The portdrv code is scattered across several files, which makes it a bit of
a hassle to browse. Consolidate it all in a single file.
This is all pure code moves; no functional changes intended. Well, there
is a function rename, but it shouldn't change any behavior.
---
Bjorn Helgaas (9):
PCI/portdrv: Rename resume_iter() to prevent name collision
PCI/portdrv: Squash pieces of portdrv_core.c into portdrv_pci.c
PCI/portdrv: Squash PM-related code into portdrv_pci.c
PCI/portdrv: Squash device removal code into portdrv_pci.c
PCI/portdrv: Squash lookup interfaces into portdrv_pci.c
PCI/portdrv: Squash service driver registration into portdrv_pci.c
PCI/portdrv: Move private definitions to portdrv_pci.c
PCI/portdrv: Clean up whitespace
PCI/portdrv: Rename portdrv_pci.c to portdrv.c
drivers/pci/pcie/Makefile | 6
drivers/pci/pcie/portdrv.c | 822 +++++++++++++++++++++++++++++++++++++++
drivers/pci/pcie/portdrv.h | 15 -
drivers/pci/pcie/portdrv_core.c | 578 ---------------------------
drivers/pci/pcie/portdrv_pci.c | 261 ------------
5 files changed, 824 insertions(+), 858 deletions(-)
create mode 100644 drivers/pci/pcie/portdrv.c
delete mode 100644 drivers/pci/pcie/portdrv_core.c
delete mode 100644 drivers/pci/pcie/portdrv_pci.c
From: Bjorn Helgaas <[email protected]>
Rename resume_iter() to prevent a name collision in a future patch. No
functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/portdrv_pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 973f1b80a038..b8b99dd07c0c 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -173,7 +173,7 @@ static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
return PCI_ERS_RESULT_RECOVERED;
}
-static int resume_iter(struct device *device, void *data)
+static int err_resume_iter(struct device *device, void *data)
{
struct pcie_device *pcie_device;
struct pcie_port_service_driver *driver;
@@ -193,7 +193,7 @@ static int resume_iter(struct device *device, void *data)
static void pcie_portdrv_err_resume(struct pci_dev *dev)
{
- device_for_each_child(&dev->dev, NULL, resume_iter);
+ device_for_each_child(&dev->dev, NULL, err_resume_iter);
}
/*
From: Bjorn Helgaas <[email protected]>
Move private definitions to portdrv_pci.c. No functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/portdrv.h | 9 ---------
drivers/pci/pcie/portdrv_pci.c | 9 +++++++++
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index ab3631a61347..20344e1bf247 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -69,15 +69,6 @@ struct pcie_port_service_driver {
int pcie_port_service_register(struct pcie_port_service_driver *new);
void pcie_port_service_unregister(struct pcie_port_service_driver *new);
-/*
- * The PCIe Capability Interrupt Message Number (PCIe r3.1, sec 7.8.2) must
- * be one of the first 32 MSI-X entries. Per PCI r3.0, sec 6.8.3.1, MSI
- * supports a maximum of 32 vectors per function.
- */
-#define PCIE_PORT_MAX_MSI_ENTRIES 32
-
-#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
-
extern struct bus_type pcie_port_bus_type;
int __must_check pcie_port_bus_register(void);
void pcie_port_bus_unregister(void);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 1375e91c268f..76ad08e97a6f 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -363,6 +363,13 @@ static int pcie_message_numbers(struct pci_dev *dev, int mask,
return nvec;
}
+/*
+ * The PCIe Capability Interrupt Message Number (PCIe r3.1, sec 7.8.2) must
+ * be one of the first 32 MSI-X entries. Per PCI r3.0, sec 6.8.3.1, MSI
+ * supports a maximum of 32 vectors per function.
+ */
+#define PCIE_PORT_MAX_MSI_ENTRIES 32
+
/**
* pcie_port_enable_irq_vec - try to set up MSI-X or MSI as interrupt mode
* for given port
@@ -528,6 +535,8 @@ static int get_port_device_capability(struct pci_dev *dev)
return services;
}
+#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
+
/**
* pcie_device_init - allocate and initialize PCI Express port service device
* @pdev: PCI Express port to associate the service device with
From: Bjorn Helgaas <[email protected]>
Clean up trivial whitespace issues. No functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/portdrv_pci.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 76ad08e97a6f..4fc86d0eef9d 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -644,7 +644,7 @@ int pcie_port_device_register(struct pci_dev *dev)
* this port device.
*/
static int pcie_portdrv_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
+ const struct pci_device_id *id)
{
int status;
@@ -759,13 +759,11 @@ static void pcie_portdrv_err_resume(struct pci_dev *dev)
device_for_each_child(&dev->dev, NULL, err_resume_iter);
}
-/*
- * LINUX Device Driver Model
- */
static const struct pci_device_id port_pci_ids[] = { {
/* handle any PCI-Express port */
PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0),
- }, { /* end: all zeroes */ }
+ },
+ { }
};
static const struct pci_error_handlers pcie_portdrv_err_handler = {
@@ -777,7 +775,7 @@ static const struct pci_error_handlers pcie_portdrv_err_handler = {
static struct pci_driver pcie_portdriver = {
.name = "pcieport",
- .id_table = &port_pci_ids[0],
+ .id_table = port_pci_ids,
.probe = pcie_portdrv_probe,
.remove = pcie_portdrv_remove,
@@ -809,7 +807,7 @@ static const struct dmi_system_id pcie_portdrv_dmi_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
},
},
- {}
+ { }
};
static int __init pcie_portdrv_init(void)
From: Bjorn Helgaas <[email protected]>
Squash lookup interfaces into portdrv_pci.c. No functional change
intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/portdrv_core.c | 69 ---------------------------------------
drivers/pci/pcie/portdrv_pci.c | 68 ++++++++++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+), 69 deletions(-)
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 2ef046af08d2..77b1c1ea8885 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -19,75 +19,6 @@
#include "../pci.h"
#include "portdrv.h"
-struct portdrv_service_data {
- struct pcie_port_service_driver *drv;
- struct device *dev;
- u32 service;
-};
-
-static int find_service_iter(struct device *device, void *data)
-{
- struct pcie_port_service_driver *service_driver;
- struct portdrv_service_data *pdrvs;
- u32 service;
-
- pdrvs = (struct portdrv_service_data *) data;
- service = pdrvs->service;
-
- if (device->bus == &pcie_port_bus_type && device->driver) {
- service_driver = to_service_driver(device->driver);
- if (service_driver->service == service) {
- pdrvs->drv = service_driver;
- pdrvs->dev = device;
- return 1;
- }
- }
-
- return 0;
-}
-
-/**
- * pcie_port_find_service - find the service driver
- * @dev: PCI Express port the service is associated with
- * @service: Service to find
- *
- * Find PCI Express port service driver associated with given service
- */
-struct pcie_port_service_driver *pcie_port_find_service(struct pci_dev *dev,
- u32 service)
-{
- struct pcie_port_service_driver *drv;
- struct portdrv_service_data pdrvs;
-
- pdrvs.drv = NULL;
- pdrvs.service = service;
- device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
-
- drv = pdrvs.drv;
- return drv;
-}
-
-/**
- * pcie_port_find_device - find the struct device
- * @dev: PCI Express port the service is associated with
- * @service: For the service to find
- *
- * Find the struct device associated with given service on a pci_dev
- */
-struct device *pcie_port_find_device(struct pci_dev *dev,
- u32 service)
-{
- struct device *device;
- struct portdrv_service_data pdrvs;
-
- pdrvs.dev = NULL;
- pdrvs.service = service;
- device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
-
- device = pdrvs.dev;
- return device;
-}
-
/**
* pcie_port_probe_service - probe driver for given PCI Express port service
* @dev: PCI Express port service device to probe against
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index ab5e3a63981b..b019af97f14e 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -42,6 +42,74 @@ __setup("pcie_ports=", pcie_port_setup);
/* global data */
+struct portdrv_service_data {
+ struct pcie_port_service_driver *drv;
+ struct device *dev;
+ u32 service;
+};
+
+static int find_service_iter(struct device *device, void *data)
+{
+ struct pcie_port_service_driver *service_driver;
+ struct portdrv_service_data *pdrvs;
+ u32 service;
+
+ pdrvs = (struct portdrv_service_data *) data;
+ service = pdrvs->service;
+
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ service_driver = to_service_driver(device->driver);
+ if (service_driver->service == service) {
+ pdrvs->drv = service_driver;
+ pdrvs->dev = device;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * pcie_port_find_service - find the service driver
+ * @dev: PCI Express port the service is associated with
+ * @service: Service to find
+ *
+ * Find PCI Express port service driver associated with given service
+ */
+struct pcie_port_service_driver *pcie_port_find_service(struct pci_dev *dev,
+ u32 service)
+{
+ struct pcie_port_service_driver *drv;
+ struct portdrv_service_data pdrvs;
+
+ pdrvs.drv = NULL;
+ pdrvs.service = service;
+ device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
+
+ drv = pdrvs.drv;
+ return drv;
+}
+
+/**
+ * pcie_port_find_device - find the struct device
+ * @dev: PCI Express port the service is associated with
+ * @service: For the service to find
+ *
+ * Find the struct device associated with given service on a pci_dev
+ */
+struct device *pcie_port_find_device(struct pci_dev *dev, u32 service)
+{
+ struct device *device;
+ struct portdrv_service_data pdrvs;
+
+ pdrvs.dev = NULL;
+ pdrvs.service = service;
+ device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
+
+ device = pdrvs.dev;
+ return device;
+}
+
static int pcie_portdrv_restore_config(struct pci_dev *dev)
{
int retval;
From: Bjorn Helgaas <[email protected]>
Rename portdrv_pci.c to portdrv.c. No functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/Makefile | 6
drivers/pci/pcie/portdrv.c | 822 ++++++++++++++++++++++++++++++++++++++++
drivers/pci/pcie/portdrv_pci.c | 822 ----------------------------------------
3 files changed, 824 insertions(+), 826 deletions(-)
create mode 100644 drivers/pci/pcie/portdrv.c
delete mode 100644 drivers/pci/pcie/portdrv_pci.c
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index aad431790b1d..a283f9ac195d 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -2,10 +2,8 @@
#
# Makefile for PCI Express features and port driver
-pcieportdrv-y := portdrv_pci.o err.o
-
-obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
-
+obj-$(CONFIG_PCIEPORTBUS) += portdrv.o
+obj-$(CONFIG_PCIEPORTBUS) += err.o
obj-$(CONFIG_PCIEASPM) += aspm.o
obj-$(CONFIG_PCIEAER) += aer/
obj-$(CONFIG_PCIE_PME) += pme.o
diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c
new file mode 100644
index 000000000000..4fc86d0eef9d
--- /dev/null
+++ b/drivers/pci/pcie/portdrv.c
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Purpose: PCI Express Port Bus Driver
+ * Author: Tom Nguyen <[email protected]>
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen ([email protected])
+ */
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/init.h>
+#include <linux/aer.h>
+#include <linux/dmi.h>
+
+#include "../pci.h"
+#include "portdrv.h"
+
+/* If this switch is set, PCIe port native services should not be enabled. */
+bool pcie_ports_disabled;
+
+/*
+ * If the user specified "pcie_ports=native", use the PCIe services regardless
+ * of whether the platform has given us permission. On ACPI systems, this
+ * means we ignore _OSC.
