Hello,
10th round, one step closer to finalize CEU inclusion (hopefully).
I have dropped patch 11/11 of v9 as it is still a debated topic and I would
like to have it clarified without blocking this series.
In patch [3/10] Hans noticed that after changing input, format should be set on
CEU again to make sure userspace can start streaming operations. While
there's no clear preference if applying default formats to the newly selected
input is the best option, I went for this one. While at there I renamed the
"ceu_init_formats()" function to "ceu_init_mbus_fmt()" and moved field
selection to "ceu_set[_default]_fmt()" functions.
In patch [7/10] I have dropped two redundant memsets and closed a few warnings
received from 0-day running sparse on the patch. I have declared two fields as
static, and transformed an "if" clause in a "switch" one, to catch all possible
cases with a "default" one and while at there replaced the frame interval array
size definition with an explicit ARRAY_SIZE().
Apart from that, all patches are now acked/reviewed, apart from 03/10 that has
Hans' ack still pending.
Diff from v9 is so short, I captured it here for the interested ones:
https://paste.debian.net/hidden/91567755
Thanks
j
v9->v10:
- Close 0-days warning on ov772x frame interval
- Set default format on CEU after input change
- Drop ov7670 mbus frame format set not to block this series while topic
gets clarified
v8->v9:
- Address Laurent's review of ov772x frame rate
- Address Sergei comment on ceu node name
v7->v8:
- Calculate PLL divider/multiplier and do not use static tables
- Change RZ/A1-H to RZ/A1H (same for L) in bindings documentation
- Use rounded clock rate in Migo-R board code as SH clk_set_clk()
implementation does not perform rounding
- Set ycbcr_enc and other fields of v4l2_mbus_format for ov772x as patch
[11/11] does for ov7670
v6->v7:
- Add patch to handle ycbr_enc and other fields of v4l2_mbus_format for ov7670
- Add patch to handle frame interval for ov772x
- Rebased on Hans' media-tree/parm branch with v4l2_g/s_parm_cap
- Drop const modifier in CEU releated fields of Migo-R setup.c board file
to silence complier warnings.
v5->v6:
- Add Hans' Acked-by to most patches
- Fix a bad change in ov772x get_selection
- Add .buf_prepare callack to CEU and verify plane sizes there
- Remove VB2_USERPTR from supported io_modes in CEU driver
- Remove read() fops in CEU driver
v4->v5:
- Added Rob's and Laurent's Reviewed-by tag to DT bindings
- Change CEU driver module license to "GPL v2" to match SPDX identifier as
suggested by Philippe Ombredanne
- Make struct ceu_data static as suggested by Laurent and add his
Reviewed-by to CEU driver.
v3->v4:
- Drop generic fallback compatible string "renesas,ceu"
- Addressed Laurent's comments on [3/9]
- Fix error messages on irq get/request
- Do not leak ceudev if irq_get fails
- Make irq_mask a const field
v2->v3:
- Improved DT bindings removing standard properties (pinctrl- ones and
remote-endpoint) not specific to this driver and improved description of
compatible strings
- Remove ov772x's xlkc_rate property and set clock rate in Migo-R board file
- Made 'xclk' clock private to ov772x driver in Migo-R board file
- Change 'rstb' GPIO active output level and changed ov772x and tw9910 drivers
accordingly as suggested by Fabio
- Minor changes in CEU driver to address Laurent's comments
- Moved Migo-R setup patch to the end of the series to silence 0-day bot
- Renamed tw9910 clock to 'xti' as per video decoder manual
- Changed all SPDX identifiers to GPL-2.0 from previous GPL-2.0+
v1->v2:
- DT
-- Addressed Geert's comments and added clocks for CEU to mstp6 clock source
-- Specified supported generic video iterfaces properties in dt-bindings and
simplified example
- CEU driver
-- Re-worked interrupt handler, interrupt management, reset(*) and capture
start operation
-- Re-worked querycap/enum_input/enum_frameintervals to fix some
v4l2_compliance failures
-- Removed soc_camera legacy operations g/s_mbus_format
-- Update to new notifier implementation
-- Fixed several comments from Hans, Laurent and Sakari
- Migo-R
-- Register clocks and gpios for sensor drivers in Migo-R setup
-- Updated sensors (tw9910 and ov772x) drivers headers and drivers to close
remarks from Hans and Laurent:
--- Removed platform callbacks and handle clocks and gpios from sensor drivers
--- Remove g/s_mbus_config operations
Jacopo Mondi (10):
dt-bindings: media: Add Renesas CEU bindings
include: media: Add Renesas CEU driver interface
media: platform: Add Renesas CEU driver
ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
media: i2c: Copy ov772x soc_camera sensor driver
media: i2c: ov772x: Remove soc_camera dependencies
media: i2c: ov772x: Support frame interval handling
media: i2c: Copy tw9910 soc_camera sensor driver
media: i2c: tw9910: Remove soc_camera dependencies
arch: sh: migor: Use new renesas-ceu camera driver
.../devicetree/bindings/media/renesas,ceu.txt | 81 +
arch/arm/boot/dts/r7s72100.dtsi | 15 +-
arch/sh/boards/mach-migor/setup.c | 225 ++-
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 2 +-
drivers/media/i2c/Kconfig | 20 +
drivers/media/i2c/Makefile | 2 +
drivers/media/i2c/ov772x.c | 1365 ++++++++++++++++
drivers/media/i2c/tw9910.c | 1039 ++++++++++++
drivers/media/platform/Kconfig | 9 +
drivers/media/platform/Makefile | 1 +
drivers/media/platform/renesas-ceu.c | 1670 ++++++++++++++++++++
include/media/drv-intf/renesas-ceu.h | 26 +
include/media/i2c/ov772x.h | 6 +-
include/media/i2c/tw9910.h | 9 +
14 files changed, 4339 insertions(+), 131 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/renesas,ceu.txt
create mode 100644 drivers/media/i2c/ov772x.c
create mode 100644 drivers/media/i2c/tw9910.c
create mode 100644 drivers/media/platform/renesas-ceu.c
create mode 100644 include/media/drv-intf/renesas-ceu.h
--
2.7.4
Add driver for Renesas Capture Engine Unit (CEU).
The CEU interface supports capturing 'data' (YUV422) and 'images'
(NV[12|21|16|61]).
This driver aims to replace the soc_camera-based sh_mobile_ceu one.
Tested with ov7670 camera sensor, providing YUYV_2X8 data on Renesas RZ
platform GR-Peach.
Tested with ov7725 camera sensor on SH4 platform Migo-R.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
---
drivers/media/platform/Kconfig | 9 +
drivers/media/platform/Makefile | 1 +
drivers/media/platform/renesas-ceu.c | 1670 ++++++++++++++++++++++++++++++++++
3 files changed, 1680 insertions(+)
create mode 100644 drivers/media/platform/renesas-ceu.c
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 614fbef..f9cc058 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -144,6 +144,15 @@ config VIDEO_STM32_DCMI
To compile this driver as a module, choose M here: the module
will be called stm32-dcmi.
+config VIDEO_RENESAS_CEU
+ tristate "Renesas Capture Engine Unit (CEU) driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
+ depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_FWNODE
+ ---help---
+ This is a v4l2 driver for the Renesas CEU Interface
+
source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/am437x/Kconfig"
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index 7f30804..85e1121 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
obj-$(CONFIG_SOC_CAMERA) += soc_camera/
obj-$(CONFIG_VIDEO_RCAR_DRIF) += rcar_drif.o
+obj-$(CONFIG_VIDEO_RENESAS_CEU) += renesas-ceu.o
obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o
obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o
obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o
diff --git a/drivers/media/platform/renesas-ceu.c b/drivers/media/platform/renesas-ceu.c
new file mode 100644
index 0000000..6624fba
--- /dev/null
+++ b/drivers/media/platform/renesas-ceu.c
@@ -0,0 +1,1670 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * V4L2 Driver for Renesas Capture Engine Unit (CEU) interface
+ * Copyright (C) 2017-2018 Jacopo Mondi <[email protected]>
+ *
+ * Based on soc-camera driver "soc_camera/sh_mobile_ceu_camera.c"
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on V4L2 Driver for PXA camera host - "pxa_camera.c",
+ * Copyright (C) 2006, Sascha Hauer, Pengutronix
+ * Copyright (C) 2008, Guennadi Liakhovetski <[email protected]>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-image-sizes.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mediabus.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include <media/drv-intf/renesas-ceu.h>
+
+#define DRIVER_NAME "renesas-ceu"
+
+/* CEU registers offsets and masks. */
+#define CEU_CAPSR 0x00 /* Capture start register */
+#define CEU_CAPCR 0x04 /* Capture control register */
+#define CEU_CAMCR 0x08 /* Capture interface control register */
+#define CEU_CAMOR 0x10 /* Capture interface offset register */
+#define CEU_CAPWR 0x14 /* Capture interface width register */
+#define CEU_CAIFR 0x18 /* Capture interface input format register */
+#define CEU_CRCNTR 0x28 /* CEU register control register */
+#define CEU_CRCMPR 0x2c /* CEU register forcible control register */
+#define CEU_CFLCR 0x30 /* Capture filter control register */
+#define CEU_CFSZR 0x34 /* Capture filter size clip register */
+#define CEU_CDWDR 0x38 /* Capture destination width register */
+#define CEU_CDAYR 0x3c /* Capture data address Y register */
+#define CEU_CDACR 0x40 /* Capture data address C register */
+#define CEU_CFWCR 0x5c /* Firewall operation control register */
+#define CEU_CDOCR 0x64 /* Capture data output control register */
+#define CEU_CEIER 0x70 /* Capture event interrupt enable register */
+#define CEU_CETCR 0x74 /* Capture event flag clear register */
+#define CEU_CSTSR 0x7c /* Capture status register */
+#define CEU_CSRTR 0x80 /* Capture software reset register */
+
+/* Data synchronous fetch mode. */
+#define CEU_CAMCR_JPEG BIT(4)
+
+/* Input components ordering: CEU_CAMCR.DTARY field. */
+#define CEU_CAMCR_DTARY_8_UYVY (0x00 << 8)
+#define CEU_CAMCR_DTARY_8_VYUY (0x01 << 8)
+#define CEU_CAMCR_DTARY_8_YUYV (0x02 << 8)
+#define CEU_CAMCR_DTARY_8_YVYU (0x03 << 8)
+/* TODO: input components ordering for 16 bits input. */
+
+/* Bus transfer MTU. */
+#define CEU_CAPCR_BUS_WIDTH256 (0x3 << 20)
+
+/* Bus width configuration. */
+#define CEU_CAMCR_DTIF_16BITS BIT(12)
+
+/* No downsampling to planar YUV420 in image fetch mode. */
+#define CEU_CDOCR_NO_DOWSAMPLE BIT(4)
+
+/* Swap all input data in 8-bit, 16-bits and 32-bits units (Figure 46.45). */
+#define CEU_CDOCR_SWAP_ENDIANNESS (7)
+
+/* Capture reset and enable bits. */
+#define CEU_CAPSR_CPKIL BIT(16)
+#define CEU_CAPSR_CE BIT(0)
+
+/* CEU operating flag bit. */
+#define CEU_CAPCR_CTNCP BIT(16)
+#define CEU_CSTRST_CPTON BIT(1)
+
+/* Platform specific IRQ source flags. */
+#define CEU_CETCR_ALL_IRQS_RZ 0x397f313
+#define CEU_CETCR_ALL_IRQS_SH4 0x3d7f313
+
+/* Prohibited register access interrupt bit. */
+#define CEU_CETCR_IGRW BIT(4)
+/* One-frame capture end interrupt. */
+#define CEU_CEIER_CPE BIT(0)
+/* VBP error. */
+#define CEU_CEIER_VBP BIT(20)
+#define CEU_CEIER_MASK (CEU_CEIER_CPE | CEU_CEIER_VBP)
+
+#define CEU_MAX_WIDTH 2560
+#define CEU_MAX_HEIGHT 1920
+#define CEU_MAX_BPL 8188
+#define CEU_W_MAX(w) ((w) < CEU_MAX_WIDTH ? (w) : CEU_MAX_WIDTH)
+#define CEU_H_MAX(h) ((h) < CEU_MAX_HEIGHT ? (h) : CEU_MAX_HEIGHT)
+
+/*
+ * ceu_bus_fmt - describe a 8-bits yuyv format the sensor can produce
+ *
+ * @mbus_code: bus format code
+ * @fmt_order: CEU_CAMCR.DTARY ordering of input components (Y, Cb, Cr)
+ * @fmt_order_swap: swapped CEU_CAMCR.DTARY ordering of input components
+ * (Y, Cr, Cb)
+ * @swapped: does Cr appear before Cb?
+ * @bps: number of bits sent over bus for each sample
+ * @bpp: number of bits per pixels unit
+ */
+struct ceu_mbus_fmt {
+ u32 mbus_code;
+ u32 fmt_order;
+ u32 fmt_order_swap;
+ bool swapped;
+ u8 bps;
+ u8 bpp;
+};
+
+/*
+ * ceu_buffer - Link vb2 buffer to the list of available buffers.
+ */
+struct ceu_buffer {
+ struct vb2_v4l2_buffer vb;
+ struct list_head queue;
+};
+
+static inline struct ceu_buffer *vb2_to_ceu(struct vb2_v4l2_buffer *vbuf)
+{
+ return container_of(vbuf, struct ceu_buffer, vb);
+}
+
+/*
+ * ceu_subdev - Wraps v4l2 sub-device and provides async subdevice.
+ */
+struct ceu_subdev {
+ struct v4l2_subdev *v4l2_sd;
+ struct v4l2_async_subdev asd;
+
+ /* per-subdevice mbus configuration options */
+ unsigned int mbus_flags;
+ struct ceu_mbus_fmt mbus_fmt;
+};
+
+static struct ceu_subdev *to_ceu_subdev(struct v4l2_async_subdev *asd)
+{
+ return container_of(asd, struct ceu_subdev, asd);
+}
+
+/*
+ * ceu_device - CEU device instance
+ */
+struct ceu_device {
+ struct device *dev;
+ struct video_device vdev;
+ struct v4l2_device v4l2_dev;
+
+ /* subdevices descriptors */
+ struct ceu_subdev *subdevs;
+ /* the subdevice currently in use */
+ struct ceu_subdev *sd;
+ unsigned int sd_index;
+ unsigned int num_sd;
+
+ /* platform specific mask with all IRQ sources flagged */
+ u32 irq_mask;
+
+ /* currently configured field and pixel format */
+ enum v4l2_field field;
+ struct v4l2_pix_format_mplane v4l2_pix;
+
+ /* async subdev notification helpers */
+ struct v4l2_async_notifier notifier;
+ /* pointers to "struct ceu_subdevice -> asd" */
+ struct v4l2_async_subdev **asds;
+
+ /* vb2 queue, capture buffer list and active buffer pointer */
+ struct vb2_queue vb2_vq;
+ struct list_head capture;
+ struct vb2_v4l2_buffer *active;
+ unsigned int sequence;
+
+ /* mlock - lock access to interface reset and vb2 queue */
+ struct mutex mlock;
+
+ /* lock - lock access to capture buffer queue and active buffer */
+ spinlock_t lock;
+
+ /* base - CEU memory base address */
+ void __iomem *base;
+};
+
+static inline struct ceu_device *v4l2_to_ceu(struct v4l2_device *v4l2_dev)
+{
+ return container_of(v4l2_dev, struct ceu_device, v4l2_dev);
+}
+
+/* --- CEU memory output formats --- */
+
+/*
+ * ceu_fmt - describe a memory output format supported by CEU interface.
+ *
+ * @fourcc: memory layout fourcc format code
+ * @bpp: number of bits for each pixel stored in memory
+ */
+struct ceu_fmt {
+ u32 fourcc;
+ u32 bpp;
+};
+
+/*
+ * ceu_format_list - List of supported memory output formats
+ *
+ * If sensor provides any YUYV bus format, all the following planar memory
+ * formats are available thanks to CEU re-ordering and sub-sampling
+ * capabilities.
+ */
+static const struct ceu_fmt ceu_fmt_list[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_NV16,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_NV61,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .bpp = 12,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_NV21,
+ .bpp = 12,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .bpp = 16,
+ },
+};
+
+static const struct ceu_fmt *get_ceu_fmt_from_fourcc(unsigned int fourcc)
+{
+ const struct ceu_fmt *fmt = &ceu_fmt_list[0];
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(ceu_fmt_list); i++, fmt++)
+ if (fmt->fourcc == fourcc)
+ return fmt;
+
+ return NULL;
+}
+
+static bool ceu_fmt_mplane(struct v4l2_pix_format_mplane *pix)
+{
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_YUYV:
+ return false;
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* --- CEU HW operations --- */
+
+static void ceu_write(struct ceu_device *priv, unsigned int reg_offs, u32 data)
+{
+ iowrite32(data, priv->base + reg_offs);
+}
+
+static u32 ceu_read(struct ceu_device *priv, unsigned int reg_offs)
+{
+ return ioread32(priv->base + reg_offs);
+}
+
+/*
+ * ceu_soft_reset() - Software reset the CEU interface.
+ * @ceu_device: CEU device.
+ *
+ * Returns 0 for success, -EIO for error.
+ */
+static int ceu_soft_reset(struct ceu_device *ceudev)
+{
+ unsigned int i;
+
+ ceu_write(ceudev, CEU_CAPSR, CEU_CAPSR_CPKIL);
+
+ for (i = 0; i < 100; i++) {
+ if (!(ceu_read(ceudev, CEU_CSTSR) & CEU_CSTRST_CPTON))
+ break;
+ udelay(1);
+ }
+
+ if (i == 100) {
+ dev_err(ceudev->dev, "soft reset time out\n");
+ return -EIO;
+ }
+
+ for (i = 0; i < 100; i++) {
+ if (!(ceu_read(ceudev, CEU_CAPSR) & CEU_CAPSR_CPKIL))
+ return 0;
+ udelay(1);
+ }
+
+ /* If we get here, CEU has not reset properly. */
+ return -EIO;
+}
+
+/* --- CEU Capture Operations --- */
+
+/*
+ * ceu_hw_config() - Configure CEU interface registers.
+ */
+static int ceu_hw_config(struct ceu_device *ceudev)
+{
+ u32 camcr, cdocr, cfzsr, cdwdr, capwr;
+ struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix;
+ struct ceu_subdev *ceu_sd = ceudev->sd;
+ struct ceu_mbus_fmt *mbus_fmt = &ceu_sd->mbus_fmt;
+ unsigned int mbus_flags = ceu_sd->mbus_flags;
+
+ /* Start configuring CEU registers */
+ ceu_write(ceudev, CEU_CAIFR, 0);
+ ceu_write(ceudev, CEU_CFWCR, 0);
+ ceu_write(ceudev, CEU_CRCNTR, 0);
+ ceu_write(ceudev, CEU_CRCMPR, 0);
+
+ /* Set the frame capture period for both image capture and data sync. */
+ capwr = (pix->height << 16) | pix->width * mbus_fmt->bpp / 8;
+
+ /*
+ * Swap input data endianness by default.
+ * In data fetch mode bytes are received in chunks of 8 bytes.
+ * D0, D1, D2, D3, D4, D5, D6, D7 (D0 received first)
+ * The data is however by default written to memory in reverse order:
+ * D7, D6, D5, D4, D3, D2, D1, D0 (D7 written to lowest byte)
+ *
+ * Use CEU_CDOCR[2:0] to swap data ordering.
+ */
+ cdocr = CEU_CDOCR_SWAP_ENDIANNESS;
+
+ /*
+ * Configure CAMCR and CDOCR:
+ * match input components ordering with memory output format and
+ * handle downsampling to YUV420.
+ *
+ * If the memory output planar format is 'swapped' (Cr before Cb) and
+ * input format is not, use the swapped version of CAMCR.DTARY.
+ *
+ * If the memory output planar format is not 'swapped' (Cb before Cr)
+ * and input format is, use the swapped version of CAMCR.DTARY.
+ *
+ * CEU by default downsample to planar YUV420 (CDCOR[4] = 0).
+ * If output is planar YUV422 set CDOCR[4] = 1
+ *
+ * No downsample for data fetch sync mode.
+ */
+ switch (pix->pixelformat) {
+ /* Data fetch sync mode */
+ case V4L2_PIX_FMT_YUYV:
+ /* TODO: handle YUYV permutations through DTARY bits. */
+ camcr = CEU_CAMCR_JPEG;
+ cdocr |= CEU_CDOCR_NO_DOWSAMPLE;
+ cfzsr = (pix->height << 16) | pix->width;
+ cdwdr = pix->plane_fmt[0].bytesperline;
+ break;
+
+ /* Non-swapped planar image capture mode. */
+ case V4L2_PIX_FMT_NV16:
+ cdocr |= CEU_CDOCR_NO_DOWSAMPLE;
+ case V4L2_PIX_FMT_NV12:
+ if (mbus_fmt->swapped)
+ camcr = mbus_fmt->fmt_order_swap;
+ else
+ camcr = mbus_fmt->fmt_order;
+
+ cfzsr = (pix->height << 16) | pix->width;
+ cdwdr = pix->width;
+ break;
+
+ /* Swapped planar image capture mode. */
+ case V4L2_PIX_FMT_NV61:
+ cdocr |= CEU_CDOCR_NO_DOWSAMPLE;
+ case V4L2_PIX_FMT_NV21:
+ if (mbus_fmt->swapped)
+ camcr = mbus_fmt->fmt_order;
+ else
+ camcr = mbus_fmt->fmt_order_swap;
+
+ cfzsr = (pix->height << 16) | pix->width;
+ cdwdr = pix->width;
+ break;
+ }
+
+ camcr |= mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
+ camcr |= mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
+
+ /* TODO: handle 16 bit bus width with DTIF bit in CAMCR */
+ ceu_write(ceudev, CEU_CAMCR, camcr);
+ ceu_write(ceudev, CEU_CDOCR, cdocr);
+ ceu_write(ceudev, CEU_CAPCR, CEU_CAPCR_BUS_WIDTH256);
+
+ /*
+ * TODO: make CAMOR offsets configurable.
+ * CAMOR wants to know the number of blanks between a VS/HS signal
+ * and valid data. This value should actually come from the sensor...
+ */
+ ceu_write(ceudev, CEU_CAMOR, 0);
+
+ /* TODO: 16 bit bus width require re-calculation of cdwdr and cfzsr */
+ ceu_write(ceudev, CEU_CAPWR, capwr);
+ ceu_write(ceudev, CEU_CFSZR, cfzsr);
+ ceu_write(ceudev, CEU_CDWDR, cdwdr);
+
+ return 0;
+}
+
+/*
+ * ceu_capture() - Trigger start of a capture sequence.
