconfig ARCH_STM32
+ bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
+ select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
select ARCH_HAS_RESET_CONTROLLER
- select ARMV7M_SYSTICK
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
@@ -10,22 +9,26 @@ config ARCH_STM32
help
Support for STMicroelectronics STM32 processors.
+if ARCH_STM32
+
+if ARM_SINGLE_ARMV7M
+
config MACH_STM32F429
- bool "STMicrolectronics STM32F429"
- depends on ARCH_STM32
+ bool "STMicroelectronics STM32F429"
default y
config MACH_STM32F469
- bool "STMicrolectronics STM32F469"
- depends on ARCH_STM32
+ bool "STMicroelectronics STM32F469"
default y
config MACH_STM32F746
- bool "STMicrolectronics STM32F746"
- depends on ARCH_STM32
+ bool "STMicroelectronics STM32F746"
default y
config MACH_STM32H743
- bool "STMicrolectronics STM32H743"
- depends on ARCH_STM32
+ bool "STMicroelectronics STM32H743"
default y
+
+endif # ARMv7-M
+
+endif
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index e918686..4a258eb 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) Maxime Coquelin 2015
* Author: Maxime Coquelin <[email protected]>
- * License terms: GNU General Public License (GPL), version 2
*/
#include <linux/kernel.h>
-#include <asm/v7m.h>
#include <asm/mach/arch.h>
static const char *const stm32_compat[] __initconst = {
@@ -18,5 +17,4 @@ static const char *const stm32_compat[] __initconst = {
DT_MACHINE_START(STM32DT, "STM32 (Device Tree Support)")
.dt_compat = stm32_compat,
- .restart = armv7m_restart,
MACHINE_END
--
2.7.4