Series adda LVDS panel attributes on panel drivers instead of defining
them in dts nodes, and also added new icorem6 engicam boards.
Jagan Teki (7):
drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H
ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple
ARM: dts: imx6dl-icore: Add LVDS node
drm/panel: simple: Add support for KEO TX31D200VM0BAA
ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 7
initial support
ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit
support
.../display/panel/ampire,am-800480aytzqw-00h.txt | 25 +++++++++
.../bindings/display/panel/koe,tx31d200vm0baa.txt | 25 +++++++++
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6dl-icore.dts | 28 ++++++++++
arch/arm/boot/dts/imx6q-icore-mipi.dts | 25 +++++++++
arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 31 ++++++-----
arch/arm/boot/dts/imx6q-icore-ofcap7.dts | 65 ++++++++++++++++++++++
arch/arm/boot/dts/imx6q-icore.dts | 31 ++++++-----
arch/arm/boot/dts/imx6qdl-icore.dtsi | 25 ++++++++-
drivers/gpu/drm/panel/panel-simple.c | 54 ++++++++++++++++++
10 files changed, 282 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
create mode 100644 arch/arm/boot/dts/imx6q-icore-mipi.dts
create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap7.dts
--
2.7.4
This adds support for the Ampire AM-800480AYTZQW-00H 7.0" WGA LCD,
which can be supported by the simple panel driver.
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Changes for v3:
- collect Rob reiew tag
Changes for v2:
- Updated binding info about optional properties, node and example
.../display/panel/ampire,am-800480aytzqw-00h.txt | 25 ++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
2 files changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt b/Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
new file mode 100644
index 0000000..abb5eee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ampire,am-800480aytzqw-00h.txt
@@ -0,0 +1,25 @@
+Ampire AM-800480AYTZQW-00H 7.0" WVGA TFT LCD panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "ampire,am-800480aytzqw-00h"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LVDS panel input.
+
+Example:
+ panel {
+ compatible = "ampire,am-800480aytzqw-00h";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 5591984..2ecc14b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -412,6 +412,30 @@ static const struct panel_desc ampire_am_480272h3tmqw_t01h = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
+static const struct display_timing ampire_am_800480aytzqw_00h_timing = {
+ .pixelclock = { 27700000, 29200000, 39600000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 12, 40, 212 },
+ .hback_porch = { 88, 88, 88 },
+ .hsync_len = { 1, 2, 40 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 1, 13, 88 },
+ .vback_porch = { 32, 32, 32 },
+ .vsync_len = { 1, 2, 3 },
+ .flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc ampire_am_800480aytzqw_00h = {
+ .timings = &ire_am_800480aytzqw_00h_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 154,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+};
+
static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = {
.clock = 33333,
.hdisplay = 800,
@@ -2028,6 +2052,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "ampire,am-480272h3tmqw-t01h",
.data = &ire_am_480272h3tmqw_t01h,
}, {
+ .compatible = "ampire,am-800480aytzqw-00h",
+ .data = &ire_am_800480aytzqw_00h,
+ }, {
.compatible = "ampire,am800480r3tmqwa1h",
.data = &ire_am800480r3tmqwa1h,
}, {
--
2.7.4
Switch to use ampire,am-800480aytzqw-00h LVDS timings from
panel-simple instead hard coding the same in dts.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v3, v2:
- none
arch/arm/boot/dts/imx6q-icore.dts | 31 +++++++++++++++++--------------
arch/arm/boot/dts/imx6qdl-icore.dtsi | 2 +-
2 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 5613dd9..c8e464e 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -48,6 +48,17 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+ panel {
+ compatible = "ampire,am-800480aytzqw-00h";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};
&can1 {
@@ -71,22 +82,14 @@
status = "okay";
lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
+ reg = <0>;
status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <60000000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <30>;
- hfront-porch = <30>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <64>;
- vsync-len = <20>;
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index a1b469c..5fd9e00 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -49,7 +49,7 @@
reg = <0x10000000 0x80000000>;
};
- backlight {
+ backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 100000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
--
2.7.4
Switch to use koe_tx31d200vm0baa LVDS timings from
panel-simple instead hard coding the same in dts.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v3, v2:
- none
arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
index 9e230f5..6e27c81 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -48,28 +48,31 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+ panel {
+ compatible = "koe,tx31d200vm0baa";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};
&ldb {
status = "okay";
lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
+ reg = <0>;
status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <46800000>;
- hactive = <1280>;
- vactive = <480>;
- hback-porch = <353>;
- hfront-porch = <47>;
- vback-porch = <39>;
- vfront-porch = <4>;
- hsync-len = <8>;
- vsync-len = <2>;
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
--
2.7.4
This adds support for the Kaohsiung Opto-Electronics.,
TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be
supported by the simple panel driver.
