2018-03-16 09:47:57

by Manu Gautam

Subject: [PATCH 3/6] dt-bindings: phy-qcom-qmp: Update bindings for sdm845

Update compatible strings for USB3 PHYs on SDM845.
One is QMPv3 DisplayPort-USB combo PHY and other one
is USB UNI PHY which is single lane USB3 PHY without
DP capability.

Signed-off-by: Manu Gautam <[email protected]>
---
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index dcf1b8f..cef8765 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,7 +9,9 @@ Required properties:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
- "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
+ "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy,
+ "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
+ "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.

- reg: offset and length of register set for PHY's common serdes block.

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

2018-03-18 12:54:27

by Rob Herring (Arm)

Subject: Re: [PATCH 3/6] dt-bindings: phy-qcom-qmp: Update bindings for sdm845

On Fri, Mar 16, 2018 at 03:14:56PM +0530, Manu Gautam wrote:
> Update compatible strings for USB3 PHYs on SDM845.
> One is QMPv3 DisplayPort-USB combo PHY and other one
> is USB UNI PHY which is single lane USB3 PHY without
> DP capability.
>
> Signed-off-by: Manu Gautam <[email protected]>
> ---
> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)

Reviewed-by: Rob Herring <[email protected]>