This series adds support for SPI controller driver implemented on UniPhier SoCs.
Changes since v2:
- remove check code of clock divider in uniphier_spi_set_baudrate().
- change irq from struct variable to stack variable.
- other trivial change.
Keiji Hayashibara (1):
spi: add SPI controller driver for UniPhier SoC
Kunihiko Hayashi (1):
dt-bindings: spi: add DT bindings for UniPhier SPI controller
.../devicetree/bindings/spi/spi-uniphier.txt | 22 +
drivers/spi/Kconfig | 13 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-uniphier.c | 525 +++++++++++++++++++++
4 files changed, 561 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt
create mode 100644 drivers/spi/spi-uniphier.c
--
2.7.4
From: Kunihiko Hayashi <[email protected]>
Add DT bindings for SPI controller implemented in UniPhier SoCs.
Signed-off-by: Kunihiko Hayashi <[email protected]>
Signed-off-by: Keiji Hayashibara <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/spi/spi-uniphier.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
new file mode 100644
index 0000000..504a4ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -0,0 +1,22 @@
+Socionext UniPhier SPI controller driver
+
+UniPhier SoCs have SCSSI which supports SPI single channel.
+
+Required properties:
+ - compatible: should be "socionext,uniphier-scssi"
+ - reg: address and length of the spi master registers
+ - #address-cells: must be <1>, see spi-bus.txt
+ - #size-cells: must be <0>, see spi-bus.txt
+ - clocks: A phandle to the clock for the device.
+ - resets: A phandle to the reset control for the device.
+
+Example:
+
+spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ reg = <0x54006000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+};
--
2.7.4
Add SPI controller driver implemented in Socionext UniPhier SoCs.
UniPhier SoCs have two types SPI controllers; SCSSI supports a
single channel, and MCSSI supports multiple channels.
This driver supports SCSSI only.
This controller has 32bit TX/RX FIFO with depth of eight entry,
and supports the SPI master mode only.
This commit is implemented in PIO transfer mode, not DMA transfer.
Signed-off-by: Kunihiko Hayashi <[email protected]>
Signed-off-by: Keiji Hayashibara <[email protected]>
---
drivers/spi/Kconfig | 13 ++
drivers/spi/Makefile | 1 +
drivers/spi/spi-uniphier.c | 525 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 539 insertions(+)
create mode 100644 drivers/spi/spi-uniphier.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ad5d68e..671d078 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -688,6 +688,19 @@ config SPI_TXX9
help
SPI driver for Toshiba TXx9 MIPS SoCs
+config SPI_UNIPHIER
+ tristate "Socionext UniPhier SPI Controller"
+ depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+ help
+ This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
+
+ UniPhier SoCs have SCSSI and MCSSI SPI controllers.
+ Every UniPhier SoC has SCSSI which supports single channel.
+ Older UniPhier Pro4/Pro5 also has MCSSI which support multiple channels.
+ This driver supports SCSSI only.
+
+ If your SoC supports SCSSI, say Y here.
+
config SPI_XCOMM
tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
depends on I2C
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index cb1f437..a90d559 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -101,6 +101,7 @@ spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o
obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+obj-$(CONFIG_SPI_UNIPHIER) += spi-uniphier.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XLP) += spi-xlp.o
diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
new file mode 100644
index 0000000..0899854
--- /dev/null
+++ b/drivers/spi/spi-uniphier.c
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: GPL-2.0
+// spi-uniphier.c - Socionext UniPhier SPI controller driver
+// Copyright 2012 Panasonic Corporation
+// Copyright 2016-2018 Socionext Inc.