+ *
+ * Program the CEU DMA registers with addresses where to transfer image data.
+ */
+static int ceu_capture(struct ceu_device *ceudev)
+{
+ struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix;
+ dma_addr_t phys_addr_top;
+
+ phys_addr_top =
+ vb2_dma_contig_plane_dma_addr(&ceudev->active->vb2_buf, 0);
+ ceu_write(ceudev, CEU_CDAYR, phys_addr_top);
+
+ /* Ignore CbCr plane for non multi-planar image formats. */
+ if (ceu_fmt_mplane(pix)) {
+ phys_addr_top =
+ vb2_dma_contig_plane_dma_addr(&ceudev->active->vb2_buf,
+ 1);
+ ceu_write(ceudev, CEU_CDACR, phys_addr_top);
+ }
+
+ /*
+ * Trigger new capture start: once for each frame, as we work in
+ * one-frame capture mode.
+ */
+ ceu_write(ceudev, CEU_CAPSR, CEU_CAPSR_CE);
+
+ return 0;
+}
+
+static irqreturn_t ceu_irq(int irq, void *data)
+{
+ struct ceu_device *ceudev = data;
+ struct vb2_v4l2_buffer *vbuf;
+ struct ceu_buffer *buf;
+ u32 status;
+
+ /* Clean interrupt status. */
+ status = ceu_read(ceudev, CEU_CETCR);
+ ceu_write(ceudev, CEU_CETCR, ~ceudev->irq_mask);
+
+ /* Unexpected interrupt. */
+ if (!(status & CEU_CEIER_MASK))
+ return IRQ_NONE;
+
+ spin_lock(&ceudev->lock);
+
+ /* Stale interrupt from a released buffer, ignore it. */
+ vbuf = ceudev->active;
+ if (!vbuf) {
+ spin_unlock(&ceudev->lock);
+ return IRQ_HANDLED;
+ }
+
+ /*
+ * When a VBP interrupt occurs, no capture end interrupt will occur
+ * and the image of that frame is not captured correctly.
+ */
+ if (status & CEU_CEIER_VBP) {
+ dev_err(ceudev->dev, "VBP interrupt: abort capture\n");
+ goto error_irq_out;
+ }
+
+ /* Prepare to return the 'previous' buffer. */
+ vbuf->vb2_buf.timestamp = ktime_get_ns();
+ vbuf->sequence = ceudev->sequence++;
+ vbuf->field = ceudev->field;
+
+ /* Prepare a new 'active' buffer and trigger a new capture. */
+ if (!list_empty(&ceudev->capture)) {
+ buf = list_first_entry(&ceudev->capture, struct ceu_buffer,
+ queue);
+ list_del(&buf->queue);
+ ceudev->active = &buf->vb;
+
+ ceu_capture(ceudev);
+ }
+
+ /* Return the 'previous' buffer. */
+ vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE);
+
+ spin_unlock(&ceudev->lock);
+
+ return IRQ_HANDLED;
+
+error_irq_out:
+ /* Return the 'previous' buffer and all queued ones. */
+ vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_ERROR);
+
+ list_for_each_entry(buf, &ceudev->capture, queue)
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+
+ spin_unlock(&ceudev->lock);
+
+ return IRQ_HANDLED;
+}
+
+/* --- CEU Videobuf2 operations --- */
+
+static void ceu_update_plane_sizes(struct v4l2_plane_pix_format *plane,
+ unsigned int bpl, unsigned int szimage)
+{
+ memset(plane, 0, sizeof(*plane));
+
+ plane->sizeimage = szimage;
+ if (plane->bytesperline < bpl || plane->bytesperline > CEU_MAX_BPL)
+ plane->bytesperline = bpl;
+}
+
+/*
+ * ceu_calc_plane_sizes() - Fill per-plane 'struct v4l2_plane_pix_format'
+ * information according to the currently configured
+ * pixel format.
+ * @ceu_device: CEU device.
+ * @ceu_fmt: Active image format.
+ * @pix: Pixel format information (store line width and image sizes)
+ */
+static void ceu_calc_plane_sizes(struct ceu_device *ceudev,
+ const struct ceu_fmt *ceu_fmt,
+ struct v4l2_pix_format_mplane *pix)
+{
+ unsigned int bpl, szimage;
+
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_YUYV:
+ pix->num_planes = 1;
+ bpl = pix->width * ceu_fmt->bpp / 8;
+ szimage = pix->height * bpl;
+ ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage);
+ break;
+
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ pix->num_planes = 2;
+ bpl = pix->width;
+ szimage = pix->height * pix->width;
+ ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage);
+ ceu_update_plane_sizes(&pix->plane_fmt[1], bpl, szimage / 2);
+ break;
+
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ default:
+ pix->num_planes = 2;
+ bpl = pix->width;
+ szimage = pix->height * pix->width;
+ ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage);
+ ceu_update_plane_sizes(&pix->plane_fmt[1], bpl, szimage);
+ break;
+ }
+}
+
+/*
+ * ceu_vb2_setup() - is called to check whether the driver can accept the
+ * requested number of buffers and to fill in plane sizes
+ * for the current frame format, if required.
+ */
+static int ceu_vb2_setup(struct vb2_queue *vq, unsigned int *count,
+ unsigned int *num_planes, unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct ceu_device *ceudev = vb2_get_drv_priv(vq);
+ struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix;
+ unsigned int i;
+
+ /* num_planes is set: just check plane sizes. */
+ if (*num_planes) {
+ for (i = 0; i < pix->num_planes; i++)
+ if (sizes[i] < pix->plane_fmt[i].sizeimage)
+ return -EINVAL;
+
+ return 0;
+ }
+
+ /* num_planes not set: called from REQBUFS, just set plane sizes. */
+ *num_planes = pix->num_planes;
+ for (i = 0; i < pix->num_planes; i++)
+ sizes[i] = pix->plane_fmt[i].sizeimage;
+
+ return 0;
+}
+
+static void ceu_vb2_queue(struct vb2_buffer *vb)
+{
+ struct ceu_device *ceudev = vb2_get_drv_priv(vb->vb2_queue);
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct ceu_buffer *buf = vb2_to_ceu(vbuf);
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&ceudev->lock, irqflags);
+ list_add_tail(&buf->queue, &ceudev->capture);
+ spin_unlock_irqrestore(&ceudev->lock, irqflags);
+}
+
+static int ceu_vb2_prepare(struct vb2_buffer *vb)
+{
+ struct ceu_device *ceudev = vb2_get_drv_priv(vb->vb2_queue);
+ struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix;
+ unsigned int i;
+
+ for (i = 0; i < pix->num_planes; i++) {
+ if (vb2_plane_size(vb, i) < pix->plane_fmt[i].sizeimage) {
+ dev_err(ceudev->dev,
+ "Plane size too small (%lu < %u)\n",
+ vb2_plane_size(vb, i),
+ pix->plane_fmt[i].sizeimage);
+ return -EINVAL;
+ }
+
+ vb2_set_plane_payload(vb, i, pix->plane_fmt[i].sizeimage);
+ }
+
+ return 0;
+}
+
+static int ceu_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct ceu_device *ceudev = vb2_get_drv_priv(vq);
+ struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd;
+ struct ceu_buffer *buf;
+ unsigned long irqflags;
+ int ret;
+
+ /* Program the CEU interface according to the CEU image format. */
+ ret = ceu_hw_config(ceudev);
+ if (ret)
+ goto error_return_bufs;
+
+ ret = v4l2_subdev_call(v4l2_sd, video, s_stream, 1);
+ if (ret && ret != -ENOIOCTLCMD) {
+ dev_dbg(ceudev->dev,
+ "Subdevice failed to start streaming: %d\n", ret);
+ goto error_return_bufs;
+ }
+
+ spin_lock_irqsave(&ceudev->lock, irqflags);
+ ceudev->sequence = 0;
+
+ /* Grab the first available buffer and trigger the first capture. */
+ buf = list_first_entry(&ceudev->capture, struct ceu_buffer,
+ queue);
+ if (!buf) {
+ spin_unlock_irqrestore(&ceudev->lock, irqflags);
+ dev_dbg(ceudev->dev,
+ "No buffer available for capture.\n");
+ goto error_stop_sensor;
+ }
+
+ list_del(&buf->queue);
+ ceudev->active = &buf->vb;
+
+ /* Clean and program interrupts for first capture. */
+ ceu_write(ceudev, CEU_CETCR, ~ceudev->irq_mask);
+ ceu_write(ceudev, CEU_CEIER, CEU_CEIER_MASK);
+
+ ceu_capture(ceudev);
+
+ spin_unlock_irqrestore(&ceudev->lock, irqflags);
+
+ return 0;
+
+error_stop_sensor:
+ v4l2_subdev_call(v4l2_sd, video, s_stream, 0);
+
+error_return_bufs:
+ spin_lock_irqsave(&ceudev->lock, irqflags);
+ list_for_each_entry(buf, &ceudev->capture, queue)
+ vb2_buffer_done(&ceudev->active->vb2_buf,
+ VB2_BUF_STATE_QUEUED);
+ ceudev->active = NULL;
+ spin_unlock_irqrestore(&ceudev->lock, irqflags);
+
+ return ret;
+}
+
+static void ceu_stop_streaming(struct vb2_queue *vq)
+{
+ struct ceu_device *ceudev = vb2_get_drv_priv(vq);
+ struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd;
+ struct ceu_buffer *buf;
+ unsigned long irqflags;
+
+ /* Clean and disable interrupt sources. */
+ ceu_write(ceudev, CEU_CETCR,
+ ceu_read(ceudev, CEU_CETCR) & ceudev->irq_mask);
+ ceu_write(ceudev, CEU_CEIER, CEU_CEIER_MASK);
+
+ v4l2_subdev_call(v4l2_sd, video, s_stream, 0);
+
+ spin_lock_irqsave(&ceudev->lock, irqflags);
+ if (ceudev->active) {
+ vb2_buffer_done(&ceudev->active->vb2_buf,
+ VB2_BUF_STATE_ERROR);
+ ceudev->active = NULL;
+ }
+
+ /* Release all queued buffers. */
+ list_for_each_entry(buf, &ceudev->capture, queue)
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ INIT_LIST_HEAD(&ceudev->capture);
+
+ spin_unlock_irqrestore(&ceudev->lock, irqflags);
+
+ ceu_soft_reset(ceudev);
+}
+
+static const struct vb2_ops ceu_vb2_ops = {
+ .queue_setup = ceu_vb2_setup,
+ .buf_queue = ceu_vb2_queue,
+ .buf_prepare = ceu_vb2_prepare,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .start_streaming = ceu_start_streaming,
+ .stop_streaming = ceu_stop_streaming,
+};
+
+/* --- CEU image formats handling --- */
+
+/*
+ * ceu_try_fmt() - test format on CEU and sensor
+ * @ceudev: The CEU device.
+ * @v4l2_fmt: format to test.
+ *
+ * Returns 0 for success, < 0 for errors.
+ */
+static int ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
+{
+ struct ceu_subdev *ceu_sd = ceudev->sd;
+ struct v4l2_pix_format_mplane *pix = &v4l2_fmt->fmt.pix_mp;
+ struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
+ struct v4l2_subdev_pad_config pad_cfg;
+ const struct ceu_fmt *ceu_fmt;
+ int ret;
+
+ struct v4l2_subdev_format sd_format = {
+ .which = V4L2_SUBDEV_FORMAT_TRY,
+ };
+
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ break;
+
+ default:
+ pix->pixelformat = V4L2_PIX_FMT_NV16;
+ break;
+ }
+
+ ceu_fmt = get_ceu_fmt_from_fourcc(pix->pixelformat);
+
+ /* CFSZR requires height and width to be 4-pixel aligned. */
+ v4l_bound_align_image(&pix->width, 2, CEU_MAX_WIDTH, 4,
+ &pix->height, 4, CEU_MAX_HEIGHT, 4, 0);
+
+ /*
+ * Set format on sensor sub device: bus format used to produce memory
+ * format is selected at initialization time.
+ */
+ v4l2_fill_mbus_format_mplane(&sd_format.format, pix);
+ ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, &pad_cfg, &sd_format);
+ if (ret)
+ return ret;
+
+ /* Apply size returned by sensor as the CEU can't scale. */
+ v4l2_fill_pix_format_mplane(pix, &sd_format.format);
+
+ /* Calculate per-plane sizes based on image format. */
+ ceu_calc_plane_sizes(ceudev, ceu_fmt, pix);
+
+ return 0;
+}
+
+/*
+ * ceu_set_fmt() - Apply the supplied format to both sensor and CEU
+ */
+static int ceu_set_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
+{
+ struct ceu_subdev *ceu_sd = ceudev->sd;
+ struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
+ int ret;
+
+ struct v4l2_subdev_format format = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+
+ ret = ceu_try_fmt(ceudev, v4l2_fmt);
+ if (ret)
+ return ret;
+
+ v4l2_fill_mbus_format_mplane(&format.format, &v4l2_fmt->fmt.pix_mp);
+ ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, NULL, &format);
+ if (ret)
+ return ret;
+
+ ceudev->v4l2_pix = v4l2_fmt->fmt.pix_mp;
+ ceudev->field = V4L2_FIELD_NONE;
+
+ return 0;
+}
+
+/*
+ * ceu_set_default_fmt() - Apply default NV16 memory output format with VGA
+ * sizes.
+ */
+static int ceu_set_default_fmt(struct ceu_device *ceudev)
+{
+ int ret;
+
+ struct v4l2_format v4l2_fmt = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE,
+ .fmt.pix_mp = {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .field = V4L2_FIELD_NONE,
+ .pixelformat = V4L2_PIX_FMT_NV16,
+ .num_planes = 2,
+ .plane_fmt = {
+ [0] = {
+ .sizeimage = VGA_WIDTH * VGA_HEIGHT * 2,
+ .bytesperline = VGA_WIDTH * 2,
+ },
+ [1] = {
+ .sizeimage = VGA_WIDTH * VGA_HEIGHT * 2,
+ .bytesperline = VGA_WIDTH * 2,
+ },
+ },
+ },
+ };
+
+ ret = ceu_try_fmt(ceudev, &v4l2_fmt);
+ if (ret)
+ return ret;
+
+ ceudev->v4l2_pix = v4l2_fmt.fmt.pix_mp;
+ ceudev->field = V4L2_FIELD_NONE;
+
+ return 0;
+}
+
+/*
+ * ceu_init_mbus_fmt() - Query sensor for supported formats and initialize
+ * CEU media bus format used to produce memory formats.
+ *
+ * Find out if sensor can produce a permutation of 8-bits YUYV bus format.
+ * From a single 8-bits YUYV bus format the CEU can produce several memory
+ * output formats:
+ * - NV[12|21|16|61] through image fetch mode;
+ * - YUYV422 if sensor provides YUYV422
+ *
+ * TODO: Other YUYV422 permutations through data fetch sync mode and DTARY
+ * TODO: Binary data (eg. JPEG) and raw formats through data fetch sync mode
+ */
+static int ceu_init_mbus_fmt(struct ceu_device *ceudev)
+{
+ struct ceu_subdev *ceu_sd = ceudev->sd;
+ struct ceu_mbus_fmt *mbus_fmt = &ceu_sd->mbus_fmt;
+ struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
+ bool yuyv_bus_fmt = false;
+
+ struct v4l2_subdev_mbus_code_enum sd_mbus_fmt = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ .index = 0,
+ };
+
+ /* Find out if sensor can produce any permutation of 8-bits YUYV422. */
+ while (!yuyv_bus_fmt &&
+ !v4l2_subdev_call(v4l2_sd, pad, enum_mbus_code,
+ NULL, &sd_mbus_fmt)) {
+ switch (sd_mbus_fmt.code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ yuyv_bus_fmt = true;
+ break;
+ default:
+ /*
+ * Only support 8-bits YUYV bus formats at the moment;
+ *
+ * TODO: add support for binary formats (data sync
+ * fetch mode).
+ */
+ break;
+ }
+
+ sd_mbus_fmt.index++;
+ }
+
+ if (!yuyv_bus_fmt)
+ return -ENXIO;
+
+ /*
+ * Save the first encountered YUYV format as "mbus_fmt" and use it
+ * to output all planar YUV422 and YUV420 (NV*) formats to memory as
+ * well as for data synch fetch mode (YUYV - YVYU etc. ).
+ */
+ mbus_fmt->mbus_code = sd_mbus_fmt.code;
+ mbus_fmt->bps = 8;
+
+ /* Annotate the selected bus format components ordering. */
+ switch (sd_mbus_fmt.code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_YUYV;
+ mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_YVYU;
+ mbus_fmt->swapped = false;
+ mbus_fmt->bpp = 16;
+ break;
+
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_YVYU;
+ mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_YUYV;
+ mbus_fmt->swapped = true;
+ mbus_fmt->bpp = 16;
+ break;
+
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_UYVY;
+ mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_VYUY;
+ mbus_fmt->swapped = false;
+ mbus_fmt->bpp = 16;
+ break;
+
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_VYUY;
+ mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_UYVY;
+ mbus_fmt->swapped = true;
+ mbus_fmt->bpp = 16;
+ break;
+ }
+
+ return 0;
+}
+
+/* --- Runtime PM Handlers --- */
+
+/*
+ * ceu_runtime_resume() - soft-reset the interface and turn sensor power on.
+ */
+static int ceu_runtime_resume(struct device *dev)
+{
+ struct ceu_device *ceudev = dev_get_drvdata(dev);
+ struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd;
+
+ v4l2_subdev_call(v4l2_sd, core, s_power, 1);
+
+ ceu_soft_reset(ceudev);
+
+ return 0;
+}
+
+/*
+ * ceu_runtime_suspend() - disable capture and interrupts and soft-reset.
+ * Turn sensor power off.
+ */
+static int ceu_runtime_suspend(struct device *dev)
+{
+ struct ceu_device *ceudev = dev_get_drvdata(dev);
+ struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd;
+
+ v4l2_subdev_call(v4l2_sd, core, s_power, 0);
+
+ ceu_write(ceudev, CEU_CEIER, 0);
+ ceu_soft_reset(ceudev);
+
+ return 0;
+}
+
+/* --- File Operations --- */
+
+static int ceu_open(struct file *file)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+ int ret;
+
+ ret = v4l2_fh_open(file);
+ if (ret)
+ return ret;
+
+ mutex_lock(&ceudev->mlock);
+ /* Causes soft-reset and sensor power on on first open */
+ pm_runtime_get_sync(ceudev->dev);
+ mutex_unlock(&ceudev->mlock);
+
+ return 0;
+}
+
+static int ceu_release(struct file *file)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+
+ vb2_fop_release(file);
+
+ mutex_lock(&ceudev->mlock);
+ /* Causes soft-reset and sensor power down on last close */
+ pm_runtime_put(ceudev->dev);
+ mutex_unlock(&ceudev->mlock);
+
+ return 0;
+}
+
+static const struct v4l2_file_operations ceu_fops = {
+ .owner = THIS_MODULE,
+ .open = ceu_open,
+ .release = ceu_release,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = vb2_fop_mmap,
+ .poll = vb2_fop_poll,
+};
+
+/* --- Video Device IOCTLs --- */
+
+static int ceu_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+
+ strlcpy(cap->card, "Renesas CEU", sizeof(cap->card));
+ strlcpy(cap->driver, DRIVER_NAME, sizeof(cap->driver));
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "platform:renesas-ceu-%s", dev_name(ceudev->dev));
+
+ return 0;
+}
+
+static int ceu_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ const struct ceu_fmt *fmt;
+
+ if (f->index >= ARRAY_SIZE(ceu_fmt_list))
+ return -EINVAL;
+
+ fmt = &ceu_fmt_list[f->index];
+ f->pixelformat = fmt->fourcc;
+
+ return 0;
+}
+
+static int ceu_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+
+ return ceu_try_fmt(ceudev, f);
+}
+
+static int ceu_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+
+ if (vb2_is_streaming(&ceudev->vb2_vq))
+ return -EBUSY;
+
+ return ceu_set_fmt(ceudev, f);
+}
+
+static int ceu_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+
+ f->fmt.pix_mp = ceudev->v4l2_pix;
+
+ return 0;
+}
+
+static int ceu_enum_input(struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+ struct ceu_subdev *ceusd;
+
+ if (inp->index >= ceudev->num_sd)
+ return -EINVAL;
+
+ ceusd = &ceudev->subdevs[inp->index];
+
+ inp->type = V4L2_INPUT_TYPE_CAMERA;
+ inp->std = 0;
+ snprintf(inp->name, sizeof(inp->name), "Camera%u: %s",
+ inp->index, ceusd->v4l2_sd->name);
+
+ return 0;
+}
+
+static int ceu_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+
+ *i = ceudev->sd_index;
+
+ return 0;
+}
+
+static int ceu_s_input(struct file *file, void *priv, unsigned int i)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+ struct ceu_subdev *ceu_sd_old;
+ int ret;
+
+ if (i >= ceudev->num_sd)
+ return -EINVAL;
+
+ if (vb2_is_streaming(&ceudev->vb2_vq))
+ return -EBUSY;
+
+ if (i == ceudev->sd_index)
+ return 0;
+
+ ceu_sd_old = ceudev->sd;
+ ceudev->sd = &ceudev->subdevs[i];
+
+ /*
+ * Make sure we can generate output image formats and apply
+ * default one.
