This converts from using a platform device for the CFGCHIP syscon
regmap to using platform data to pass the regmap to consumers.
A lazy getter function is used so that the regmap will only be
created if it is actually used. This function will also be used
in the clock init when we convert to the common clock framework.
The USB PHY driver is currently the only consumer. This driver is
updated to use platform data to get the CFGCHIP regmap instead of
syscon_regmap_lookup_by_pdevname().
Signed-off-by: David Lechner <[email protected]>>
Acked-by: Kishon Vijay Abraham I <[email protected]>
---
v2 changes:
- add #ifndef/#define to header file
arch/arm/mach-davinci/board-da830-evm.c | 4 ---
arch/arm/mach-davinci/board-da850-evm.c | 4 ---
arch/arm/mach-davinci/board-mityomapl138.c | 4 ---
arch/arm/mach-davinci/board-omapl138-hawk.c | 4 ---
arch/arm/mach-davinci/devices-da8xx.c | 45 +++++++++++++++--------------
arch/arm/mach-davinci/include/mach/da8xx.h | 3 +-
arch/arm/mach-davinci/usb-da8xx.c | 6 ++++
drivers/phy/ti/phy-da8xx-usb.c | 8 +++--
include/linux/platform_data/phy-da8xx-usb.h | 21 ++++++++++++++
9 files changed, 58 insertions(+), 41 deletions(-)
create mode 100644 include/linux/platform_data/phy-da8xx-usb.h
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 7aa1262..004f9c8 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -551,10 +551,6 @@ static __init void da830_evm_init(void)
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
- ret = da8xx_register_cfgchip();
- if (ret)
- pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
ret = da830_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index d9d423d..3063478 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1334,10 +1334,6 @@ static __init void da850_evm_init(void)
{
int ret;
- ret = da8xx_register_cfgchip();
- if (ret)
- pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index f9a725a..d1c8548 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -502,10 +502,6 @@ static void __init mityomapl138_init(void)
{
int ret;
- ret = da8xx_register_cfgchip();
- if (ret)
- pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
/* for now, no special EDMA channels are reserved */
ret = da850_register_edma(NULL);
if (ret)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index bc8a747..e2ba9da 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -281,10 +281,6 @@ static __init void omapl138_hawk_init(void)
{
int ret;
- ret = da8xx_register_cfgchip();
- if (ret)
- pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index fe5e15a..24422ba 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -11,7 +11,6 @@
* (at your option) any later version.
*/
#include <linux/init.h>
-#include <linux/platform_data/syscon.h>
#include <linux/platform_device.h>
#include <linux/dma-contiguous.h>
#include <linux/serial_8250.h>
@@ -1105,29 +1104,33 @@ int __init da850_register_sata(unsigned long refclkpn)
}
#endif
-static struct syscon_platform_data da8xx_cfgchip_platform_data = {
- .label = "cfgchip",
-};
+static struct regmap *da8xx_cfgchip;
-static struct resource da8xx_cfgchip_resources[] = {
- {
- .start = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP0_REG,
- .end = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP4_REG + 3,
- .flags = IORESOURCE_MEM,
- },
-};
+/* regmap doesn't make a copy of this, so we need to keep the pointer around */
+static const char da8xx_cfgchip_name[] = "cfgchip";
-static struct platform_device da8xx_cfgchip_device = {
- .name = "syscon",
- .id = -1,
- .dev = {
- .platform_data = &da8xx_cfgchip_platform_data,
- },
- .num_resources = ARRAY_SIZE(da8xx_cfgchip_resources),
- .resource = da8xx_cfgchip_resources,
+static const struct regmap_config da8xx_cfgchip_config __initconst = {
+ .name = da8xx_cfgchip_name,
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = DA8XX_CFGCHIP4_REG - DA8XX_CFGCHIP0_REG,
};
-int __init da8xx_register_cfgchip(void)
+/**
+ * da8xx_get_cfgchip - Lazy gets CFGCHIP as regmap
+ *
+ * This is for use on non-DT boards only. For DT boards, use
+ * syscon_regmap_lookup_by_compatible("ti,da830-cfgchip")
+ *
+ * Returns: Pointer to the CFGCHIP regmap or negative error code.