+
+#include <linux/kernel.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/unaligned.h>
+
+#define SSI_TIMEOUT_MS 2000
+#define SSI_MAX_CLK_DIVIDER 254
+#define SSI_MIN_CLK_DIVIDER 4
+
+struct uniphier_spi_priv {
+ void __iomem *base;
+ struct clk *clk;
+ struct spi_master *master;
+ struct completion xfer_done;
+
+ int error;
+ unsigned int tx_bytes;
+ unsigned int rx_bytes;
+ const u8 *tx_buf;
+ u8 *rx_buf;
+
+ bool is_save_param;
+ u8 bits_per_word;
+ u16 mode;
+ u32 speed_hz;
+};
+
+#define SSI_CTL 0x00
+#define SSI_CTL_EN BIT(0)
+
+#define SSI_CKS 0x04
+#define SSI_CKS_CKRAT_MASK GENMASK(7, 0)
+#define SSI_CKS_CKPHS BIT(14)
+#define SSI_CKS_CKINIT BIT(13)
+#define SSI_CKS_CKDLY BIT(12)
+
+#define SSI_TXWDS 0x08
+#define SSI_TXWDS_WDLEN_MASK GENMASK(13, 8)
+#define SSI_TXWDS_TDTF_MASK GENMASK(7, 6)
+#define SSI_TXWDS_DTLEN_MASK GENMASK(5, 0)
+
+#define SSI_RXWDS 0x0c
+#define SSI_RXWDS_DTLEN_MASK GENMASK(5, 0)
+
+#define SSI_FPS 0x10
+#define SSI_FPS_FSPOL BIT(15)
+#define SSI_FPS_FSTRT BIT(14)
+
+#define SSI_SR 0x14
+#define SSI_SR_RNE BIT(0)
+
+#define SSI_IE 0x18
+#define SSI_IE_RCIE BIT(3)
+#define SSI_IE_RORIE BIT(0)
+
+#define SSI_IS 0x1c
+#define SSI_IS_RXRS BIT(9)
+#define SSI_IS_RCID BIT(3)
+#define SSI_IS_RORID BIT(0)
+
+#define SSI_IC 0x1c
+#define SSI_IC_TCIC BIT(4)
+#define SSI_IC_RCIC BIT(3)
+#define SSI_IC_RORIC BIT(0)
+
+#define SSI_FC 0x20
+#define SSI_FC_TXFFL BIT(12)
+#define SSI_FC_TXFTH_MASK GENMASK(11, 8)
+#define SSI_FC_RXFFL BIT(4)
+#define SSI_FC_RXFTH_MASK GENMASK(3, 0)
+
+#define SSI_TXDR 0x24
+#define SSI_RXDR 0x24
+
+#define SSI_FIFO_DEPTH 8U
+
+static inline unsigned int bytes_per_word(unsigned int bits)
+{
+ return bits <= 8 ? 1 : (bits <= 16 ? 2 : 4);
+}
+
+static inline void uniphier_spi_irq_enable(struct spi_device *spi, u32 mask)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(priv->base + SSI_IE);
+ val |= mask;
+ writel(val, priv->base + SSI_IE);
+}
+
+static inline void uniphier_spi_irq_disable(struct spi_device *spi, u32 mask)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(priv->base + SSI_IE);
+ val &= ~mask;
+ writel(val, priv->base + SSI_IE);
+}
+
+static void uniphier_spi_set_mode(struct spi_device *spi)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val1, val2;
+
+ /*
+ * clock setting
+ * CKPHS capture timing. 0:rising edge, 1:falling edge
+ * CKINIT clock initial level. 0:low, 1:high
+ * CKDLY clock delay. 0:no delay, 1:delay depending on FSTRT
+ * (FSTRT=0: 1 clock, FSTRT=1: 0.5 clock)
+ *
+ * frame setting
+ * FSPOL frame signal porarity. 0: low, 1: high
+ * FSTRT start frame timing
+ * 0: rising edge of clock, 1: falling edge of clock
+ */
+ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
+ case SPI_MODE_0:
+ /* CKPHS=1, CKINIT=0, CKDLY=1, FSTRT=0 */
+ val1 = SSI_CKS_CKPHS | SSI_CKS_CKDLY;
+ val2 = 0;
+ break;
+ case SPI_MODE_1:
+ /* CKPHS=0, CKINIT=0, CKDLY=0, FSTRT=1 */
+ val1 = 0;
+ val2 = SSI_FPS_FSTRT;
+ break;
+ case SPI_MODE_2:
+ /* CKPHS=0, CKINIT=1, CKDLY=1, FSTRT=1 */
+ val1 = SSI_CKS_CKINIT | SSI_CKS_CKDLY;
+ val2 = SSI_FPS_FSTRT;
+ break;
+ case SPI_MODE_3:
+ /* CKPHS=1, CKINIT=1, CKDLY=0, FSTRT=0 */
+ val1 = SSI_CKS_CKPHS | SSI_CKS_CKINIT;
+ val2 = 0;
+ break;
+ }
+
+ if (!(spi->mode & SPI_CS_HIGH))
+ val2 |= SSI_FPS_FSPOL;
+
+ writel(val1, priv->base + SSI_CKS);
+ writel(val2, priv->base + SSI_FPS);
+
+ val1 = 0;
+ if (spi->mode & SPI_LSB_FIRST)
+ val1 |= FIELD_PREP(SSI_TXWDS_TDTF_MASK, 1);
+ writel(val1, priv->base + SSI_TXWDS);
