Currently, a hotplug bridge will be given hpmemsize additional memory if
available, in order to satisfy any future hotplug allocation
requirements.
These calculations don't consider the current memory size of the hotplug
bridge/slot, so hotplug bridges/slots which have downstream devices will
get their current allocation in addition to the hpmemsize value.
This makes for possibly undesirable results with a mix of unoccupied and
occupied slots (ex, with hpmemsize=2M):
02:03.0 PCI bridge: <-- Occupied
Memory behind bridge: d6200000-d64fffff [size=3M]
02:04.0 PCI bridge: <-- Unoccupied
Memory behind bridge: d6500000-d66fffff [size=2M]
This change considers the current allocation size when using the
hpmemsize parameter to make the reservations predictable for the mix of
unoccupied and occupied slots:
02:03.0 PCI bridge: <-- Occupied
Memory behind bridge: d6200000-d63fffff [size=2M]
02:04.0 PCI bridge: <-- Unoccupied
Memory behind bridge: d6400000-d65fffff [size=2M]
Signed-off-by: Jon Derrick <[email protected]>
---
Original RFC here:
https://patchwork.ozlabs.org/patch/945374/
I split this bit out from the RFC while awaiting the pci string handling
enhancements to handle per-device settings
Changed from RFC is a simpler algo
drivers/pci/setup-bus.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 79b1824..5ae39e6 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -831,7 +831,8 @@ static resource_size_t calculate_iosize(resource_size_t size,
static resource_size_t calculate_memsize(resource_size_t size,
resource_size_t min_size,
- resource_size_t size1,
+ resource_size_t add_size,
+ resource_size_t children_add_size,
resource_size_t old_size,
resource_size_t align)
{
@@ -841,7 +842,7 @@ static resource_size_t calculate_memsize(resource_size_t size,
old_size = 0;
if (size < old_size)
size = old_size;
- size = ALIGN(size + size1, align);
+ size = ALIGN(max(size, add_size) + children_add_size, align);
return size;
}
@@ -1079,12 +1080,10 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
min_align = calculate_mem_align(aligns, max_order);
min_align = max(min_align, window_alignment(bus, b_res->flags));
- size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
+ size0 = calculate_memsize(size, min_size, 0, 0, resource_size(b_res), min_align);
add_align = max(min_align, add_align);
- if (children_add_size > add_size)
- add_size = children_add_size;
- size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
- calculate_memsize(size, min_size, add_size,
+ size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
+ calculate_memsize(size, min_size, add_size, children_add_size,
resource_size(b_res), add_align);
if (!size0 && !size1) {
if (b_res->start || b_res->end)
--
1.8.3.1
It's been a few weeks. Thoughts on this one?
On Wed, 2018-07-25 at 17:02 -0600, Jon Derrick wrote:
> Currently, a hotplug bridge will be given hpmemsize additional memory
> if
> available, in order to satisfy any future hotplug allocation
> requirements.
>
> These calculations don't consider the current memory size of the
> hotplug
> bridge/slot, so hotplug bridges/slots which have downstream devices
> will
> get their current allocation in addition to the hpmemsize value.
>
> This makes for possibly undesirable results with a mix of unoccupied
> and
> occupied slots (ex, with hpmemsize=2M):
>
> 02:03.0 PCI bridge: <-- Occupied
> Memory behind bridge: d6200000-d64fffff [size=3M]
> 02:04.0 PCI bridge: <-- Unoccupied
> Memory behind bridge: d6500000-d66fffff [size=2M]
>
> This change considers the current allocation size when using the
> hpmemsize parameter to make the reservations predictable for the mix
> of
> unoccupied and occupied slots:
>
> 02:03.0 PCI bridge: <-- Occupied
> Memory behind bridge: d6200000-d63fffff [size=2M]
> 02:04.0 PCI bridge: <-- Unoccupied
> Memory behind bridge: d6400000-d65fffff [size=2M]
>
> Signed-off-by: Jon Derrick <[email protected]>
> ---
> Original RFC here:
> https://patchwork.ozlabs.org/patch/945374/
>
> I split this bit out from the RFC while awaiting the pci string
> handling
> enhancements to handle per-device settings
>
> Changed from RFC is a simpler algo
>
> drivers/pci/setup-bus.c | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> index 79b1824..5ae39e6 100644
> --- a/drivers/pci/setup-bus.c
> +++ b/drivers/pci/setup-bus.c
> @@ -831,7 +831,8 @@ static resource_size_t
> calculate_iosize(resource_size_t size,
>
> static resource_size_t calculate_memsize(resource_size_t size,
> resource_size_t min_size,
> - resource_size_t size1,
> + resource_size_t add_size,
> + resource_size_t children_add_size,
> resource_size_t old_size,
> resource_size_t align)
> {
> @@ -841,7 +842,7 @@ static resource_size_t
> calculate_memsize(resource_size_t size,
> old_size = 0;
> if (size < old_size)
> size = old_size;
> - size = ALIGN(size + size1, align);
> + size = ALIGN(max(size, add_size) + children_add_size,
> align);
> return size;
> }
>
> @@ -1079,12 +1080,10 @@ static int pbus_size_mem(struct pci_bus *bus,
> unsigned long mask,
>
> min_align = calculate_mem_align(aligns, max_order);
> min_align = max(min_align, window_alignment(bus, b_res-
> >flags));
> - size0 = calculate_memsize(size, min_size, 0,
> resource_size(b_res), min_align);
> + size0 = calculate_memsize(size, min_size, 0, 0,
> resource_size(b_res), min_align);
> add_align = max(min_align, add_align);
> - if (children_add_size > add_size)
> - add_size = children_add_size;
> - size1 = (!realloc_head || (realloc_head && !add_size)) ?
> size0 :
> - calculate_memsize(size, min_size, add_size,
> + size1 = (!realloc_head || (realloc_head && !add_size &&
> !children_add_size)) ? size0 :
> + calculate_memsize(size, min_size, add_size,
> children_add_size,
> resource_size(b_res), add_align);
> if (!size0 && !size1) {
> if (b_res->start || b_res->end)
On Wed, Jul 25, 2018 at 05:02:59PM -0600, Jon Derrick wrote:
> Currently, a hotplug bridge will be given hpmemsize additional memory if
> available, in order to satisfy any future hotplug allocation
> requirements.
>
> These calculations don't consider the current memory size of the hotplug
> bridge/slot, so hotplug bridges/slots which have downstream devices will
> get their current allocation in addition to the hpmemsize value.
>
> This makes for possibly undesirable results with a mix of unoccupied and
> occupied slots (ex, with hpmemsize=2M):
>
> 02:03.0 PCI bridge: <-- Occupied
> Memory behind bridge: d6200000-d64fffff [size=3M]
> 02:04.0 PCI bridge: <-- Unoccupied
> Memory behind bridge: d6500000-d66fffff [size=2M]
>
> This change considers the current allocation size when using the
> hpmemsize parameter to make the reservations predictable for the mix of
> unoccupied and occupied slots:
>
> 02:03.0 PCI bridge: <-- Occupied
> Memory behind bridge: d6200000-d63fffff [size=2M]
> 02:04.0 PCI bridge: <-- Unoccupied
> Memory behind bridge: d6400000-d65fffff [size=2M]
The I/O sizing code (pbus_size_io() and calculate_iosize()) is essentially
identical to the mem sizing code you're updating. I assume the same
considerations would apply there? If not, please include a note in the
changelog about why you changed the mem code but not the I/O code.
> Signed-off-by: Jon Derrick <[email protected]>
> ---
> Original RFC here:
> https://patchwork.ozlabs.org/patch/945374/
>
> I split this bit out from the RFC while awaiting the pci string handling
> enhancements to handle per-device settings
>
> Changed from RFC is a simpler algo
>
> drivers/pci/setup-bus.c | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> index 79b1824..5ae39e6 100644
> --- a/drivers/pci/setup-bus.c
> +++ b/drivers/pci/setup-bus.c
> @@ -831,7 +831,8 @@ static resource_size_t calculate_iosize(resource_size_t size,
>
> static resource_size_t calculate_memsize(resource_size_t size,
> resource_size_t min_size,
> - resource_size_t size1,
> + resource_size_t add_size,
> + resource_size_t children_add_size,
> resource_size_t old_size,
> resource_size_t align)
> {
> @@ -841,7 +842,7 @@ static resource_size_t calculate_memsize(resource_size_t size,
> old_size = 0;
> if (size < old_size)
> size = old_size;
> - size = ALIGN(size + size1, align);
> + size = ALIGN(max(size, add_size) + children_add_size, align);
> return size;
> }
>
> @@ -1079,12 +1080,10 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
>
> min_align = calculate_mem_align(aligns, max_order);
> min_align = max(min_align, window_alignment(bus, b_res->flags));
> - size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
> + size0 = calculate_memsize(size, min_size, 0, 0, resource_size(b_res), min_align);
> add_align = max(min_align, add_align);
> - if (children_add_size > add_size)
> - add_size = children_add_size;
> - size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
> - calculate_memsize(size, min_size, add_size,
> + size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
> + calculate_memsize(size, min_size, add_size, children_add_size,
> resource_size(b_res), add_align);
> if (!size0 && !size1) {
> if (b_res->start || b_res->end)
> --
> 1.8.3.1
>