+ */
+bool pcie_ports_native;
+
+static int __init pcie_port_setup(char *str)
+{
+ if (!strncmp(str, "compat", 6))
+ pcie_ports_disabled = true;
+ else if (!strncmp(str, "native", 6))
+ pcie_ports_native = true;
+
+ return 1;
+}
+__setup("pcie_ports=", pcie_port_setup);
+
+/* global data */
+
+struct portdrv_service_data {
+ struct pcie_port_service_driver *drv;
+ struct device *dev;
+ u32 service;
+};
+
+static int find_service_iter(struct device *device, void *data)
+{
+ struct pcie_port_service_driver *service_driver;
+ struct portdrv_service_data *pdrvs;
+ u32 service;
+
+ pdrvs = (struct portdrv_service_data *) data;
+ service = pdrvs->service;
+
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ service_driver = to_service_driver(device->driver);
+ if (service_driver->service == service) {
+ pdrvs->drv = service_driver;
+ pdrvs->dev = device;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * pcie_port_find_service - find the service driver
+ * @dev: PCI Express port the service is associated with
+ * @service: Service to find
+ *
+ * Find PCI Express port service driver associated with given service
+ */
+struct pcie_port_service_driver *pcie_port_find_service(struct pci_dev *dev,
+ u32 service)
+{
+ struct pcie_port_service_driver *drv;
+ struct portdrv_service_data pdrvs;
+
+ pdrvs.drv = NULL;
+ pdrvs.service = service;
+ device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
+
+ drv = pdrvs.drv;
+ return drv;
+}
+
+/**
+ * pcie_port_find_device - find the struct device
+ * @dev: PCI Express port the service is associated with
+ * @service: For the service to find
+ *
+ * Find the struct device associated with given service on a pci_dev
+ */
+struct device *pcie_port_find_device(struct pci_dev *dev, u32 service)
+{
+ struct device *device;
+ struct portdrv_service_data pdrvs;
+
+ pdrvs.dev = NULL;
+ pdrvs.service = service;
+ device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
+
+ device = pdrvs.dev;
+ return device;
+}
+
+/**
+ * pcie_port_probe_service - probe driver for given PCI Express port service
+ * @dev: PCI Express port service device to probe against
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * whenever match is found between the driver and a port service device.
+ */
+static int pcie_port_probe_service(struct device *dev)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+ int status;
+
+ if (!dev || !dev->driver)
+ return -ENODEV;
+
+ driver = to_service_driver(dev->driver);
+ if (!driver || !driver->probe)
+ return -ENODEV;
+
+ pciedev = to_pcie_device(dev);
+ status = driver->probe(pciedev);
+ if (status)
+ return status;
+
+ get_device(dev);
+ return 0;
+}
+
+/**
+ * pcie_port_remove_service - detach driver from given PCI Express port service
+ * @dev: PCI Express port service device to handle
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * when device_unregister() is called for the port service device associated
+ * with the driver.
+ */
+static int pcie_port_remove_service(struct device *dev)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+
+ if (!dev || !dev->driver)
+ return 0;
+
+ pciedev = to_pcie_device(dev);
+ driver = to_service_driver(dev->driver);
+ if (driver && driver->remove) {
+ driver->remove(pciedev);
+ put_device(dev);
+ }
+ return 0;
+}
+
+/**
+ * pcie_port_shutdown_service - shut down given PCI Express port service
+ * @dev: PCI Express port service device to handle
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * when device_shutdown() is called for the port service device associated
+ * with the driver.
+ */
+static void pcie_port_shutdown_service(struct device *dev) {}
+
+/**
+ * pcie_port_service_register - register PCI Express port service driver
+ * @new: PCI Express port service driver to register
+ */
+int pcie_port_service_register(struct pcie_port_service_driver *new)
+{
+ if (pcie_ports_disabled)
+ return -ENODEV;
+
+ new->driver.name = new->name;
+ new->driver.bus = &pcie_port_bus_type;
+ new->driver.probe = pcie_port_probe_service;
+ new->driver.remove = pcie_port_remove_service;
+ new->driver.shutdown = pcie_port_shutdown_service;
+
+ return driver_register(&new->driver);
+}
+EXPORT_SYMBOL(pcie_port_service_register);
+
+/**
+ * pcie_port_service_unregister - unregister PCI Express port service driver
+ * @drv: PCI Express port service driver to unregister
+ */
+void pcie_port_service_unregister(struct pcie_port_service_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(pcie_port_service_unregister);
+
+static int pcie_portdrv_restore_config(struct pci_dev *dev)
+{
+ int retval;
+
+ retval = pci_enable_device(dev);
+ if (retval)
+ return retval;
+ pci_set_master(dev);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int suspend_iter(struct device *dev, void *data)
+{
+ struct pcie_port_service_driver *service_driver;
+
+ if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
+ service_driver = to_service_driver(dev->driver);
+ if (service_driver->suspend)
+ service_driver->suspend(to_pcie_device(dev));
+ }
+ return 0;
+}
+
+/**
+ * pcie_port_device_suspend - suspend port services associated with a PCIe port
+ * @dev: PCI Express port to handle
+ */
+static int pcie_port_device_suspend(struct device *dev)
+{
+ return device_for_each_child(dev, NULL, suspend_iter);
+}
+
+static int resume_iter(struct device *dev, void *data)
+{
+ struct pcie_port_service_driver *service_driver;
+
+ if ((dev->bus == &pcie_port_bus_type) &&
+ (dev->driver)) {
+ service_driver = to_service_driver(dev->driver);
+ if (service_driver->resume)
+ service_driver->resume(to_pcie_device(dev));
+ }
+ return 0;
+}
+
+/**
+ * pcie_port_device_resume - resume port services associated with a PCIe port
+ * @dev: PCI Express port to handle
+ */
+static int pcie_port_device_resume(struct device *dev)
+{
+ return device_for_each_child(dev, NULL, resume_iter);
+}
+
+static int pcie_port_runtime_suspend(struct device *dev)
+{
+ return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
+static int pcie_port_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+ /*
+ * Assume the PCI core has set bridge_d3 whenever it thinks the port
+ * should be good to go to D3. Everything else, including moving
+ * the port to D3, is handled by the PCI core.
+ */
+ return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
+static const struct dev_pm_ops pcie_portdrv_pm_ops = {
+ .suspend = pcie_port_device_suspend,
+ .resume = pcie_port_device_resume,
+ .freeze = pcie_port_device_suspend,
+ .thaw = pcie_port_device_resume,
+ .poweroff = pcie_port_device_suspend,
+ .restore = pcie_port_device_resume,
+ .runtime_suspend = pcie_port_runtime_suspend,
+ .runtime_resume = pcie_port_runtime_resume,
+ .runtime_idle = pcie_port_runtime_idle,
+};
+
+#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
+
+#else /* !PM */
+
+#define PCIE_PORTDRV_PM_OPS NULL
+#endif /* !PM */
+
+/**
+ * release_pcie_device - free PCI Express port service device structure
+ * @dev: Port service device to release
+ *
+ * Invoked automatically when device is being removed in response to
+ * device_unregister(dev). Release all resources being claimed.
+ */
+static void release_pcie_device(struct device *dev)
+{
+ kfree(to_pcie_device(dev));
+}
+
+/*
+ * Fill in *pme, *aer, *dpc with the relevant Interrupt Message Numbers if
+ * services are enabled in "mask". Return the number of MSI/MSI-X vectors
+ * required to accommodate the largest Message Number.
+ */
+static int pcie_message_numbers(struct pci_dev *dev, int mask,
+ u32 *pme, u32 *aer, u32 *dpc)
+{
+ u32 nvec = 0, pos;
+ u16 reg16;
+
+ /*
+ * The Interrupt Message Number indicates which vector is used, i.e.,
+ * the MSI-X table entry or the MSI offset between the base Message
+ * Data and the generated interrupt message. See PCIe r3.1, sec
+ * 7.8.2, 7.10.10, 7.31.2.
+ */
+
+ if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
+ pcie_capability_read_word(dev, PCI_EXP_FLAGS, ®16);
+ *pme = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9;
+ nvec = *pme + 1;
+ }
+
+#ifdef CONFIG_PCIEAER
+ if (mask & PCIE_PORT_SERVICE_AER) {
+ u32 reg32;
+
+ pos = dev->aer_cap;
+ if (pos) {
+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS,
+ ®32);
+ *aer = (reg32 & PCI_ERR_ROOT_AER_IRQ) >> 27;
+ nvec = max(nvec, *aer + 1);
+ }
+ }
+#endif
+
+ if (mask & PCIE_PORT_SERVICE_DPC) {
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_EXP_DPC_CAP,
+ ®16);
+ *dpc = reg16 & PCI_EXP_DPC_IRQ;
+ nvec = max(nvec, *dpc + 1);
+ }
+ }
+
+ return nvec;
+}
+
+/*
+ * The PCIe Capability Interrupt Message Number (PCIe r3.1, sec 7.8.2) must
+ * be one of the first 32 MSI-X entries. Per PCI r3.0, sec 6.8.3.1, MSI
+ * supports a maximum of 32 vectors per function.
+ */
+#define PCIE_PORT_MAX_MSI_ENTRIES 32
+
+/**
+ * pcie_port_enable_irq_vec - try to set up MSI-X or MSI as interrupt mode
+ * for given port
+ * @dev: PCI Express port to handle
+ * @irqs: Array of interrupt vectors to populate
+ * @mask: Bitmask of port capabilities returned by get_port_device_capability()
+ *
+ * Return value: 0 on success, error code on failure
+ */
+static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask)
+{
+ int nr_entries, nvec;
+ u32 pme = 0, aer = 0, dpc = 0;
+
+ /* Allocate the maximum possible number of MSI/MSI-X vectors */
+ nr_entries = pci_alloc_irq_vectors(dev, 1, PCIE_PORT_MAX_MSI_ENTRIES,
+ PCI_IRQ_MSIX | PCI_IRQ_MSI);
+ if (nr_entries < 0)
+ return nr_entries;
+
+ /* See how many and which Interrupt Message Numbers we actually use */
+ nvec = pcie_message_numbers(dev, mask, &pme, &aer, &dpc);
+ if (nvec > nr_entries) {
+ pci_free_irq_vectors(dev);
+ return -EIO;
+ }
+
+ /*
+ * If we allocated more than we need, free them and reallocate fewer.
+ *
+ * Reallocating may change the specific vectors we get, so
+ * pci_irq_vector() must be done *after* the reallocation.
+ *
+ * If we're using MSI, hardware is *allowed* to change the Interrupt
+ * Message Numbers when we free and reallocate the vectors, but we
+ * assume it won't because we allocate enough vectors for the
+ * biggest Message Number we found.
+ */
+ if (nvec != nr_entries) {
+ pci_free_irq_vectors(dev);
+
+ nr_entries = pci_alloc_irq_vectors(dev, nvec, nvec,
+ PCI_IRQ_MSIX | PCI_IRQ_MSI);
+ if (nr_entries < 0)
+ return nr_entries;
+ }
+
+ /* PME and hotplug share an MSI/MSI-X vector */
+ if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
+ irqs[PCIE_PORT_SERVICE_PME_SHIFT] = pci_irq_vector(dev, pme);
+ irqs[PCIE_PORT_SERVICE_HP_SHIFT] = pci_irq_vector(dev, pme);
+ }
+
+ if (mask & PCIE_PORT_SERVICE_AER)
+ irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pci_irq_vector(dev, aer);
+
+ if (mask & PCIE_PORT_SERVICE_DPC)
+ irqs[PCIE_PORT_SERVICE_DPC_SHIFT] = pci_irq_vector(dev, dpc);
+
+ return 0;
+}
+
+/**
+ * pcie_init_service_irqs - initialize irqs for PCI Express port services
+ * @dev: PCI Express port to handle
+ * @irqs: Array of irqs to populate
+ * @mask: Bitmask of port capabilities returned by get_port_device_capability()
+ *
+ * Return value: Interrupt mode associated with the port
+ */
+static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
+{
+ int ret, i;
+
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+ irqs[i] = -1;
+
+ /*
+ * If we support PME but can't use MSI/MSI-X for it, we have to
+ * fall back to INTx or other interrupts, e.g., a system shared
+ * interrupt.