+ writel(val1, priv->base + SSI_RXWDS);
+}
+
+static void uniphier_spi_set_transfer_size(struct spi_device *spi, int size)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(priv->base + SSI_TXWDS);
+ val &= ~(SSI_TXWDS_WDLEN_MASK | SSI_TXWDS_DTLEN_MASK);
+ val |= FIELD_PREP(SSI_TXWDS_WDLEN_MASK, size);
+ val |= FIELD_PREP(SSI_TXWDS_DTLEN_MASK, size);
+ writel(val, priv->base + SSI_TXWDS);
+
+ val = readl(priv->base + SSI_RXWDS);
+ val &= ~SSI_RXWDS_DTLEN_MASK;
+ val |= FIELD_PREP(SSI_RXWDS_DTLEN_MASK, size);
+ writel(val, priv->base + SSI_RXWDS);
+}
+
+static void uniphier_spi_set_baudrate(struct spi_device *spi,
+ unsigned int speed)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val, ckdiv;
+
+ /*
+ * the supported rates are even numbers from 4 to 254. (4,6,8...254)
+ * round up as we look for equal or less speed
+ */
+ ckdiv = DIV_ROUND_UP(clk_get_rate(priv->clk), speed);
+ ckdiv = round_up(ckdiv, 2);
+
+ val = readl(priv->base + SSI_CKS);
+ val &= ~SSI_CKS_CKRAT_MASK;
+ val |= ckdiv & SSI_CKS_CKRAT_MASK;
+ writel(val, priv->base + SSI_CKS);
+}
+
+static void uniphier_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ priv->error = 0;
+ priv->tx_buf = t->tx_buf;
+ priv->rx_buf = t->rx_buf;
+ priv->tx_bytes = priv->rx_bytes = t->len;
+
+ if (!priv->is_save_param || priv->mode != spi->mode) {
+ uniphier_spi_set_mode(spi);
+ priv->mode = spi->mode;
+ }
+
+ if (!priv->is_save_param || priv->bits_per_word != t->bits_per_word) {
+ uniphier_spi_set_transfer_size(spi, t->bits_per_word);
+ priv->bits_per_word = t->bits_per_word;
+ }
+
+ if (!priv->is_save_param || priv->speed_hz != t->speed_hz) {
+ uniphier_spi_set_baudrate(spi, t->speed_hz);
+ priv->speed_hz = t->speed_hz;
+ }
+
+ if (!priv->is_save_param)
+ priv->is_save_param = true;
+
+ /* reset FIFOs */
+ val = SSI_FC_TXFFL | SSI_FC_RXFFL;
+ writel(val, priv->base + SSI_FC);
+}
+
+static void uniphier_spi_send(struct uniphier_spi_priv *priv)
+{
+ int wsize;
+ u32 val = 0;
+
+ wsize = min(bytes_per_word(priv->bits_per_word), priv->tx_bytes);
+ priv->tx_bytes -= wsize;
+
+ if (priv->tx_buf) {
+ switch (wsize) {
+ case 1:
+ val = *priv->tx_buf;
+ break;
+ case 2:
+ val = get_unaligned_le16(priv->tx_buf);
+ break;
+ case 4:
+ val = get_unaligned_le32(priv->tx_buf);
+ break;
+ }
+
+ priv->tx_buf += wsize;
+ }
+
+ writel(val, priv->base + SSI_TXDR);
+}
+
+static void uniphier_spi_recv(struct uniphier_spi_priv *priv)
+{
+ int rsize;
+ u32 val;
+
+ rsize = min(bytes_per_word(priv->bits_per_word), priv->rx_bytes);
+ priv->rx_bytes -= rsize;
+
+ val = readl(priv->base + SSI_RXDR);
+
+ if (priv->rx_buf) {
+ switch (rsize) {
+ case 1:
+ *priv->rx_buf = val;
+ break;
+ case 2:
+ put_unaligned_le16(val, priv->rx_buf);
+ break;
+ case 4:
+ put_unaligned_le32(val, priv->rx_buf);
+ break;
+ }
+
+ priv->rx_buf += rsize;
+ }
+}
+
+static void uniphier_spi_fill_tx_fifo(struct uniphier_spi_priv *priv)
+{
+ unsigned int tx_count;
+ u32 val;
+
+ tx_count = DIV_ROUND_UP(priv->tx_bytes,
+ bytes_per_word(priv->bits_per_word));
+ tx_count = min(tx_count, SSI_FIFO_DEPTH);
+
+ /* set fifo threshold */
+ val = readl(priv->base + SSI_FC);
+ val &= ~(SSI_FC_TXFTH_MASK | SSI_FC_RXFTH_MASK);
+ val |= FIELD_PREP(SSI_FC_TXFTH_MASK, tx_count);
+ val |= FIELD_PREP(SSI_FC_RXFTH_MASK, tx_count);
+ writel(val, priv->base + SSI_FC);
+
+ while (tx_count--)
+ uniphier_spi_send(priv);
+}
+
+static void uniphier_spi_set_cs(struct spi_device *spi, bool enable)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(priv->base + SSI_FPS);
+