+ */
+ ret = ceu_init_mbus_fmt(ceudev);
+ if (ret) {
+ ceudev->sd = ceu_sd_old;
+ return -EINVAL;
+ }
+
+ ret = ceu_set_default_fmt(ceudev);
+ if (ret) {
+ ceudev->sd = ceu_sd_old;
+ return -EINVAL;
+ }
+
+ /* Now that we're sure we can use the sensor, power off the old one. */
+ v4l2_subdev_call(ceu_sd_old->v4l2_sd, core, s_power, 0);
+ v4l2_subdev_call(ceudev->sd->v4l2_sd, core, s_power, 1);
+
+ ceudev->sd_index = i;
+
+ return 0;
+}
+
+static int ceu_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+
+ return v4l2_g_parm_cap(video_devdata(file), ceudev->sd->v4l2_sd, a);
+}
+
+static int ceu_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+
+ return v4l2_s_parm_cap(video_devdata(file), ceudev->sd->v4l2_sd, a);
+}
+
+static int ceu_enum_framesizes(struct file *file, void *fh,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+ struct ceu_subdev *ceu_sd = ceudev->sd;
+ const struct ceu_fmt *ceu_fmt;
+ struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
+ int ret;
+
+ struct v4l2_subdev_frame_size_enum fse = {
+ .code = ceu_sd->mbus_fmt.mbus_code,
+ .index = fsize->index,
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+
+ /* Just check if user supplied pixel format is supported. */
+ ceu_fmt = get_ceu_fmt_from_fourcc(fsize->pixel_format);
+ if (!ceu_fmt)
+ return -EINVAL;
+
+ ret = v4l2_subdev_call(v4l2_sd, pad, enum_frame_size,
+ NULL, &fse);
+ if (ret)
+ return ret;
+
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = CEU_W_MAX(fse.max_width);
+ fsize->discrete.height = CEU_H_MAX(fse.max_height);
+
+ return 0;
+}
+
+static int ceu_enum_frameintervals(struct file *file, void *fh,
+ struct v4l2_frmivalenum *fival)
+{
+ struct ceu_device *ceudev = video_drvdata(file);
+ struct ceu_subdev *ceu_sd = ceudev->sd;
+ const struct ceu_fmt *ceu_fmt;
+ struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
+ int ret;
+
+ struct v4l2_subdev_frame_interval_enum fie = {
+ .code = ceu_sd->mbus_fmt.mbus_code,
+ .index = fival->index,
+ .width = fival->width,
+ .height = fival->height,
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+
+ /* Just check if user supplied pixel format is supported. */
+ ceu_fmt = get_ceu_fmt_from_fourcc(fival->pixel_format);
+ if (!ceu_fmt)
+ return -EINVAL;
+
+ ret = v4l2_subdev_call(v4l2_sd, pad, enum_frame_interval, NULL,
+ &fie);
+ if (ret)
+ return ret;
+
+ fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+ fival->discrete = fie.interval;
+
+ return 0;
+}
+
+static const struct v4l2_ioctl_ops ceu_ioctl_ops = {
+ .vidioc_querycap = ceu_querycap,
+
+ .vidioc_enum_fmt_vid_cap_mplane = ceu_enum_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap_mplane = ceu_try_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap_mplane = ceu_s_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap_mplane = ceu_g_fmt_vid_cap,
+
+ .vidioc_enum_input = ceu_enum_input,
+ .vidioc_g_input = ceu_g_input,
+ .vidioc_s_input = ceu_s_input,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+
+ .vidioc_g_parm = ceu_g_parm,
+ .vidioc_s_parm = ceu_s_parm,
+ .vidioc_enum_framesizes = ceu_enum_framesizes,
+ .vidioc_enum_frameintervals = ceu_enum_frameintervals,
+
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/*
+ * ceu_vdev_release() - release CEU video device memory when last reference
+ * to this driver is closed
+ */
+static void ceu_vdev_release(struct video_device *vdev)
+{
+ struct ceu_device *ceudev = video_get_drvdata(vdev);
+
+ kfree(ceudev);
+}
+
+static int ceu_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *v4l2_sd,
+ struct v4l2_async_subdev *asd)
+{
+ struct v4l2_device *v4l2_dev = notifier->v4l2_dev;
+ struct ceu_device *ceudev = v4l2_to_ceu(v4l2_dev);
+ struct ceu_subdev *ceu_sd = to_ceu_subdev(asd);
+
+ ceu_sd->v4l2_sd = v4l2_sd;
+ ceudev->num_sd++;
+
+ return 0;
+}
+
+static int ceu_notify_complete(struct v4l2_async_notifier *notifier)
+{
+ struct v4l2_device *v4l2_dev = notifier->v4l2_dev;
+ struct ceu_device *ceudev = v4l2_to_ceu(v4l2_dev);
+ struct video_device *vdev = &ceudev->vdev;
+ struct vb2_queue *q = &ceudev->vb2_vq;
+ struct v4l2_subdev *v4l2_sd;
+ int ret;
+
+ /* Initialize vb2 queue. */
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+ q->io_modes = VB2_MMAP | VB2_DMABUF;
+ q->drv_priv = ceudev;
+ q->ops = &ceu_vb2_ops;
+ q->mem_ops = &vb2_dma_contig_memops;
+ q->buf_struct_size = sizeof(struct ceu_buffer);
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->min_buffers_needed = 2;
+ q->lock = &ceudev->mlock;
+ q->dev = ceudev->v4l2_dev.dev;
+
+ ret = vb2_queue_init(q);
+ if (ret)
+ return ret;
+
+ /*
+ * Make sure at least one sensor is primary and use it to initialize
+ * ceu formats.
+ */
+ if (!ceudev->sd) {
+ ceudev->sd = &ceudev->subdevs[0];
+ ceudev->sd_index = 0;
+ }
+
+ v4l2_sd = ceudev->sd->v4l2_sd;
+
+ ret = ceu_init_mbus_fmt(ceudev);
+ if (ret)
+ return ret;
+
+ ret = ceu_set_default_fmt(ceudev);
+ if (ret)
+ return ret;
+
+ /* Register the video device. */
+ strncpy(vdev->name, DRIVER_NAME, strlen(DRIVER_NAME));
+ vdev->v4l2_dev = v4l2_dev;
+ vdev->lock = &ceudev->mlock;
+ vdev->queue = &ceudev->vb2_vq;
+ vdev->ctrl_handler = v4l2_sd->ctrl_handler;
+ vdev->fops = &ceu_fops;
+ vdev->ioctl_ops = &ceu_ioctl_ops;
+ vdev->release = ceu_vdev_release;
+ vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
+ V4L2_CAP_STREAMING;
+ video_set_drvdata(vdev, ceudev);
+
+ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
+ if (ret < 0) {
+ v4l2_err(vdev->v4l2_dev,
+ "video_register_device failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_async_notifier_operations ceu_notify_ops = {
+ .bound = ceu_notify_bound,
+ .complete = ceu_notify_complete,
+};
+
+/*
+ * ceu_init_async_subdevs() - Initialize CEU subdevices and async_subdevs in
+ * ceu device. Both DT and platform data parsing use
+ * this routine.
+ *
+ * Returns 0 for success, -ENOMEM for failure.
+ */
+static int ceu_init_async_subdevs(struct ceu_device *ceudev, unsigned int n_sd)
+{
+ /* Reserve memory for 'n_sd' ceu_subdev descriptors. */
+ ceudev->subdevs = devm_kcalloc(ceudev->dev, n_sd,
+ sizeof(*ceudev->subdevs), GFP_KERNEL);
+ if (!ceudev->subdevs)
+ return -ENOMEM;
+
+ /*
+ * Reserve memory for 'n_sd' pointers to async_subdevices.
+ * ceudev->asds members will point to &ceu_subdev.asd
+ */
+ ceudev->asds = devm_kcalloc(ceudev->dev, n_sd,
+ sizeof(*ceudev->asds), GFP_KERNEL);
+ if (!ceudev->asds)
+ return -ENOMEM;
+
+ ceudev->sd = NULL;
+ ceudev->sd_index = 0;
+ ceudev->num_sd = 0;
+
+ return 0;
+}
+
+/*
+ * ceu_parse_platform_data() - Initialize async_subdevices using platform
+ * device provided data.
+ */
+static int ceu_parse_platform_data(struct ceu_device *ceudev,
+ const struct ceu_platform_data *pdata)
+{
+ const struct ceu_async_subdev *async_sd;
+ struct ceu_subdev *ceu_sd;
+ unsigned int i;
+ int ret;
+
+ if (pdata->num_subdevs == 0)
+ return -ENODEV;
+
+ ret = ceu_init_async_subdevs(ceudev, pdata->num_subdevs);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < pdata->num_subdevs; i++) {
+ /* Setup the ceu subdevice and the async subdevice. */
+ async_sd = &pdata->subdevs[i];
+ ceu_sd = &ceudev->subdevs[i];
+
+ INIT_LIST_HEAD(&ceu_sd->asd.list);
+
+ ceu_sd->mbus_flags = async_sd->flags;
+ ceu_sd->asd.match_type = V4L2_ASYNC_MATCH_I2C;
+ ceu_sd->asd.match.i2c.adapter_id = async_sd->i2c_adapter_id;
+ ceu_sd->asd.match.i2c.address = async_sd->i2c_address;
+
+ ceudev->asds[i] = &ceu_sd->asd;
+ }
+
+ return pdata->num_subdevs;
+}
+
+/*
+ * ceu_parse_dt() - Initialize async_subdevs parsing device tree graph.
+ */
+static int ceu_parse_dt(struct ceu_device *ceudev)
+{
+ struct device_node *of = ceudev->dev->of_node;
+ struct v4l2_fwnode_endpoint fw_ep;
+ struct ceu_subdev *ceu_sd;
+ struct device_node *ep;
+ unsigned int i;
+ int num_ep;
+ int ret;
+
+ num_ep = of_graph_get_endpoint_count(of);
+ if (!num_ep)
+ return -ENODEV;
+
+ ret = ceu_init_async_subdevs(ceudev, num_ep);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < num_ep; i++) {
+ ep = of_graph_get_endpoint_by_regs(of, 0, i);
+ if (!ep) {
+ dev_err(ceudev->dev,
+ "No subdevice connected on endpoint %u.\n", i);
+ ret = -ENODEV;
+ goto error_put_node;
+ }
+
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &fw_ep);
+ if (ret) {
+ dev_err(ceudev->dev,
+ "Unable to parse endpoint #%u.\n", i);
+ goto error_put_node;
+ }
+
+ if (fw_ep.bus_type != V4L2_MBUS_PARALLEL) {
+ dev_err(ceudev->dev,
+ "Only parallel input supported.\n");
+ ret = -EINVAL;
+ goto error_put_node;
+ }
+
+ /* Setup the ceu subdevice and the async subdevice. */
+ ceu_sd = &ceudev->subdevs[i];
+ INIT_LIST_HEAD(&ceu_sd->asd.list);
+
+ ceu_sd->mbus_flags = fw_ep.bus.parallel.flags;
+ ceu_sd->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+ ceu_sd->asd.match.fwnode =
+ fwnode_graph_get_remote_port_parent(
+ of_fwnode_handle(ep));
+
+ ceudev->asds[i] = &ceu_sd->asd;
+ of_node_put(ep);
+ }
+
+ return num_ep;
+
+error_put_node:
+ of_node_put(ep);
+ return ret;
+}
+
+/*
+ * struct ceu_data - Platform specific CEU data
+ * @irq_mask: CETCR mask with all interrupt sources enabled. The mask differs
+ * between SH4 and RZ platforms.
+ */
+struct ceu_data {
+ u32 irq_mask;
+};
+
+static const struct ceu_data ceu_data_rz = {
+ .irq_mask = CEU_CETCR_ALL_IRQS_RZ,
+};
+
+static const struct ceu_data ceu_data_sh4 = {
+ .irq_mask = CEU_CETCR_ALL_IRQS_SH4,
+};
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id ceu_of_match[] = {
+ { .compatible = "renesas,r7s72100-ceu", .data = &ceu_data_rz },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ceu_of_match);
+#endif
+
+static int ceu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct ceu_data *ceu_data;
+ struct ceu_device *ceudev;
+ struct resource *res;
+ unsigned int irq;
+ int num_subdevs;
+ int ret;
+
+ ceudev = kzalloc(sizeof(*ceudev), GFP_KERNEL);
+ if (!ceudev)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ceudev);
+ ceudev->dev = dev;
+
+ INIT_LIST_HEAD(&ceudev->capture);
+ spin_lock_init(&ceudev->lock);
+ mutex_init(&ceudev->mlock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ceudev->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ceudev->base))
+ goto error_free_ceudev;
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get irq: %d\n", ret);
+ goto error_free_ceudev;
+ }
+ irq = ret;
+
+ ret = devm_request_irq(dev, irq, ceu_irq,
+ 0, dev_name(dev), ceudev);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to request CEU interrupt.\n");
+ goto error_free_ceudev;
+ }
+
+ pm_runtime_enable(dev);
+
+ ret = v4l2_device_register(dev, &ceudev->v4l2_dev);
+ if (ret)
+ goto error_pm_disable;
+
+ if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+ ceu_data = of_match_device(ceu_of_match, dev)->data;
+ num_subdevs = ceu_parse_dt(ceudev);
+ } else if (dev->platform_data) {
+ /* Assume SH4 if booting with platform data. */
+ ceu_data = &ceu_data_sh4;
+ num_subdevs = ceu_parse_platform_data(ceudev,
+ dev->platform_data);
+ } else {
+ num_subdevs = -EINVAL;
+ }
+
+ if (num_subdevs < 0) {
+ ret = num_subdevs;
+ goto error_v4l2_unregister;
+ }
+ ceudev->irq_mask = ceu_data->irq_mask;
+
+ ceudev->notifier.v4l2_dev = &ceudev->v4l2_dev;
+ ceudev->notifier.subdevs = ceudev->asds;
+ ceudev->notifier.num_subdevs = num_subdevs;
+ ceudev->notifier.ops = &ceu_notify_ops;
+ ret = v4l2_async_notifier_register(&ceudev->v4l2_dev,
+ &ceudev->notifier);
+ if (ret)
+ goto error_v4l2_unregister;
+
+ dev_info(dev, "Renesas Capture Engine Unit %s\n", dev_name(dev));
+
+ return 0;
+
+error_v4l2_unregister:
+ v4l2_device_unregister(&ceudev->v4l2_dev);
+error_pm_disable:
+ pm_runtime_disable(dev);
+error_free_ceudev:
+ kfree(ceudev);
+
+ return ret;
+}
+
+static int ceu_remove(struct platform_device *pdev)
+{
+ struct ceu_device *ceudev = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(ceudev->dev);
+
+ v4l2_async_notifier_unregister(&ceudev->notifier);
+
+ v4l2_device_unregister(&ceudev->v4l2_dev);
+
+ video_unregister_device(&ceudev->vdev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops ceu_pm_ops = {
+ SET_RUNTIME_PM_OPS(ceu_runtime_suspend,
+ ceu_runtime_resume,
+ NULL)
+};
+
+static struct platform_driver ceu_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .pm = &ceu_pm_ops,
+ .of_match_table = of_match_ptr(ceu_of_match),
+ },
+ .probe = ceu_probe,
+ .remove = ceu_remove,
+};
+
+module_platform_driver(ceu_driver);
+
+MODULE_DESCRIPTION("Renesas CEU camera driver");
+MODULE_AUTHOR("Jacopo Mondi <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Copy the soc_camera based driver in v4l2 sensor driver directory.
This commit just copies the original file without modifying it.
No modification to KConfig and Makefile as soc_camera framework
dependencies need to be removed first in next commit.
Signed-off-by: Jacopo Mondi <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
---
drivers/media/i2c/ov772x.c | 1124 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 1124 insertions(+)
create mode 100644 drivers/media/i2c/ov772x.c
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
new file mode 100644
index 0000000..8063835
--- /dev/null
+++ b/drivers/media/i2c/ov772x.c
@@ -0,0 +1,1124 @@
+/*
+ * ov772x Camera Driver
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <[email protected]>
+ *
+ * Based on ov7670 and soc_camera_platform driver,
+ *
+ * Copyright 2006-7 Jonathan Corbet <[email protected]>
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2008, Guennadi Liakhovetski <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/videodev2.h>
+
+#include <media/i2c/ov772x.h>
+#include <media/soc_camera.h>
+#include <media/v4l2-clk.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-image-sizes.h>
+
+/*
+ * register offset
+ */
+#define GAIN 0x00 /* AGC - Gain control gain setting */
+#define BLUE 0x01 /* AWB - Blue channel gain setting */
+#define RED 0x02 /* AWB - Red channel gain setting */
+#define GREEN 0x03 /* AWB - Green channel gain setting */
+#define COM1 0x04 /* Common control 1 */
+#define BAVG 0x05 /* U/B Average Level */
+#define GAVG 0x06 /* Y/Gb Average Level */
+#define RAVG 0x07 /* V/R Average Level */
+#define AECH 0x08 /* Exposure Value - AEC MSBs */
+#define COM2 0x09 /* Common control 2 */
+#define PID 0x0A /* Product ID Number MSB */
+#define VER 0x0B /* Product ID Number LSB */
+#define COM3 0x0C /* Common control 3 */
+#define COM4 0x0D /* Common control 4 */
+#define COM5 0x0E /* Common control 5 */
+#define COM6 0x0F /* Common control 6 */
+#define AEC 0x10 /* Exposure Value */
+#define CLKRC 0x11 /* Internal clock */
+#define COM7 0x12 /* Common control 7 */
+#define COM8 0x13 /* Common control 8 */
+#define COM9 0x14 /* Common control 9 */
+#define COM10 0x15 /* Common control 10 */
+#define REG16 0x16 /* Register 16 */
+#define HSTART 0x17 /* Horizontal sensor size */
+#define HSIZE 0x18 /* Horizontal frame (HREF column) end high 8-bit */
+#define VSTART 0x19 /* Vertical frame (row) start high 8-bit */
+#define VSIZE 0x1A /* Vertical sensor size */
+#define PSHFT 0x1B /* Data format - pixel delay select */
+#define MIDH 0x1C /* Manufacturer ID byte - high */
+#define MIDL 0x1D /* Manufacturer ID byte - low */
+#define LAEC 0x1F /* Fine AEC value */
+#define COM11 0x20 /* Common control 11 */
+#define BDBASE 0x22 /* Banding filter Minimum AEC value */
+#define DBSTEP 0x23 /* Banding filter Maximum Setp */
+#define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */
+#define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */
+#define VPT 0x26 /* AGC/AEC Fast mode operating region */
+#define REG28 0x28 /* Register 28 */
+#define HOUTSIZE 0x29 /* Horizontal data output size MSBs */
+#define EXHCH 0x2A /* Dummy pixel insert MSB */
+#define EXHCL 0x2B /* Dummy pixel insert LSB */
+#define VOUTSIZE 0x2C /* Vertical data output size MSBs */
+#define ADVFL 0x2D /* LSB of insert dummy lines in Vertical direction */
+#define ADVFH 0x2E /* MSG of insert dummy lines in Vertical direction */
+#define YAVE 0x2F /* Y/G Channel Average value */
+#define LUMHTH 0x30 /* Histogram AEC/AGC Luminance high level threshold */
+#define LUMLTH 0x31 /* Histogram AEC/AGC Luminance low level threshold */
+#define HREF 0x32 /* Image start and size control */
+#define DM_LNL 0x33 /* Dummy line low 8 bits */
+#define DM_LNH 0x34 /* Dummy line high 8 bits */
+#define ADOFF_B 0x35 /* AD offset compensation value for B channel */
+#define ADOFF_R 0x36 /* AD offset compensation value for R channel */
+#define ADOFF_GB 0x37 /* AD offset compensation value for Gb channel */
+#define ADOFF_GR 0x38 /* AD offset compensation value for Gr channel */
+#define OFF_B 0x39 /* Analog process B channel offset value */
+#define OFF_R 0x3A /* Analog process R channel offset value */
+#define OFF_GB 0x3B /* Analog process Gb channel offset value */
+#define OFF_GR 0x3C /* Analog process Gr channel offset value */
+#define COM12 0x3D /* Common control 12 */
+#define COM13 0x3E /* Common control 13 */
+#define COM14 0x3F /* Common control 14 */
+#define COM15 0x40 /* Common control 15*/
+#define COM16 0x41 /* Common control 16 */
+#define TGT_B 0x42 /* BLC blue channel target value */
+#define TGT_R 0x43 /* BLC red channel target value */
+#define TGT_GB 0x44 /* BLC Gb channel target value */
+#define TGT_GR 0x45 /* BLC Gr channel target value */
+/* for ov7720 */
+#define LCC0 0x46 /* Lens correction control 0 */
+#define LCC1 0x47 /* Lens correction option 1 - X coordinate */
+#define LCC2 0x48 /* Lens correction option 2 - Y coordinate */
+#define LCC3 0x49 /* Lens correction option 3 */
+#define LCC4 0x4A /* Lens correction option 4 - radius of the circular */
+#define LCC5 0x4B /* Lens correction option 5 */
+#define LCC6 0x4C /* Lens correction option 6 */
+/* for ov7725 */
+#define LC_CTR 0x46 /* Lens correction control */
+#define LC_XC 0x47 /* X coordinate of lens correction center relative */
+#define LC_YC 0x48 /* Y coordinate of lens correction center relative */
+#define LC_COEF 0x49 /* Lens correction coefficient */
+#define LC_RADI 0x4A /* Lens correction radius */