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Changes for v3:
- collect Rob reiew tag
Changes for v2:
- Updated binding info about optional properties, node and example
.../bindings/display/panel/koe,tx31d200vm0baa.txt | 25 ++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
2 files changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
new file mode 100644
index 0000000..6a036ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
@@ -0,0 +1,25 @@
+Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "koe,tx31d200vm0baa"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LVDS panel input.
+
+Example:
+ panel {
+ compatible = "koe,tx31d200vm0baa";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 2ecc14b..8a0e4a8 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1241,6 +1241,30 @@ static const struct panel_desc innolux_zj070na_01p = {
},
};
+static const struct display_timing koe_tx31d200vm0baa_timing = {
+ .pixelclock = { 39600000, 43200000, 48000000 },
+ .hactive = { 1280, 1280, 1280 },
+ .hfront_porch = { 16, 36, 56 },
+ .hback_porch = { 16, 36, 56 },
+ .hsync_len = { 8, 8, 8 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 6, 21, 33.5 },
+ .vback_porch = { 6, 21, 33.5 },
+ .vsync_len = { 8, 8, 8 },
+ .flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc koe_tx31d200vm0baa = {
+ .timings = &koe_tx31d200vm0baa_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 292,
+ .height = 109,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+};
+
static const struct display_timing kyo_tcg121xglp_timing = {
.pixelclock = { 52000000, 65000000, 71000000 },
.hactive = { 1024, 1024, 1024 },
@@ -2151,6 +2175,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "innolux,zj070na-01p",
.data = &innolux_zj070na_01p,
}, {
+ .compatible = "koe,tx31d200vm0baa",
+ .data = &koe_tx31d200vm0baa,
+ }, {
.compatible = "kyo,tcg121xglp",
.data = &kyo_tcg121xglp,
}, {
--
2.7.4
Add ampire,am-800480aytzqw-00h LVDS support by using
timings from panel-simple.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v3, v2:
- none
arch/arm/boot/dts/imx6dl-icore.dts | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
index 971f9fc..74bff84 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -48,6 +48,17 @@
/ {
model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
compatible = "engicam,imx6-icore", "fsl,imx6dl";
+
+ panel {
+ compatible = "ampire,am-800480aytzqw-00h";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};
&can1 {
@@ -66,3 +77,20 @@
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ reg = <0>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
--
2.7.4
i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected
to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for
Android and video capture application.
notable features:
CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz
Memory Up to 2 GB DDR3-1066
Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4
port 8 bit CSI INPUT MIPI-CSI INPUT
1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v3:
- none
Changes for v2:
- new patch
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-icore-mipi.dts | 25 +++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-icore.dtsi | 23 +++++++++++++++++++++++
3 files changed, 49 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-icore-mipi.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index aa60320..a0e46f3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -456,6 +456,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-hummingboard2-emmc-som-v15.dtb \
imx6q-hummingboard2-som-v15.dtb \
imx6q-icore.dtb \
+ imx6q-icore-mipi.dtb \
imx6q-icore-ofcap10.dtb \
imx6q-icore-ofcap12.dtb \
imx6q-icore-ofcap7.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
new file mode 100644
index 0000000..acd3d33
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Engicam S.r.l.
+ * Copyright (C) 2017 Amarula Solutions B.V.