+ if (enable)
+ val |= SSI_FPS_FSPOL;
+ else
+ val &= ~SSI_FPS_FSPOL;
+
+ writel(val, priv->base + SSI_FPS);
+}
+
+static int uniphier_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
+ int status;
+
+ uniphier_spi_setup_transfer(spi, t);
+
+ reinit_completion(&priv->xfer_done);
+
+ uniphier_spi_fill_tx_fifo(priv);
+
+ uniphier_spi_irq_enable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
+
+ status = wait_for_completion_timeout(&priv->xfer_done,
+ msecs_to_jiffies(SSI_TIMEOUT_MS));
+
+ uniphier_spi_irq_disable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
+
+ if (status < 0)
+ return status;
+
+ return priv->error;
+}
+
+static int uniphier_spi_prepare_transfer_hardware(struct spi_master *master)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
+
+ writel(SSI_CTL_EN, priv->base + SSI_CTL);
+
+ return 0;
+}
+
+static int uniphier_spi_unprepare_transfer_hardware(struct spi_master *master)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
+
+ writel(0, priv->base + SSI_CTL);
+
+ return 0;
+}
+
+static irqreturn_t uniphier_spi_handler(int irq, void *dev_id)
+{
+ struct uniphier_spi_priv *priv = dev_id;
+ u32 val, stat;
+
+ stat = readl(priv->base + SSI_IS);
+ val = SSI_IC_TCIC | SSI_IC_RCIC | SSI_IC_RORIC;
+ writel(val, priv->base + SSI_IC);
+
+ /* rx fifo overrun */
+ if (stat & SSI_IS_RORID) {
+ priv->error = -EIO;
+ goto done;
+ }
+
+ /* rx complete */
+ if ((stat & SSI_IS_RCID) && (stat & SSI_IS_RXRS)) {
+ while ((readl(priv->base + SSI_SR) & SSI_SR_RNE) &&
+ (priv->rx_bytes - priv->tx_bytes) > 0)
+ uniphier_spi_recv(priv);
+
+ if ((readl(priv->base + SSI_SR) & SSI_SR_RNE) ||
+ (priv->rx_bytes != priv->tx_bytes)) {
+ priv->error = -EIO;
+ goto done;
+ } else if (priv->rx_bytes == 0)
+ goto done;
+
+ /* next tx transfer */
+ uniphier_spi_fill_tx_fifo(priv);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+
+done:
+ complete(&priv->xfer_done);
+ return IRQ_HANDLED;
+}
+
+static int uniphier_spi_probe(struct platform_device *pdev)
+{
+ struct uniphier_spi_priv *priv;
+ struct spi_master *master;
+ struct resource *res;
+ unsigned long clk_rate;
+ int irq;
+ int ret;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*priv));
+ if (!master)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, master);
+
+ priv = spi_master_get_devdata(master);
+ priv->master = master;
+ priv->is_save_param = false;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->base)) {
+ ret = PTR_ERR(priv->base);
+ goto out_master_put;
+ }
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(priv->clk);
+ goto out_master_put;
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ goto out_master_put;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ\n");
+ ret = irq;
+ goto out_disable_clk;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, uniphier_spi_handler,
+ 0, "uniphier-spi", priv);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto out_disable_clk;
+ }
+
+ init_completion(&priv->xfer_done);
+
+ clk_rate = clk_get_rate(priv->clk);
+
+ master->max_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MIN_CLK_DIVIDER);
+ master->min_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MAX_CLK_DIVIDER);
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
+ master->dev.of_node = pdev->dev.of_node;
+ master->bus_num = pdev->id;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+
+ master->set_cs = uniphier_spi_set_cs;
+ master->transfer_one = uniphier_spi_transfer_one;
+ master->prepare_transfer_hardware
