The VR9 phy ids are matching only for the SoC version 1.2. Rename the
macros and change the names to take this into account.
Signed-off-by: Mathias Kresin <[email protected]>
---
drivers/net/phy/intel-xway.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
index a11f80c..c7eff67 100644
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -149,8 +149,8 @@
#define PHY_ID_PHY22F_1_4 0xD565A410
#define PHY_ID_PHY11G_1_5 0xD565A401
#define PHY_ID_PHY22F_1_5 0xD565A411
-#define PHY_ID_PHY11G_VR9 0xD565A409
-#define PHY_ID_PHY22F_VR9 0xD565A419
+#define PHY_ID_PHY11G_VR9_1_2 0xD565A409
+#define PHY_ID_PHY22F_VR9_1_2 0xD565A419
static int xway_gphy_config_init(struct phy_device *phydev)
{
@@ -312,9 +312,9 @@ static struct phy_driver xway_gphy[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = PHY_ID_PHY11G_VR9,
+ .phy_id = PHY_ID_PHY11G_VR9_1_2,
.phy_id_mask = 0xffffffff,
- .name = "Intel XWAY PHY11G (xRX integrated)",
+ .name = "Intel XWAY PHY11G (xRX v1.2 integrated)",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = xway_gphy_config_init,
@@ -324,9 +324,9 @@ static struct phy_driver xway_gphy[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = PHY_ID_PHY22F_VR9,
+ .phy_id = PHY_ID_PHY22F_VR9_1_2,
.phy_id_mask = 0xffffffff,
- .name = "Intel XWAY PHY22F (xRX integrated)",
+ .name = "Intel XWAY PHY22F (xRX v1.2 integrated)",
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = xway_gphy_config_init,
@@ -346,8 +346,8 @@ static struct mdio_device_id __maybe_unused xway_gphy_tbl[] = {
{ PHY_ID_PHY22F_1_4, 0xffffffff },
{ PHY_ID_PHY11G_1_5, 0xffffffff },
{ PHY_ID_PHY22F_1_5, 0xffffffff },
- { PHY_ID_PHY11G_VR9, 0xffffffff },
- { PHY_ID_PHY22F_VR9, 0xffffffff },
+ { PHY_ID_PHY11G_VR9_1_2, 0xffffffff },
+ { PHY_ID_PHY22F_VR9_1_2, 0xffffffff },
{ }
};
MODULE_DEVICE_TABLE(mdio, xway_gphy_tbl);
--
2.7.4
The phys embedded into the v1.1 of the VR9 SoC are using different phy
ids. Add the phy ids to use the driver for this VR9 version as well.
Signed-off-by: Mathias Kresin <[email protected]>
---
drivers/net/phy/intel-xway.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
index c7eff67..7d936fb 100644
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -149,6 +149,8 @@
#define PHY_ID_PHY22F_1_4 0xD565A410
#define PHY_ID_PHY11G_1_5 0xD565A401
#define PHY_ID_PHY22F_1_5 0xD565A411
+#define PHY_ID_PHY11G_VR9_1_1 0xD565A408
+#define PHY_ID_PHY22F_VR9_1_1 0xD565A418
#define PHY_ID_PHY11G_VR9_1_2 0xD565A409
#define PHY_ID_PHY22F_VR9_1_2 0xD565A419
@@ -312,6 +314,30 @@ static struct phy_driver xway_gphy[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
+ .phy_id = PHY_ID_PHY11G_VR9_1_1,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY11G (xRX v1.1 integrated)",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
+ .phy_id = PHY_ID_PHY22F_VR9_1_1,
+ .phy_id_mask = 0xffffffff,
+ .name = "Intel XWAY PHY22F (xRX v1.1 integrated)",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = xway_gphy_config_init,
+ .ack_interrupt = xway_gphy_ack_interrupt,
+ .did_interrupt = xway_gphy_did_interrupt,
+ .config_intr = xway_gphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }, {
.phy_id = PHY_ID_PHY11G_VR9_1_2,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (xRX v1.2 integrated)",
@@ -346,6 +372,8 @@ static struct mdio_device_id __maybe_unused xway_gphy_tbl[] = {
{ PHY_ID_PHY22F_1_4, 0xffffffff },
{ PHY_ID_PHY11G_1_5, 0xffffffff },
{ PHY_ID_PHY22F_1_5, 0xffffffff },
+ { PHY_ID_PHY11G_VR9_1_1, 0xffffffff },
+ { PHY_ID_PHY22F_VR9_1_1, 0xffffffff },
{ PHY_ID_PHY11G_VR9_1_2, 0xffffffff },
{ PHY_ID_PHY22F_VR9_1_2, 0xffffffff },
{ }
--
2.7.4
From: Mathias Kresin <[email protected]>
Date: Thu, 22 Mar 2018 23:31:39 +0100
> The phys embedded into the v1.1 of the VR9 SoC are using different phy
> ids. Add the phy ids to use the driver for this VR9 version as well.
>
> Signed-off-by: Mathias Kresin <[email protected]>
Also applied, thank you.
From: Mathias Kresin <[email protected]>
Date: Thu, 22 Mar 2018 23:31:38 +0100
> The VR9 phy ids are matching only for the SoC version 1.2. Rename the
> macros and change the names to take this into account.
>
> Signed-off-by: Mathias Kresin <[email protected]>
Applied.