Hi, Argus
On Wed, 2018-05-02 at 17:21 +0800, [email protected] wrote:
> From: Argus Lin <[email protected]>
>
> mt6797 is a highly integrated SoCs, it uses mt6351 for power
> management. We need to add pwrap support to access mt6351.
> Pwrap of mt6797 support new feature include starvation and channel
> request exception interrupt, dynamic starvation priority
> adjustment mechanism.
suggest line wrapping closely at 75 columns
>
> Signed-off-by: Argus Lin <[email protected]>
> ---
> drivers/soc/mediatek/mtk-pmic-wrap.c | 110 ++++++++++++++++++++++++++++++++---
> 1 file changed, 102 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
> index a6366f147b79..0d4a2dae6912 100644
> --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
> +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
> @@ -284,6 +284,12 @@ enum pwrap_regs {
> PWRAP_DVFS_WDATA7,
> PWRAP_SPMINF_STA,
> PWRAP_CIPHER_EN,
> +
> + /* MT6797 series regs */
> + PWRAP_INT1_EN,
> + PWRAP_INT1_FLG_RAW,
> + PWRAP_INT1_FLG,
> + PWRAP_INT1_CLR,
> };
>
> static int mt2701_regs[] = {
> @@ -372,6 +378,43 @@ static int mt2701_regs[] = {
> [PWRAP_ADC_RDATA_ADDR2] = 0x154,
> };
>
> +static int mt6797_regs[] = {
> + [PWRAP_MUX_SEL] = 0x0,
> + [PWRAP_WRAP_EN] = 0x4,
> + [PWRAP_DIO_EN] = 0x8,
> + [PWRAP_SIDLY] = 0xC,
> + [PWRAP_RDDMY] = 0x10,
> + [PWRAP_CSHEXT_WRITE] = 0x18,
> + [PWRAP_CSHEXT_READ] = 0x1C,
> + [PWRAP_CSLEXT_START] = 0x20,
> + [PWRAP_CSLEXT_END] = 0x24,
> + [PWRAP_STAUPD_PRD] = 0x28,
> + [PWRAP_HARB_HPRIO] = 0x50,
> + [PWRAP_HIPRIO_ARB_EN] = 0x54,
> + [PWRAP_MAN_EN] = 0x60,
> + [PWRAP_MAN_CMD] = 0x64,
> + [PWRAP_WACS0_EN] = 0x70,
> + [PWRAP_WACS1_EN] = 0x84,
> + [PWRAP_WACS2_EN] = 0x98,
> + [PWRAP_INIT_DONE2] = 0x9C,
> + [PWRAP_WACS2_CMD] = 0xA0,
> + [PWRAP_WACS2_RDATA] = 0xA4,
> + [PWRAP_WACS2_VLDCLR] = 0xA8,
> + [PWRAP_INT_EN] = 0xC0,
> + [PWRAP_INT_FLG_RAW] = 0xC4,
> + [PWRAP_INT_FLG] = 0xC8,
> + [PWRAP_INT_CLR] = 0xCC,
> + [PWRAP_INT1_EN] = 0xD0,
> + [PWRAP_INT1_FLG_RAW] = 0xD4,
> + [PWRAP_INT1_FLG] = 0xD8,
> + [PWRAP_INT1_CLR] = 0xDC,
> + [PWRAP_TIMER_EN] = 0xF4,
> + [PWRAP_WDT_UNIT] = 0xFC,
> + [PWRAP_WDT_SRC_EN] = 0x100,
> + [PWRAP_DCM_EN] = 0x1CC,
> + [PWRAP_DCM_DBC_PRD] = 0x1D4,
> +};
> +
trim unused registers if any
> static int mt7622_regs[] = {
> [PWRAP_MUX_SEL] = 0x0,
> [PWRAP_WRAP_EN] = 0x4,
> @@ -647,6 +690,7 @@ enum pmic_type {
>
> enum pwrap_type {
> PWRAP_MT2701,
> + PWRAP_MT6797,
> PWRAP_MT7622,
> PWRAP_MT8135,
> PWRAP_MT8173,
> @@ -1006,6 +1050,12 @@ static void pwrap_init_chip_select_ext(struct pmic_wrapper *wrp, u8 hext_write,
> static int pwrap_common_init_reg_clock(struct pmic_wrapper *wrp)
> {
> switch (wrp->master->type) {
> + case PWRAP_MT6797:
> + pwrap_writel(wrp, 0x8, PWRAP_RDDMY);
> + pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_RDDMY_NO],
> + 0x8);
> + pwrap_init_chip_select_ext(wrp, 0x88, 0x55, 3, 0);
> + break;
the setup for timing is much similar to mt2701 + mt6323
so we can merge the both logic into one, and then hope to eliminate specific pwrap_mt2701_init_reg_clock totally
> case PWRAP_MT8173:
> pwrap_init_chip_select_ext(wrp, 0, 4, 2, 2);
> break;
> @@ -1076,11 +1126,14 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
> break;
> case PWRAP_MT2701:
> case PWRAP_MT8173:
> + case PWRAP_MT6797:
need to be listed in alphabetical order
> pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
> break;
> case PWRAP_MT7622:
> pwrap_writel(wrp, 0, PWRAP_CIPHER_EN);
> break;
> + default:
> + break;
> }
>
> /* Config cipher mode @PMIC */
> @@ -1325,6 +1378,15 @@ static irqreturn_t pwrap_interrupt(int irqno, void *dev_id)
>
> pwrap_writel(wrp, 0xffffffff, PWRAP_INT_CLR);
>
> + /* If we support INT1 interrupt, we also need to clear it */
> + if (HAS_CAP(wrp->master->caps, PWRAP_CAP_INT1_EN)) {
> + rdata = pwrap_readl(wrp, PWRAP_INT1_FLG);
> +
> + dev_err(wrp->dev, "unexpected interrupt int1=0x%x\n", rdata);
> +
> + pwrap_writel(wrp, rdata, PWRAP_INT1_CLR);
> + }
> +
it seems no required to add PWRAP_CAP_INT1_EN:
the CAP is not to take any action for any INTs raised, instead, it can be disabled at initial.