+ */
+ if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi())
+ goto legacy_irq;
+
+ /* Try to use MSI-X or MSI if supported */
+ if (pcie_port_enable_irq_vec(dev, irqs, mask) == 0)
+ return 0;
+
+legacy_irq:
+ /* fall back to legacy IRQ */
+ ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
+ if (ret < 0)
+ return -ENODEV;
+
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+ irqs[i] = pci_irq_vector(dev, 0);
+
+ return 0;
+}
+
+/**
+ * get_port_device_capability - discover capabilities of a PCI Express port
+ * @dev: PCI Express port to examine
+ *
+ * The capabilities are read from the port's PCI Express configuration registers
+ * as described in PCI Express Base Specification 1.0a sections 7.8.2, 7.8.9 and
+ * 7.9 - 7.11.
+ *
+ * Return value: Bitmask of discovered port capabilities
+ */
+static int get_port_device_capability(struct pci_dev *dev)
+{
+ struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+ int services = 0;
+
+ if (dev->is_hotplug_bridge &&
+ (pcie_ports_native || host->native_pcie_hotplug)) {
+ services |= PCIE_PORT_SERVICE_HP;
+
+ /*
+ * Disable hot-plug interrupts in case they have been enabled
+ * by the BIOS and the hot-plug service driver is not loaded.
+ */
+ pcie_capability_clear_word(dev, PCI_EXP_SLTCTL,
+ PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
+ }
+
+#ifdef CONFIG_PCIEAER
+ if (dev->aer_cap && pci_aer_available() &&
+ (pcie_ports_native || host->native_aer)) {
+ services |= PCIE_PORT_SERVICE_AER;
+
+ /*
+ * Disable AER on this port in case it's been enabled by the
+ * BIOS (the AER service driver will enable it when necessary).
+ */
+ pci_disable_pcie_error_reporting(dev);
+ }
+#endif
+
+ /*
+ * Root ports are capable of generating PME too. Root Complex
+ * Event Collectors can also generate PMEs, but we don't handle
+ * those yet.
+ */
+ if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT &&
+ (pcie_ports_native || host->native_pme)) {
+ services |= PCIE_PORT_SERVICE_PME;
+
+ /*
+ * Disable PME interrupt on this port in case it's been enabled
+ * by the BIOS (the PME service driver will enable it when
+ * necessary).
+ */
+ pcie_pme_interrupt_enable(dev, false);
+ }
+
+ if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
+ pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
+ services |= PCIE_PORT_SERVICE_DPC;
+
+ return services;
+}
+
+#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
+
+/**
+ * pcie_device_init - allocate and initialize PCI Express port service device
+ * @pdev: PCI Express port to associate the service device with
+ * @service: Type of service to associate with the service device
+ * @irq: Interrupt vector to associate with the service device
+ */
+static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
+{
+ int retval;
+ struct pcie_device *pcie;
+ struct device *device;
+
+ pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+ pcie->port = pdev;
+ pcie->irq = irq;
+ pcie->service = service;
+
+ /* Initialize generic device interface */
+ device = &pcie->device;
+ device->bus = &pcie_port_bus_type;
+ device->release = release_pcie_device; /* callback to free pcie dev */
+ dev_set_name(device, "%s:pcie%03x",
+ pci_name(pdev),
+ get_descriptor_id(pci_pcie_type(pdev), service));
+ device->parent = &pdev->dev;
+ device_enable_async_suspend(device);
+
+ retval = device_register(device);
+ if (retval) {
+ put_device(device);
+ return retval;
+ }
+
+ pm_runtime_no_callbacks(device);
+
+ return 0;
+}
+
+/**
+ * pcie_port_device_register - register PCI Express port
+ * @dev: PCI Express port to register
+ *
+ * Allocate the port extension structure and register services associated with
+ * the port.
+ */
+int pcie_port_device_register(struct pci_dev *dev)
+{
+ int status, capabilities, i, nr_service;
+ int irqs[PCIE_PORT_DEVICE_MAXSERVICES];
+
+ /* Enable PCI Express port device */
+ status = pci_enable_device(dev);
+ if (status)
+ return status;
+
+ /* Get and check PCI Express port services */
+ capabilities = get_port_device_capability(dev);
+ if (!capabilities)
+ return 0;
+
+ pci_set_master(dev);
+ /*
+ * Initialize service irqs. Don't use service devices that
+ * require interrupts if there is no way to generate them.
+ * However, some drivers may have a polling mode (e.g. pciehp_poll_mode)
+ * that can be used in the absence of irqs. Allow them to determine
+ * if that is to be used.
+ */
+ status = pcie_init_service_irqs(dev, irqs, capabilities);
+ if (status) {
+ capabilities &= PCIE_PORT_SERVICE_HP;
+ if (!capabilities)
+ goto error_disable;
+ }
+
+ /* Allocate child services if any */
+ status = -ENODEV;
+ nr_service = 0;
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
+ int service = 1 << i;
+ if (!(capabilities & service))
+ continue;
+ if (!pcie_device_init(dev, service, irqs[i]))
+ nr_service++;
+ }
+ if (!nr_service)
+ goto error_cleanup_irqs;
+
+ return 0;
+
+error_cleanup_irqs:
+ pci_free_irq_vectors(dev);
+error_disable:
+ pci_disable_device(dev);
+ return status;
+}
+
+/*
+ * pcie_portdrv_probe - Probe PCI-Express port devices
+ * @dev: PCI-Express port device being probed
+ *
+ * If detected invokes the pcie_port_device_register() method for
+ * this port device.
+ */
+static int pcie_portdrv_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int status;
+
+ if (!pci_is_pcie(dev) ||
+ ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
+ return -ENODEV;
+
+ status = pcie_port_device_register(dev);
+ if (status)
+ return status;
+
+ pci_save_state(dev);
+
+ dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_SMART_SUSPEND |
+ DPM_FLAG_LEAVE_SUSPENDED);
+
+ if (pci_bridge_d3_possible(dev)) {
+ /*
+ * Keep the port resumed 100ms to make sure things like
+ * config space accesses from userspace (lspci) will not
+ * cause the port to repeatedly suspend and resume.
+ */
+ pm_runtime_set_autosuspend_delay(&dev->dev, 100);
+ pm_runtime_use_autosuspend(&dev->dev);
+ pm_runtime_mark_last_busy(&dev->dev);
+ pm_runtime_put_autosuspend(&dev->dev);
+ pm_runtime_allow(&dev->dev);
+ }
+
+ return 0;
+}
+
+static int remove_iter(struct device *dev, void *data)
+{
+ if (dev->bus == &pcie_port_bus_type)
+ device_unregister(dev);
+ return 0;
+}
+
+/**
+ * pcie_port_device_remove - unregister PCI Express port service devices
+ * @dev: PCI Express port the service devices to unregister are associated with
+ *
+ * Remove PCI Express port service devices associated with given port and
+ * disable MSI-X or MSI for the port.
+ */
+static void pcie_port_device_remove(struct pci_dev *dev)
+{
+ device_for_each_child(&dev->dev, NULL, remove_iter);
+ pci_free_irq_vectors(dev);
+ pci_disable_device(dev);
+}
+
+static void pcie_portdrv_remove(struct pci_dev *dev)
+{
+ if (pci_bridge_d3_possible(dev)) {
+ pm_runtime_forbid(&dev->dev);
+ pm_runtime_get_noresume(&dev->dev);
+ pm_runtime_dont_use_autosuspend(&dev->dev);
+ }
+
+ pcie_port_device_remove(dev);
+}
+
+static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
+ enum pci_channel_state error)
+{
+ /* Root Port has no impact. Always recovers. */
+ return PCI_ERS_RESULT_CAN_RECOVER;
+}
+
+static pci_ers_result_t pcie_portdrv_mmio_enabled(struct pci_dev *dev)
+{
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
+{
+ /* If fatal, restore cfg space for possible link reset at upstream */
+ if (dev->error_state == pci_channel_io_frozen) {
+ dev->state_saved = true;
+ pci_restore_state(dev);
+ pcie_portdrv_restore_config(dev);
+ pci_enable_pcie_error_reporting(dev);
+ }
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static int err_resume_iter(struct device *device, void *data)
+{
+ struct pcie_device *pcie_device;
+ struct pcie_port_service_driver *driver;
+
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ driver = to_service_driver(device->driver);
+ if (driver && driver->error_resume) {
+ pcie_device = to_pcie_device(device);
+
+ /* Forward error message to service drivers */
+ driver->error_resume(pcie_device->port);
+ }
+ }
+
+ return 0;
+}
+
+static void pcie_portdrv_err_resume(struct pci_dev *dev)
+{
+ device_for_each_child(&dev->dev, NULL, err_resume_iter);
+}
+
+static const struct pci_device_id port_pci_ids[] = { {
+ /* handle any PCI-Express port */
+ PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0),
+ },
+ { }
+};
+
+static const struct pci_error_handlers pcie_portdrv_err_handler = {
+ .error_detected = pcie_portdrv_error_detected,
+ .mmio_enabled = pcie_portdrv_mmio_enabled,
+ .slot_reset = pcie_portdrv_slot_reset,
+ .resume = pcie_portdrv_err_resume,
+};
+
+static struct pci_driver pcie_portdriver = {
+ .name = "pcieport",
+ .id_table = port_pci_ids,
+
+ .probe = pcie_portdrv_probe,
+ .remove = pcie_portdrv_remove,
+ .shutdown = pcie_portdrv_remove,
+
+ .err_handler = &pcie_portdrv_err_handler,
+
+ .driver.pm = PCIE_PORTDRV_PM_OPS,
+};
+
+static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
+{
+ pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
+ d->ident);
+ pcie_pme_disable_msi();
+ return 0;
+}
+
+static const struct dmi_system_id pcie_portdrv_dmi_table[] __initconst = {
+ /*
+ * Boxes that should not use MSI for PCIe PME signaling.
+ */
+ {
+ .callback = dmi_pcie_pme_disable_msi,
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "MICRO-STAR INTERNATIONAL CO., LTD"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
+ },
+ },
+ { }
+};
+
+static int __init pcie_portdrv_init(void)
+{
+ if (pcie_ports_disabled)
+ return -EACCES;
+
+ dmi_check_system(pcie_portdrv_dmi_table);
+
+ return pci_register_driver(&pcie_portdriver);
+}
+device_initcall(pcie_portdrv_init);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
deleted file mode 100644
index 4fc86d0eef9d..000000000000
--- a/drivers/pci/pcie/portdrv_pci.c
+++ /dev/null
@@ -1,822 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Purpose: PCI Express Port Bus Driver
- * Author: Tom Nguyen <[email protected]>
- *
- * Copyright (C) 2004 Intel
- * Copyright (C) Tom Long Nguyen ([email protected])
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/pm.h>
-#include <linux/pm_runtime.h>
-#include <linux/init.h>
-#include <linux/aer.h>
-#include <linux/dmi.h>
-
-#include "../pci.h"
-#include "portdrv.h"
-
-/* If this switch is set, PCIe port native services should not be enabled. */
-bool pcie_ports_disabled;
-
-/*
- * If the user specified "pcie_ports=native", use the PCIe services regardless
- * of whether the platform has given us permission. On ACPI systems, this
- * means we ignore _OSC.
