New Centaur CPU support CMCI mechanism, which is compatible with INTEL CMCI.
Signed-off-by: David Wang <[email protected]>
Changes from v1 to v2:
*1, add vendor check for Centaur CPU in cmci_supported.
*2, Only call intel_init_cmci for Centaur CPU in mce_intel_feature_init function.
---
arch/x86/Kconfig | 12 ++++++++++++
arch/x86/kernel/cpu/mcheck/mce.c | 6 ++++++
arch/x86/kernel/cpu/mcheck/mce_intel.c | 21 ++++++++++++++++-----
3 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index dda87a3..1adff5f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1130,6 +1130,18 @@ config X86_MCE_AMD
Additional support for AMD specific MCE features such as
the DRAM Error Threshold.
+config X86_MCE_CENTAUR
+ def_bool y
+ prompt "CENTAUR MCE features"
+ depends on CPU_SUP_CENTAUR && X86_MCE_INTEL
+ help
+ Additional support for Centaur specific MCE features such as
+ MCE broadcasting and CMCI support.
+ New Centaur CPU support MCE broadcasting.
+ New Centaur CPU support CMCI which is fully compliant with Intel CMCI.
+
+ If unsure, say N here.
+
config X86_ANCIENT_MCE
bool "Support for old Pentium 5 / WinChip machine checks"
depends on X86_32 && X86_MCE
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index cd76380..2ebafc7 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1727,6 +1727,7 @@ static void __mcheck_cpu_init_early(struct cpuinfo_x86 *c)
}
}
+#ifdef CONFIG_X86_MCE_CENTAUR
static void mce_centaur_feature_init(struct cpuinfo_x86 *c)
{
struct mca_config *cfg = &mca_cfg;
@@ -1740,7 +1741,12 @@ static void mce_centaur_feature_init(struct cpuinfo_x86 *c)
if (cfg->monarch_timeout < 0)
cfg->monarch_timeout = USEC_PER_SEC;
}
+ mce_intel_feature_init(c);
+ mce_adjust_timer = cmci_intel_adjust_timer;
}
+#else
+static inline void mce_centaur_feature_init(struct cpuinfo_x86 *c) { }
+#endif
static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
{
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index d05be30..5b1b68f 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -85,7 +85,8 @@ static int cmci_supported(int *banks)
* initialization is vendor keyed and this
* makes sure none of the backdoors are entered otherwise.
*/
- if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+ if ((boot_cpu_data.x86_vendor != X86_VENDOR_INTEL &&
+ boot_cpu_data.x86_vendor != X86_VENDOR_CENTAUR))
return 0;
if (!boot_cpu_has(X86_FEATURE_APIC) || lapic_get_maxlvt() < 6)
return 0;
@@ -506,10 +507,20 @@ static void intel_ppin_init(struct cpuinfo_x86 *c)
void mce_intel_feature_init(struct cpuinfo_x86 *c)
{
- intel_init_thermal(c);
- intel_init_cmci();
- intel_init_lmce();
- intel_ppin_init(c);
+
+ switch (c->x86_vendor) {
+ case X86_VENDOR_INTEL:
+ intel_init_thermal(c);
+ intel_init_cmci();
+ intel_init_lmce();
+ intel_ppin_init(c);
+ break;
+ case X86_VENDOR_CENTAUR:
+ intel_init_cmci();
+ break;
+ default:
+ break;
+ }
}
void mce_intel_feature_clear(struct cpuinfo_x86 *c)
--
1.9.1
On Mon, Jun 04, 2018 at 10:37:33AM +0800, David Wang wrote:
> New Centaur CPU support CMCI mechanism, which is compatible with INTEL CMCI.
>
> Signed-off-by: David Wang <[email protected]>
...
> diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
> index cd76380..2ebafc7 100644
> --- a/arch/x86/kernel/cpu/mcheck/mce.c
> +++ b/arch/x86/kernel/cpu/mcheck/mce.c
> @@ -1727,6 +1727,7 @@ static void __mcheck_cpu_init_early(struct cpuinfo_x86 *c)
> }
> }
>
> +#ifdef CONFIG_X86_MCE_CENTAUR
> static void mce_centaur_feature_init(struct cpuinfo_x86 *c)
> {
> struct mca_config *cfg = &mca_cfg;
> @@ -1740,7 +1741,12 @@ static void mce_centaur_feature_init(struct cpuinfo_x86 *c)
> if (cfg->monarch_timeout < 0)
> cfg->monarch_timeout = USEC_PER_SEC;
> }
> + mce_intel_feature_init(c);
> + mce_adjust_timer = cmci_intel_adjust_timer;
This ...
> }
> +#else
> +static inline void mce_centaur_feature_init(struct cpuinfo_x86 *c) { }
> +#endif
>
> static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
> {
> diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
> index d05be30..5b1b68f 100644
> --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
> +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
> @@ -85,7 +85,8 @@ static int cmci_supported(int *banks)
> * initialization is vendor keyed and this
> * makes sure none of the backdoors are entered otherwise.