+#define LC_COEFB 0x4B /* Lens B channel compensation coefficient */
+#define LC_COEFR 0x4C /* Lens R channel compensation coefficient */
+
+#define FIXGAIN 0x4D /* Analog fix gain amplifer */
+#define AREF0 0x4E /* Sensor reference control */
+#define AREF1 0x4F /* Sensor reference current control */
+#define AREF2 0x50 /* Analog reference control */
+#define AREF3 0x51 /* ADC reference control */
+#define AREF4 0x52 /* ADC reference control */
+#define AREF5 0x53 /* ADC reference control */
+#define AREF6 0x54 /* Analog reference control */
+#define AREF7 0x55 /* Analog reference control */
+#define UFIX 0x60 /* U channel fixed value output */
+#define VFIX 0x61 /* V channel fixed value output */
+#define AWBB_BLK 0x62 /* AWB option for advanced AWB */
+#define AWB_CTRL0 0x63 /* AWB control byte 0 */
+#define DSP_CTRL1 0x64 /* DSP control byte 1 */
+#define DSP_CTRL2 0x65 /* DSP control byte 2 */
+#define DSP_CTRL3 0x66 /* DSP control byte 3 */
+#define DSP_CTRL4 0x67 /* DSP control byte 4 */
+#define AWB_BIAS 0x68 /* AWB BLC level clip */
+#define AWB_CTRL1 0x69 /* AWB control 1 */
+#define AWB_CTRL2 0x6A /* AWB control 2 */
+#define AWB_CTRL3 0x6B /* AWB control 3 */
+#define AWB_CTRL4 0x6C /* AWB control 4 */
+#define AWB_CTRL5 0x6D /* AWB control 5 */
+#define AWB_CTRL6 0x6E /* AWB control 6 */
+#define AWB_CTRL7 0x6F /* AWB control 7 */
+#define AWB_CTRL8 0x70 /* AWB control 8 */
+#define AWB_CTRL9 0x71 /* AWB control 9 */
+#define AWB_CTRL10 0x72 /* AWB control 10 */
+#define AWB_CTRL11 0x73 /* AWB control 11 */
+#define AWB_CTRL12 0x74 /* AWB control 12 */
+#define AWB_CTRL13 0x75 /* AWB control 13 */
+#define AWB_CTRL14 0x76 /* AWB control 14 */
+#define AWB_CTRL15 0x77 /* AWB control 15 */
+#define AWB_CTRL16 0x78 /* AWB control 16 */
+#define AWB_CTRL17 0x79 /* AWB control 17 */
+#define AWB_CTRL18 0x7A /* AWB control 18 */
+#define AWB_CTRL19 0x7B /* AWB control 19 */
+#define AWB_CTRL20 0x7C /* AWB control 20 */
+#define AWB_CTRL21 0x7D /* AWB control 21 */
+#define GAM1 0x7E /* Gamma Curve 1st segment input end point */
+#define GAM2 0x7F /* Gamma Curve 2nd segment input end point */
+#define GAM3 0x80 /* Gamma Curve 3rd segment input end point */
+#define GAM4 0x81 /* Gamma Curve 4th segment input end point */
+#define GAM5 0x82 /* Gamma Curve 5th segment input end point */
+#define GAM6 0x83 /* Gamma Curve 6th segment input end point */
+#define GAM7 0x84 /* Gamma Curve 7th segment input end point */
+#define GAM8 0x85 /* Gamma Curve 8th segment input end point */
+#define GAM9 0x86 /* Gamma Curve 9th segment input end point */
+#define GAM10 0x87 /* Gamma Curve 10th segment input end point */
+#define GAM11 0x88 /* Gamma Curve 11th segment input end point */
+#define GAM12 0x89 /* Gamma Curve 12th segment input end point */
+#define GAM13 0x8A /* Gamma Curve 13th segment input end point */
+#define GAM14 0x8B /* Gamma Curve 14th segment input end point */
+#define GAM15 0x8C /* Gamma Curve 15th segment input end point */
+#define SLOP 0x8D /* Gamma curve highest segment slope */
+#define DNSTH 0x8E /* De-noise threshold */
+#define EDGE_STRNGT 0x8F /* Edge strength control when manual mode */
+#define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */
+#define DNSOFF 0x91 /* Auto De-noise threshold control */
+#define EDGE_UPPER 0x92 /* Edge strength upper limit when Auto mode */
+#define EDGE_LOWER 0x93 /* Edge strength lower limit when Auto mode */
+#define MTX1 0x94 /* Matrix coefficient 1 */
+#define MTX2 0x95 /* Matrix coefficient 2 */
+#define MTX3 0x96 /* Matrix coefficient 3 */
+#define MTX4 0x97 /* Matrix coefficient 4 */
+#define MTX5 0x98 /* Matrix coefficient 5 */
+#define MTX6 0x99 /* Matrix coefficient 6 */
+#define MTX_CTRL 0x9A /* Matrix control */
+#define BRIGHT 0x9B /* Brightness control */
+#define CNTRST 0x9C /* Contrast contrast */
+#define CNTRST_CTRL 0x9D /* Contrast contrast center */
+#define UVAD_J0 0x9E /* Auto UV adjust contrast 0 */
+#define UVAD_J1 0x9F /* Auto UV adjust contrast 1 */
+#define SCAL0 0xA0 /* Scaling control 0 */
+#define SCAL1 0xA1 /* Scaling control 1 */
+#define SCAL2 0xA2 /* Scaling control 2 */
+#define FIFODLYM 0xA3 /* FIFO manual mode delay control */
+#define FIFODLYA 0xA4 /* FIFO auto mode delay control */
+#define SDE 0xA6 /* Special digital effect control */
+#define USAT 0xA7 /* U component saturation control */
+#define VSAT 0xA8 /* V component saturation control */
+/* for ov7720 */
+#define HUE0 0xA9 /* Hue control 0 */
+#define HUE1 0xAA /* Hue control 1 */
+/* for ov7725 */
+#define HUECOS 0xA9 /* Cosine value */
+#define HUESIN 0xAA /* Sine value */
+
+#define SIGN 0xAB /* Sign bit for Hue and contrast */
+#define DSPAUTO 0xAC /* DSP auto function ON/OFF control */
+
+/*
+ * register detail
+ */
+
+/* COM2 */
+#define SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */
+ /* Output drive capability */
+#define OCAP_1x 0x00 /* 1x */
+#define OCAP_2x 0x01 /* 2x */
+#define OCAP_3x 0x02 /* 3x */
+#define OCAP_4x 0x03 /* 4x */
+
+/* COM3 */
+#define SWAP_MASK (SWAP_RGB | SWAP_YUV | SWAP_ML)
+#define IMG_MASK (VFLIP_IMG | HFLIP_IMG)
+
+#define VFLIP_IMG 0x80 /* Vertical flip image ON/OFF selection */
+#define HFLIP_IMG 0x40 /* Horizontal mirror image ON/OFF selection */
+#define SWAP_RGB 0x20 /* Swap B/R output sequence in RGB mode */
+#define SWAP_YUV 0x10 /* Swap Y/UV output sequence in YUV mode */
+#define SWAP_ML 0x08 /* Swap output MSB/LSB */
+ /* Tri-state option for output clock */
+#define NOTRI_CLOCK 0x04 /* 0: Tri-state at this period */
+ /* 1: No tri-state at this period */
+ /* Tri-state option for output data */
+#define NOTRI_DATA 0x02 /* 0: Tri-state at this period */
+ /* 1: No tri-state at this period */
+#define SCOLOR_TEST 0x01 /* Sensor color bar test pattern */
+
+/* COM4 */
+ /* PLL frequency control */
+#define PLL_BYPASS 0x00 /* 00: Bypass PLL */
+#define PLL_4x 0x40 /* 01: PLL 4x */
+#define PLL_6x 0x80 /* 10: PLL 6x */
+#define PLL_8x 0xc0 /* 11: PLL 8x */
+ /* AEC evaluate window */
+#define AEC_FULL 0x00 /* 00: Full window */
+#define AEC_1p2 0x10 /* 01: 1/2 window */
+#define AEC_1p4 0x20 /* 10: 1/4 window */
+#define AEC_2p3 0x30 /* 11: Low 2/3 window */
+
+/* COM5 */
+#define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
+#define AFR_SPPED 0x40 /* Auto frame rate control speed selection */
+ /* Auto frame rate max rate control */
+#define AFR_NO_RATE 0x00 /* No reduction of frame rate */
+#define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */
+#define AFR_1p4 0x20 /* Max reduction to 1/4 frame rate */
+#define AFR_1p8 0x30 /* Max reduction to 1/8 frame rate */
+ /* Auto frame rate active point control */
+#define AF_2x 0x00 /* Add frame when AGC reaches 2x gain */
+#define AF_4x 0x04 /* Add frame when AGC reaches 4x gain */
+#define AF_8x 0x08 /* Add frame when AGC reaches 8x gain */
+#define AF_16x 0x0c /* Add frame when AGC reaches 16x gain */
+ /* AEC max step control */
+#define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */
+ /* 1 : No limit to AEC increase step */
+
+/* COM7 */
+ /* SCCB Register Reset */
+#define SCCB_RESET 0x80 /* 0 : No change */
+ /* 1 : Resets all registers to default */
+ /* Resolution selection */
+#define SLCT_MASK 0x40 /* Mask of VGA or QVGA */
+#define SLCT_VGA 0x00 /* 0 : VGA */
+#define SLCT_QVGA 0x40 /* 1 : QVGA */
+#define ITU656_ON_OFF 0x20 /* ITU656 protocol ON/OFF selection */
+#define SENSOR_RAW 0x10 /* Sensor RAW */
+ /* RGB output format control */
+#define FMT_MASK 0x0c /* Mask of color format */
+#define FMT_GBR422 0x00 /* 00 : GBR 4:2:2 */
+#define FMT_RGB565 0x04 /* 01 : RGB 565 */
+#define FMT_RGB555 0x08 /* 10 : RGB 555 */
+#define FMT_RGB444 0x0c /* 11 : RGB 444 */
+ /* Output format control */
+#define OFMT_MASK 0x03 /* Mask of output format */
+#define OFMT_YUV 0x00 /* 00 : YUV */
+#define OFMT_P_BRAW 0x01 /* 01 : Processed Bayer RAW */
+#define OFMT_RGB 0x02 /* 10 : RGB */
+#define OFMT_BRAW 0x03 /* 11 : Bayer RAW */
+
+/* COM8 */
+#define FAST_ALGO 0x80 /* Enable fast AGC/AEC algorithm */
+ /* AEC Setp size limit */
+#define UNLMT_STEP 0x40 /* 0 : Step size is limited */
+ /* 1 : Unlimited step size */
+#define BNDF_ON_OFF 0x20 /* Banding filter ON/OFF */
+#define AEC_BND 0x10 /* Enable AEC below banding value */
+#define AEC_ON_OFF 0x08 /* Fine AEC ON/OFF control */
+#define AGC_ON 0x04 /* AGC Enable */
+#define AWB_ON 0x02 /* AWB Enable */
+#define AEC_ON 0x01 /* AEC Enable */
+
+/* COM9 */
+#define BASE_AECAGC 0x80 /* Histogram or average based AEC/AGC */
+ /* Automatic gain ceiling - maximum AGC value */
+#define GAIN_2x 0x00 /* 000 : 2x */
+#define GAIN_4x 0x10 /* 001 : 4x */
+#define GAIN_8x 0x20 /* 010 : 8x */
+#define GAIN_16x 0x30 /* 011 : 16x */
+#define GAIN_32x 0x40 /* 100 : 32x */
+#define GAIN_64x 0x50 /* 101 : 64x */
+#define GAIN_128x 0x60 /* 110 : 128x */
+#define DROP_VSYNC 0x04 /* Drop VSYNC output of corrupt frame */
+#define DROP_HREF 0x02 /* Drop HREF output of corrupt frame */
+
+/* COM11 */
+#define SGLF_ON_OFF 0x02 /* Single frame ON/OFF selection */
+#define SGLF_TRIG 0x01 /* Single frame transfer trigger */
+
+/* HREF */
+#define HREF_VSTART_SHIFT 6 /* VSTART LSB */
+#define HREF_HSTART_SHIFT 4 /* HSTART 2 LSBs */
+#define HREF_VSIZE_SHIFT 2 /* VSIZE LSB */
+#define HREF_HSIZE_SHIFT 0 /* HSIZE 2 LSBs */
+
+/* EXHCH */
+#define EXHCH_VSIZE_SHIFT 2 /* VOUTSIZE LSB */
+#define EXHCH_HSIZE_SHIFT 0 /* HOUTSIZE 2 LSBs */
+
+/* DSP_CTRL1 */
+#define FIFO_ON 0x80 /* FIFO enable/disable selection */
+#define UV_ON_OFF 0x40 /* UV adjust function ON/OFF selection */
+#define YUV444_2_422 0x20 /* YUV444 to 422 UV channel option selection */
+#define CLR_MTRX_ON_OFF 0x10 /* Color matrix ON/OFF selection */
+#define INTPLT_ON_OFF 0x08 /* Interpolation ON/OFF selection */
+#define GMM_ON_OFF 0x04 /* Gamma function ON/OFF selection */
+#define AUTO_BLK_ON_OFF 0x02 /* Black defect auto correction ON/OFF */
+#define AUTO_WHT_ON_OFF 0x01 /* White define auto correction ON/OFF */
+
+/* DSP_CTRL3 */
+#define UV_MASK 0x80 /* UV output sequence option */
+#define UV_ON 0x80 /* ON */
+#define UV_OFF 0x00 /* OFF */
+#define CBAR_MASK 0x20 /* DSP Color bar mask */
+#define CBAR_ON 0x20 /* ON */
+#define CBAR_OFF 0x00 /* OFF */
+
+/* DSP_CTRL4 */
+#define DSP_OFMT_YUV 0x00
+#define DSP_OFMT_RGB 0x00
+#define DSP_OFMT_RAW8 0x02
+#define DSP_OFMT_RAW10 0x03
+
+/* DSPAUTO (DSP Auto Function ON/OFF Control) */
+#define AWB_ACTRL 0x80 /* AWB auto threshold control */
+#define DENOISE_ACTRL 0x40 /* De-noise auto threshold control */
+#define EDGE_ACTRL 0x20 /* Edge enhancement auto strength control */
+#define UV_ACTRL 0x10 /* UV adjust auto slope control */
+#define SCAL0_ACTRL 0x08 /* Auto scaling factor control */
+#define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */
+
+#define OV772X_MAX_WIDTH VGA_WIDTH
+#define OV772X_MAX_HEIGHT VGA_HEIGHT
+
+/*
+ * ID
+ */
+#define OV7720 0x7720
+#define OV7725 0x7721
+#define VERSION(pid, ver) ((pid<<8)|(ver&0xFF))
+
+/*
+ * struct
+ */
+
+struct ov772x_color_format {
+ u32 code;
+ enum v4l2_colorspace colorspace;
+ u8 dsp3;
+ u8 dsp4;
+ u8 com3;
+ u8 com7;
+};
+
+struct ov772x_win_size {
+ char *name;
+ unsigned char com7_bit;
+ struct v4l2_rect rect;
+};
+
+struct ov772x_priv {
+ struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
+ struct v4l2_clk *clk;
+ struct ov772x_camera_info *info;
+ const struct ov772x_color_format *cfmt;
+ const struct ov772x_win_size *win;
+ unsigned short flag_vflip:1;
+ unsigned short flag_hflip:1;
+ /* band_filter = COM8[5] ? 256 - BDBASE : 0 */
+ unsigned short band_filter;
+};
+
+/*
+ * supported color format list
+ */
+static const struct ov772x_color_format ov772x_cfmts[] = {
+ {
+ .code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .dsp3 = 0x0,
+ .dsp4 = DSP_OFMT_YUV,
+ .com3 = SWAP_YUV,
+ .com7 = OFMT_YUV,
+ },
+ {
+ .code = MEDIA_BUS_FMT_YVYU8_2X8,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .dsp3 = UV_ON,
+ .dsp4 = DSP_OFMT_YUV,
+ .com3 = SWAP_YUV,
+ .com7 = OFMT_YUV,
+ },
+ {
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .dsp3 = 0x0,
+ .dsp4 = DSP_OFMT_YUV,
+ .com3 = 0x0,
+ .com7 = OFMT_YUV,
+ },
+ {
+ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .dsp3 = 0x0,
+ .dsp4 = DSP_OFMT_YUV,
+ .com3 = SWAP_RGB,
+ .com7 = FMT_RGB555 | OFMT_RGB,
+ },
+ {
+ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .dsp3 = 0x0,
+ .dsp4 = DSP_OFMT_YUV,
+ .com3 = 0x0,
+ .com7 = FMT_RGB555 | OFMT_RGB,
+ },
+ {
+ .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .dsp3 = 0x0,
+ .dsp4 = DSP_OFMT_YUV,
+ .com3 = SWAP_RGB,
+ .com7 = FMT_RGB565 | OFMT_RGB,
+ },
+ {
+ .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .dsp3 = 0x0,
+ .dsp4 = DSP_OFMT_YUV,
+ .com3 = 0x0,
+ .com7 = FMT_RGB565 | OFMT_RGB,
+ },
+ {
+ /* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output,
+ * regardless of the COM7 value. We can thus only support 10-bit
+ * Bayer until someone figures it out.
+ */
+ .code = MEDIA_BUS_FMT_SBGGR10_1X10,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .dsp3 = 0x0,
+ .dsp4 = DSP_OFMT_RAW10,
+ .com3 = 0x0,
+ .com7 = SENSOR_RAW | OFMT_BRAW,
+ },
+};
+
+
+/*
+ * window size list
+ */
+
+static const struct ov772x_win_size ov772x_win_sizes[] = {
+ {
+ .name = "VGA",
+ .com7_bit = SLCT_VGA,
+ .rect = {
+ .left = 140,
+ .top = 14,
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ },
+ }, {
+ .name = "QVGA",
+ .com7_bit = SLCT_QVGA,
+ .rect = {
+ .left = 252,
+ .top = 6,
+ .width = QVGA_WIDTH,
+ .height = QVGA_HEIGHT,
+ },
+ },
+};
+
+/*
+ * general function
+ */
+
+static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ov772x_priv, subdev);
+}
+
+static inline int ov772x_read(struct i2c_client *client, u8 addr)
+{
+ return i2c_smbus_read_byte_data(client, addr);
+}
+
+static inline int ov772x_write(struct i2c_client *client, u8 addr, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, addr, value);
+}
+
+static int ov772x_mask_set(struct i2c_client *client, u8 command, u8 mask,
+ u8 set)
+{
+ s32 val = ov772x_read(client, command);
+ if (val < 0)
+ return val;
+
+ val &= ~mask;
+ val |= set & mask;
+
+ return ov772x_write(client, command, val);
+}
+
+static int ov772x_reset(struct i2c_client *client)
+{
+ int ret;
+
+ ret = ov772x_write(client, COM7, SCCB_RESET);
+ if (ret < 0)
+ return ret;
+
+ msleep(1);
+
+ return ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
+}
+
+/*
+ * soc_camera_ops function
+ */
+
+static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct ov772x_priv *priv = to_ov772x(sd);
+
+ if (!enable) {
+ ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
+ return 0;
+ }
+
+ ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0);
+
+ dev_dbg(&client->dev, "format %d, win %s\n",
+ priv->cfmt->code, priv->win->name);
+
+ return 0;
+}
+
+static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct ov772x_priv *priv = container_of(ctrl->handler,
+ struct ov772x_priv, hdl);
+ struct v4l2_subdev *sd = &priv->subdev;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret = 0;
+ u8 val;
+
+ switch (ctrl->id) {
+ case V4L2_CID_VFLIP:
+ val = ctrl->val ? VFLIP_IMG : 0x00;
+ priv->flag_vflip = ctrl->val;
+ if (priv->info->flags & OV772X_FLAG_VFLIP)
+ val ^= VFLIP_IMG;
+ return ov772x_mask_set(client, COM3, VFLIP_IMG, val);
+ case V4L2_CID_HFLIP:
+ val = ctrl->val ? HFLIP_IMG : 0x00;
+ priv->flag_hflip = ctrl->val;
+ if (priv->info->flags & OV772X_FLAG_HFLIP)
+ val ^= HFLIP_IMG;
+ return ov772x_mask_set(client, COM3, HFLIP_IMG, val);
+ case V4L2_CID_BAND_STOP_FILTER:
+ if (!ctrl->val) {
+ /* Switch the filter off, it is on now */
+ ret = ov772x_mask_set(client, BDBASE, 0xff, 0xff);
+ if (!ret)
+ ret = ov772x_mask_set(client, COM8,
+ BNDF_ON_OFF, 0);
+ } else {
+ /* Switch the filter on, set AEC low limit */
+ val = 256 - ctrl->val;
+ ret = ov772x_mask_set(client, COM8,
+ BNDF_ON_OFF, BNDF_ON_OFF);
+ if (!ret)
+ ret = ov772x_mask_set(client, BDBASE,
+ 0xff, val);
+ }
+ if (!ret)
+ priv->band_filter = ctrl->val;
+ return ret;
+ }
+
+ return -EINVAL;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov772x_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+
+ reg->size = 1;
+ if (reg->reg > 0xff)
+ return -EINVAL;
+
+ ret = ov772x_read(client, reg->reg);
+ if (ret < 0)
+ return ret;
+
+ reg->val = (__u64)ret;
+
+ return 0;
+}
+
+static int ov772x_s_register(struct v4l2_subdev *sd,
+ const struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (reg->reg > 0xff ||
+ reg->val > 0xff)
+ return -EINVAL;
+
+ return ov772x_write(client, reg->reg, reg->val);
+}
+#endif
+
+static int ov772x_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+ struct ov772x_priv *priv = to_ov772x(sd);
+
+ return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
+}
+
+static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
+{
+ const struct ov772x_win_size *win = &ov772x_win_sizes[0];
+ u32 best_diff = UINT_MAX;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) {
+ u32 diff = abs(width - ov772x_win_sizes[i].rect.width)
+ + abs(height - ov772x_win_sizes[i].rect.height);
+ if (diff < best_diff) {
+ best_diff = diff;
+ win = &ov772x_win_sizes[i];
+ }
+ }
+
+ return win;
+}
+
+static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf,
+ const struct ov772x_color_format **cfmt,
+ const struct ov772x_win_size **win)
+{
+ unsigned int i;
+
+ /* Select a format. */
+ *cfmt = &ov772x_cfmts[0];
+
+ for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) {
+ if (mf->code == ov772x_cfmts[i].code) {
+ *cfmt = &ov772x_cfmts[i];
+ break;
+ }
+ }
+
+ /* Select a window size. */
+ *win = ov772x_select_win(mf->width, mf->height);
+}
+
+static int ov772x_set_params(struct ov772x_priv *priv,
+ const struct ov772x_color_format *cfmt,
+ const struct ov772x_win_size *win)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ int ret;
+ u8 val;
+
+ /*
+ * reset hardware
+ */
+ ov772x_reset(client);
+
+ /*
+ * Edge Ctrl
+ */
+ if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) {
+
+ /*
+ * Manual Edge Control Mode
+ *
+ * Edge auto strength bit is set by default.
+ * Remove it when manual mode.