- */
-bool pcie_ports_native;
-
-static int __init pcie_port_setup(char *str)
-{
- if (!strncmp(str, "compat", 6))
- pcie_ports_disabled = true;
- else if (!strncmp(str, "native", 6))
- pcie_ports_native = true;
-
- return 1;
-}
-__setup("pcie_ports=", pcie_port_setup);
-
-/* global data */
-
-struct portdrv_service_data {
- struct pcie_port_service_driver *drv;
- struct device *dev;
- u32 service;
-};
-
-static int find_service_iter(struct device *device, void *data)
-{
- struct pcie_port_service_driver *service_driver;
- struct portdrv_service_data *pdrvs;
- u32 service;
-
- pdrvs = (struct portdrv_service_data *) data;
- service = pdrvs->service;
-
- if (device->bus == &pcie_port_bus_type && device->driver) {
- service_driver = to_service_driver(device->driver);
- if (service_driver->service == service) {
- pdrvs->drv = service_driver;
- pdrvs->dev = device;
- return 1;
- }
- }
-
- return 0;
-}
-
-/**
- * pcie_port_find_service - find the service driver
- * @dev: PCI Express port the service is associated with
- * @service: Service to find
- *
- * Find PCI Express port service driver associated with given service
- */
-struct pcie_port_service_driver *pcie_port_find_service(struct pci_dev *dev,
- u32 service)
-{
- struct pcie_port_service_driver *drv;
- struct portdrv_service_data pdrvs;
-
- pdrvs.drv = NULL;
- pdrvs.service = service;
- device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
-
- drv = pdrvs.drv;
- return drv;
-}
-
-/**
- * pcie_port_find_device - find the struct device
- * @dev: PCI Express port the service is associated with
- * @service: For the service to find
- *
- * Find the struct device associated with given service on a pci_dev
- */
-struct device *pcie_port_find_device(struct pci_dev *dev, u32 service)
-{
- struct device *device;
- struct portdrv_service_data pdrvs;
-
- pdrvs.dev = NULL;
- pdrvs.service = service;
- device_for_each_child(&dev->dev, &pdrvs, find_service_iter);
-
- device = pdrvs.dev;
- return device;
-}
-
-/**
- * pcie_port_probe_service - probe driver for given PCI Express port service
- * @dev: PCI Express port service device to probe against
- *
- * If PCI Express port service driver is registered with
- * pcie_port_service_register(), this function will be called by the driver core
- * whenever match is found between the driver and a port service device.
- */
-static int pcie_port_probe_service(struct device *dev)
-{
- struct pcie_device *pciedev;
- struct pcie_port_service_driver *driver;
- int status;
-
- if (!dev || !dev->driver)
- return -ENODEV;
-
- driver = to_service_driver(dev->driver);
- if (!driver || !driver->probe)
- return -ENODEV;
-
- pciedev = to_pcie_device(dev);
- status = driver->probe(pciedev);
- if (status)
- return status;
-
- get_device(dev);
- return 0;
-}
-
-/**
- * pcie_port_remove_service - detach driver from given PCI Express port service
- * @dev: PCI Express port service device to handle
- *
- * If PCI Express port service driver is registered with
- * pcie_port_service_register(), this function will be called by the driver core
- * when device_unregister() is called for the port service device associated
- * with the driver.
- */
-static int pcie_port_remove_service(struct device *dev)
-{
- struct pcie_device *pciedev;
- struct pcie_port_service_driver *driver;
-
- if (!dev || !dev->driver)
- return 0;
-
- pciedev = to_pcie_device(dev);
- driver = to_service_driver(dev->driver);
- if (driver && driver->remove) {
- driver->remove(pciedev);
- put_device(dev);
- }
- return 0;
-}
-
-/**
- * pcie_port_shutdown_service - shut down given PCI Express port service
- * @dev: PCI Express port service device to handle
- *
- * If PCI Express port service driver is registered with
- * pcie_port_service_register(), this function will be called by the driver core
- * when device_shutdown() is called for the port service device associated
- * with the driver.
- */
-static void pcie_port_shutdown_service(struct device *dev) {}
-
-/**
- * pcie_port_service_register - register PCI Express port service driver
- * @new: PCI Express port service driver to register
- */
-int pcie_port_service_register(struct pcie_port_service_driver *new)
-{
- if (pcie_ports_disabled)
- return -ENODEV;
-
- new->driver.name = new->name;
- new->driver.bus = &pcie_port_bus_type;
- new->driver.probe = pcie_port_probe_service;
- new->driver.remove = pcie_port_remove_service;
- new->driver.shutdown = pcie_port_shutdown_service;
-
- return driver_register(&new->driver);
-}
-EXPORT_SYMBOL(pcie_port_service_register);
-
-/**
- * pcie_port_service_unregister - unregister PCI Express port service driver
- * @drv: PCI Express port service driver to unregister
- */
-void pcie_port_service_unregister(struct pcie_port_service_driver *drv)
-{
- driver_unregister(&drv->driver);
-}
-EXPORT_SYMBOL(pcie_port_service_unregister);
-
-static int pcie_portdrv_restore_config(struct pci_dev *dev)
-{
- int retval;
-
- retval = pci_enable_device(dev);
- if (retval)
- return retval;
- pci_set_master(dev);
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int suspend_iter(struct device *dev, void *data)
-{
- struct pcie_port_service_driver *service_driver;
-
- if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
- service_driver = to_service_driver(dev->driver);
- if (service_driver->suspend)
- service_driver->suspend(to_pcie_device(dev));
- }
- return 0;
-}
-
-/**
- * pcie_port_device_suspend - suspend port services associated with a PCIe port
- * @dev: PCI Express port to handle
- */
-static int pcie_port_device_suspend(struct device *dev)
-{
- return device_for_each_child(dev, NULL, suspend_iter);
-}
-
-static int resume_iter(struct device *dev, void *data)
-{
- struct pcie_port_service_driver *service_driver;
-
- if ((dev->bus == &pcie_port_bus_type) &&
- (dev->driver)) {
- service_driver = to_service_driver(dev->driver);
- if (service_driver->resume)
- service_driver->resume(to_pcie_device(dev));
- }
- return 0;
-}
-
-/**
- * pcie_port_device_resume - resume port services associated with a PCIe port
- * @dev: PCI Express port to handle
- */
-static int pcie_port_device_resume(struct device *dev)
-{
- return device_for_each_child(dev, NULL, resume_iter);
-}
-
-static int pcie_port_runtime_suspend(struct device *dev)
-{
- return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
-}
-
-static int pcie_port_runtime_resume(struct device *dev)
-{
- return 0;
-}
-
-static int pcie_port_runtime_idle(struct device *dev)
-{
- /*
- * Assume the PCI core has set bridge_d3 whenever it thinks the port
- * should be good to go to D3. Everything else, including moving
- * the port to D3, is handled by the PCI core.
- */
- return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
-}
-
-static const struct dev_pm_ops pcie_portdrv_pm_ops = {
- .suspend = pcie_port_device_suspend,
- .resume = pcie_port_device_resume,
- .freeze = pcie_port_device_suspend,
- .thaw = pcie_port_device_resume,
- .poweroff = pcie_port_device_suspend,
- .restore = pcie_port_device_resume,
- .runtime_suspend = pcie_port_runtime_suspend,
- .runtime_resume = pcie_port_runtime_resume,
- .runtime_idle = pcie_port_runtime_idle,
-};
-
-#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
-
-#else /* !PM */
-
-#define PCIE_PORTDRV_PM_OPS NULL
-#endif /* !PM */
-
-/**
- * release_pcie_device - free PCI Express port service device structure
- * @dev: Port service device to release
- *
- * Invoked automatically when device is being removed in response to
- * device_unregister(dev). Release all resources being claimed.
- */
-static void release_pcie_device(struct device *dev)
-{
- kfree(to_pcie_device(dev));
-}
-
-/*
- * Fill in *pme, *aer, *dpc with the relevant Interrupt Message Numbers if
- * services are enabled in "mask". Return the number of MSI/MSI-X vectors
- * required to accommodate the largest Message Number.
- */
-static int pcie_message_numbers(struct pci_dev *dev, int mask,
- u32 *pme, u32 *aer, u32 *dpc)
-{
- u32 nvec = 0, pos;
- u16 reg16;
-
- /*
- * The Interrupt Message Number indicates which vector is used, i.e.,
- * the MSI-X table entry or the MSI offset between the base Message
- * Data and the generated interrupt message. See PCIe r3.1, sec
- * 7.8.2, 7.10.10, 7.31.2.
- */
-
- if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
- pcie_capability_read_word(dev, PCI_EXP_FLAGS, ®16);
- *pme = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9;
- nvec = *pme + 1;
- }
-
-#ifdef CONFIG_PCIEAER
- if (mask & PCIE_PORT_SERVICE_AER) {
- u32 reg32;
-
- pos = dev->aer_cap;
- if (pos) {
- pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS,
- ®32);
- *aer = (reg32 & PCI_ERR_ROOT_AER_IRQ) >> 27;
- nvec = max(nvec, *aer + 1);
- }
- }
-#endif
-
- if (mask & PCIE_PORT_SERVICE_DPC) {
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC);
- if (pos) {
- pci_read_config_word(dev, pos + PCI_EXP_DPC_CAP,
- ®16);
- *dpc = reg16 & PCI_EXP_DPC_IRQ;
- nvec = max(nvec, *dpc + 1);
- }
- }
-
- return nvec;
-}
-
-/*
- * The PCIe Capability Interrupt Message Number (PCIe r3.1, sec 7.8.2) must
- * be one of the first 32 MSI-X entries. Per PCI r3.0, sec 6.8.3.1, MSI
- * supports a maximum of 32 vectors per function.
- */
-#define PCIE_PORT_MAX_MSI_ENTRIES 32
-
-/**
- * pcie_port_enable_irq_vec - try to set up MSI-X or MSI as interrupt mode
- * for given port
- * @dev: PCI Express port to handle
- * @irqs: Array of interrupt vectors to populate
- * @mask: Bitmask of port capabilities returned by get_port_device_capability()
- *
- * Return value: 0 on success, error code on failure
- */
-static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask)
-{
- int nr_entries, nvec;
- u32 pme = 0, aer = 0, dpc = 0;
-
- /* Allocate the maximum possible number of MSI/MSI-X vectors */
- nr_entries = pci_alloc_irq_vectors(dev, 1, PCIE_PORT_MAX_MSI_ENTRIES,
- PCI_IRQ_MSIX | PCI_IRQ_MSI);
- if (nr_entries < 0)
- return nr_entries;
-
- /* See how many and which Interrupt Message Numbers we actually use */
- nvec = pcie_message_numbers(dev, mask, &pme, &aer, &dpc);
- if (nvec > nr_entries) {
- pci_free_irq_vectors(dev);
- return -EIO;
- }
-
- /*
- * If we allocated more than we need, free them and reallocate fewer.
- *
- * Reallocating may change the specific vectors we get, so
- * pci_irq_vector() must be done *after* the reallocation.
- *
- * If we're using MSI, hardware is *allowed* to change the Interrupt
- * Message Numbers when we free and reallocate the vectors, but we
- * assume it won't because we allocate enough vectors for the
- * biggest Message Number we found.
- */
- if (nvec != nr_entries) {
- pci_free_irq_vectors(dev);
-
- nr_entries = pci_alloc_irq_vectors(dev, nvec, nvec,
- PCI_IRQ_MSIX | PCI_IRQ_MSI);
- if (nr_entries < 0)
- return nr_entries;
- }
-
- /* PME and hotplug share an MSI/MSI-X vector */
- if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
- irqs[PCIE_PORT_SERVICE_PME_SHIFT] = pci_irq_vector(dev, pme);
- irqs[PCIE_PORT_SERVICE_HP_SHIFT] = pci_irq_vector(dev, pme);
- }
-
- if (mask & PCIE_PORT_SERVICE_AER)
- irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pci_irq_vector(dev, aer);
-
- if (mask & PCIE_PORT_SERVICE_DPC)
- irqs[PCIE_PORT_SERVICE_DPC_SHIFT] = pci_irq_vector(dev, dpc);
-
- return 0;
-}
-
-/**
- * pcie_init_service_irqs - initialize irqs for PCI Express port services
- * @dev: PCI Express port to handle
- * @irqs: Array of irqs to populate
- * @mask: Bitmask of port capabilities returned by get_port_device_capability()
- *
- * Return value: Interrupt mode associated with the port
- */
-static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
-{
- int ret, i;
-
- for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
- irqs[i] = -1;
-
- /*
- * If we support PME but can't use MSI/MSI-X for it, we have to
- * fall back to INTx or other interrupts, e.g., a system shared
- * interrupt.
