2018-04-27 00:42:55

by Katsuhiro Suzuki

Subject: [PATCH] reset: uniphier: add LD11/LD20 stream demux system reset control

Add reset lines for MPEG2 transport stream I/O and demux system (HSC)
on UniPhier LD11/LD20 SoCs.

Signed-off-by: Katsuhiro Suzuki <[email protected]>
---
drivers/reset/reset-uniphier.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 360e06b20c53..7a3a449c4900 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -99,6 +99,7 @@ static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
UNIPHIER_RESETX(6, 0x200c, 6), /* Ether */
UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC, MIO) */
+ UNIPHIER_RESETX(9, 0x200c, 9), /* HSC */
UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
@@ -110,6 +111,7 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
UNIPHIER_RESETX(6, 0x200c, 6), /* Ether */
UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC) */
+ UNIPHIER_RESETX(9, 0x200c, 9), /* HSC */
UNIPHIER_RESETX(12, 0x200c, 5), /* GIO (PCIe, USB3) */
UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */
UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */
--
2.17.0

2018-04-27 03:15:50

by Masahiro Yamada

Subject: Re: [PATCH] reset: uniphier: add LD11/LD20 stream demux system reset control

2018-04-27 9:41 GMT+09:00 Katsuhiro Suzuki <[email protected]>:
> Add reset lines for MPEG2 transport stream I/O and demux system (HSC)
> on UniPhier LD11/LD20 SoCs.
>
> Signed-off-by: Katsuhiro Suzuki <[email protected]>
> ---

Acked-by: Masahiro Yamada <[email protected]>




--
Best Regards
Masahiro Yamada

2018-04-27 09:24:33

by Philipp Zabel

Subject: Re: [PATCH] reset: uniphier: add LD11/LD20 stream demux system reset control

On Fri, 2018-04-27 at 12:13 +0900, Masahiro Yamada wrote:
> 2018-04-27 9:41 GMT+09:00 Katsuhiro Suzuki <[email protected]>:
> > Add reset lines for MPEG2 transport stream I/O and demux system (HSC)
> > on UniPhier LD11/LD20 SoCs.
> >
> > Signed-off-by: Katsuhiro Suzuki <[email protected]>
> Acked-by: Masahiro Yamada <[email protected]>

Thank you, applied to reset/next.

regards
Philipp