+ */
+struct regmap * __init da8xx_get_cfgchip(void)
{
- return platform_device_register(&da8xx_cfgchip_device);
+ if (IS_ERR_OR_NULL(da8xx_cfgchip))
+ da8xx_cfgchip = regmap_init_mmio(NULL,
+ DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG),
+ &da8xx_cfgchip_config);
+
+ return da8xx_cfgchip;
}
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 3481a0d..9fd6d01 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -18,6 +18,7 @@
#include <linux/spi/spi.h>
#include <linux/platform_data/davinci_asp.h>
#include <linux/reboot.h>
+#include <linux/regmap.h>
#include <linux/videodev2.h>
#include <mach/serial.h>
@@ -125,7 +126,7 @@ void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
int da850_register_gpio(void);
int da830_register_gpio(void);
-int da8xx_register_cfgchip(void);
+struct regmap *da8xx_get_cfgchip(void);
extern struct platform_device da8xx_serial_device[];
extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index fb31f6e..4d89d86 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -8,6 +8,7 @@
#include <linux/init.h>
#include <linux/mfd/da8xx-cfgchip.h>
#include <linux/phy/phy.h>
+#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
@@ -40,6 +41,11 @@ static struct platform_device da8xx_usb_phy = {
int __init da8xx_register_usb_phy(void)
{
+ struct da8xx_usb_phy_platform_data pdata;
+
+ pdata.cfgchip = da8xx_get_cfgchip();
+ da8xx_usb_phy.dev.platform_data = &pdata;
+
return platform_device_register(&da8xx_usb_phy);
}
diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
index 5bd33d0..befb886 100644
--- a/drivers/phy/ti/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -20,6 +20,7 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
+#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -145,6 +146,7 @@ static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
static int da8xx_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct da8xx_usb_phy_platform_data *pdata = dev->platform_data;
struct device_node *node = dev->of_node;
struct da8xx_usb_phy *d_phy;
@@ -152,11 +154,11 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
if (!d_phy)
return -ENOMEM;
- if (node)
+ if (pdata)
+ d_phy->regmap = pdata->cfgchip;
+ else
d_phy->regmap = syscon_regmap_lookup_by_compatible(
"ti,da830-cfgchip");
- else
- d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon");
if (IS_ERR(d_phy->regmap)) {
dev_err(dev, "Failed to get syscon\n");
return PTR_ERR(d_phy->regmap);
diff --git a/include/linux/platform_data/phy-da8xx-usb.h b/include/linux/platform_data/phy-da8xx-usb.h
new file mode 100644
index 0000000..85c2b99
--- /dev/null
+++ b/include/linux/platform_data/phy-da8xx-usb.h
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
+ *
+ * Copyright (C) 2018 David Lechner <[email protected]>
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__
+#define __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__
+
+#include <linux/regmap.h>
+
+/**
+ * da8xx_usb_phy_platform_data
+ * @cfgchip: CFGCHIP syscon regmap
+ */
+struct da8xx_usb_phy_platform_data {
+ struct regmap *cfgchip;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__ */
--
2.7.4
On Sunday 18 February 2018 08:52 AM, David Lechner wrote:
> This converts from using a platform device for the CFGCHIP syscon
> regmap to using platform data to pass the regmap to consumers.
>
> A lazy getter function is used so that the regmap will only be
> created if it is actually used. This function will also be used
> in the clock init when we convert to the common clock framework.
>
> The USB PHY driver is currently the only consumer. This driver is
> updated to use platform data to get the CFGCHIP regmap instead of
> syscon_regmap_lookup_by_pdevname().
>
> Signed-off-by: David Lechner <[email protected]>>
> Acked-by: Kishon Vijay Abraham I <[email protected]>
>
> ---
>
> v2 changes:
> - add #ifndef/#define to header file
Thanks. Picked this instead of the earlier version I had queued.
Regards,
Sekhar