- */
- if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi())
- goto legacy_irq;
-
- /* Try to use MSI-X or MSI if supported */
- if (pcie_port_enable_irq_vec(dev, irqs, mask) == 0)
- return 0;
-
-legacy_irq:
- /* fall back to legacy IRQ */
- ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
- if (ret < 0)
- return -ENODEV;
-
- for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
- irqs[i] = pci_irq_vector(dev, 0);
-
- return 0;
-}
-
-/**
- * get_port_device_capability - discover capabilities of a PCI Express port
- * @dev: PCI Express port to examine
- *
- * The capabilities are read from the port's PCI Express configuration registers
- * as described in PCI Express Base Specification 1.0a sections 7.8.2, 7.8.9 and
- * 7.9 - 7.11.
- *
- * Return value: Bitmask of discovered port capabilities
- */
-static int get_port_device_capability(struct pci_dev *dev)
-{
- struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
- int services = 0;
-
- if (dev->is_hotplug_bridge &&
- (pcie_ports_native || host->native_pcie_hotplug)) {
- services |= PCIE_PORT_SERVICE_HP;
-
- /*
- * Disable hot-plug interrupts in case they have been enabled
- * by the BIOS and the hot-plug service driver is not loaded.
- */
- pcie_capability_clear_word(dev, PCI_EXP_SLTCTL,
- PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
- }
-
-#ifdef CONFIG_PCIEAER
- if (dev->aer_cap && pci_aer_available() &&
- (pcie_ports_native || host->native_aer)) {
- services |= PCIE_PORT_SERVICE_AER;
-
- /*
- * Disable AER on this port in case it's been enabled by the
- * BIOS (the AER service driver will enable it when necessary).
- */
- pci_disable_pcie_error_reporting(dev);
- }
-#endif
-
- /*
- * Root ports are capable of generating PME too. Root Complex
- * Event Collectors can also generate PMEs, but we don't handle
- * those yet.
- */
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT &&
- (pcie_ports_native || host->native_pme)) {
- services |= PCIE_PORT_SERVICE_PME;
-
- /*
- * Disable PME interrupt on this port in case it's been enabled
- * by the BIOS (the PME service driver will enable it when
- * necessary).
- */
- pcie_pme_interrupt_enable(dev, false);
- }
-
- if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
- pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
- services |= PCIE_PORT_SERVICE_DPC;
-
- return services;
-}
-
-#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
-
-/**
- * pcie_device_init - allocate and initialize PCI Express port service device
- * @pdev: PCI Express port to associate the service device with
- * @service: Type of service to associate with the service device
- * @irq: Interrupt vector to associate with the service device
- */
-static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
-{
- int retval;
- struct pcie_device *pcie;
- struct device *device;
-
- pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
- if (!pcie)
- return -ENOMEM;
- pcie->port = pdev;
- pcie->irq = irq;
- pcie->service = service;
-
- /* Initialize generic device interface */
- device = &pcie->device;
- device->bus = &pcie_port_bus_type;
- device->release = release_pcie_device; /* callback to free pcie dev */
- dev_set_name(device, "%s:pcie%03x",
- pci_name(pdev),
- get_descriptor_id(pci_pcie_type(pdev), service));
- device->parent = &pdev->dev;
- device_enable_async_suspend(device);
-
- retval = device_register(device);
- if (retval) {
- put_device(device);
- return retval;
- }
-
- pm_runtime_no_callbacks(device);
-
- return 0;
-}
-
-/**
- * pcie_port_device_register - register PCI Express port
- * @dev: PCI Express port to register
- *
- * Allocate the port extension structure and register services associated with
- * the port.
- */
-int pcie_port_device_register(struct pci_dev *dev)
-{
- int status, capabilities, i, nr_service;
- int irqs[PCIE_PORT_DEVICE_MAXSERVICES];
-
- /* Enable PCI Express port device */
- status = pci_enable_device(dev);
- if (status)
- return status;
-
- /* Get and check PCI Express port services */
- capabilities = get_port_device_capability(dev);
- if (!capabilities)
- return 0;
-
- pci_set_master(dev);
- /*
- * Initialize service irqs. Don't use service devices that
- * require interrupts if there is no way to generate them.
- * However, some drivers may have a polling mode (e.g. pciehp_poll_mode)
- * that can be used in the absence of irqs. Allow them to determine
- * if that is to be used.
- */
- status = pcie_init_service_irqs(dev, irqs, capabilities);
- if (status) {
- capabilities &= PCIE_PORT_SERVICE_HP;
- if (!capabilities)
- goto error_disable;
- }
-
- /* Allocate child services if any */
- status = -ENODEV;
- nr_service = 0;
- for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
- int service = 1 << i;
- if (!(capabilities & service))
- continue;
- if (!pcie_device_init(dev, service, irqs[i]))
- nr_service++;
- }
- if (!nr_service)
- goto error_cleanup_irqs;
-
- return 0;
-
-error_cleanup_irqs:
- pci_free_irq_vectors(dev);
-error_disable:
- pci_disable_device(dev);
- return status;
-}
-
-/*
- * pcie_portdrv_probe - Probe PCI-Express port devices
- * @dev: PCI-Express port device being probed
- *
- * If detected invokes the pcie_port_device_register() method for
- * this port device.
- */
-static int pcie_portdrv_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- int status;
-
- if (!pci_is_pcie(dev) ||
- ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
- (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) &&
- (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
- return -ENODEV;
-
- status = pcie_port_device_register(dev);
- if (status)
- return status;
-
- pci_save_state(dev);
-
- dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_SMART_SUSPEND |
- DPM_FLAG_LEAVE_SUSPENDED);
-
- if (pci_bridge_d3_possible(dev)) {
- /*
- * Keep the port resumed 100ms to make sure things like
- * config space accesses from userspace (lspci) will not
- * cause the port to repeatedly suspend and resume.
- */
- pm_runtime_set_autosuspend_delay(&dev->dev, 100);
- pm_runtime_use_autosuspend(&dev->dev);
- pm_runtime_mark_last_busy(&dev->dev);
- pm_runtime_put_autosuspend(&dev->dev);
- pm_runtime_allow(&dev->dev);
- }
-
- return 0;
-}
-
-static int remove_iter(struct device *dev, void *data)
-{
- if (dev->bus == &pcie_port_bus_type)
- device_unregister(dev);
- return 0;
-}
-
-/**
- * pcie_port_device_remove - unregister PCI Express port service devices
- * @dev: PCI Express port the service devices to unregister are associated with
- *
- * Remove PCI Express port service devices associated with given port and
- * disable MSI-X or MSI for the port.
- */
-static void pcie_port_device_remove(struct pci_dev *dev)
-{
- device_for_each_child(&dev->dev, NULL, remove_iter);
- pci_free_irq_vectors(dev);
- pci_disable_device(dev);
-}
-
-static void pcie_portdrv_remove(struct pci_dev *dev)
-{
- if (pci_bridge_d3_possible(dev)) {
- pm_runtime_forbid(&dev->dev);
- pm_runtime_get_noresume(&dev->dev);
- pm_runtime_dont_use_autosuspend(&dev->dev);
- }
-
- pcie_port_device_remove(dev);
-}
-
-static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
- enum pci_channel_state error)
-{
- /* Root Port has no impact. Always recovers. */
- return PCI_ERS_RESULT_CAN_RECOVER;
-}
-
-static pci_ers_result_t pcie_portdrv_mmio_enabled(struct pci_dev *dev)
-{
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
-{
- /* If fatal, restore cfg space for possible link reset at upstream */
- if (dev->error_state == pci_channel_io_frozen) {
- dev->state_saved = true;
- pci_restore_state(dev);
- pcie_portdrv_restore_config(dev);
- pci_enable_pcie_error_reporting(dev);
- }
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-static int err_resume_iter(struct device *device, void *data)
-{
- struct pcie_device *pcie_device;
- struct pcie_port_service_driver *driver;
-
- if (device->bus == &pcie_port_bus_type && device->driver) {
- driver = to_service_driver(device->driver);
- if (driver && driver->error_resume) {
- pcie_device = to_pcie_device(device);
-
- /* Forward error message to service drivers */
- driver->error_resume(pcie_device->port);
- }
- }
-
- return 0;
-}
-
-static void pcie_portdrv_err_resume(struct pci_dev *dev)
-{
- device_for_each_child(&dev->dev, NULL, err_resume_iter);
-}
-
-static const struct pci_device_id port_pci_ids[] = { {
- /* handle any PCI-Express port */
- PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0),
- },
- { }
-};
-
-static const struct pci_error_handlers pcie_portdrv_err_handler = {
- .error_detected = pcie_portdrv_error_detected,
- .mmio_enabled = pcie_portdrv_mmio_enabled,
- .slot_reset = pcie_portdrv_slot_reset,
- .resume = pcie_portdrv_err_resume,
-};
-
-static struct pci_driver pcie_portdriver = {
- .name = "pcieport",
- .id_table = port_pci_ids,
-
- .probe = pcie_portdrv_probe,
- .remove = pcie_portdrv_remove,
- .shutdown = pcie_portdrv_remove,
-
- .err_handler = &pcie_portdrv_err_handler,
-
- .driver.pm = PCIE_PORTDRV_PM_OPS,
-};
-
-static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
-{
- pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
- d->ident);
- pcie_pme_disable_msi();
- return 0;
-}
-
-static const struct dmi_system_id pcie_portdrv_dmi_table[] __initconst = {
- /*
- * Boxes that should not use MSI for PCIe PME signaling.
- */
- {
- .callback = dmi_pcie_pme_disable_msi,
- .ident = "MSI Wind U-100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "MICRO-STAR INTERNATIONAL CO., LTD"),
- DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
- },
- },
- { }
-};
-
-static int __init pcie_portdrv_init(void)
-{
- if (pcie_ports_disabled)
- return -EACCES;
-
- dmi_check_system(pcie_portdrv_dmi_table);
-
- return pci_register_driver(&pcie_portdriver);
-}
-device_initcall(pcie_portdrv_init);
From: Bjorn Helgaas <[email protected]>
Move device removal code next to its caller in portdrv_pci.c. No
functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/portdrv.h | 1 -
drivers/pci/pcie/portdrv_core.c | 21 ---------------------
drivers/pci/pcie/portdrv_pci.c | 21 +++++++++++++++++++++
3 files changed, 21 insertions(+), 22 deletions(-)
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index cb2a33ea68a5..ab3631a61347 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -79,7 +79,6 @@ void pcie_port_service_unregister(struct pcie_port_service_driver *new);
#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
extern struct bus_type pcie_port_bus_type;
-void pcie_port_device_remove(struct pci_dev *dev);
int __must_check pcie_port_bus_register(void);
void pcie_port_bus_unregister(void);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 9bcc856738ff..2ef046af08d2 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -25,13 +25,6 @@ struct portdrv_service_data {
u32 service;
};
-static int remove_iter(struct device *dev, void *data)
-{
- if (dev->bus == &pcie_port_bus_type)
- device_unregister(dev);
- return 0;
-}
-
static int find_service_iter(struct device *device, void *data)
{
struct pcie_port_service_driver *service_driver;
@@ -95,20 +88,6 @@ struct device *pcie_port_find_device(struct pci_dev *dev,
return device;
}
-/**
- * pcie_port_device_remove - unregister PCI Express port service devices
- * @dev: PCI Express port the service devices to unregister are associated with
- *
- * Remove PCI Express port service devices associated with given port and
- * disable MSI-X or MSI for the port.