+ * Author: Jagan Teki <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit";
+ compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 5fd9e00..d696447 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -265,6 +265,14 @@
status = "okay";
};
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ no-1-8-v;
+ non-removable;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_audmux: audmux {
fsl,pins = <
@@ -378,4 +386,19 @@
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
>;
};
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
};
--
2.7.4
i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus
openframe display carriers" which are good solution for develop user
friendly graphic user interface.
ofcap 7 general features:
CPU NXP Freescale i.MX6Q rev1.5 at 792 MHz
RAM 1GB, 32, 64 bit, DDR3-800/1066
NAND SLC, 512MB
LVDS Display TFT 7" industrial, 800x480 resolution
Touchscreen EP0700M06 EDT Polytouch capacitive touch screen
Backlight LED backlight, brightness 300 Cd/m2
Power supply 15 to 30 Vdc
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v3:
- none
Changes for v2:
- Updated licence text - remove big notes, add SPDX and author
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-icore-ofcap7.dts | 65 ++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap7.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ade7a38..aa60320 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -458,6 +458,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-icore.dtb \
imx6q-icore-ofcap10.dtb \
imx6q-icore-ofcap12.dtb \
+ imx6q-icore-ofcap7.dtb \
imx6q-icore-rqs.dtb \
imx6q-marsboard.dtb \
imx6q-mccmon6.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap7.dts b/arch/arm/boot/dts/imx6q-icore-ofcap7.dts
new file mode 100644
index 0000000..6ff7a0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap7.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Engicam S.r.l.
+ * Copyright (C) 2017 Amarula Solutions B.V.
+ * Author: Jagan Teki <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 7 Kit";
+ compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+ panel {
+ compatible = "ampire,am-800480aytzqw-00h";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ ep0700m06: touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_edt_ft5x06>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <30 IRQ_TYPE_NONE>;
+ reset-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ reg = <0>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_edt_ft5x06: edt-ft5x06grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0 /*interrupt*/
+ MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x1b0b0 /*reset edt*/
+ >;
+ };
+};
--
2.7.4
On Sun, Feb 04, 2018 at 11:19:24PM +0530, Jagan Teki wrote:
> Series adda LVDS panel attributes on panel drivers instead of defining
> them in dts nodes, and also added new icorem6 engicam boards.
>
> Jagan Teki (7):
> drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H
> ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple
> ARM: dts: imx6dl-icore: Add LVDS node
> drm/panel: simple: Add support for KEO TX31D200VM0BAA
> ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple
> ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 7
> initial support
> ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit
> support
>
> .../display/panel/ampire,am-800480aytzqw-00h.txt | 25 +++++++++
> .../bindings/display/panel/koe,tx31d200vm0baa.txt | 25 +++++++++
...
> drivers/gpu/drm/panel/panel-simple.c | 54 ++++++++++++++++++
The dts files should really be sent only after above bindings doc and
driver changes get merged first.
Shawn
On Mon, Feb 5, 2018 at 4:28 PM, Shawn Guo <[email protected]> wrote:
> On Sun, Feb 04, 2018 at 11:19:24PM +0530, Jagan Teki wrote:
>> Series adda LVDS panel attributes on panel drivers instead of defining
>> them in dts nodes, and also added new icorem6 engicam boards.
>>
>> Jagan Teki (7):
>> drm/panel: simple: add support for Ampire AM-800480AYTZQW-00H
>> ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple
>> ARM: dts: imx6dl-icore: Add LVDS node
>> drm/panel: simple: Add support for KEO TX31D200VM0BAA
>> ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple
>> ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 7
>> initial support
>> ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit
>> support
>>
>> .../display/panel/ampire,am-800480aytzqw-00h.txt | 25 +++++++++
>> .../bindings/display/panel/koe,tx31d200vm0baa.txt | 25 +++++++++
> ...
>> drivers/gpu/drm/panel/panel-simple.c | 54 ++++++++++++++++++
>
> The dts files should really be sent only after above bindings doc and
> driver changes get merged first.
OK, I will send drm/panel changes first.
On Sun, Feb 04, 2018 at 11:19:28PM +0530, Jagan Teki wrote:
> This adds support for the Kaohsiung Opto-Electronics.,
> TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be
> supported by the simple panel driver.
>
> Signed-off-by: Jagan Teki <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> ---
> Changes for v3:
> - collect Rob reiew tag
> Changes for v2:
> - Updated binding info about optional properties, node and example
>
> .../bindings/display/panel/koe,tx31d200vm0baa.txt | 25 ++++++++++++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
> 2 files changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
The koe vendor prefix is undocumented, please send a patch to add it to
Documentation/devicetree/bindings/vendor-prefixes.txt.
Thierry