Like other SATA controller chips in the Marvell 88SE91xx series, the
Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents
it from working under IOMMU. This patch adds its device ID 0x9125 to the
Function 1 DMA alias quirk list.
This patch should not be confused with an earlier patch, commit 059983790a4c
("PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller"),
which applies to a different chip with a similar model number, 88SE9215.
Without this patch, device initialization fails with DMA errors.
ata8: softreset failed (1st FIS failed)
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
After applying the patch, the controller can be successfully initialized.
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
ata8.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100
ata8.00: configured for UDMA/100
scsi 7:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5
Reported-by: sbingner <[email protected]>
Signed-off-by: Yifeng Li <[email protected]>
---
drivers/pci/quirks.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 003950c73..20a932690 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4103,6 +4103,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120,
quirk_dma_func1_alias);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c136 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9125,
+ quirk_dma_func1_alias);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
--
2.31.1