> return IRQ_HANDLED;
> }
>
> @@ -1446,6 +1508,19 @@ static const struct pmic_wrapper_type pwrap_mt8173 = {
> .init_soc_specific = pwrap_mt8173_init_soc_specific,
> };
>
> +static const struct pmic_wrapper_type pwrap_mt6797 = {
> + .regs = mt6797_regs,
> + .type = PWRAP_MT6797,
> + .arb_en_all = 0x01fff,
> + .int_en_all = 0xffffffc6,
> + .int1_en_all = 0x0001ffff,
> + .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
> + .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
> + .caps = PWRAP_CAP_DCM | PWRAP_CAP_INT1_EN,
> + .init_reg_clock = pwrap_common_init_reg_clock,
> + .init_soc_specific = NULL,
> +};
> +
> static const struct of_device_id of_pwrap_match_tbl[] = {
> {
> .compatible = "mediatek,mt2701-pwrap",
> @@ -1460,6 +1535,9 @@ static const struct of_device_id of_pwrap_match_tbl[] = {
> .compatible = "mediatek,mt8173-pwrap",
> .data = &pwrap_mt8173,
> }, {
> + .compatible = "mediatek,mt6797-pwrap",
> + .data = &pwrap_mt6797,
each entry needs to be sorted in alphabetical order
> + }, {
> /* sentinel */
> }
> };
> @@ -1503,11 +1581,13 @@ static int pwrap_probe(struct platform_device *pdev)
> if (IS_ERR(wrp->base))
> return PTR_ERR(wrp->base);
>
> - wrp->rstc = devm_reset_control_get(wrp->dev, "pwrap");
> - if (IS_ERR(wrp->rstc)) {
> - ret = PTR_ERR(wrp->rstc);
> - dev_dbg(wrp->dev, "cannot get pwrap reset: %d\n", ret);
> - return ret;
> + if (HAS_CAP(wrp->master->caps, PWRAP_CAP_RESET)) {
> + wrp->rstc = devm_reset_control_get(wrp->dev, "pwrap");
there should be a reset bit present for pwrap on infrasys.
the specific condition can be dropped when the reset cell is exported from infrasys and then the device has a reference to it.
> + if (IS_ERR(wrp->rstc)) {
> + ret = PTR_ERR(wrp->rstc);
> + dev_dbg(wrp->dev, "cannot get pwrap reset: %d\n", ret);
> + return ret;
> + }
> }
>
> if (HAS_CAP(wrp->master->caps, PWRAP_CAP_BRIDGE)) {
> @@ -1549,9 +1629,17 @@ static int pwrap_probe(struct platform_device *pdev)
> if (ret)
> goto err_out1;
>
> - /* Enable internal dynamic clock */
> - pwrap_writel(wrp, 1, PWRAP_DCM_EN);
> - pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD);
> + /*
> + * add dcm capability check
> + */
> + if (HAS_CAP(wrp->master->caps, PWRAP_CAP_DCM)) {
the specific condition can be dropped since so far all devices the driver can support are owning PWRAP_CAP_DCM
> + if (wrp->master->type == PWRAP_MT6797)
> + pwrap_writel(wrp, 3, PWRAP_DCM_EN);
the setup for MT6797 can be moved into .init_soc_specific callback ?
> + else
> + pwrap_writel(wrp, 1, PWRAP_DCM_EN);
> +
> + pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD);
> + }
>
> /*
> * The PMIC could already be initialized by the bootloader.
> @@ -1580,6 +1668,12 @@ static int pwrap_probe(struct platform_device *pdev)
> pwrap_writel(wrp, wrp->master->wdt_src, PWRAP_WDT_SRC_EN);
> pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
> pwrap_writel(wrp, wrp->master->int_en_all, PWRAP_INT_EN);
> + /*
> + * We add INT1 interrupt to handle starvation and request exception
> + * If we support it, we should enable them here.
> + */
> + if (HAS_CAP(wrp->master->caps, PWRAP_CAP_INT1_EN))
> + pwrap_writel(wrp, wrp->master->int1_en_all, PWRAP_INT1_EN);
>
if there is no explicitly enabling on INT1, then ISR handling for INT1 is also unnecessary
> irq = platform_get_irq(pdev, 0);
> ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt,