This patch enables the EDAC driver support to Hygon Family 18h CPU:
- Add MCE support for Hygon Family 18h.
- Add HYGON_F18_CPUS in amd_families enum to enable Hygon Family 18h support.
- Add HYGON_F18_CPUS in family_types[] to support Hygon Family 18h.
- Add Hygon Family 18h support in determine_memory_type(), per_family_init()
and scrub rate codes.
- Add X86_VENDOR_HYGON in amd64_cpuids[].
Signed-off-by: Pu Wen <[email protected]>
---
drivers/edac/amd64_edac.c | 20 +++++++++++++++++++-
drivers/edac/amd64_edac.h | 4 ++++
drivers/edac/mce_amd.c | 4 +++-
3 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 329cb96..a2e02c5 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -211,7 +211,7 @@ static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
scrubval = scrubrates[i].scrubval;
- if (pvt->fam == 0x17) {
+ if (pvt->fam == 0x17 || pvt->fam == 0x18) {
__f17h_set_scrubval(pvt, scrubval);
} else if (pvt->fam == 0x15 && pvt->model == 0x60) {
f15h_select_dct(pvt, 0);
@@ -264,6 +264,7 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
break;
case 0x17:
+ case 0x18:
amd64_read_pci_cfg(pvt->F6, F17H_SCR_BASE_ADDR, &scrubval);
if (scrubval & BIT(0)) {
amd64_read_pci_cfg(pvt->F6, F17H_SCR_LIMIT_ADDR, &scrubval);
@@ -1044,6 +1045,7 @@ static void determine_memory_type(struct amd64_pvt *pvt)
goto ddr3;
case 0x17:
+ case 0x18:
if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(5))
pvt->dram_type = MEM_LRDDR4;
else if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(4))
@@ -2200,6 +2202,16 @@ static struct amd64_family_type family_types[] = {
.dbam_to_cs = f17_base_addr_to_cs_size,
}
},
+ [HYGON_F18_CPUS] = {
+ /* Hygon F18h uses the same AMD F17h support */
+ .ctl_name = "Hygon_F18h",
+ .f0_id = PCI_DEVICE_ID_HYGON_18H_DF_F0,
+ .f6_id = PCI_DEVICE_ID_HYGON_18H_DF_F6,
+ .ops = {
+ .early_channel_count = f17_early_channel_count,
+ .dbam_to_cs = f17_base_addr_to_cs_size,
+ }
+ },
};
/*
@@ -3192,6 +3204,11 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
pvt->ops = &family_types[F17_CPUS].ops;
break;
+ case 0x18:
+ fam_type = &family_types[HYGON_F18_CPUS];
+ pvt->ops = &family_types[HYGON_F18_CPUS].ops;
+ break;
+
default:
amd64_err("Unsupported family!\n");
return NULL;
@@ -3428,6 +3445,7 @@ static const struct x86_cpu_id amd64_cpuids[] = {
{ X86_VENDOR_AMD, 0x15, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
{ X86_VENDOR_AMD, 0x16, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
{ X86_VENDOR_AMD, 0x17, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
+ { X86_VENDOR_HYGON, 0x18, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
{ }
};
MODULE_DEVICE_TABLE(x86cpu, amd64_cpuids);
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 1d4b74e..3dec27d 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -116,6 +116,9 @@
#define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460
#define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466
+#define PCI_DEVICE_ID_HYGON_18H_DF_F0 PCI_DEVICE_ID_AMD_17H_DF_F0
+#define PCI_DEVICE_ID_HYGON_18H_DF_F6 PCI_DEVICE_ID_AMD_17H_DF_F6
+
/*
* Function 1 - Address Map
*/
@@ -281,6 +284,7 @@ enum amd_families {
F16_CPUS,
F16_M30H_CPUS,
F17_CPUS,
+ HYGON_F18_CPUS,
NUM_FAMILIES,
};
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index 2ab4d61..c605089 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -1059,7 +1059,8 @@ static int __init mce_amd_init(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
- if (c->x86_vendor != X86_VENDOR_AMD)
+ if (c->x86_vendor != X86_VENDOR_AMD &&
+ c->x86_vendor != X86_VENDOR_HYGON)
return -ENODEV;
fam_ops = kzalloc(sizeof(struct amd_decoder_ops), GFP_KERNEL);
@@ -1113,6 +1114,7 @@ static int __init mce_amd_init(void)
break;
case 0x17:
+ case 0x18:
xec_mask = 0x3f;
if (!boot_cpu_has(X86_FEATURE_SMCA)) {
printk(KERN_WARNING "Decoding supported only on Scalable MCA processors.\n");
--
2.7.4