+ */
+
+ ret = ov772x_mask_set(client, DSPAUTO, EDGE_ACTRL, 0x00);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ ret = ov772x_mask_set(client,
+ EDGE_TRSHLD, OV772X_EDGE_THRESHOLD_MASK,
+ priv->info->edgectrl.threshold);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ ret = ov772x_mask_set(client,
+ EDGE_STRNGT, OV772X_EDGE_STRENGTH_MASK,
+ priv->info->edgectrl.strength);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ } else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) {
+ /*
+ * Auto Edge Control Mode
+ *
+ * set upper and lower limit
+ */
+ ret = ov772x_mask_set(client,
+ EDGE_UPPER, OV772X_EDGE_UPPER_MASK,
+ priv->info->edgectrl.upper);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ ret = ov772x_mask_set(client,
+ EDGE_LOWER, OV772X_EDGE_LOWER_MASK,
+ priv->info->edgectrl.lower);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ }
+
+ /* Format and window size */
+ ret = ov772x_write(client, HSTART, win->rect.left >> 2);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ ret = ov772x_write(client, HSIZE, win->rect.width >> 2);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ ret = ov772x_write(client, VSTART, win->rect.top >> 1);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ ret = ov772x_write(client, VSIZE, win->rect.height >> 1);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ ret = ov772x_write(client, HOUTSIZE, win->rect.width >> 2);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ ret = ov772x_write(client, VOUTSIZE, win->rect.height >> 1);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ ret = ov772x_write(client, HREF,
+ ((win->rect.top & 1) << HREF_VSTART_SHIFT) |
+ ((win->rect.left & 3) << HREF_HSTART_SHIFT) |
+ ((win->rect.height & 1) << HREF_VSIZE_SHIFT) |
+ ((win->rect.width & 3) << HREF_HSIZE_SHIFT));
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ ret = ov772x_write(client, EXHCH,
+ ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) |
+ ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT));
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ /*
+ * set DSP_CTRL3
+ */
+ val = cfmt->dsp3;
+ if (val) {
+ ret = ov772x_mask_set(client,
+ DSP_CTRL3, UV_MASK, val);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ }
+
+ /* DSP_CTRL4: AEC reference point and DSP output format. */
+ if (cfmt->dsp4) {
+ ret = ov772x_write(client, DSP_CTRL4, cfmt->dsp4);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ }
+
+ /*
+ * set COM3
+ */
+ val = cfmt->com3;
+ if (priv->info->flags & OV772X_FLAG_VFLIP)
+ val |= VFLIP_IMG;
+ if (priv->info->flags & OV772X_FLAG_HFLIP)
+ val |= HFLIP_IMG;
+ if (priv->flag_vflip)
+ val ^= VFLIP_IMG;
+ if (priv->flag_hflip)
+ val ^= HFLIP_IMG;
+
+ ret = ov772x_mask_set(client,
+ COM3, SWAP_MASK | IMG_MASK, val);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ /* COM7: Sensor resolution and output format control. */
+ ret = ov772x_write(client, COM7, win->com7_bit | cfmt->com7);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ /*
+ * set COM8
+ */
+ if (priv->band_filter) {
+ ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
+ if (!ret)
+ ret = ov772x_mask_set(client, BDBASE,
+ 0xff, 256 - priv->band_filter);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ }
+
+ return ret;
+
+ov772x_set_fmt_error:
+
+ ov772x_reset(client);
+
+ return ret;
+}
+
+static int ov772x_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+ return -EINVAL;
+
+ sel->r.left = 0;
+ sel->r.top = 0;
+ switch (sel->target) {
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ sel->r.width = OV772X_MAX_WIDTH;
+ sel->r.height = OV772X_MAX_HEIGHT;
+ return 0;
+ case V4L2_SEL_TGT_CROP:
+ sel->r.width = VGA_WIDTH;
+ sel->r.height = VGA_HEIGHT;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ov772x_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *mf = &format->format;
+ struct ov772x_priv *priv = to_ov772x(sd);
+
+ if (format->pad)
+ return -EINVAL;
+
+ mf->width = priv->win->rect.width;
+ mf->height = priv->win->rect.height;
+ mf->code = priv->cfmt->code;
+ mf->colorspace = priv->cfmt->colorspace;
+ mf->field = V4L2_FIELD_NONE;
+
+ return 0;
+}
+
+static int ov772x_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct ov772x_priv *priv = to_ov772x(sd);
+ struct v4l2_mbus_framefmt *mf = &format->format;
+ const struct ov772x_color_format *cfmt;
+ const struct ov772x_win_size *win;
+ int ret;
+
+ if (format->pad)
+ return -EINVAL;
+
+ ov772x_select_params(mf, &cfmt, &win);
+
+ mf->code = cfmt->code;
+ mf->width = win->rect.width;
+ mf->height = win->rect.height;
+ mf->field = V4L2_FIELD_NONE;
+ mf->colorspace = cfmt->colorspace;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ cfg->try_fmt = *mf;
+ return 0;
+ }
+
+ ret = ov772x_set_params(priv, cfmt, win);
+ if (ret < 0)
+ return ret;
+
+ priv->win = win;
+ priv->cfmt = cfmt;
+ return 0;
+}
+
+static int ov772x_video_probe(struct ov772x_priv *priv)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ u8 pid, ver;
+ const char *devname;
+ int ret;
+
+ ret = ov772x_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * check and show product ID and manufacturer ID
+ */
+ pid = ov772x_read(client, PID);
+ ver = ov772x_read(client, VER);
+
+ switch (VERSION(pid, ver)) {
+ case OV7720:
+ devname = "ov7720";
+ break;
+ case OV7725:
+ devname = "ov7725";
+ break;
+ default:
+ dev_err(&client->dev,
+ "Product ID error %x:%x\n", pid, ver);
+ ret = -ENODEV;
+ goto done;
+ }
+
+ dev_info(&client->dev,
+ "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
+ devname,
+ pid,
+ ver,
+ ov772x_read(client, MIDH),
+ ov772x_read(client, MIDL));
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
+
+done:
+ ov772x_s_power(&priv->subdev, 0);
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops ov772x_ctrl_ops = {
+ .s_ctrl = ov772x_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = ov772x_g_register,
+ .s_register = ov772x_s_register,
+#endif
+ .s_power = ov772x_s_power,
+};
+
+static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index >= ARRAY_SIZE(ov772x_cfmts))
+ return -EINVAL;
+
+ code->code = ov772x_cfmts[code->index].code;
+ return 0;
+}
+
+static int ov772x_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
+ .s_stream = ov772x_s_stream,
+ .g_mbus_config = ov772x_g_mbus_config,
+};
+
+static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
+ .enum_mbus_code = ov772x_enum_mbus_code,
+ .get_selection = ov772x_get_selection,
+ .get_fmt = ov772x_get_fmt,
+ .set_fmt = ov772x_set_fmt,
+};
+
+static const struct v4l2_subdev_ops ov772x_subdev_ops = {
+ .core = &ov772x_subdev_core_ops,
+ .video = &ov772x_subdev_video_ops,
+ .pad = &ov772x_subdev_pad_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+
+static int ov772x_probe(struct i2c_client *client,
+ const struct i2c_device_id *did)
+{
+ struct ov772x_priv *priv;
+ struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ int ret;
+
+ if (!ssdd || !ssdd->drv_priv) {
+ dev_err(&client->dev, "OV772X: missing platform data!\n");
+ return -EINVAL;
+ }
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_PROTOCOL_MANGLING)) {
+ dev_err(&adapter->dev,
+ "I2C-Adapter doesn't support SMBUS_BYTE_DATA or PROTOCOL_MANGLING\n");
+ return -EIO;
+ }
+ client->flags |= I2C_CLIENT_SCCB;
+
+ priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->info = ssdd->drv_priv;
+
+ v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
+ v4l2_ctrl_handler_init(&priv->hdl, 3);
+ v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0);
+ priv->subdev.ctrl_handler = &priv->hdl;
+ if (priv->hdl.error)
+ return priv->hdl.error;
+
+ priv->clk = v4l2_clk_get(&client->dev, "mclk");
+ if (IS_ERR(priv->clk)) {
+ ret = PTR_ERR(priv->clk);
+ goto eclkget;
+ }
+
+ ret = ov772x_video_probe(priv);
+ if (ret < 0) {
+ v4l2_clk_put(priv->clk);
+eclkget:
+ v4l2_ctrl_handler_free(&priv->hdl);
+ } else {
+ priv->cfmt = &ov772x_cfmts[0];
+ priv->win = &ov772x_win_sizes[0];
+ }
+
+ return ret;
+}
+
+static int ov772x_remove(struct i2c_client *client)
+{
+ struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
+
+ v4l2_clk_put(priv->clk);
+ v4l2_device_unregister_subdev(&priv->subdev);
+ v4l2_ctrl_handler_free(&priv->hdl);
+ return 0;
+}
+
+static const struct i2c_device_id ov772x_id[] = {
+ { "ov772x", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ov772x_id);
+
+static struct i2c_driver ov772x_i2c_driver = {
+ .driver = {
+ .name = "ov772x",
+ },
+ .probe = ov772x_probe,
+ .remove = ov772x_remove,
+ .id_table = ov772x_id,
+};
+
+module_i2c_driver(ov772x_i2c_driver);
+
+MODULE_DESCRIPTION("SoC Camera driver for ov772x");
+MODULE_AUTHOR("Kuninori Morimoto");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Add bindings documentation for Renesas Capture Engine Unit (CEU).
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
---
.../devicetree/bindings/media/renesas,ceu.txt | 81 ++++++++++++++++++++++
1 file changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/renesas,ceu.txt
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt b/Documentation/devicetree/bindings/media/renesas,ceu.txt
new file mode 100644
index 0000000..3fc66df
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.txt
@@ -0,0 +1,81 @@
+Renesas Capture Engine Unit (CEU)
+----------------------------------------------
+
+The Capture Engine Unit is the image capture interface found in the Renesas
+SH Mobile and RZ SoCs.
+
+The interface supports a single parallel input with data bus width of 8 or 16
+bits.
+
+Required properties:
+- compatible: Shall be "renesas,r7s72100-ceu" for CEU units found in RZ/A1H
+ and RZ/A1M SoCs.
+- reg: Registers address base and size.
+- interrupts: The interrupt specifier.
+
+The CEU supports a single parallel input and should contain a single 'port'
+subnode with a single 'endpoint'. Connection to input devices are modeled
+according to the video interfaces OF bindings specified in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Optional endpoint properties applicable to parallel input bus described in
+the above mentioned "video-interfaces.txt" file are supported.
+
+- hsync-active: Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+ If property is not present, default is active high.
+- vsync-active: Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+ If property is not present, default is active high.
+
+Example:
+
+The example describes the connection between the Capture Engine Unit and an
+OV7670 image sensor connected to i2c1 interface.
+
+ceu: ceu@e8210000 {
+ reg = <0xe8210000 0x209c>;
+ compatible = "renesas,r7s72100-ceu";
+ interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vio_pins>;
+
+ status = "okay";
+
+ port {
+ ceu_in: endpoint {
+ remote-endpoint = <&ov7670_out>;
+
+ hsync-active = <1>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+i2c1: i2c@fcfee400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ ov7670: camera@21 {
+ compatible = "ovti,ov7670";
+ reg = <0x21>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vio_pins>;
+
+ reset-gpios = <&port3 11 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&port3 12 GPIO_ACTIVE_HIGH>;
+
+ port {
+ ov7670_out: endpoint {
+ remote-endpoint = <&ceu_in>;
+
+ hsync-active = <1>;
+ vsync-active = <0>;
+ };
+ };
+ };
+};
--
2.7.4
Remove soc_camera framework dependencies from tw9910 sensor driver.
- Handle clock and gpios
- Register async subdevice
- Remove soc_camera specific g/s_mbus_config operations
- Add kernel doc to driver interface header file
- Adjust build system
This commit does not remove the original soc_camera based driver as long
as other platforms depends on soc_camera-based CEU driver.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
---
drivers/media/i2c/Kconfig | 9 +++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/tw9910.c | 162 ++++++++++++++++++++++++++++-----------------
include/media/i2c/tw9910.h | 9 +++
4 files changed, 120 insertions(+), 61 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index e71e968..0460613 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -423,6 +423,15 @@ config VIDEO_TW9906
To compile this driver as a module, choose M here: the
module will be called tw9906.
+config VIDEO_TW9910
+ tristate "Techwell TW9910 video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tw9910.
+
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on VIDEO_V4L2 && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index b0489a1..23c3ac6 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
obj-$(CONFIG_VIDEO_TW2804) += tw2804.o
obj-$(CONFIG_VIDEO_TW9903) += tw9903.o
obj-$(CONFIG_VIDEO_TW9906) += tw9906.o
+obj-$(CONFIG_VIDEO_TW9910) += tw9910.o
obj-$(CONFIG_VIDEO_CS3308) += cs3308.o
obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
diff --git a/drivers/media/i2c/tw9910.c b/drivers/media/i2c/tw9910.c
index bdb5e0a..96792df 100644
--- a/drivers/media/i2c/tw9910.c
+++ b/drivers/media/i2c/tw9910.c
@@ -1,6 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* tw9910 Video Driver
*
+ * Copyright (C) 2017 Jacopo Mondi <[email protected]>
+ *
* Copyright (C) 2008 Renesas Solutions Corp.
* Kuninori Morimoto <[email protected]>
*
@@ -10,12 +13,10 @@
* Copyright 2006-7 Jonathan Corbet <[email protected]>
* Copyright (C) 2008 Magnus Damm
* Copyright (C) 2008, Guennadi Liakhovetski <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/i2c.h>
@@ -25,9 +26,7 @@
#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
-#include <media/soc_camera.h>
#include <media/i2c/tw9910.h>
-#include <media/v4l2-clk.h>
#include <media/v4l2-subdev.h>
#define GET_ID(val) ((val & 0xF8) >> 3)
@@ -228,8 +227,10 @@ struct tw9910_scale_ctrl {
struct tw9910_priv {
struct v4l2_subdev subdev;
- struct v4l2_clk *clk;
+ struct clk *clk;
struct tw9910_video_info *info;
+ struct gpio_desc *pdn_gpio;
+ struct gpio_desc *rstb_gpio;
const struct tw9910_scale_ctrl *scale;
v4l2_std_id norm;
u32 revision;
@@ -582,13 +583,66 @@ static int tw9910_s_register(struct v4l2_subdev *sd,
}
#endif
+static int tw9910_power_on(struct tw9910_priv *priv)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ int ret;
+
+ if (priv->clk) {
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+ }
+
+ if (priv->pdn_gpio) {
+ gpiod_set_value(priv->pdn_gpio, 0);
+ usleep_range(500, 1000);
+ }
+
+ /*
+ * FIXME: The reset signal is connected to a shared GPIO on some
+ * platforms (namely the SuperH Migo-R). Until a framework becomes
+ * available to handle this cleanly, request the GPIO temporarily
+ * to avoid conflicts.
+ */
+ priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(priv->rstb_gpio)) {
+ dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
+ return PTR_ERR(priv->rstb_gpio);
+ }
+
+ if (priv->rstb_gpio) {
+ gpiod_set_value(priv->rstb_gpio, 1);
+ usleep_range(500, 1000);
+ gpiod_set_value(priv->rstb_gpio, 0);
+ usleep_range(500, 1000);
+
+ gpiod_put(priv->rstb_gpio);
+ }
+
+ return 0;
+}
+
+static int tw9910_power_off(struct tw9910_priv *priv)
+{
+ clk_disable_unprepare(priv->clk);
+
+ if (priv->pdn_gpio) {
+ gpiod_set_value(priv->pdn_gpio, 1);
+ usleep_range(500, 1000);
+ }
+
+ return 0;
+}
+
static int tw9910_s_power(struct v4l2_subdev *sd, int on)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
struct tw9910_priv *priv = to_tw9910(client);
- return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
+ return on ? tw9910_power_on(priv) :
+ tw9910_power_off(priv);
}
static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
@@ -614,7 +668,7 @@ static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
* set bus width
*/
val = 0x00;
- if (SOCAM_DATAWIDTH_16 == priv->info->buswidth)
+ if (priv->info->buswidth == 16)
val = LEN;
ret = tw9910_mask_set(client, OPFORM, LEN, val);
@@ -799,8 +853,7 @@ static int tw9910_video_probe(struct i2c_client *client)
/*
* tw9910 only use 8 or 16 bit bus width
*/
- if (SOCAM_DATAWIDTH_16 != priv->info->buswidth &&
- SOCAM_DATAWIDTH_8 != priv->info->buswidth) {
+ if (priv->info->buswidth != 16 && priv->info->buswidth != 8) {
dev_err(&client->dev, "bus width error\n");
return -ENODEV;
}
@@ -856,45 +909,6 @@ static int tw9910_enum_mbus_code(struct v4l2_subdev *sd,
return 0;
}
-static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
- struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
- cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
- V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
- V4L2_MBUS_DATA_ACTIVE_HIGH;
- cfg->type = V4L2_MBUS_PARALLEL;
- cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
- return 0;
-}
-
-static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
- const struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- u8 val = VSSL_VVALID | HSSL_DVALID;
- unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg);
-
- /*
- * set OUTCTR1
- *
- * We use VVALID and DVALID signals to control VSYNC and HSYNC
- * outputs, in this mode their polarity is inverted.
- */
- if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
- val |= HSP_HI;
-
- if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
- val |= VSP_HI;
-
- return i2c_smbus_write_byte_data(client, OUTCTR1, val);
-}
-
static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
{
*norm = V4L2_STD_NTSC | V4L2_STD_PAL;
@@ -905,8 +919,6 @@ static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
.s_std = tw9910_s_std,
.g_std = tw9910_g_std,
.s_stream = tw9910_s_stream,
- .g_mbus_config = tw9910_g_mbus_config,
- .s_mbus_config = tw9910_s_mbus_config,
.g_tvnorms = tw9910_g_tvnorms,
};
@@ -935,15 +947,14 @@ static int tw9910_probe(struct i2c_client *client,
struct tw9910_video_info *info;
struct i2c_adapter *adapter =
to_i2c_adapter(client->dev.parent);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
int ret;
- if (!ssdd || !ssdd->drv_priv) {
+ if (!client->dev.platform_data) {
dev_err(&client->dev, "TW9910: missing platform data!\n");
return -EINVAL;
}
- info = ssdd->drv_priv;
+ info = client->dev.platform_data;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev,
@@ -959,13 +970,37 @@ static int tw9910_probe(struct i2c_client *client,
v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
- priv->clk = v4l2_clk_get(&client->dev, "mclk");
- if (IS_ERR(priv->clk))
+ priv->clk = clk_get(&client->dev, "xti");
+ if (PTR_ERR(priv->clk) == -ENOENT) {
+ priv->clk = NULL;
+ } else if (IS_ERR(priv->clk)) {
+ dev_err(&client->dev, "Unable to get xti clock\n");
return PTR_ERR(priv->clk);
+ }
+
+ priv->pdn_gpio = gpiod_get_optional(&client->dev, "pdn",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->pdn_gpio)) {
+ dev_info(&client->dev, "Unable to get GPIO \"pdn\"");
+ ret = PTR_ERR(priv->pdn_gpio);
+ goto error_clk_put;
+ }
ret = tw9910_video_probe(client);
if (ret < 0)
- v4l2_clk_put(priv->clk);
+ goto error_gpio_put;
+
+ ret = v4l2_async_register_subdev(&priv->subdev);
+ if (ret)
+ goto error_gpio_put;
+
+ return ret;
+
+error_gpio_put:
+ if (priv->pdn_gpio)
+ gpiod_put(priv->pdn_gpio);
+error_clk_put:
+ clk_put(priv->clk);
return ret;
}
@@ -973,7 +1008,12 @@ static int tw9910_probe(struct i2c_client *client,
static int tw9910_remove(struct i2c_client *client)
{
struct tw9910_priv *priv = to_tw9910(client);
- v4l2_clk_put(priv->clk);
+
+ if (priv->pdn_gpio)
+ gpiod_put(priv->pdn_gpio);
+ clk_put(priv->clk);
+ v4l2_device_unregister_subdev(&priv->subdev);
+
return 0;
}
@@ -994,6 +1034,6 @@ static struct i2c_driver tw9910_i2c_driver = {
module_i2c_driver(tw9910_i2c_driver);
-MODULE_DESCRIPTION("SoC Camera driver for tw9910");
+MODULE_DESCRIPTION("V4L2 driver for TW9910 video decoder");
MODULE_AUTHOR("Kuninori Morimoto");
MODULE_LICENSE("GPL v2");
diff --git a/include/media/i2c/tw9910.h b/include/media/i2c/tw9910.h
index 90bcf1f..bec8f7b 100644
--- a/include/media/i2c/tw9910.h
+++ b/include/media/i2c/tw9910.h
@@ -18,6 +18,9 @@
#include <media/soc_camera.h>
+/**
+ * tw9910_mpout_pin - MPOUT (multi-purpose output) pin functions
+ */
enum tw9910_mpout_pin {
TW9910_MPO_VLOSS,
TW9910_MPO_HLOCK,
@@ -29,6 +32,12 @@ enum tw9910_mpout_pin {
TW9910_MPO_RTCO,
};
+/**
+ * tw9910_video_info - tw9910 driver interface structure
+ * @buswidth: Parallel data bus width (8 or 16).
+ * @mpout: Selected function of MPOUT (multi-purpose output) pin.
+ * See &enum tw9910_mpout_pin
+ */
struct tw9910_video_info {
unsigned long buswidth;
enum tw9910_mpout_pin mpout;
--
2.7.4
Remove soc_camera framework dependencies from ov772x sensor driver.
- Handle clock and gpios
- Register async subdevice
- Remove soc_camera specific g/s_mbus_config operations
- Change image format colorspace from JPEG to SRGB as the two use the
same colorspace information but JPEG makes assumptions on color
components quantization that do not apply to the sensor
- Remove sizes crop from get_selection as driver can't scale
- Add kernel doc to driver interface header file
- Adjust build system
This commit does not remove the original soc_camera based driver as long
as other platforms depends on soc_camera-based CEU driver.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
---
drivers/media/i2c/Kconfig | 11 +++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov772x.c | 172 ++++++++++++++++++++++++++++++---------------
include/media/i2c/ov772x.h | 6 +-
4 files changed, 133 insertions(+), 57 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 9f18cd2..e71e968 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -645,6 +645,17 @@ config VIDEO_OV5670
To compile this driver as a module, choose M here: the
module will be called ov5670.
+config VIDEO_OV772X
+ tristate "OmniVision OV772x sensor support"
+ depends on I2C && VIDEO_V4L2
+ depends on MEDIA_CAMERA_SUPPORT
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV772x camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov772x.
+
config VIDEO_OV7640
tristate "OmniVision OV7640 sensor support"
depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index c0f94cd..b0489a1 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_OV5670) += ov5670.o
obj-$(CONFIG_VIDEO_OV6650) += ov6650.o
obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
+obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 8063835..23106d7 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -1,6 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* ov772x Camera Driver
*
+ * Copyright (C) 2017 Jacopo Mondi <[email protected]>
+ *
* Copyright (C) 2008 Renesas Solutions Corp.
* Kuninori Morimoto <[email protected]>
*
@@ -9,27 +12,25 @@
* Copyright 2006-7 Jonathan Corbet <[email protected]>
* Copyright (C) 2008 Magnus Damm
* Copyright (C) 2008, Guennadi Liakhovetski <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/i2c.h>
#include <linux/slab.h>
-#include <linux/delay.h>
#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
#include <media/i2c/ov772x.h>
-#include <media/soc_camera.h>
-#include <media/v4l2-clk.h>
+
#include <media/v4l2-ctrls.h>
-#include <media/v4l2-subdev.h>
+#include <media/v4l2-device.h>
#include <media/v4l2-image-sizes.h>
+#include <media/v4l2-subdev.h>
/*
* register offset
@@ -393,8 +394,10 @@ struct ov772x_win_size {
struct ov772x_priv {
struct v4l2_subdev subdev;
struct v4l2_ctrl_handler hdl;
- struct v4l2_clk *clk;
+ struct clk *clk;
struct ov772x_camera_info *info;
+ struct gpio_desc *pwdn_gpio;
+ struct gpio_desc *rstb_gpio;
const struct ov772x_color_format *cfmt;
const struct ov772x_win_size *win;
unsigned short flag_vflip:1;
@@ -409,7 +412,7 @@ struct ov772x_priv {
static const struct ov772x_color_format ov772x_cfmts[] = {
{
.code = MEDIA_BUS_FMT_YUYV8_2X8,
- .colorspace = V4L2_COLORSPACE_JPEG,
+ .colorspace = V4L2_COLORSPACE_SRGB,
.dsp3 = 0x0,
.dsp4 = DSP_OFMT_YUV,
.com3 = SWAP_YUV,
@@ -417,7 +420,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = {
},
{
.code = MEDIA_BUS_FMT_YVYU8_2X8,
- .colorspace = V4L2_COLORSPACE_JPEG,
+ .colorspace = V4L2_COLORSPACE_SRGB,
.dsp3 = UV_ON,
.dsp4 = DSP_OFMT_YUV,
.com3 = SWAP_YUV,
@@ -425,7 +428,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = {
},
{
.code = MEDIA_BUS_FMT_UYVY8_2X8,
- .colorspace = V4L2_COLORSPACE_JPEG,
+ .colorspace = V4L2_COLORSPACE_SRGB,
.dsp3 = 0x0,
.dsp4 = DSP_OFMT_YUV,
.com3 = 0x0,
@@ -550,7 +553,7 @@ static int ov772x_reset(struct i2c_client *client)
}
/*
- * soc_camera_ops function
+ * subdev ops
*/
static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
@@ -650,13 +653,65 @@ static int ov772x_s_register(struct v4l2_subdev *sd,
}
#endif
+static int ov772x_power_on(struct ov772x_priv *priv)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ int ret;
+
+ if (priv->clk) {
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+ }
+
+ if (priv->pwdn_gpio) {
+ gpiod_set_value(priv->pwdn_gpio, 1);
+ usleep_range(500, 1000);
+ }
+
+ /*
+ * FIXME: The reset signal is connected to a shared GPIO on some
+ * platforms (namely the SuperH Migo-R). Until a framework becomes
+ * available to handle this cleanly, request the GPIO temporarily
+ * to avoid conflicts.
+ */
+ priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(priv->rstb_gpio)) {
+ dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
+ return PTR_ERR(priv->rstb_gpio);
+ }
+
+ if (priv->rstb_gpio) {
+ gpiod_set_value(priv->rstb_gpio, 1);
+ usleep_range(500, 1000);
+ gpiod_set_value(priv->rstb_gpio, 0);
+ usleep_range(500, 1000);
+
+ gpiod_put(priv->rstb_gpio);
+ }
+
+ return 0;
+}
+
+static int ov772x_power_off(struct ov772x_priv *priv)
+{
+ clk_disable_unprepare(priv->clk);
+
+ if (priv->pwdn_gpio) {
+ gpiod_set_value(priv->pwdn_gpio, 0);
+ usleep_range(500, 1000);
+ }
+
+ return 0;
+}
+
static int ov772x_s_power(struct v4l2_subdev *sd, int on)
{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
struct ov772x_priv *priv = to_ov772x(sd);
- return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
+ return on ? ov772x_power_on(priv) :
+ ov772x_power_off(priv);
}
static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
@@ -855,6 +910,8 @@ static int ov772x_get_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
+ struct ov772x_priv *priv = to_ov772x(sd);
+
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
return -EINVAL;
@@ -863,12 +920,9 @@ static int ov772x_get_selection(struct v4l2_subdev *sd,
switch (sel->target) {
case V4L2_SEL_TGT_CROP_BOUNDS:
case V4L2_SEL_TGT_CROP_DEFAULT:
- sel->r.width = OV772X_MAX_WIDTH;
- sel->r.height = OV772X_MAX_HEIGHT;
- return 0;
case V4L2_SEL_TGT_CROP:
- sel->r.width = VGA_WIDTH;
- sel->r.height = VGA_HEIGHT;
+ sel->r.width = priv->win->rect.width;
+ sel->r.height = priv->win->rect.height;
return 0;
default:
return -EINVAL;
@@ -914,6 +968,9 @@ static int ov772x_set_fmt(struct v4l2_subdev *sd,
mf->height = win->rect.height;
mf->field = V4L2_FIELD_NONE;
mf->colorspace = cfmt->colorspace;
+ mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+ mf->quantization = V4L2_QUANTIZATION_DEFAULT;
+ mf->xfer_func = V4L2_XFER_FUNC_DEFAULT;
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
cfg->try_fmt = *mf;
@@ -997,24 +1054,8 @@ static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
return 0;
}
-static int ov772x_g_mbus_config(struct v4l2_subdev *sd,
- struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
- cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
- V4L2_MBUS_DATA_ACTIVE_HIGH;
- cfg->type = V4L2_MBUS_PARALLEL;
- cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
- return 0;
-}
-
static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
.s_stream = ov772x_s_stream,
- .g_mbus_config = ov772x_g_mbus_config,
};
static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
@@ -1038,12 +1079,11 @@ static int ov772x_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
struct ov772x_priv *priv;
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct i2c_adapter *adapter = client->adapter;
int ret;
- if (!ssdd || !ssdd->drv_priv) {
- dev_err(&client->dev, "OV772X: missing platform data!\n");
+ if (!client->dev.platform_data) {
+ dev_err(&client->dev, "Missing ov772x platform data\n");
return -EINVAL;
}
@@ -1059,7 +1099,7 @@ static int ov772x_probe(struct i2c_client *client,
if (!priv)
return -ENOMEM;
- priv->info = ssdd->drv_priv;
+ priv->info = client->dev.platform_data;
v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
v4l2_ctrl_handler_init(&priv->hdl, 3);
@@ -1073,22 +1113,42 @@ static int ov772x_probe(struct i2c_client *client,
if (priv->hdl.error)
return priv->hdl.error;
- priv->clk = v4l2_clk_get(&client->dev, "mclk");
+ priv->clk = clk_get(&client->dev, "xclk");
if (IS_ERR(priv->clk)) {
+ dev_err(&client->dev, "Unable to get xclk clock\n");
ret = PTR_ERR(priv->clk);
- goto eclkget;
+ goto error_ctrl_free;
}
- ret = ov772x_video_probe(priv);
- if (ret < 0) {
- v4l2_clk_put(priv->clk);
-eclkget:
- v4l2_ctrl_handler_free(&priv->hdl);
- } else {
- priv->cfmt = &ov772x_cfmts[0];
- priv->win = &ov772x_win_sizes[0];
+ priv->pwdn_gpio = gpiod_get_optional(&client->dev, "pwdn",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(priv->pwdn_gpio)) {
+ dev_info(&client->dev, "Unable to get GPIO \"pwdn\"");
+ ret = PTR_ERR(priv->pwdn_gpio);
+ goto error_clk_put;
}
+ ret = ov772x_video_probe(priv);
+ if (ret < 0)
+ goto error_gpio_put;
+
+ priv->cfmt = &ov772x_cfmts[0];
+ priv->win = &ov772x_win_sizes[0];
+
+ ret = v4l2_async_register_subdev(&priv->subdev);
+ if (ret)
+ goto error_gpio_put;
+
+ return 0;
+
+error_gpio_put:
+ if (priv->pwdn_gpio)
+ gpiod_put(priv->pwdn_gpio);
+error_clk_put:
+ clk_put(priv->clk);
+error_ctrl_free:
+ v4l2_ctrl_handler_free(&priv->hdl);
+
return ret;
}
@@ -1096,7 +1156,9 @@ static int ov772x_remove(struct i2c_client *client)
{
struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
- v4l2_clk_put(priv->clk);
+ clk_put(priv->clk);
+ if (priv->pwdn_gpio)
+ gpiod_put(priv->pwdn_gpio);
v4l2_device_unregister_subdev(&priv->subdev);
v4l2_ctrl_handler_free(&priv->hdl);
return 0;
@@ -1119,6 +1181,6 @@ static struct i2c_driver ov772x_i2c_driver = {
module_i2c_driver(ov772x_i2c_driver);
-MODULE_DESCRIPTION("SoC Camera driver for ov772x");
+MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor");
MODULE_AUTHOR("Kuninori Morimoto");
MODULE_LICENSE("GPL v2");
diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h
index 00dbb7c..27d087b 100644
--- a/include/media/i2c/ov772x.h
+++ b/include/media/i2c/ov772x.h
@@ -48,8 +48,10 @@ struct ov772x_edge_ctrl {
.threshold = (t & OV772X_EDGE_THRESHOLD_MASK), \
}
-/*
- * ov772x camera info
+/**
+ * ov772x_camera_info - ov772x driver interface structure
+ * @flags: Sensor configuration flags
+ * @edgectrl: Sensor edge control
*/
struct ov772x_camera_info {
unsigned long flags;
--
2.7.4
Add support to ov772x driver for frame intervals handling and enumeration.
Tested with 10MHz and 24MHz input clock at VGA and QVGA resolutions for
10, 15 and 30 frame per second rates.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
---
drivers/media/i2c/ov772x.c | 213 +++++++++++++++++++++++++++++++++++++++++----
1 file changed, 196 insertions(+), 17 deletions(-)
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 23106d7..3edf0cb 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -250,6 +250,7 @@
#define AEC_1p2 0x10 /* 01: 1/2 window */
#define AEC_1p4 0x20 /* 10: 1/4 window */
#define AEC_2p3 0x30 /* 11: Low 2/3 window */
+#define COM4_RESERVED 0x01 /* Reserved bit */
/* COM5 */
#define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
@@ -267,6 +268,10 @@
/* AEC max step control */
#define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */
/* 1 : No limit to AEC increase step */
+/* CLKRC */
+ /* Input clock divider register */
+#define CLKRC_RESERVED 0x80 /* Reserved bit */
+#define CLKRC_DIV(n) ((n) - 1)
/* COM7 */
/* SCCB Register Reset */
@@ -373,6 +378,19 @@
#define VERSION(pid, ver) ((pid<<8)|(ver&0xFF))
/*
+ * PLL multipliers
+ */
+static struct {
+ unsigned int mult;
+ u8 com4;
+} ov772x_pll[] = {
+ { 1, PLL_BYPASS, },
+ { 4, PLL_4x, },
+ { 6, PLL_6x, },
+ { 8, PLL_8x, },
+};
+
+/*
* struct
*/
@@ -388,6 +406,7 @@ struct ov772x_color_format {
struct ov772x_win_size {
char *name;
unsigned char com7_bit;
+ unsigned int sizeimage;
struct v4l2_rect rect;
};
@@ -404,6 +423,7 @@ struct ov772x_priv {
unsigned short flag_hflip:1;
/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
unsigned short band_filter;
+ unsigned int fps;
};
/*
@@ -487,27 +507,34 @@ static const struct ov772x_color_format ov772x_cfmts[] = {
static const struct ov772x_win_size ov772x_win_sizes[] = {
{
- .name = "VGA",
- .com7_bit = SLCT_VGA,
+ .name = "VGA",
+ .com7_bit = SLCT_VGA,
+ .sizeimage = 510 * 748,
.rect = {
- .left = 140,
- .top = 14,
- .width = VGA_WIDTH,
- .height = VGA_HEIGHT,
+ .left = 140,
+ .top = 14,
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
},
}, {
- .name = "QVGA",
- .com7_bit = SLCT_QVGA,
+ .name = "QVGA",
+ .com7_bit = SLCT_QVGA,
+ .sizeimage = 278 * 576,
.rect = {
- .left = 252,
- .top = 6,
- .width = QVGA_WIDTH,
- .height = QVGA_HEIGHT,
+ .left = 252,
+ .top = 6,
+ .width = QVGA_WIDTH,
+ .height = QVGA_HEIGHT,
},
},
};
/*
+ * frame rate settings lists
+ */
+static unsigned int ov772x_frame_intervals[] = { 5, 10, 15, 20, 30, 60 };
+
+/*
* general function
*/
@@ -574,6 +601,128 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
return 0;
}
+static int ov772x_set_frame_rate(struct ov772x_priv *priv,
+ struct v4l2_fract *tpf,
+ const struct ov772x_color_format *cfmt,
+ const struct ov772x_win_size *win)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ unsigned long fin = clk_get_rate(priv->clk);
+ unsigned int fps = tpf->numerator ?
+ tpf->denominator / tpf->numerator :
+ tpf->denominator;
+ unsigned int best_diff;
+ unsigned int fsize;
+ unsigned int pclk;
+ unsigned int diff;
+ unsigned int idx;
+ unsigned int i;
+ u8 clkrc = 0;
+ u8 com4 = 0;
+ int ret;
+
+ /* Approximate to the closest supported frame interval. */
+ best_diff = ~0L;
+ for (i = 0, idx = 0; i < ARRAY_SIZE(ov772x_frame_intervals); i++) {
+ diff = abs(fps - ov772x_frame_intervals[i]);
+ if (diff < best_diff) {
+ idx = i;
+ best_diff = diff;
+ }
+ }
+ fps = ov772x_frame_intervals[idx];
+
+ /* Use image size (with blankings) to calculate desired pixel clock. */
+ switch (cfmt->com7 & OFMT_MASK) {
+ case OFMT_BRAW:
+ fsize = win->sizeimage;
+ break;
+ case OFMT_RGB:
+ case OFMT_YUV:
+ default:
+ fsize = win->sizeimage * 2;
+ break;
+ }
+
+ pclk = fps * fsize;
+
+ /*
+ * Pixel clock generation circuit is pretty simple:
+ *
+ * Fin -> [ / CLKRC_div] -> [ * PLL_mult] -> pclk
+ *
+ * Try to approximate the desired pixel clock testing all available
+ * PLL multipliers (1x, 4x, 6x, 8x) and calculate corresponding
+ * divisor with:
+ *
+ * div = PLL_mult * Fin / pclk
+ *
+ * and re-calculate the pixel clock using it:
+ *
+ * pclk = Fin * PLL_mult / CLKRC_div
+ *
+ * Choose the PLL_mult and CLKRC_div pair that gives a pixel clock
+ * closer to the desired one.
+ *
+ * The desired pixel clock is calculated using a known frame size
+ * (blanking included) and FPS.
+ */
+ best_diff = ~0L;
+ for (i = 0; i < ARRAY_SIZE(ov772x_pll); i++) {
+ unsigned int pll_mult = ov772x_pll[i].mult;
+ unsigned int pll_out = pll_mult * fin;
+ unsigned int t_pclk;
+ unsigned int div;
+
+ if (pll_out < pclk)
+ continue;
+
+ div = DIV_ROUND_CLOSEST(pll_out, pclk);
+ t_pclk = DIV_ROUND_CLOSEST(fin * pll_mult, div);
+ diff = abs(pclk - t_pclk);
+ if (diff < best_diff) {
+ best_diff = diff;
+ clkrc = CLKRC_DIV(div);
+ com4 = ov772x_pll[i].com4;
+ }
+ }
+
+ ret = ov772x_write(client, COM4, com4 | COM4_RESERVED);
+ if (ret < 0)
+ return ret;
+
+ ret = ov772x_write(client, CLKRC, clkrc | CLKRC_RESERVED);
+ if (ret < 0)
+ return ret;
+
+ tpf->numerator = 1;
+ tpf->denominator = fps;
+ priv->fps = tpf->denominator;
+
+ return 0;
+}
+
+static int ov772x_g_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *ival)
+{
+ struct ov772x_priv *priv = to_ov772x(sd);
+ struct v4l2_fract *tpf = &ival->interval;
+
+ tpf->numerator = 1;
+ tpf->denominator = priv->fps;
+
+ return 0;
+}
+
+static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *ival)
+{
+ struct ov772x_priv *priv = to_ov772x(sd);
+ struct v4l2_fract *tpf = &ival->interval;
+
+ return ov772x_set_frame_rate(priv, tpf, priv->cfmt, priv->win);
+}
+
static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct ov772x_priv *priv = container_of(ctrl->handler,
@@ -757,6 +906,7 @@ static int ov772x_set_params(struct ov772x_priv *priv,
const struct ov772x_win_size *win)
{
struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ struct v4l2_fract tpf;
int ret;
u8 val;
@@ -885,6 +1035,13 @@ static int ov772x_set_params(struct ov772x_priv *priv,
if (ret < 0)
goto ov772x_set_fmt_error;
+ /* COM4, CLKRC: Set pixel clock and framerate. */
+ tpf.numerator = 1;
+ tpf.denominator = priv->fps;
+ ret = ov772x_set_frame_rate(priv, &tpf, cfmt, win);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
/*
* set COM8
*/
@@ -1043,6 +1200,24 @@ static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
.s_power = ov772x_s_power,
};
+static int ov772x_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ if (fie->pad || fie->index >= ARRAY_SIZE(ov772x_frame_intervals))
+ return -EINVAL;
+
+ if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH)
+ return -EINVAL;
+ if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT)
+ return -EINVAL;
+
+ fie->interval.numerator = 1;
+ fie->interval.denominator = ov772x_frame_intervals[fie->index];
+
+ return 0;
+}
+
static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
@@ -1055,14 +1230,17 @@ static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
}
static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
- .s_stream = ov772x_s_stream,
+ .s_stream = ov772x_s_stream,
+ .s_frame_interval = ov772x_s_frame_interval,
+ .g_frame_interval = ov772x_g_frame_interval,
};
static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
- .enum_mbus_code = ov772x_enum_mbus_code,
- .get_selection = ov772x_get_selection,
- .get_fmt = ov772x_get_fmt,
- .set_fmt = ov772x_set_fmt,
+ .enum_frame_interval = ov772x_enum_frame_interval,
+ .enum_mbus_code = ov772x_enum_mbus_code,
+ .get_selection = ov772x_get_selection,
+ .get_fmt = ov772x_get_fmt,
+ .set_fmt = ov772x_set_fmt,
};
static const struct v4l2_subdev_ops ov772x_subdev_ops = {
@@ -1134,6 +1312,7 @@ static int ov772x_probe(struct i2c_client *client,
priv->cfmt = &ov772x_cfmts[0];
priv->win = &ov772x_win_sizes[0];
+ priv->fps = 15;
ret = v4l2_async_register_subdev(&priv->subdev);
if (ret)
--
2.7.4
Migo-R platform uses sh_mobile_ceu camera driver, which is now being
replaced by a proper V4L2 camera driver named 'renesas-ceu'.
Move Migo-R platform to use the v4l2 renesas-ceu camera driver
interface and get rid of soc_camera defined components used to register
sensor drivers and of platform specific enable/disable routines.
Register clock source and GPIOs for sensor drivers, so they can use
clock and gpio APIs.
Also, memory for CEU video buffers is now reserved with membocks APIs,
and need to be declared as dma_coherent during machine initialization to
remove that architecture specific part from CEU driver.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
---
arch/sh/boards/mach-migor/setup.c | 225 +++++++++++++++------------------
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 2 +-
2 files changed, 101 insertions(+), 126 deletions(-)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 0bcbe58..271dfc2 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -1,17 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas System Solutions Asia Pte. Ltd - Migo-R
*
* Copyright (C) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
+#include <linux/clkdev.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/memblock.h>
#include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
#include <linux/mfd/tmio.h>
@@ -23,10 +22,11 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/videodev2.h>
#include <linux/sh_intc.h>
#include <video/sh_mobile_lcdc.h>
-#include <media/drv-intf/sh_mobile_ceu.h>
+#include <media/drv-intf/renesas-ceu.h>
#include <media/i2c/ov772x.h>
#include <media/soc_camera.h>
#include <media/i2c/tw9910.h>
@@ -45,6 +45,9 @@
* 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
*/
+#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
+static phys_addr_t ceu_dma_membase;
+
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
@@ -301,65 +304,24 @@ static struct platform_device migor_lcdc_device = {
},
};
-static struct clk *camera_clk;
-static DEFINE_MUTEX(camera_lock);
-
-static void camera_power_on(int is_tw)
-{
- mutex_lock(&camera_lock);
-
- /* Use 10 MHz VIO_CKO instead of 24 MHz to work
- * around signal quality issues on Panel Board V2.1.
