From: Naga Sureshkumar Relli <[email protected]>
Add pl353 static memory controller devicetree binding information.
Signed-off-by: Naga Sureshkumar Relli <[email protected]>
---
Changes in v8:
- None
Changes in v7:
- Corrected clocks description
- prefixed '#' for address and size cells
Changes in v6:
- None
Changes in v5:
- Removed timing properties
Changes in v4:
- none
Changes in v3:
- none
Changes in v2:
- modified timing binding info as per onfi timing parameters
- add suffix nano second as timing unit
- modified the clock names as per the IP spec
---
.../bindings/memory-controllers/pl353-smc.txt | 53 ++++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
new file mode 100644
index 0000000..551e66b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -0,0 +1,53 @@
+Device tree bindings for ARM PL353 static memory controller
+
+PL353 static memory controller supports two kinds of memory
+interfaces.i.e NAND and SRAM/NOR interfaces.
+The actual devices are instantiated from the child nodes of pl353 smc node.
+
+Required properties:
+- compatible : Should be "arm,pl353-smc-r2p1"
+- reg : Controller registers map and length.
+- clock-names : List of input clock names - "ref_clk", "aper_clk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+- address-cells : Address cells, must be 1.
+- size-cells : Size cells. Must be 1.
+
+Child nodes:
+ For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
+supported as child nodes.
+
+Mandatory timing properties for child nodes:
+- arm,nand-cycle-t0 : Read cycle time(t_rc).
+- arm,nand-cycle-t1 : Write cycle time(t_wc).
+- arm,nand-cycle-t2 : re_n assertion delay(t_rea).
+- arm,nand-cycle-t3 : we_n de-assertion delay(t_wp).
+- arm,nand-cycle-t4 : Status read time(t_clr)
+- arm,nand-cycle-t5 : ID read time(t_ar)
+- arm,nand-cycle-t6 : busy to re_n(t_rr)
+
+for nand partition information please refer the below file
+Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+ pl353smcc_0: pl353smcc@e000e000 {
+ compatible = "arm,pl353-smc-r2p1"
+ clock-names = "memclk", "aclk";
+ clocks = <&clkc 11>, <&clkc 44>;
+ reg = <0xe000e000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ nand_0: nand@e1000000 {
+ compatible = "arm,pl353-nand-r2p1"
+ reg = <0xe1000000 0x1000000>;
+ arm,nand-cycle-t0 = <0x4>;
+ arm,nand-cycle-t1 = <0x4>;
+ arm,nand-cycle-t2 = <0x1>;
+ arm,nand-cycle-t3 = <0x2>;
+ arm,nand-cycle-t4 = <0x2>;
+ arm,nand-cycle-t5 = <0x2>;
+ arm,nand-cycle-t6 = <0x4>;
+ (...)
+ };
+ };
--
2.7.4