- */
-void pcie_port_device_remove(struct pci_dev *dev)
-{
- device_for_each_child(&dev->dev, NULL, remove_iter);
- pci_free_irq_vectors(dev);
- pci_disable_device(dev);
-}
-
/**
* pcie_port_probe_service - probe driver for given PCI Express port service
* @dev: PCI Express port service device to probe against
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 1b7855a062ff..ab5e3a63981b 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -506,6 +506,27 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
return 0;
}
+static int remove_iter(struct device *dev, void *data)
+{
+ if (dev->bus == &pcie_port_bus_type)
+ device_unregister(dev);
+ return 0;
+}
+
+/**
+ * pcie_port_device_remove - unregister PCI Express port service devices
+ * @dev: PCI Express port the service devices to unregister are associated with
+ *
+ * Remove PCI Express port service devices associated with given port and
+ * disable MSI-X or MSI for the port.
+ */
+static void pcie_port_device_remove(struct pci_dev *dev)
+{
+ device_for_each_child(&dev->dev, NULL, remove_iter);
+ pci_free_irq_vectors(dev);
+ pci_disable_device(dev);
+}
+
static void pcie_portdrv_remove(struct pci_dev *dev)
{
if (pci_bridge_d3_possible(dev)) {
From: Bjorn Helgaas <[email protected]>
No functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/portdrv.h | 1
drivers/pci/pcie/portdrv_core.c | 327 ---------------------------------------
drivers/pci/pcie/portdrv_pci.c | 328 +++++++++++++++++++++++++++++++++++++++
3 files changed, 327 insertions(+), 329 deletions(-)
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 2bb5db7b53e6..7a2e5f0dfb53 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -79,7 +79,6 @@ void pcie_port_service_unregister(struct pcie_port_service_driver *new);
#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
extern struct bus_type pcie_port_bus_type;
-int pcie_port_device_register(struct pci_dev *dev);
#ifdef CONFIG_PM
int pcie_port_device_suspend(struct device *dev);
int pcie_port_device_resume(struct device *dev);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index e0261ad4bcdd..747a58d6aaf4 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -25,333 +25,6 @@ struct portdrv_service_data {
u32 service;
};
-/**
- * release_pcie_device - free PCI Express port service device structure
- * @dev: Port service device to release
- *
- * Invoked automatically when device is being removed in response to
- * device_unregister(dev). Release all resources being claimed.
- */
-static void release_pcie_device(struct device *dev)
-{
- kfree(to_pcie_device(dev));
-}
-
-/*
- * Fill in *pme, *aer, *dpc with the relevant Interrupt Message Numbers if
- * services are enabled in "mask". Return the number of MSI/MSI-X vectors
- * required to accommodate the largest Message Number.
- */
-static int pcie_message_numbers(struct pci_dev *dev, int mask,
- u32 *pme, u32 *aer, u32 *dpc)
-{
- u32 nvec = 0, pos;
- u16 reg16;
-
- /*
- * The Interrupt Message Number indicates which vector is used, i.e.,
- * the MSI-X table entry or the MSI offset between the base Message
- * Data and the generated interrupt message. See PCIe r3.1, sec
- * 7.8.2, 7.10.10, 7.31.2.
- */
-
- if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
- pcie_capability_read_word(dev, PCI_EXP_FLAGS, ®16);
- *pme = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9;
- nvec = *pme + 1;
- }
-
-#ifdef CONFIG_PCIEAER
- if (mask & PCIE_PORT_SERVICE_AER) {
- u32 reg32;
-
- pos = dev->aer_cap;
- if (pos) {
- pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS,
- ®32);
- *aer = (reg32 & PCI_ERR_ROOT_AER_IRQ) >> 27;
- nvec = max(nvec, *aer + 1);
- }
- }
-#endif
-
- if (mask & PCIE_PORT_SERVICE_DPC) {
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC);
- if (pos) {
- pci_read_config_word(dev, pos + PCI_EXP_DPC_CAP,
- ®16);
- *dpc = reg16 & PCI_EXP_DPC_IRQ;
- nvec = max(nvec, *dpc + 1);
- }
- }
-
- return nvec;
-}
-
-/**
- * pcie_port_enable_irq_vec - try to set up MSI-X or MSI as interrupt mode
- * for given port
- * @dev: PCI Express port to handle
- * @irqs: Array of interrupt vectors to populate
- * @mask: Bitmask of port capabilities returned by get_port_device_capability()
- *
- * Return value: 0 on success, error code on failure
- */
-static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask)
-{
- int nr_entries, nvec;
- u32 pme = 0, aer = 0, dpc = 0;
-
- /* Allocate the maximum possible number of MSI/MSI-X vectors */
- nr_entries = pci_alloc_irq_vectors(dev, 1, PCIE_PORT_MAX_MSI_ENTRIES,
- PCI_IRQ_MSIX | PCI_IRQ_MSI);
- if (nr_entries < 0)
- return nr_entries;
-
- /* See how many and which Interrupt Message Numbers we actually use */
- nvec = pcie_message_numbers(dev, mask, &pme, &aer, &dpc);
- if (nvec > nr_entries) {
- pci_free_irq_vectors(dev);
- return -EIO;
- }
-
- /*
- * If we allocated more than we need, free them and reallocate fewer.
- *
- * Reallocating may change the specific vectors we get, so
- * pci_irq_vector() must be done *after* the reallocation.
- *
- * If we're using MSI, hardware is *allowed* to change the Interrupt
- * Message Numbers when we free and reallocate the vectors, but we
- * assume it won't because we allocate enough vectors for the
- * biggest Message Number we found.
- */
- if (nvec != nr_entries) {
- pci_free_irq_vectors(dev);
-
- nr_entries = pci_alloc_irq_vectors(dev, nvec, nvec,
- PCI_IRQ_MSIX | PCI_IRQ_MSI);
- if (nr_entries < 0)
- return nr_entries;
- }
-
- /* PME and hotplug share an MSI/MSI-X vector */
- if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
- irqs[PCIE_PORT_SERVICE_PME_SHIFT] = pci_irq_vector(dev, pme);
- irqs[PCIE_PORT_SERVICE_HP_SHIFT] = pci_irq_vector(dev, pme);
- }
-
- if (mask & PCIE_PORT_SERVICE_AER)
- irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pci_irq_vector(dev, aer);
-
- if (mask & PCIE_PORT_SERVICE_DPC)
- irqs[PCIE_PORT_SERVICE_DPC_SHIFT] = pci_irq_vector(dev, dpc);
-
- return 0;
-}
-
-/**
- * pcie_init_service_irqs - initialize irqs for PCI Express port services
- * @dev: PCI Express port to handle
- * @irqs: Array of irqs to populate
- * @mask: Bitmask of port capabilities returned by get_port_device_capability()
- *
- * Return value: Interrupt mode associated with the port
- */
-static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
-{
- int ret, i;
-
- for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
- irqs[i] = -1;
-
- /*
- * If we support PME but can't use MSI/MSI-X for it, we have to
- * fall back to INTx or other interrupts, e.g., a system shared
- * interrupt.
- */
- if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi())
- goto legacy_irq;
-
- /* Try to use MSI-X or MSI if supported */
- if (pcie_port_enable_irq_vec(dev, irqs, mask) == 0)
- return 0;
-
-legacy_irq:
- /* fall back to legacy IRQ */
- ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
- if (ret < 0)
- return -ENODEV;
-
- for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
- irqs[i] = pci_irq_vector(dev, 0);
-
- return 0;
-}
-
-/**
- * get_port_device_capability - discover capabilities of a PCI Express port
- * @dev: PCI Express port to examine
- *
- * The capabilities are read from the port's PCI Express configuration registers
- * as described in PCI Express Base Specification 1.0a sections 7.8.2, 7.8.9 and
- * 7.9 - 7.11.
- *
- * Return value: Bitmask of discovered port capabilities
- */
-static int get_port_device_capability(struct pci_dev *dev)
-{
- struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
- int services = 0;
-
- if (dev->is_hotplug_bridge &&
- (pcie_ports_native || host->native_pcie_hotplug)) {
- services |= PCIE_PORT_SERVICE_HP;
-
- /*
- * Disable hot-plug interrupts in case they have been enabled
- * by the BIOS and the hot-plug service driver is not loaded.
- */
- pcie_capability_clear_word(dev, PCI_EXP_SLTCTL,
- PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
- }
-
-#ifdef CONFIG_PCIEAER
- if (dev->aer_cap && pci_aer_available() &&
- (pcie_ports_native || host->native_aer)) {
- services |= PCIE_PORT_SERVICE_AER;
-
- /*
- * Disable AER on this port in case it's been enabled by the
- * BIOS (the AER service driver will enable it when necessary).
- */
- pci_disable_pcie_error_reporting(dev);
- }
-#endif
-
- /*
- * Root ports are capable of generating PME too. Root Complex
- * Event Collectors can also generate PMEs, but we don't handle
- * those yet.
- */
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT &&
- (pcie_ports_native || host->native_pme)) {
- services |= PCIE_PORT_SERVICE_PME;
-
- /*
- * Disable PME interrupt on this port in case it's been enabled
- * by the BIOS (the PME service driver will enable it when
- * necessary).
- */
- pcie_pme_interrupt_enable(dev, false);
- }
-
- if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
- pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
- services |= PCIE_PORT_SERVICE_DPC;
-
- return services;
-}
-
-/**
- * pcie_device_init - allocate and initialize PCI Express port service device
- * @pdev: PCI Express port to associate the service device with
- * @service: Type of service to associate with the service device
- * @irq: Interrupt vector to associate with the service device
- */
-static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
-{
- int retval;
- struct pcie_device *pcie;
- struct device *device;
-
- pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
- if (!pcie)
- return -ENOMEM;
- pcie->port = pdev;
- pcie->irq = irq;
- pcie->service = service;
-
- /* Initialize generic device interface */
- device = &pcie->device;
- device->bus = &pcie_port_bus_type;
- device->release = release_pcie_device; /* callback to free pcie dev */
- dev_set_name(device, "%s:pcie%03x",
- pci_name(pdev),
- get_descriptor_id(pci_pcie_type(pdev), service));
- device->parent = &pdev->dev;
- device_enable_async_suspend(device);
-
- retval = device_register(device);
- if (retval) {
- put_device(device);
- return retval;
- }
-
- pm_runtime_no_callbacks(device);
-
- return 0;
-}
-
-/**
- * pcie_port_device_register - register PCI Express port
- * @dev: PCI Express port to register
- *
- * Allocate the port extension structure and register services associated with
- * the port.
- */
-int pcie_port_device_register(struct pci_dev *dev)
-{
- int status, capabilities, i, nr_service;
- int irqs[PCIE_PORT_DEVICE_MAXSERVICES];
-
- /* Enable PCI Express port device */
- status = pci_enable_device(dev);
- if (status)
- return status;
-
- /* Get and check PCI Express port services */
- capabilities = get_port_device_capability(dev);
- if (!capabilities)
- return 0;
-
- pci_set_master(dev);
- /*
- * Initialize service irqs. Don't use service devices that
- * require interrupts if there is no way to generate them.
- * However, some drivers may have a polling mode (e.g. pciehp_poll_mode)
- * that can be used in the absence of irqs. Allow them to determine
- * if that is to be used.
- */
- status = pcie_init_service_irqs(dev, irqs, capabilities);
- if (status) {
- capabilities &= PCIE_PORT_SERVICE_HP;
- if (!capabilities)
- goto error_disable;
- }
-
- /* Allocate child services if any */
- status = -ENODEV;
- nr_service = 0;
- for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
- int service = 1 << i;
- if (!(capabilities & service))
- continue;
- if (!pcie_device_init(dev, service, irqs[i]))
- nr_service++;
- }
- if (!nr_service)
- goto error_cleanup_irqs;
-
- return 0;
-
-error_cleanup_irqs:
- pci_free_irq_vectors(dev);
-error_disable:
- pci_disable_device(dev);
- return status;
-}
-
#ifdef CONFIG_PM
static int suspend_iter(struct device *dev, void *data)
{
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index b8b99dd07c0c..08c605734d98 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -93,13 +93,339 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
#define PCIE_PORTDRV_PM_OPS NULL
#endif /* !PM */
+/**
+ * release_pcie_device - free PCI Express port service device structure
+ * @dev: Port service device to release
+ *
+ * Invoked automatically when device is being removed in response to
+ * device_unregister(dev). Release all resources being claimed.