> */
> - if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
> + if ((boot_cpu_data.x86_vendor != X86_VENDOR_INTEL &&
> + boot_cpu_data.x86_vendor != X86_VENDOR_CENTAUR))
> return 0;
> if (!boot_cpu_has(X86_FEATURE_APIC) || lapic_get_maxlvt() < 6)
> return 0;
> @@ -506,10 +507,20 @@ static void intel_ppin_init(struct cpuinfo_x86 *c)
>
> void mce_intel_feature_init(struct cpuinfo_x86 *c)
> {
> - intel_init_thermal(c);
> - intel_init_cmci();
> - intel_init_lmce();
> - intel_ppin_init(c);
> +
> + switch (c->x86_vendor) {
> + case X86_VENDOR_INTEL:
> + intel_init_thermal(c);
> + intel_init_cmci();
> + intel_init_lmce();
> + intel_ppin_init(c);
> + break;
> + case X86_VENDOR_CENTAUR:
> + intel_init_cmci();
... and this I really don't like for the simple reason that if the Intel
side gets changed, it could potentially break Centaur. And we don't want
that. And the vendor should be free to change their code without asking
another vendor for permission even if the other vendor is almost copying
the code...
Long story short, I think you should extract the facilities you're
going to need into generic, library-like ones and call them
from centaur-specific compilation units which get enabled when
CPU_SUP_CENTAUR is enabled.
So that the code can still be shared but there's no dependency on
other vendors and so that one vendor doesn't break the other one and
vice-versa.
IMO.
Thx.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
> -----Original Mail-----
> Sender: Borislav Petkov [mailto:[email protected]]
> Time: 2018年6月26日 22:30
> Receiver: David Wang <[email protected]>
> CC: [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected]
> Topic : Re: [PATCH v2] x86/mce: add CMCI support for Centaur CPUs
>
> On Mon, Jun 04, 2018 at 10:37:33AM +0800, David Wang wrote:
> > New Centaur CPU support CMCI mechanism, which is compatible with
> INTEL CMCI.
> >
> > Signed-off-by: David Wang <[email protected]>
>
> ...
>
> > diff --git a/arch/x86/kernel/cpu/mcheck/mce.c
> > b/arch/x86/kernel/cpu/mcheck/mce.c
> > index cd76380..2ebafc7 100644
> > --- a/arch/x86/kernel/cpu/mcheck/mce.c
> > +++ b/arch/x86/kernel/cpu/mcheck/mce.c
> > @@ -1727,6 +1727,7 @@ static void __mcheck_cpu_init_early(struct
> cpuinfo_x86 *c)
> > }
> > }
> >
> > +#ifdef CONFIG_X86_MCE_CENTAUR
> > static void mce_centaur_feature_init(struct cpuinfo_x86 *c) {
> > struct mca_config *cfg = &mca_cfg;
> > @@ -1740,7 +1741,12 @@ static void mce_centaur_feature_init(struct
> cpuinfo_x86 *c)
> > if (cfg->monarch_timeout < 0)
> > cfg->monarch_timeout = USEC_PER_SEC;
> > }
> > + mce_intel_feature_init(c);
> > + mce_adjust_timer = cmci_intel_adjust_timer;
>
> This ...
>
> > }
> > +#else
> > +static inline void mce_centaur_feature_init(struct cpuinfo_x86 *c) {
> > +} #endif
> >
> > static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c) { diff
> > --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c
> > b/arch/x86/kernel/cpu/mcheck/mce_intel.c
> > index d05be30..5b1b68f 100644
> > --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
> > +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
> > @@ -85,7 +85,8 @@ static int cmci_supported(int *banks)
> > * initialization is vendor keyed and this
> > * makes sure none of the backdoors are entered otherwise.
> > */
> > - if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
> > + if ((boot_cpu_data.x86_vendor != X86_VENDOR_INTEL &&
> > + boot_cpu_data.x86_vendor != X86_VENDOR_CENTAUR))
> > return 0;
> > if (!boot_cpu_has(X86_FEATURE_APIC) || lapic_get_maxlvt() < 6)
> > return 0;
> > @@ -506,10 +507,20 @@ static void intel_ppin_init(struct cpuinfo_x86
> > *c)
> >
> > void mce_intel_feature_init(struct cpuinfo_x86 *c) {
> > - intel_init_thermal(c);
> > - intel_init_cmci();
> > - intel_init_lmce();
> > - intel_ppin_init(c);
> > +
> > + switch (c->x86_vendor) {
> > + case X86_VENDOR_INTEL:
> > + intel_init_thermal(c);
> > + intel_init_cmci();
> > + intel_init_lmce();
> > + intel_ppin_init(c);
> > + break;
> > + case X86_VENDOR_CENTAUR:
> > + intel_init_cmci();
>
> ... and this I really don't like for the simple reason that if the Intel side gets
> changed, it could potentially break Centaur. And we don't want that. And
> the vendor should be free to change their code without asking another
> vendor for permission even if the other vendor is almost copying the
> code...
>
> Long story short, I think you should extract the facilities you're going to
> need into generic, library-like ones and call them from centaur-specific
> compilation units which get enabled when CPU_SUP_CENTAUR is enabled.
>
> So that the code can still be shared but there's no dependency on other
> vendors and so that one vendor doesn't break the other one and
> vice-versa.
>
> IMO.
>
> Thx.
>
OK. I will adjust code.
Thank you.
> --
> Regards/Gruss,
> Boris.
>
> Good mailing practices for 400: avoid top-posting and trim the reply.