- */
- camera_clk = clk_get(NULL, "video_clk");
- clk_set_rate(camera_clk, 10000000);
- clk_enable(camera_clk); /* start VIO_CKO */
-
- /* use VIO_RST to take camera out of reset */
- mdelay(10);
- if (is_tw) {
- gpio_set_value(GPIO_PTT2, 0);
- gpio_set_value(GPIO_PTT0, 0);
- } else {
- gpio_set_value(GPIO_PTT0, 1);
- }
- gpio_set_value(GPIO_PTT3, 0);
- mdelay(10);
- gpio_set_value(GPIO_PTT3, 1);
- mdelay(10); /* wait to let chip come out of reset */
-}
-
-static void camera_power_off(void)
-{
- clk_disable(camera_clk); /* stop VIO_CKO */
- clk_put(camera_clk);
-
- gpio_set_value(GPIO_PTT3, 0);
- mutex_unlock(&camera_lock);
-}
-
-static int ov7725_power(struct device *dev, int mode)
-{
- if (mode)
- camera_power_on(0);
- else
- camera_power_off();
-
- return 0;
-}
-
-static int tw9910_power(struct device *dev, int mode)
-{
- if (mode)
- camera_power_on(1);
- else
- camera_power_off();
-
- return 0;
-}
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
- .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+static struct ceu_platform_data ceu_pdata = {
+ .num_subdevs = 2,
+ .subdevs = {
+ { /* [0] = ov772x */
+ .flags = 0,
+ .bus_width = 8,
+ .bus_shift = 0,
+ .i2c_adapter_id = 0,
+ .i2c_address = 0x21,
+ },
+ { /* [1] = tw9910 */
+ .flags = 0,
+ .bus_width = 8,
+ .bus_shift = 0,
+ .i2c_adapter_id = 0,
+ .i2c_address = 0x45,
+ },
+ },
};
static struct resource migor_ceu_resources[] = {
@@ -373,18 +335,32 @@ static struct resource migor_ceu_resources[] = {
.start = evt2irq(0x880),
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* place holder for contiguous memory */
- },
};
static struct platform_device migor_ceu_device = {
- .name = "sh_mobile_ceu",
- .id = 0, /* "ceu0" clock */
+ .name = "renesas-ceu",
+ .id = 0, /* ceu.0 */
.num_resources = ARRAY_SIZE(migor_ceu_resources),
.resource = migor_ceu_resources,
.dev = {
- .platform_data = &sh_mobile_ceu_info,
+ .platform_data = &ceu_pdata,
+ },
+};
+
+/* Powerdown/reset gpios for CEU image sensors */
+static struct gpiod_lookup_table ov7725_gpios = {
+ .dev_id = "0-0021",
+ .table = {
+ GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "pwdn", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
+ },
+};
+
+static struct gpiod_lookup_table tw9910_gpios = {
+ .dev_id = "0-0045",
+ .table = {
+ GPIO_LOOKUP("sh7722_pfc", GPIO_PTT2, "pdn", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
},
};
@@ -423,6 +399,15 @@ static struct platform_device sdhi_cn9_device = {
},
};
+static struct ov772x_camera_info ov7725_info = {
+ .flags = 0,
+};
+
+static struct tw9910_video_info tw9910_info = {
+ .buswidth = 8,
+ .mpout = TW9910_MPO_FIELD,
+};
+
static struct i2c_board_info migor_i2c_devices[] = {
{
I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -434,51 +419,13 @@ static struct i2c_board_info migor_i2c_devices[] = {
{
I2C_BOARD_INFO("wm8978", 0x1a),
},
-};
-
-static struct i2c_board_info migor_i2c_camera[] = {
{
I2C_BOARD_INFO("ov772x", 0x21),
+ .platform_data = &ov7725_info,
},
{
I2C_BOARD_INFO("tw9910", 0x45),
- },
-};
-
-static struct ov772x_camera_info ov7725_info;
-
-static struct soc_camera_link ov7725_link = {
- .power = ov7725_power,
- .board_info = &migor_i2c_camera[0],
- .i2c_adapter_id = 0,
- .priv = &ov7725_info,
-};
-
-static struct tw9910_video_info tw9910_info = {
- .buswidth = SOCAM_DATAWIDTH_8,
- .mpout = TW9910_MPO_FIELD,
-};
-
-static struct soc_camera_link tw9910_link = {
- .power = tw9910_power,
- .board_info = &migor_i2c_camera[1],
- .i2c_adapter_id = 0,
- .priv = &tw9910_info,
-};
-
-static struct platform_device migor_camera[] = {
- {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .platform_data = &ov7725_link,
- },
- }, {
- .name = "soc-camera-pdrv",
- .id = 1,
- .dev = {
- .platform_data = &tw9910_link,
- },
+ .platform_data = &tw9910_info,
},
};
@@ -486,12 +433,9 @@ static struct platform_device *migor_devices[] __initdata = {
&smc91x_eth_device,
&sh_keysc_device,
&migor_lcdc_device,
- &migor_ceu_device,
&migor_nor_flash_device,
&migor_nand_flash_device,
&sdhi_cn9_device,
- &migor_camera[0],
- &migor_camera[1],
};
extern char migor_sdram_enter_start;
@@ -501,6 +445,8 @@ extern char migor_sdram_leave_end;
static int __init migor_devices_setup(void)
{
+ struct clk *video_clk;
+
/* register board specific self-refresh code */
sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
&migor_sdram_enter_start,
@@ -620,20 +566,8 @@ static int __init migor_devices_setup(void)
gpio_request(GPIO_FN_VIO_D9, NULL);
gpio_request(GPIO_FN_VIO_D8, NULL);
- gpio_request(GPIO_PTT3, NULL); /* VIO_RST */
- gpio_direction_output(GPIO_PTT3, 0);
- gpio_request(GPIO_PTT2, NULL); /* TV_IN_EN */
- gpio_direction_output(GPIO_PTT2, 1);
- gpio_request(GPIO_PTT0, NULL); /* CAM_EN */
-#ifdef CONFIG_SH_MIGOR_RTA_WVGA
- gpio_direction_output(GPIO_PTT0, 0);
-#else
- gpio_direction_output(GPIO_PTT0, 1);
-#endif
__raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
- platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
-
/* SIU: Port B */
gpio_request(GPIO_FN_SIUBOLR, NULL);
gpio_request(GPIO_FN_SIUBOBT, NULL);
@@ -647,9 +581,36 @@ static int __init migor_devices_setup(void)
*/
__raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
+ /*
+ * Use 10 MHz VIO_CKO instead of 24 MHz to work around signal quality
+ * issues on Panel Board V2.1.
+ */
+ video_clk = clk_get(NULL, "video_clk");
+ if (!IS_ERR(video_clk)) {
+ clk_set_rate(video_clk, clk_round_rate(video_clk, 10000000));
+ clk_put(video_clk);
+ }
+
+ /* Add a clock alias for ov7725 xclk source. */
+ clk_add_alias("xclk", "0-0021", "video_clk", NULL);
+
+ /* Register GPIOs for video sources. */
+ gpiod_add_lookup_table(&ov7725_gpios);
+ gpiod_add_lookup_table(&tw9910_gpios);
+
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
+ /* Initialize CEU platform device separately to map memory first */
+ device_initialize(&migor_ceu_device.dev);
+ arch_setup_pdev_archdata(&migor_ceu_device);
+ dma_declare_coherent_memory(&migor_ceu_device.dev,
+ ceu_dma_membase, ceu_dma_membase,
+ ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
+ DMA_MEMORY_EXCLUSIVE);
+
+ platform_device_add(&migor_ceu_device);
+
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
arch_initcall(migor_devices_setup);
@@ -665,10 +626,24 @@ static int migor_mode_pins(void)
return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
}
+/* Reserve a portion of memory for CEU buffers */
+static void __init migor_mv_mem_reserve(void)
+{
+ phys_addr_t phys;
+ phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
+
+ phys = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_ALLOC_ANYWHERE);
+ memblock_free(phys, size);
+ memblock_remove(phys, size);
+
+ ceu_dma_membase = phys;
+}
+
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_migor __initmv = {
.mv_name = "Migo-R",
.mv_mode_pins = migor_mode_pins,
+ .mv_mem_reserve = migor_mv_mem_reserve,
};
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 8f07a1a..d85091e 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -223,7 +223,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
- CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[HWBLK_CEU]),
+ CLKDEV_DEV_ID("renesas-ceu.0", &mstp_clks[HWBLK_CEU]),
CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU]),
CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
--
2.7.4
Add Capture Engine Unit (CEU) node to device tree.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
---
arch/arm/boot/dts/r7s72100.dtsi | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ab9645a..23e05ce 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -135,9 +135,9 @@
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe042c 4>;
- clocks = <&p0_clk>;
- clock-indices = <R7S72100_CLK_RTC>;
- clock-output-names = "rtc";
+ clocks = <&b_clk>, <&p0_clk>;
+ clock-indices = <R7S72100_CLK_CEU R7S72100_CLK_RTC>;
+ clock-output-names = "ceu", "rtc";
};
mstp7_clks: mstp7_clks@fcfe0430 {
@@ -667,4 +667,13 @@
power-domains = <&cpg_clocks>;
status = "disabled";
};
+
+ ceu: camera@e8210000 {
+ reg = <0xe8210000 0x3000>;
+ compatible = "renesas,r7s72100-ceu";
+ interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
};
--
2.7.4
Copy the soc_camera based driver in v4l2 sensor driver directory.
This commit just copies the original file without modifying it.
No modification to KConfig and Makefile as soc_camera framework
dependencies need to be removed first in next commit.
Signed-off-by: Jacopo Mondi <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
---
drivers/media/i2c/tw9910.c | 999 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 999 insertions(+)
create mode 100644 drivers/media/i2c/tw9910.c
diff --git a/drivers/media/i2c/tw9910.c b/drivers/media/i2c/tw9910.c
new file mode 100644
index 0000000..bdb5e0a
--- /dev/null
+++ b/drivers/media/i2c/tw9910.c
@@ -0,0 +1,999 @@
+/*
+ * tw9910 Video Driver
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <[email protected]>
+ *
+ * Based on ov772x driver,
+ *
+ * Copyright (C) 2008 Kuninori Morimoto <[email protected]>
+ * Copyright 2006-7 Jonathan Corbet <[email protected]>
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2008, Guennadi Liakhovetski <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
+#include <media/i2c/tw9910.h>
+#include <media/v4l2-clk.h>
+#include <media/v4l2-subdev.h>
+
+#define GET_ID(val) ((val & 0xF8) >> 3)
+#define GET_REV(val) (val & 0x07)
+
+/*
+ * register offset
+ */
+#define ID 0x00 /* Product ID Code Register */
+#define STATUS1 0x01 /* Chip Status Register I */
+#define INFORM 0x02 /* Input Format */
+#define OPFORM 0x03 /* Output Format Control Register */
+#define DLYCTR 0x04 /* Hysteresis and HSYNC Delay Control */
+#define OUTCTR1 0x05 /* Output Control I */
+#define ACNTL1 0x06 /* Analog Control Register 1 */
+#define CROP_HI 0x07 /* Cropping Register, High */
+#define VDELAY_LO 0x08 /* Vertical Delay Register, Low */
+#define VACTIVE_LO 0x09 /* Vertical Active Register, Low */
+#define HDELAY_LO 0x0A /* Horizontal Delay Register, Low */
+#define HACTIVE_LO 0x0B /* Horizontal Active Register, Low */
+#define CNTRL1 0x0C /* Control Register I */
+#define VSCALE_LO 0x0D /* Vertical Scaling Register, Low */
+#define SCALE_HI 0x0E /* Scaling Register, High */
+#define HSCALE_LO 0x0F /* Horizontal Scaling Register, Low */
+#define BRIGHT 0x10 /* BRIGHTNESS Control Register */
+#define CONTRAST 0x11 /* CONTRAST Control Register */
+#define SHARPNESS 0x12 /* SHARPNESS Control Register I */
+#define SAT_U 0x13 /* Chroma (U) Gain Register */
+#define SAT_V 0x14 /* Chroma (V) Gain Register */
+#define HUE 0x15 /* Hue Control Register */
+#define CORING1 0x17
+#define CORING2 0x18 /* Coring and IF compensation */
+#define VBICNTL 0x19 /* VBI Control Register */
+#define ACNTL2 0x1A /* Analog Control 2 */
+#define OUTCTR2 0x1B /* Output Control 2 */
+#define SDT 0x1C /* Standard Selection */
+#define SDTR 0x1D /* Standard Recognition */
+#define TEST 0x1F /* Test Control Register */
+#define CLMPG 0x20 /* Clamping Gain */
+#define IAGC 0x21 /* Individual AGC Gain */
+#define AGCGAIN 0x22 /* AGC Gain */
+#define PEAKWT 0x23 /* White Peak Threshold */
+#define CLMPL 0x24 /* Clamp level */
+#define SYNCT 0x25 /* Sync Amplitude */
+#define MISSCNT 0x26 /* Sync Miss Count Register */
+#define PCLAMP 0x27 /* Clamp Position Register */
+#define VCNTL1 0x28 /* Vertical Control I */
+#define VCNTL2 0x29 /* Vertical Control II */
+#define CKILL 0x2A /* Color Killer Level Control */
+#define COMB 0x2B /* Comb Filter Control */
+#define LDLY 0x2C /* Luma Delay and H Filter Control */
+#define MISC1 0x2D /* Miscellaneous Control I */
+#define LOOP 0x2E /* LOOP Control Register */
+#define MISC2 0x2F /* Miscellaneous Control II */
+#define MVSN 0x30 /* Macrovision Detection */
+#define STATUS2 0x31 /* Chip STATUS II */
+#define HFREF 0x32 /* H monitor */
+#define CLMD 0x33 /* CLAMP MODE */
+#define IDCNTL 0x34 /* ID Detection Control */
+#define CLCNTL1 0x35 /* Clamp Control I */
+#define ANAPLLCTL 0x4C
+#define VBIMIN 0x4D
+#define HSLOWCTL 0x4E
+#define WSS3 0x4F
+#define FILLDATA 0x50
+#define SDID 0x51
+#define DID 0x52
+#define WSS1 0x53
+#define WSS2 0x54
+#define VVBI 0x55
+#define LCTL6 0x56
+#define LCTL7 0x57
+#define LCTL8 0x58
+#define LCTL9 0x59
+#define LCTL10 0x5A
+#define LCTL11 0x5B
+#define LCTL12 0x5C
+#define LCTL13 0x5D
+#define LCTL14 0x5E
+#define LCTL15 0x5F
+#define LCTL16 0x60
+#define LCTL17 0x61
+#define LCTL18 0x62
+#define LCTL19 0x63
+#define LCTL20 0x64
+#define LCTL21 0x65
+#define LCTL22 0x66
+#define LCTL23 0x67
+#define LCTL24 0x68
+#define LCTL25 0x69
+#define LCTL26 0x6A
+#define HSBEGIN 0x6B
+#define HSEND 0x6C
+#define OVSDLY 0x6D
+#define OVSEND 0x6E
+#define VBIDELAY 0x6F
+
+/*
+ * register detail
+ */
+
+/* INFORM */
+#define FC27_ON 0x40 /* 1 : Input crystal clock frequency is 27MHz */
+#define FC27_FF 0x00 /* 0 : Square pixel mode. */
+ /* Must use 24.54MHz for 60Hz field rate */
+ /* source or 29.5MHz for 50Hz field rate */
+#define IFSEL_S 0x10 /* 01 : S-video decoding */
+#define IFSEL_C 0x00 /* 00 : Composite video decoding */
+ /* Y input video selection */
+#define YSEL_M0 0x00 /* 00 : Mux0 selected */
+#define YSEL_M1 0x04 /* 01 : Mux1 selected */
+#define YSEL_M2 0x08 /* 10 : Mux2 selected */
+#define YSEL_M3 0x10 /* 11 : Mux3 selected */
+
+/* OPFORM */
+#define MODE 0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */
+ /* 1 : ITU-R-656 compatible data sequence format */
+#define LEN 0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */
+ /* 1 : 16-bit YCrCb 4:2:2 output format.*/
+#define LLCMODE 0x20 /* 1 : LLC output mode. */
+ /* 0 : free-run output mode */
+#define AINC 0x10 /* Serial interface auto-indexing control */
+ /* 0 : auto-increment */
+ /* 1 : non-auto */
+#define VSCTL 0x08 /* 1 : Vertical out ctrl by DVALID */
+ /* 0 : Vertical out ctrl by HACTIVE and DVALID */
+#define OEN_TRI_SEL_MASK 0x07
+#define OEN_TRI_SEL_ALL_ON 0x00 /* Enable output for Rev0/Rev1 */
+#define OEN_TRI_SEL_ALL_OFF_r0 0x06 /* All tri-stated for Rev0 */
+#define OEN_TRI_SEL_ALL_OFF_r1 0x07 /* All tri-stated for Rev1 */
+
+/* OUTCTR1 */
+#define VSP_LO 0x00 /* 0 : VS pin output polarity is active low */
+#define VSP_HI 0x80 /* 1 : VS pin output polarity is active high. */
+ /* VS pin output control */
+#define VSSL_VSYNC 0x00 /* 0 : VSYNC */
+#define VSSL_VACT 0x10 /* 1 : VACT */
+#define VSSL_FIELD 0x20 /* 2 : FIELD */
+#define VSSL_VVALID 0x30 /* 3 : VVALID */
+#define VSSL_ZERO 0x70 /* 7 : 0 */
+#define HSP_LOW 0x00 /* 0 : HS pin output polarity is active low */
+#define HSP_HI 0x08 /* 1 : HS pin output polarity is active high.*/
+ /* HS pin output control */
+#define HSSL_HACT 0x00 /* 0 : HACT */
+#define HSSL_HSYNC 0x01 /* 1 : HSYNC */
+#define HSSL_DVALID 0x02 /* 2 : DVALID */
+#define HSSL_HLOCK 0x03 /* 3 : HLOCK */
+#define HSSL_ASYNCW 0x04 /* 4 : ASYNCW */
+#define HSSL_ZERO 0x07 /* 7 : 0 */
+
+/* ACNTL1 */
+#define SRESET 0x80 /* resets the device to its default state
+ * but all register content remain unchanged.
+ * This bit is self-resetting.
+ */
+#define ACNTL1_PDN_MASK 0x0e
+#define CLK_PDN 0x08 /* system clock power down */
+#define Y_PDN 0x04 /* Luma ADC power down */
+#define C_PDN 0x02 /* Chroma ADC power down */
+
+/* ACNTL2 */
+#define ACNTL2_PDN_MASK 0x40
+#define PLL_PDN 0x40 /* PLL power down */
+
+/* VBICNTL */
+
+/* RTSEL : control the real time signal output from the MPOUT pin */
+#define RTSEL_MASK 0x07
+#define RTSEL_VLOSS 0x00 /* 0000 = Video loss */
+#define RTSEL_HLOCK 0x01 /* 0001 = H-lock */
+#define RTSEL_SLOCK 0x02 /* 0010 = S-lock */
+#define RTSEL_VLOCK 0x03 /* 0011 = V-lock */
+#define RTSEL_MONO 0x04 /* 0100 = MONO */
+#define RTSEL_DET50 0x05 /* 0101 = DET50 */
+#define RTSEL_FIELD 0x06 /* 0110 = FIELD */
+#define RTSEL_RTCO 0x07 /* 0111 = RTCO ( Real Time Control ) */
+
+/* HSYNC start and end are constant for now */
+#define HSYNC_START 0x0260
+#define HSYNC_END 0x0300
+
+/*
+ * structure
+ */
+
+struct regval_list {
+ unsigned char reg_num;
+ unsigned char value;
+};
+
+struct tw9910_scale_ctrl {
+ char *name;
+ unsigned short width;
+ unsigned short height;
+ u16 hscale;
+ u16 vscale;
+};
+
+struct tw9910_priv {
+ struct v4l2_subdev subdev;
+ struct v4l2_clk *clk;
+ struct tw9910_video_info *info;
+ const struct tw9910_scale_ctrl *scale;
+ v4l2_std_id norm;
+ u32 revision;
+};
+
+static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = {
+ {
+ .name = "NTSC SQ",
+ .width = 640,
+ .height = 480,
+ .hscale = 0x0100,
+ .vscale = 0x0100,
+ },
+ {
+ .name = "NTSC CCIR601",
+ .width = 720,
+ .height = 480,
+ .hscale = 0x0100,
+ .vscale = 0x0100,
+ },
+ {
+ .name = "NTSC SQ (CIF)",
+ .width = 320,
+ .height = 240,
+ .hscale = 0x0200,
+ .vscale = 0x0200,
+ },
+ {
+ .name = "NTSC CCIR601 (CIF)",
+ .width = 360,
+ .height = 240,
+ .hscale = 0x0200,
+ .vscale = 0x0200,
+ },
+ {
+ .name = "NTSC SQ (QCIF)",
+ .width = 160,
+ .height = 120,
+ .hscale = 0x0400,
+ .vscale = 0x0400,
+ },
+ {
+ .name = "NTSC CCIR601 (QCIF)",
+ .width = 180,
+ .height = 120,
+ .hscale = 0x0400,
+ .vscale = 0x0400,
+ },
+};
+
+static const struct tw9910_scale_ctrl tw9910_pal_scales[] = {
+ {
+ .name = "PAL SQ",
+ .width = 768,
+ .height = 576,
+ .hscale = 0x0100,
+ .vscale = 0x0100,
+ },
+ {
+ .name = "PAL CCIR601",
+ .width = 720,
+ .height = 576,
+ .hscale = 0x0100,
+ .vscale = 0x0100,
+ },
+ {
+ .name = "PAL SQ (CIF)",
+ .width = 384,
+ .height = 288,
+ .hscale = 0x0200,
+ .vscale = 0x0200,
+ },
+ {
+ .name = "PAL CCIR601 (CIF)",
+ .width = 360,
+ .height = 288,
+ .hscale = 0x0200,
+ .vscale = 0x0200,
+ },
+ {
+ .name = "PAL SQ (QCIF)",
+ .width = 192,
+ .height = 144,
+ .hscale = 0x0400,
+ .vscale = 0x0400,
+ },
+ {
+ .name = "PAL CCIR601 (QCIF)",
+ .width = 180,
+ .height = 144,
+ .hscale = 0x0400,
+ .vscale = 0x0400,
+ },
+};
+
+/*
+ * general function
+ */
+static struct tw9910_priv *to_tw9910(const struct i2c_client *client)
+{
+ return container_of(i2c_get_clientdata(client), struct tw9910_priv,
+ subdev);
+}
+
+static int tw9910_mask_set(struct i2c_client *client, u8 command,
+ u8 mask, u8 set)
+{
+ s32 val = i2c_smbus_read_byte_data(client, command);
+ if (val < 0)
+ return val;
+
+ val &= ~mask;
+ val |= set & mask;
+
+ return i2c_smbus_write_byte_data(client, command, val);
+}
+
+static int tw9910_set_scale(struct i2c_client *client,
+ const struct tw9910_scale_ctrl *scale)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, SCALE_HI,
+ (scale->vscale & 0x0F00) >> 4 |
+ (scale->hscale & 0x0F00) >> 8);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, HSCALE_LO,
+ scale->hscale & 0x00FF);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, VSCALE_LO,
+ scale->vscale & 0x00FF);
+
+ return ret;
+}
+
+static int tw9910_set_hsync(struct i2c_client *client)
+{
+ struct tw9910_priv *priv = to_tw9910(client);
+ int ret;
+
+ /* bit 10 - 3 */
+ ret = i2c_smbus_write_byte_data(client, HSBEGIN,
+ (HSYNC_START & 0x07F8) >> 3);
+ if (ret < 0)
+ return ret;
+
+ /* bit 10 - 3 */
+ ret = i2c_smbus_write_byte_data(client, HSEND,
+ (HSYNC_END & 0x07F8) >> 3);
+ if (ret < 0)
+ return ret;
+
+ /* So far only revisions 0 and 1 have been seen */
+ /* bit 2 - 0 */
+ if (1 == priv->revision)
+ ret = tw9910_mask_set(client, HSLOWCTL, 0x77,
+ (HSYNC_START & 0x0007) << 4 |
+ (HSYNC_END & 0x0007));
+
+ return ret;
+}
+
+static void tw9910_reset(struct i2c_client *client)
+{
+ tw9910_mask_set(client, ACNTL1, SRESET, SRESET);
+ msleep(1);
+}
+
+static int tw9910_power(struct i2c_client *client, int enable)
+{
+ int ret;
+ u8 acntl1;
+ u8 acntl2;
+
+ if (enable) {
+ acntl1 = 0;
+ acntl2 = 0;
+ } else {
+ acntl1 = CLK_PDN | Y_PDN | C_PDN;
+ acntl2 = PLL_PDN;
+ }
+
+ ret = tw9910_mask_set(client, ACNTL1, ACNTL1_PDN_MASK, acntl1);
+ if (ret < 0)
+ return ret;
+
+ return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2);
+}
+
+static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm,
+ u32 width, u32 height)
+{
+ const struct tw9910_scale_ctrl *scale;
+ const struct tw9910_scale_ctrl *ret = NULL;
+ __u32 diff = 0xffffffff, tmp;
+ int size, i;
+
+ if (norm & V4L2_STD_NTSC) {
+ scale = tw9910_ntsc_scales;
+ size = ARRAY_SIZE(tw9910_ntsc_scales);
+ } else if (norm & V4L2_STD_PAL) {
+ scale = tw9910_pal_scales;
+ size = ARRAY_SIZE(tw9910_pal_scales);
+ } else {
+ return NULL;
+ }
+
+ for (i = 0; i < size; i++) {
+ tmp = abs(width - scale[i].width) +
+ abs(height - scale[i].height);
+ if (tmp < diff) {
+ diff = tmp;
+ ret = scale + i;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * subdevice operations
+ */
+static int tw9910_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+ u8 val;
+ int ret;
+
+ if (!enable) {
+ switch (priv->revision) {
+ case 0:
+ val = OEN_TRI_SEL_ALL_OFF_r0;
+ break;
+ case 1:
+ val = OEN_TRI_SEL_ALL_OFF_r1;
+ break;
+ default:
+ dev_err(&client->dev, "un-supported revision\n");
+ return -EINVAL;
+ }
+ } else {
+ val = OEN_TRI_SEL_ALL_ON;
+
+ if (!priv->scale) {
+ dev_err(&client->dev, "norm select error\n");
+ return -EPERM;
+ }
+
+ dev_dbg(&client->dev, "%s %dx%d\n",
+ priv->scale->name,
+ priv->scale->width,
+ priv->scale->height);
+ }
+
+ ret = tw9910_mask_set(client, OPFORM, OEN_TRI_SEL_MASK, val);
+ if (ret < 0)
+ return ret;
+
+ return tw9910_power(client, enable);
+}
+
+static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ *norm = priv->norm;
+
+ return 0;
+}
+
+static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+ const unsigned hact = 720;
+ const unsigned hdelay = 15;
+ unsigned vact;
+ unsigned vdelay;
+ int ret;
+
+ if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL)))
+ return -EINVAL;
+
+ priv->norm = norm;
+ if (norm & V4L2_STD_525_60) {
+ vact = 240;
+ vdelay = 18;
+ ret = tw9910_mask_set(client, VVBI, 0x10, 0x10);
+ } else {
+ vact = 288;
+ vdelay = 24;
+ ret = tw9910_mask_set(client, VVBI, 0x10, 0x00);
+ }
+ if (!ret)
+ ret = i2c_smbus_write_byte_data(client, CROP_HI,
+ ((vdelay >> 2) & 0xc0) |
+ ((vact >> 4) & 0x30) |
+ ((hdelay >> 6) & 0x0c) |
+ ((hact >> 8) & 0x03));
+ if (!ret)
+ ret = i2c_smbus_write_byte_data(client, VDELAY_LO,
+ vdelay & 0xff);
+ if (!ret)
+ ret = i2c_smbus_write_byte_data(client, VACTIVE_LO,
+ vact & 0xff);
+
+ return ret;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int tw9910_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+
+ if (reg->reg > 0xff)
+ return -EINVAL;
+
+ reg->size = 1;
+ ret = i2c_smbus_read_byte_data(client, reg->reg);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * ret = int
+ * reg->val = __u64
+ */
+ reg->val = (__u64)ret;
+
+ return 0;
+}
+
+static int tw9910_s_register(struct v4l2_subdev *sd,
+ const struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (reg->reg > 0xff ||
+ reg->val > 0xff)
+ return -EINVAL;
+
+ return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
+}
+#endif
+
+static int tw9910_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
+}
+
+static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+ int ret = -EINVAL;
+ u8 val;
+
+ /*
+ * select suitable norm
+ */
+ priv->scale = tw9910_select_norm(priv->norm, *width, *height);
+ if (!priv->scale)
+ goto tw9910_set_fmt_error;
+
+ /*
+ * reset hardware
+ */
+ tw9910_reset(client);
+
+ /*
+ * set bus width
+ */
+ val = 0x00;
+ if (SOCAM_DATAWIDTH_16 == priv->info->buswidth)
+ val = LEN;
+
+ ret = tw9910_mask_set(client, OPFORM, LEN, val);
+ if (ret < 0)
+ goto tw9910_set_fmt_error;
+
+ /*
+ * select MPOUT behavior
+ */
+ switch (priv->info->mpout) {
+ case TW9910_MPO_VLOSS:
+ val = RTSEL_VLOSS; break;
+ case TW9910_MPO_HLOCK:
+ val = RTSEL_HLOCK; break;
+ case TW9910_MPO_SLOCK:
+ val = RTSEL_SLOCK; break;
+ case TW9910_MPO_VLOCK:
+ val = RTSEL_VLOCK; break;
+ case TW9910_MPO_MONO:
+ val = RTSEL_MONO; break;
+ case TW9910_MPO_DET50:
+ val = RTSEL_DET50; break;
+ case TW9910_MPO_FIELD:
+ val = RTSEL_FIELD; break;
+ case TW9910_MPO_RTCO:
+ val = RTSEL_RTCO; break;
+ default:
+ val = 0;
+ }
+
+ ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val);
+ if (ret < 0)
+ goto tw9910_set_fmt_error;
+
+ /*
+ * set scale
+ */
+ ret = tw9910_set_scale(client, priv->scale);
+ if (ret < 0)
+ goto tw9910_set_fmt_error;
+
+ /*
+ * set hsync
+ */
+ ret = tw9910_set_hsync(client);
+ if (ret < 0)
+ goto tw9910_set_fmt_error;
+
+ *width = priv->scale->width;
+ *height = priv->scale->height;
+
+ return ret;
+
+tw9910_set_fmt_error:
+
+ tw9910_reset(client);
+ priv->scale = NULL;
+
+ return ret;
+}
+
+static int tw9910_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+ return -EINVAL;
+ /* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported */
+ if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS)
+ return -EINVAL;
+
+ sel->r.left = 0;
+ sel->r.top = 0;
+ if (priv->norm & V4L2_STD_NTSC) {
+ sel->r.width = 640;
+ sel->r.height = 480;
+ } else {
+ sel->r.width = 768;
+ sel->r.height = 576;
+ }
+ return 0;
+}
+
+static int tw9910_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *mf = &format->format;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ if (format->pad)
+ return -EINVAL;
+
+ if (!priv->scale) {
+ priv->scale = tw9910_select_norm(priv->norm, 640, 480);
+ if (!priv->scale)
+ return -EINVAL;
+ }
+
+ mf->width = priv->scale->width;
+ mf->height = priv->scale->height;
+ mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ mf->field = V4L2_FIELD_INTERLACED_BT;
+
+ return 0;
+}
+
+static int tw9910_s_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *mf)
+{
+ u32 width = mf->width, height = mf->height;
+ int ret;
+
+ WARN_ON(mf->field != V4L2_FIELD_ANY &&
+ mf->field != V4L2_FIELD_INTERLACED_BT);
+
+ /*
+ * check color format
+ */
+ if (mf->code != MEDIA_BUS_FMT_UYVY8_2X8)
+ return -EINVAL;
+
+ mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+ ret = tw9910_set_frame(sd, &width, &height);
+ if (!ret) {
+ mf->width = width;
+ mf->height = height;
+ }
+ return ret;
+}
+
+static int tw9910_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *mf = &format->format;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+ const struct tw9910_scale_ctrl *scale;
+
+ if (format->pad)
+ return -EINVAL;
+
+ if (V4L2_FIELD_ANY == mf->field) {
+ mf->field = V4L2_FIELD_INTERLACED_BT;
+ } else if (V4L2_FIELD_INTERLACED_BT != mf->field) {
+ dev_err(&client->dev, "Field type %d invalid.\n", mf->field);
+ return -EINVAL;
+ }
+
+ mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+ /*
+ * select suitable norm
+ */
+ scale = tw9910_select_norm(priv->norm, mf->width, mf->height);
+ if (!scale)
+ return -EINVAL;
+
+ mf->width = scale->width;
+ mf->height = scale->height;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ return tw9910_s_fmt(sd, mf);
+ cfg->try_fmt = *mf;
+ return 0;
+}
+
+static int tw9910_video_probe(struct i2c_client *client)
+{
+ struct tw9910_priv *priv = to_tw9910(client);
+ s32 id;
+ int ret;
+
+ /*
+ * tw9910 only use 8 or 16 bit bus width
+ */
+ if (SOCAM_DATAWIDTH_16 != priv->info->buswidth &&
+ SOCAM_DATAWIDTH_8 != priv->info->buswidth) {
+ dev_err(&client->dev, "bus width error\n");
+ return -ENODEV;
+ }
+
+ ret = tw9910_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * check and show Product ID
+ * So far only revisions 0 and 1 have been seen
+ */
+ id = i2c_smbus_read_byte_data(client, ID);
+ priv->revision = GET_REV(id);
+ id = GET_ID(id);
+
+ if (0x0B != id ||
+ 0x01 < priv->revision) {
+ dev_err(&client->dev,
+ "Product ID error %x:%x\n",
+ id, priv->revision);
+ ret = -ENODEV;
+ goto done;
+ }
+
+ dev_info(&client->dev,
+ "tw9910 Product ID %0x:%0x\n", id, priv->revision);
+
+ priv->norm = V4L2_STD_NTSC;
+ priv->scale = &tw9910_ntsc_scales[0];
+
+done:
+ tw9910_s_power(&priv->subdev, 0);
+ return ret;
+}
+
+static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = tw9910_g_register,
+ .s_register = tw9910_s_register,
+#endif
+ .s_power = tw9910_s_power,
+};
+
+static int tw9910_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ return 0;
+}
+
+static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+ return 0;
+}
+
+static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+ u8 val = VSSL_VVALID | HSSL_DVALID;
+ unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+ /*
+ * set OUTCTR1
+ *
+ * We use VVALID and DVALID signals to control VSYNC and HSYNC
+ * outputs, in this mode their polarity is inverted.
+ */
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+ val |= HSP_HI;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+ val |= VSP_HI;
+
+ return i2c_smbus_write_byte_data(client, OUTCTR1, val);
+}
+
+static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
+{
+ *norm = V4L2_STD_NTSC | V4L2_STD_PAL;
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
+ .s_std = tw9910_s_std,
+ .g_std = tw9910_g_std,
+ .s_stream = tw9910_s_stream,
+ .g_mbus_config = tw9910_g_mbus_config,
+ .s_mbus_config = tw9910_s_mbus_config,
+ .g_tvnorms = tw9910_g_tvnorms,
+};
+
+static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = {
+ .enum_mbus_code = tw9910_enum_mbus_code,
+ .get_selection = tw9910_get_selection,
+ .get_fmt = tw9910_get_fmt,
+ .set_fmt = tw9910_set_fmt,
+};
+
+static const struct v4l2_subdev_ops tw9910_subdev_ops = {
+ .core = &tw9910_subdev_core_ops,
+ .video = &tw9910_subdev_video_ops,
+ .pad = &tw9910_subdev_pad_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+
+static int tw9910_probe(struct i2c_client *client,
+ const struct i2c_device_id *did)
+
+{
+ struct tw9910_priv *priv;
+ struct tw9910_video_info *info;
+ struct i2c_adapter *adapter =
+ to_i2c_adapter(client->dev.parent);
+ struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+ int ret;
+
+ if (!ssdd || !ssdd->drv_priv) {
+ dev_err(&client->dev, "TW9910: missing platform data!\n");
+ return -EINVAL;
+ }
+
+ info = ssdd->drv_priv;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev,
+ "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n");
+ return -EIO;
+ }
+
+ priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->info = info;
+
+ v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
+
+ priv->clk = v4l2_clk_get(&client->dev, "mclk");
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ ret = tw9910_video_probe(client);
+ if (ret < 0)
+ v4l2_clk_put(priv->clk);
+
+ return ret;
+}
+
+static int tw9910_remove(struct i2c_client *client)
+{
+ struct tw9910_priv *priv = to_tw9910(client);
+ v4l2_clk_put(priv->clk);
+ return 0;
+}
+
+static const struct i2c_device_id tw9910_id[] = {
+ { "tw9910", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tw9910_id);
+
+static struct i2c_driver tw9910_i2c_driver = {
+ .driver = {
+ .name = "tw9910",
+ },
+ .probe = tw9910_probe,
+ .remove = tw9910_remove,
+ .id_table = tw9910_id,
+};
+
+module_i2c_driver(tw9910_i2c_driver);
+
+MODULE_DESCRIPTION("SoC Camera driver for tw9910");
+MODULE_AUTHOR("Kuninori Morimoto");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Add renesas-ceu header file.
Do not remove the existing sh_mobile_ceu.h one as long as the original
driver does not go away.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
---
include/media/drv-intf/renesas-ceu.h | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 include/media/drv-intf/renesas-ceu.h
diff --git a/include/media/drv-intf/renesas-ceu.h b/include/media/drv-intf/renesas-ceu.h
new file mode 100644
index 0000000..52841d1
--- /dev/null
+++ b/include/media/drv-intf/renesas-ceu.h
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * renesas-ceu.h - Renesas CEU driver interface
+ *
+ * Copyright 2017-2018 Jacopo Mondi <[email protected]>
+ */
+
+#ifndef __MEDIA_DRV_INTF_RENESAS_CEU_H__
+#define __MEDIA_DRV_INTF_RENESAS_CEU_H__
+
+#define CEU_MAX_SUBDEVS 2
+
+struct ceu_async_subdev {
+ unsigned long flags;
+ unsigned char bus_width;
+ unsigned char bus_shift;
+ unsigned int i2c_adapter_id;
+ unsigned int i2c_address;
+};
+
+struct ceu_platform_data {
+ unsigned int num_subdevs;
+ struct ceu_async_subdev subdevs[CEU_MAX_SUBDEVS];
+};
+
+#endif /* ___MEDIA_DRV_INTF_RENESAS_CEU_H__ */
--
2.7.4
On Wed, Feb 21, 2018 at 06:47:58PM +0100, Jacopo Mondi wrote:
> Add Capture Engine Unit (CEU) node to device tree.
>
> Signed-off-by: Jacopo Mondi <[email protected]>
> Reviewed-by: Geert Uytterhoeven <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
> Acked-by: Hans Verkuil <[email protected]>
This patch depends on the binding for "renesas,r7s72100-ceu".
Please repost or otherwise ping me once that dependency has been accepted.
On 02/21/18 18:47, Jacopo Mondi wrote:
> Add driver for Renesas Capture Engine Unit (CEU).
>
> The CEU interface supports capturing 'data' (YUV422) and 'images'
> (NV[12|21|16|61]).
>
> This driver aims to replace the soc_camera-based sh_mobile_ceu one.
>
> Tested with ov7670 camera sensor, providing YUYV_2X8 data on Renesas RZ
> platform GR-Peach.
>
> Tested with ov7725 camera sensor on SH4 platform Migo-R.
>
> Signed-off-by: Jacopo Mondi <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
I get these warnings when I try to compile this driver:
CC [M] drivers/media/platform/renesas-ceu.o
drivers/media/platform/renesas-ceu.c: In function ‘ceu_start_streaming’:
drivers/media/platform/renesas-ceu.c:290:2: warning: ‘cdwdr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
iowrite32(data, priv->base + reg_offs);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/renesas-ceu.c:338:27: note: ‘cdwdr’ was declared here
u32 camcr, cdocr, cfzsr, cdwdr, capwr;
^~~~~
drivers/media/platform/renesas-ceu.c:290:2: warning: ‘cfzsr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
iowrite32(data, priv->base + reg_offs);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/renesas-ceu.c:338:20: note: ‘cfzsr’ was declared here
u32 camcr, cdocr, cfzsr, cdwdr, capwr;
^~~~~
drivers/media/platform/renesas-ceu.c:418:8: warning: ‘camcr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
camcr |= mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/renesas-ceu.c:338:6: note: ‘camcr’ was declared here
u32 camcr, cdocr, cfzsr, cdwdr, capwr;
^~~~~
drivers/media/platform/renesas-ceu.c: In function ‘ceu_probe’:
drivers/media/platform/renesas-ceu.c:1632:9: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return ret;
^~~
cc1: some warnings being treated as errors
The last warning is indeed correct.
The others are only right if pixelformat is illegal, which can't happen.
I'd add a:
default:
return -EINVAL;
to the switch, this shuts up the warnings.
So I need a v11 (just for this patch) after all.
Regards,
Hans
Hi Simon,
On Wed, Feb 21, 2018 at 07:29:18PM +0100, Simon Horman wrote:
> On Wed, Feb 21, 2018 at 06:47:58PM +0100, Jacopo Mondi wrote:
> > Add Capture Engine Unit (CEU) node to device tree.
> >
> > Signed-off-by: Jacopo Mondi <[email protected]>
> > Reviewed-by: Geert Uytterhoeven <[email protected]>
> > Reviewed-by: Laurent Pinchart <[email protected]>
> > Acked-by: Hans Verkuil <[email protected]>
>
> This patch depends on the binding for "renesas,r7s72100-ceu".
> Please repost or otherwise ping me once that dependency has been accepted.
Bindings for the CEU interface went in v4.17-rc1.
Could you please resurect this patch?
Thanks
j
Hi Simon,
On Tue, Apr 24, 2018 at 10:23:56AM +0200, Simon Horman wrote:
> On Mon, Apr 23, 2018 at 05:21:43PM +0200, jacopo mondi wrote:
> > Hi Simon,
> >
> > On Wed, Feb 21, 2018 at 07:29:18PM +0100, Simon Horman wrote:
> > > On Wed, Feb 21, 2018 at 06:47:58PM +0100, Jacopo Mondi wrote:
> > > > Add Capture Engine Unit (CEU) node to device tree.
> > > >
> > > > Signed-off-by: Jacopo Mondi <[email protected]>
> > > > Reviewed-by: Geert Uytterhoeven <[email protected]>
> > > > Reviewed-by: Laurent Pinchart <[email protected]>
> > > > Acked-by: Hans Verkuil <[email protected]>
> > >
> > > This patch depends on the binding for "renesas,r7s72100-ceu".
> > > Please repost or otherwise ping me once that dependency has been accepted.
> >
> > Bindings for the CEU interface went in v4.17-rc1.
> >
> > Could you please resurect this patch?
>
> Sure, I took the liberty of "rebasing" it to preserve the new node-order
> of r7s72100.dtsi. The result is as follows:
That's even better.
Thanks
j
>
> From: Jacopo Mondi <[email protected]>
> Subject: [PATCH] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
>
> Add Capture Engine Unit (CEU) node to device tree.
>
> Signed-off-by: Jacopo Mondi <[email protected]>
> Reviewed-by: Geert Uytterhoeven <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
> Acked-by: Hans Verkuil <[email protected]>
> [simon: rebased]
> Signed-off-by: Simon Horman <[email protected]>
> ---
> arch/arm/boot/dts/r7s72100.dtsi | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
> index ecf9516bcda8..4a1aade0e751 100644
> --- a/arch/arm/boot/dts/r7s72100.dtsi
> +++ b/arch/arm/boot/dts/r7s72100.dtsi
> @@ -375,6 +375,15 @@
> status = "disabled";
> };
>
> + ceu: camera@e8210000 {
> + reg = <0xe8210000 0x3000>;
> + compatible = "renesas,r7s72100-ceu";
> + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp6_clks R7S72100_CLK_CEU>;
> + power-domains = <&cpg_clocks>;
> + status = "disabled";
> + };
> +
> wdt: watchdog@fcfe0000 {
> compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
> reg = <0xfcfe0000 0x6>;
> @@ -429,9 +438,9 @@
> #clock-cells = <1>;
> compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
> reg = <0xfcfe042c 4>;
> - clocks = <&p0_clk>;
> - clock-indices = <R7S72100_CLK_RTC>;
> - clock-output-names = "rtc";
> + clocks = <&b_clk>, <&p0_clk>;
> + clock-indices = <R7S72100_CLK_CEU R7S72100_CLK_RTC>;
> + clock-output-names = "ceu", "rtc";
> };
>
> mstp7_clks: mstp7_clks@fcfe0430 {
> --
> 2.11.0
>
>
On Mon, Apr 23, 2018 at 05:21:43PM +0200, jacopo mondi wrote:
> Hi Simon,
>
> On Wed, Feb 21, 2018 at 07:29:18PM +0100, Simon Horman wrote:
> > On Wed, Feb 21, 2018 at 06:47:58PM +0100, Jacopo Mondi wrote:
> > > Add Capture Engine Unit (CEU) node to device tree.
> > >
> > > Signed-off-by: Jacopo Mondi <[email protected]>
> > > Reviewed-by: Geert Uytterhoeven <[email protected]>
> > > Reviewed-by: Laurent Pinchart <[email protected]>
> > > Acked-by: Hans Verkuil <[email protected]>
> >
> > This patch depends on the binding for "renesas,r7s72100-ceu".
> > Please repost or otherwise ping me once that dependency has been accepted.
>
> Bindings for the CEU interface went in v4.17-rc1.
>
> Could you please resurect this patch?
Sure, I took the liberty of "rebasing" it to preserve the new node-order
of r7s72100.dtsi. The result is as follows:
From: Jacopo Mondi <[email protected]>
Subject: [PATCH] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
Add Capture Engine Unit (CEU) node to device tree.
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
[simon: rebased]
Signed-off-by: Simon Horman <[email protected]>
---
arch/arm/boot/dts/r7s72100.dtsi | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ecf9516bcda8..4a1aade0e751 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -375,6 +375,15 @@
status = "disabled";
};
+ ceu: camera@e8210000 {
+ reg = <0xe8210000 0x3000>;
+ compatible = "renesas,r7s72100-ceu";
+ interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
wdt: watchdog@fcfe0000 {
compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
reg = <0xfcfe0000 0x6>;
@@ -429,9 +438,9 @@
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xfcfe042c 4>;
- clocks = <&p0_clk>;
- clock-indices = <R7S72100_CLK_RTC>;
- clock-output-names = "rtc";
+ clocks = <&b_clk>, <&p0_clk>;
+ clock-indices = <R7S72100_CLK_CEU R7S72100_CLK_RTC>;
+ clock-output-names = "ceu", "rtc";
};
mstp7_clks: mstp7_clks@fcfe0430 {
--
2.11.0