+ */
+static void release_pcie_device(struct device *dev)
+{
+ kfree(to_pcie_device(dev));
+}
+
+/*
+ * Fill in *pme, *aer, *dpc with the relevant Interrupt Message Numbers if
+ * services are enabled in "mask". Return the number of MSI/MSI-X vectors
+ * required to accommodate the largest Message Number.
+ */
+static int pcie_message_numbers(struct pci_dev *dev, int mask,
+ u32 *pme, u32 *aer, u32 *dpc)
+{
+ u32 nvec = 0, pos;
+ u16 reg16;
+
+ /*
+ * The Interrupt Message Number indicates which vector is used, i.e.,
+ * the MSI-X table entry or the MSI offset between the base Message
+ * Data and the generated interrupt message. See PCIe r3.1, sec
+ * 7.8.2, 7.10.10, 7.31.2.
+ */
+
+ if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
+ pcie_capability_read_word(dev, PCI_EXP_FLAGS, ®16);
+ *pme = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9;
+ nvec = *pme + 1;
+ }
+
+#ifdef CONFIG_PCIEAER
+ if (mask & PCIE_PORT_SERVICE_AER) {
+ u32 reg32;
+
+ pos = dev->aer_cap;
+ if (pos) {
+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS,
+ ®32);
+ *aer = (reg32 & PCI_ERR_ROOT_AER_IRQ) >> 27;
+ nvec = max(nvec, *aer + 1);
+ }
+ }
+#endif
+
+ if (mask & PCIE_PORT_SERVICE_DPC) {
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_EXP_DPC_CAP,
+ ®16);
+ *dpc = reg16 & PCI_EXP_DPC_IRQ;
+ nvec = max(nvec, *dpc + 1);
+ }
+ }
+
+ return nvec;
+}
+
+/**
+ * pcie_port_enable_irq_vec - try to set up MSI-X or MSI as interrupt mode
+ * for given port
+ * @dev: PCI Express port to handle
+ * @irqs: Array of interrupt vectors to populate
+ * @mask: Bitmask of port capabilities returned by get_port_device_capability()
+ *
+ * Return value: 0 on success, error code on failure
+ */
+static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask)
+{
+ int nr_entries, nvec;
+ u32 pme = 0, aer = 0, dpc = 0;
+
+ /* Allocate the maximum possible number of MSI/MSI-X vectors */
+ nr_entries = pci_alloc_irq_vectors(dev, 1, PCIE_PORT_MAX_MSI_ENTRIES,
+ PCI_IRQ_MSIX | PCI_IRQ_MSI);
+ if (nr_entries < 0)
+ return nr_entries;
+
+ /* See how many and which Interrupt Message Numbers we actually use */
+ nvec = pcie_message_numbers(dev, mask, &pme, &aer, &dpc);
+ if (nvec > nr_entries) {
+ pci_free_irq_vectors(dev);
+ return -EIO;
+ }
+
+ /*
+ * If we allocated more than we need, free them and reallocate fewer.
+ *
+ * Reallocating may change the specific vectors we get, so
+ * pci_irq_vector() must be done *after* the reallocation.
+ *
+ * If we're using MSI, hardware is *allowed* to change the Interrupt
+ * Message Numbers when we free and reallocate the vectors, but we
+ * assume it won't because we allocate enough vectors for the
+ * biggest Message Number we found.
+ */
+ if (nvec != nr_entries) {
+ pci_free_irq_vectors(dev);
+
+ nr_entries = pci_alloc_irq_vectors(dev, nvec, nvec,
+ PCI_IRQ_MSIX | PCI_IRQ_MSI);
+ if (nr_entries < 0)
+ return nr_entries;
+ }
+
+ /* PME and hotplug share an MSI/MSI-X vector */
+ if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
+ irqs[PCIE_PORT_SERVICE_PME_SHIFT] = pci_irq_vector(dev, pme);
+ irqs[PCIE_PORT_SERVICE_HP_SHIFT] = pci_irq_vector(dev, pme);
+ }
+
+ if (mask & PCIE_PORT_SERVICE_AER)
+ irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pci_irq_vector(dev, aer);
+
+ if (mask & PCIE_PORT_SERVICE_DPC)
+ irqs[PCIE_PORT_SERVICE_DPC_SHIFT] = pci_irq_vector(dev, dpc);
+
+ return 0;
+}
+
+/**
+ * pcie_init_service_irqs - initialize irqs for PCI Express port services
+ * @dev: PCI Express port to handle
+ * @irqs: Array of irqs to populate
+ * @mask: Bitmask of port capabilities returned by get_port_device_capability()
+ *
+ * Return value: Interrupt mode associated with the port
+ */
+static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
+{
+ int ret, i;
+
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+ irqs[i] = -1;
+
+ /*
+ * If we support PME but can't use MSI/MSI-X for it, we have to
+ * fall back to INTx or other interrupts, e.g., a system shared
+ * interrupt.
+ */
+ if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi())
+ goto legacy_irq;
+
+ /* Try to use MSI-X or MSI if supported */
+ if (pcie_port_enable_irq_vec(dev, irqs, mask) == 0)
+ return 0;
+
+legacy_irq:
+ /* fall back to legacy IRQ */
+ ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
+ if (ret < 0)
+ return -ENODEV;
+
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+ irqs[i] = pci_irq_vector(dev, 0);
+
+ return 0;
+}
+
+/**
+ * get_port_device_capability - discover capabilities of a PCI Express port
+ * @dev: PCI Express port to examine
+ *
+ * The capabilities are read from the port's PCI Express configuration registers
+ * as described in PCI Express Base Specification 1.0a sections 7.8.2, 7.8.9 and
+ * 7.9 - 7.11.
+ *
+ * Return value: Bitmask of discovered port capabilities
+ */
+static int get_port_device_capability(struct pci_dev *dev)
+{
+ struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+ int services = 0;
+
+ if (dev->is_hotplug_bridge &&
+ (pcie_ports_native || host->native_pcie_hotplug)) {
+ services |= PCIE_PORT_SERVICE_HP;
+
+ /*
+ * Disable hot-plug interrupts in case they have been enabled
+ * by the BIOS and the hot-plug service driver is not loaded.
+ */
+ pcie_capability_clear_word(dev, PCI_EXP_SLTCTL,
+ PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
+ }
+
+#ifdef CONFIG_PCIEAER
+ if (dev->aer_cap && pci_aer_available() &&
+ (pcie_ports_native || host->native_aer)) {
+ services |= PCIE_PORT_SERVICE_AER;
+
+ /*
+ * Disable AER on this port in case it's been enabled by the
+ * BIOS (the AER service driver will enable it when necessary).
+ */
+ pci_disable_pcie_error_reporting(dev);
+ }
+#endif
+
+ /*
+ * Root ports are capable of generating PME too. Root Complex
+ * Event Collectors can also generate PMEs, but we don't handle
+ * those yet.
+ */
+ if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT &&
+ (pcie_ports_native || host->native_pme)) {
+ services |= PCIE_PORT_SERVICE_PME;
+
+ /*
+ * Disable PME interrupt on this port in case it's been enabled
+ * by the BIOS (the PME service driver will enable it when
+ * necessary).
+ */
+ pcie_pme_interrupt_enable(dev, false);
+ }
+
+ if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
+ pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
+ services |= PCIE_PORT_SERVICE_DPC;
+
+ return services;
+}
+
+/**
+ * pcie_device_init - allocate and initialize PCI Express port service device
+ * @pdev: PCI Express port to associate the service device with
+ * @service: Type of service to associate with the service device
+ * @irq: Interrupt vector to associate with the service device
+ */
+static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
+{
+ int retval;
+ struct pcie_device *pcie;
+ struct device *device;
+
+ pcie = kzalloc(sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+ pcie->port = pdev;
+ pcie->irq = irq;
+ pcie->service = service;
+
+ /* Initialize generic device interface */
+ device = &pcie->device;
+ device->bus = &pcie_port_bus_type;
+ device->release = release_pcie_device; /* callback to free pcie dev */
+ dev_set_name(device, "%s:pcie%03x",
+ pci_name(pdev),
+ get_descriptor_id(pci_pcie_type(pdev), service));
+ device->parent = &pdev->dev;
+ device_enable_async_suspend(device);
+
+ retval = device_register(device);
+ if (retval) {
+ put_device(device);
+ return retval;
+ }
+
+ pm_runtime_no_callbacks(device);
+
+ return 0;
+}
+
+/**
+ * pcie_port_device_register - register PCI Express port
+ * @dev: PCI Express port to register
+ *
+ * Allocate the port extension structure and register services associated with
+ * the port.
+ */
+int pcie_port_device_register(struct pci_dev *dev)
+{
+ int status, capabilities, i, nr_service;
+ int irqs[PCIE_PORT_DEVICE_MAXSERVICES];
+
+ /* Enable PCI Express port device */
+ status = pci_enable_device(dev);
+ if (status)
+ return status;
+
+ /* Get and check PCI Express port services */
+ capabilities = get_port_device_capability(dev);
+ if (!capabilities)
+ return 0;
+
+ pci_set_master(dev);
+ /*
+ * Initialize service irqs. Don't use service devices that
+ * require interrupts if there is no way to generate them.
+ * However, some drivers may have a polling mode (e.g. pciehp_poll_mode)
+ * that can be used in the absence of irqs. Allow them to determine
+ * if that is to be used.
+ */
+ status = pcie_init_service_irqs(dev, irqs, capabilities);
+ if (status) {
+ capabilities &= PCIE_PORT_SERVICE_HP;
+ if (!capabilities)
+ goto error_disable;
+ }
+
+ /* Allocate child services if any */
+ status = -ENODEV;
+ nr_service = 0;
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
+ int service = 1 << i;
+ if (!(capabilities & service))
+ continue;
+ if (!pcie_device_init(dev, service, irqs[i]))
+ nr_service++;
+ }
+ if (!nr_service)
+ goto error_cleanup_irqs;
+
+ return 0;
+
+error_cleanup_irqs:
+ pci_free_irq_vectors(dev);
+error_disable:
+ pci_disable_device(dev);
+ return status;
+}
+
/*
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
*
* If detected invokes the pcie_port_device_register() method for
* this port device.
- *
*/
static int pcie_portdrv_probe(struct pci_dev *dev,
const struct pci_device_id *id)
From: Bjorn Helgaas <[email protected]>
Squash service driver registration into portdrv_pci.c. No functional
change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/Makefile | 2 -
drivers/pci/pcie/portdrv_core.c | 116 ---------------------------------------
drivers/pci/pcie/portdrv_pci.c | 96 ++++++++++++++++++++++++++++++++
3 files changed, 97 insertions(+), 117 deletions(-)
delete mode 100644 drivers/pci/pcie/portdrv_core.c
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 03f4e0b3a140..aad431790b1d 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -2,7 +2,7 @@
#
# Makefile for PCI Express features and port driver
-pcieportdrv-y := portdrv_core.o portdrv_pci.o err.o
+pcieportdrv-y := portdrv_pci.o err.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
deleted file mode 100644
index 77b1c1ea8885..000000000000
--- a/drivers/pci/pcie/portdrv_core.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Purpose: PCI Express Port Bus Driver's Core Functions
- *
- * Copyright (C) 2004 Intel
- * Copyright (C) Tom Long Nguyen ([email protected])
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/pm.h>
-#include <linux/pm_runtime.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/aer.h>
-
-#include "../pci.h"
-#include "portdrv.h"
-
-/**
- * pcie_port_probe_service - probe driver for given PCI Express port service
- * @dev: PCI Express port service device to probe against
- *
- * If PCI Express port service driver is registered with
- * pcie_port_service_register(), this function will be called by the driver core
- * whenever match is found between the driver and a port service device.
- */
-static int pcie_port_probe_service(struct device *dev)
-{
- struct pcie_device *pciedev;
- struct pcie_port_service_driver *driver;
- int status;
-
- if (!dev || !dev->driver)
- return -ENODEV;
-
- driver = to_service_driver(dev->driver);
- if (!driver || !driver->probe)
- return -ENODEV;
-
- pciedev = to_pcie_device(dev);
- status = driver->probe(pciedev);
- if (status)
- return status;
-
- get_device(dev);
- return 0;
-}
-
-/**
- * pcie_port_remove_service - detach driver from given PCI Express port service
- * @dev: PCI Express port service device to handle
- *
- * If PCI Express port service driver is registered with
- * pcie_port_service_register(), this function will be called by the driver core
- * when device_unregister() is called for the port service device associated
- * with the driver.
- */
-static int pcie_port_remove_service(struct device *dev)
-{
- struct pcie_device *pciedev;
- struct pcie_port_service_driver *driver;
-
- if (!dev || !dev->driver)
- return 0;
-
- pciedev = to_pcie_device(dev);
- driver = to_service_driver(dev->driver);
- if (driver && driver->remove) {
- driver->remove(pciedev);
- put_device(dev);
- }
- return 0;
-}
-
-/**
- * pcie_port_shutdown_service - shut down given PCI Express port service
- * @dev: PCI Express port service device to handle
- *
- * If PCI Express port service driver is registered with
- * pcie_port_service_register(), this function will be called by the driver core
- * when device_shutdown() is called for the port service device associated
- * with the driver.
- */
-static void pcie_port_shutdown_service(struct device *dev) {}
-
-/**
- * pcie_port_service_register - register PCI Express port service driver
- * @new: PCI Express port service driver to register
- */
-int pcie_port_service_register(struct pcie_port_service_driver *new)
-{
- if (pcie_ports_disabled)
- return -ENODEV;
-
- new->driver.name = new->name;
- new->driver.bus = &pcie_port_bus_type;
- new->driver.probe = pcie_port_probe_service;
- new->driver.remove = pcie_port_remove_service;
- new->driver.shutdown = pcie_port_shutdown_service;
-
- return driver_register(&new->driver);
-}
-EXPORT_SYMBOL(pcie_port_service_register);
-
-/**
- * pcie_port_service_unregister - unregister PCI Express port service driver
- * @drv: PCI Express port service driver to unregister
- */
-void pcie_port_service_unregister(struct pcie_port_service_driver *drv)
-{
- driver_unregister(&drv->driver);
-}
-EXPORT_SYMBOL(pcie_port_service_unregister);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index b019af97f14e..1375e91c268f 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -110,6 +110,102 @@ struct device *pcie_port_find_device(struct pci_dev *dev, u32 service)
return device;
}
+/**
+ * pcie_port_probe_service - probe driver for given PCI Express port service
+ * @dev: PCI Express port service device to probe against
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * whenever match is found between the driver and a port service device.
+ */
+static int pcie_port_probe_service(struct device *dev)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+ int status;
+
+ if (!dev || !dev->driver)
+ return -ENODEV;
+
+ driver = to_service_driver(dev->driver);
+ if (!driver || !driver->probe)
+ return -ENODEV;
+
+ pciedev = to_pcie_device(dev);
+ status = driver->probe(pciedev);
+ if (status)
+ return status;
+
+ get_device(dev);
+ return 0;
+}
+
+/**
+ * pcie_port_remove_service - detach driver from given PCI Express port service
+ * @dev: PCI Express port service device to handle
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * when device_unregister() is called for the port service device associated
+ * with the driver.
+ */
+static int pcie_port_remove_service(struct device *dev)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+
+ if (!dev || !dev->driver)
+ return 0;
+
+ pciedev = to_pcie_device(dev);
+ driver = to_service_driver(dev->driver);
+ if (driver && driver->remove) {
+ driver->remove(pciedev);
+ put_device(dev);
+ }
+ return 0;
+}
+
+/**
+ * pcie_port_shutdown_service - shut down given PCI Express port service
+ * @dev: PCI Express port service device to handle
+ *
+ * If PCI Express port service driver is registered with
+ * pcie_port_service_register(), this function will be called by the driver core
+ * when device_shutdown() is called for the port service device associated
+ * with the driver.
+ */
+static void pcie_port_shutdown_service(struct device *dev) {}
+
+/**
+ * pcie_port_service_register - register PCI Express port service driver
+ * @new: PCI Express port service driver to register
+ */
+int pcie_port_service_register(struct pcie_port_service_driver *new)
+{
+ if (pcie_ports_disabled)
+ return -ENODEV;
+
+ new->driver.name = new->name;
+ new->driver.bus = &pcie_port_bus_type;
+ new->driver.probe = pcie_port_probe_service;
+ new->driver.remove = pcie_port_remove_service;
+ new->driver.shutdown = pcie_port_shutdown_service;
+
+ return driver_register(&new->driver);
+}
+EXPORT_SYMBOL(pcie_port_service_register);
+
+/**
+ * pcie_port_service_unregister - unregister PCI Express port service driver
+ * @drv: PCI Express port service driver to unregister
+ */
+void pcie_port_service_unregister(struct pcie_port_service_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(pcie_port_service_unregister);
+
static int pcie_portdrv_restore_config(struct pci_dev *dev)
{
int retval;
From: Bjorn Helgaas <[email protected]>
pcie_port_device_suspend() and pcie_port_device_resume() were defined in
portdrv_core.c and only used in portdrv_pci.c. Move them there and make
them static. No functional change intended.
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pcie/portdrv.h | 4 ---
drivers/pci/pcie/portdrv_core.c | 45 ---------------------------------------
drivers/pci/pcie/portdrv_pci.c | 43 +++++++++++++++++++++++++++++++++++++
3 files changed, 43 insertions(+), 49 deletions(-)
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 7a2e5f0dfb53..cb2a33ea68a5 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -79,10 +79,6 @@ void pcie_port_service_unregister(struct pcie_port_service_driver *new);
#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
extern struct bus_type pcie_port_bus_type;
-#ifdef CONFIG_PM
-int pcie_port_device_suspend(struct device *dev);
-int pcie_port_device_resume(struct device *dev);
-#endif
void pcie_port_device_remove(struct pci_dev *dev);
int __must_check pcie_port_bus_register(void);
void pcie_port_bus_unregister(void);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 747a58d6aaf4..9bcc856738ff 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -25,51 +25,6 @@ struct portdrv_service_data {
u32 service;
};
-#ifdef CONFIG_PM
-static int suspend_iter(struct device *dev, void *data)
-{
- struct pcie_port_service_driver *service_driver;
-
- if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
- service_driver = to_service_driver(dev->driver);
- if (service_driver->suspend)
- service_driver->suspend(to_pcie_device(dev));
- }
- return 0;
-}
-
-/**
- * pcie_port_device_suspend - suspend port services associated with a PCIe port
- * @dev: PCI Express port to handle
- */
-int pcie_port_device_suspend(struct device *dev)
-{
- return device_for_each_child(dev, NULL, suspend_iter);
-}
-
-static int resume_iter(struct device *dev, void *data)
-{
- struct pcie_port_service_driver *service_driver;
-
- if ((dev->bus == &pcie_port_bus_type) &&
- (dev->driver)) {
- service_driver = to_service_driver(dev->driver);
- if (service_driver->resume)
- service_driver->resume(to_pcie_device(dev));
- }
- return 0;
-}
-
-/**
- * pcie_port_device_resume - resume port services associated with a PCIe port
- * @dev: PCI Express port to handle
- */
-int pcie_port_device_resume(struct device *dev)
-{
- return device_for_each_child(dev, NULL, resume_iter);
-}
-#endif /* PM */
-
static int remove_iter(struct device *dev, void *data)
{
if (dev->bus == &pcie_port_bus_type)
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 08c605734d98..1b7855a062ff 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -54,6 +54,49 @@ static int pcie_portdrv_restore_config(struct pci_dev *dev)
}
#ifdef CONFIG_PM
+static int suspend_iter(struct device *dev, void *data)
+{
+ struct pcie_port_service_driver *service_driver;
+
+ if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
+ service_driver = to_service_driver(dev->driver);
+ if (service_driver->suspend)
+ service_driver->suspend(to_pcie_device(dev));
+ }
+ return 0;
+}
+
+/**
+ * pcie_port_device_suspend - suspend port services associated with a PCIe port
+ * @dev: PCI Express port to handle
+ */
+static int pcie_port_device_suspend(struct device *dev)
+{
+ return device_for_each_child(dev, NULL, suspend_iter);
+}
+
+static int resume_iter(struct device *dev, void *data)
+{
+ struct pcie_port_service_driver *service_driver;
+
+ if ((dev->bus == &pcie_port_bus_type) &&
+ (dev->driver)) {
+ service_driver = to_service_driver(dev->driver);
+ if (service_driver->resume)
+ service_driver->resume(to_pcie_device(dev));
+ }
+ return 0;
+}
+
+/**
+ * pcie_port_device_resume - resume port services associated with a PCIe port
+ * @dev: PCI Express port to handle
+ */
+static int pcie_port_device_resume(struct device *dev)
+{
+ return device_for_each_child(dev, NULL, resume_iter);
+}
+
static int pcie_port_runtime_suspend(struct device *dev)
{
return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
On 2018-06-09 01:42, Bjorn Helgaas wrote:
> The portdrv code is scattered across several files, which makes it a
> bit of
> a hassle to browse. Consolidate it all in a single file.
>
Although I do not have any objection is merging the code,
It looks to me that the 2 files served purpose of keeping
portdrv device functionality in one file > portdrv_pci.c
while, port driver helper and exported service functions for services
are in > portdrv_core.c
If that was the original intention, it just looks okay to me.
But I am not sure the way the code is now, we can call is scattered,
and also I do not think by merging it, we can call it more organised.
although certainly it looks easier to browse as you are suggesting.
little less confusing.
> This is all pure code moves; no functional changes intended. Well,
> there
> is a function rename, but it shouldn't change any behavior.
>
> ---
>
> Bjorn Helgaas (9):
> PCI/portdrv: Rename resume_iter() to prevent name collision
> PCI/portdrv: Squash pieces of portdrv_core.c into portdrv_pci.c
> PCI/portdrv: Squash PM-related code into portdrv_pci.c
> PCI/portdrv: Squash device removal code into portdrv_pci.c
> PCI/portdrv: Squash lookup interfaces into portdrv_pci.c
> PCI/portdrv: Squash service driver registration into
> portdrv_pci.c
> PCI/portdrv: Move private definitions to portdrv_pci.c
> PCI/portdrv: Clean up whitespace
> PCI/portdrv: Rename portdrv_pci.c to portdrv.c
>
>
> drivers/pci/pcie/Makefile | 6
> drivers/pci/pcie/portdrv.c | 822
> +++++++++++++++++++++++++++++++++++++++
> drivers/pci/pcie/portdrv.h | 15 -
> drivers/pci/pcie/portdrv_core.c | 578 ---------------------------
> drivers/pci/pcie/portdrv_pci.c | 261 ------------
> 5 files changed, 824 insertions(+), 858 deletions(-)
> create mode 100644 drivers/pci/pcie/portdrv.c
> delete mode 100644 drivers/pci/pcie/portdrv_core.c
> delete mode 100644 drivers/pci/pcie/portdrv_pci.c