ECMP (equal-cost multipath) hashes are typically computed on the packets'
5-tuple(src IP, dst IP, src port, dst port, L4 proto).
For encapsulated packets, the L4 data is not readily available and ECMP
hashing will often revert to (src IP, dst IP). This will lead to traffic
polarization on a single ECMP path, causing congestion and waste of network
capacity.
In IPv6, the 20-bit flow label field is also used as part of the ECMP
hash. In the lack of L4 data, the hashing will be on (src IP, dst IP,
flow label). Having a non-zero flow label is thus important for proper
traffic load balancing when L4 data is unavailable (i.e., when packets
are encapsulated).
Currently, the seg6_do_srh_encap() function extracts the original packet's
flow label and set it as the outer IPv6 flow label. There are two issues
with this behaviour:
a) There is no guarantee that the inner flow label is set by the source.
b) If the original packet is not IPv6, the flow label will be set to
zero (e.g., IPv4 or L2 encap).
This patch adds a function, named seg6_make_flowlabel(), that computes a
flow label from a given skb. It supports IPv6, IPv4 and L2 payloads, and
leverages the per namespace 'seg6_flowlabel" sysctl value.
The currently support behaviours are as follows:
-1 set flowlabel to zero.
0 copy flowlabel from Inner paceket in case of Inner IPv6
(Set flowlabel to 0 in case IPv4/L2)
1 Compute the flowlabel using seg6_make_flowlabel()
This patch has been tested for IPv6, IPv4, and L2 traffic.
Signed-off-by: Ahmed Abdelsalam <[email protected]>
---
include/net/netns/ipv6.h | 1 +
net/ipv6/seg6_iptunnel.c | 24 ++++++++++++++++++++++--
net/ipv6/sysctl_net_ipv6.c | 8 ++++++++
3 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h
index 97b3a54..c978a31 100644
--- a/include/net/netns/ipv6.h
+++ b/include/net/netns/ipv6.h
@@ -43,6 +43,7 @@ struct netns_sysctl_ipv6 {
int max_hbh_opts_cnt;
int max_dst_opts_len;
int max_hbh_opts_len;
+ int seg6_flowlabel;
};
struct netns_ipv6 {
diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
index 5fe1394..3d9cd86 100644
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -91,6 +91,24 @@ static void set_tun_src(struct net *net, struct net_device *dev,
rcu_read_unlock();
}
+/* Compute flowlabel for outer IPv6 header */
+__be32 seg6_make_flowlabel(struct net *net, struct sk_buff *skb,
+ struct ipv6hdr *inner_hdr)
+{
+ int do_flowlabel = net->ipv6.sysctl.seg6_flowlabel;
+ __be32 flowlabel = 0;
+ u32 hash;
+
+ if (do_flowlabel > 0) {
+ hash = skb_get_hash(skb);
+ rol32(hash, 16);
+ flowlabel = (__force __be32)hash & IPV6_FLOWLABEL_MASK;
+ } else if (!do_flowlabel && skb->protocol == htons(ETH_P_IPV6)) {
+ flowlabel = ip6_flowlabel(inner_hdr);
+ }
+ return flowlabel;
+}
+
/* encapsulate an IPv6 packet within an outer IPv6 header with a given SRH */
int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
{
@@ -99,6 +117,7 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
struct ipv6hdr *hdr, *inner_hdr;
struct ipv6_sr_hdr *isrh;
int hdrlen, tot_len, err;
+ __be32 flowlabel;
hdrlen = (osrh->hdrlen + 1) << 3;
tot_len = hdrlen + sizeof(*hdr);
@@ -119,12 +138,13 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
* decapsulation will overwrite inner hlim with outer hlim
*/
+ flowlabel = seg6_make_flowlabel(net, skb, inner_hdr);
if (skb->protocol == htons(ETH_P_IPV6)) {
ip6_flow_hdr(hdr, ip6_tclass(ip6_flowinfo(inner_hdr)),
- ip6_flowlabel(inner_hdr));
+ flowlabel);
hdr->hop_limit = inner_hdr->hop_limit;
} else {
- ip6_flow_hdr(hdr, 0, 0);
+ ip6_flow_hdr(hdr, 0, flowlabel);
hdr->hop_limit = ip6_dst_hoplimit(skb_dst(skb));
}
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 6fbdef6..e15cd37 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -152,6 +152,13 @@ static struct ctl_table ipv6_table_template[] = {
.extra1 = &zero,
.extra2 = &one,
},
+ {
+ .procname = "seg6_flowlabel",
+ .data = &init_net.ipv6.sysctl.seg6_flowlabel,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec
+ },
{ }
};
@@ -217,6 +224,7 @@ static int __net_init ipv6_sysctl_net_init(struct net *net)
ipv6_table[12].data = &net->ipv6.sysctl.max_dst_opts_len;
ipv6_table[13].data = &net->ipv6.sysctl.max_hbh_opts_len;
ipv6_table[14].data = &net->ipv6.sysctl.multipath_hash_policy,
+ ipv6_table[15].data = &net->ipv6.sysctl.seg6_flowlabel;
ipv6_route_table = ipv6_route_sysctl_init(net);
if (!ipv6_route_table)
--
2.1.4
On Tue, 24 Apr 2018 19:59:55 +0200
Ahmed Abdelsalam <[email protected]> wrote:
> This patch has been tested for IPv6, IPv4, and L2 traffic.
>
> Signed-off-by: Ahmed Abdelsalam <[email protected]>
> ---
> include/net/netns/ipv6.h | 1 +
> net/ipv6/seg6_iptunnel.c | 24 ++++++++++++++++++++++--
> net/ipv6/sysctl_net_ipv6.c | 8 ++++++++
> 3 files changed, 31 insertions(+), 2 deletions(-)
>
> diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h
> index 97b3a54..c978a31 100644
> --- a/include/net/netns/ipv6.h
> +++ b/include/net/netns/ipv6.h
> @@ -43,6 +43,7 @@ struct netns_sysctl_ipv6 {
> int max_hbh_opts_cnt;
> int max_dst_opts_len;
> int max_hbh_opts_len;
> + int seg6_flowlabel;
> };
>
> struct netns_ipv6 {
> diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
> index 5fe1394..3d9cd86 100644
> --- a/net/ipv6/seg6_iptunnel.c
> +++ b/net/ipv6/seg6_iptunnel.c
> @@ -91,6 +91,24 @@ static void set_tun_src(struct net *net, struct net_device *dev,
> rcu_read_unlock();
> }
>
> +/* Compute flowlabel for outer IPv6 header */
> +__be32 seg6_make_flowlabel(struct net *net, struct sk_buff *skb,
> + struct ipv6hdr *inner_hdr)
David, please take v3 of the patch.
I re-defined seg6_make_flowlabel () as static to fix the kbuild test robot.
--
Ahmed Abdelsalam <[email protected]>