+ = uniphier_spi_prepare_transfer_hardware;
+ master->unprepare_transfer_hardware
+ = uniphier_spi_unprepare_transfer_hardware;
+ master->num_chipselect = 1;
+
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret)
+ goto out_disable_clk;
+
+ return 0;
+
+out_disable_clk:
+ clk_disable_unprepare(priv->clk);
+
+out_master_put:
+ spi_master_put(master);
+ return ret;
+}
+
+static int uniphier_spi_remove(struct platform_device *pdev)
+{
+ struct uniphier_spi_priv *priv = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static const struct of_device_id uniphier_spi_match[] = {
+ { .compatible = "socionext,uniphier-scssi" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_spi_match);
+
+static struct platform_driver uniphier_spi_driver = {
+ .probe = uniphier_spi_probe,
+ .remove = uniphier_spi_remove,
+ .driver = {
+ .name = "uniphier-spi",
+ .of_match_table = uniphier_spi_match,
+ },
+};
+module_platform_driver(uniphier_spi_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <[email protected]>");
+MODULE_AUTHOR("Keiji Hayashibara <[email protected]>");
+MODULE_DESCRIPTION("Socionext UniPhier SPI controller driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
On Wed, Aug 1, 2018 at 10:29 AM, Keiji Hayashibara
<[email protected]> wrote:
> Add SPI controller driver implemented in Socionext UniPhier SoCs.
>
> UniPhier SoCs have two types SPI controllers; SCSSI supports a
> single channel, and MCSSI supports multiple channels.
> This driver supports SCSSI only.
>
> This controller has 32bit TX/RX FIFO with depth of eight entry,
> and supports the SPI master mode only.
>
> This commit is implemented in PIO transfer mode, not DMA transfer.
>
One comment below, otherwise FWIW,
Reviewed-by: Andy Shevchenko <[email protected]>
> Signed-off-by: Kunihiko Hayashi <[email protected]>
> Signed-off-by: Keiji Hayashibara <[email protected]>
> ---
> drivers/spi/Kconfig | 13 ++
> drivers/spi/Makefile | 1 +
> drivers/spi/spi-uniphier.c | 525 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 539 insertions(+)
> create mode 100644 drivers/spi/spi-uniphier.c
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index ad5d68e..671d078 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -688,6 +688,19 @@ config SPI_TXX9
> help
> SPI driver for Toshiba TXx9 MIPS SoCs
>
> +config SPI_UNIPHIER
> + tristate "Socionext UniPhier SPI Controller"
> + depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
> + help
> + This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
> +
> + UniPhier SoCs have SCSSI and MCSSI SPI controllers.
> + Every UniPhier SoC has SCSSI which supports single channel.
> + Older UniPhier Pro4/Pro5 also has MCSSI which support multiple channels.
> + This driver supports SCSSI only.
> +
> + If your SoC supports SCSSI, say Y here.
> +
> config SPI_XCOMM
> tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
> depends on I2C
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index cb1f437..a90d559 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -101,6 +101,7 @@ spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o
> obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
> obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
> obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
> +obj-$(CONFIG_SPI_UNIPHIER) += spi-uniphier.o
> obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
> obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
> obj-$(CONFIG_SPI_XLP) += spi-xlp.o
> diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
> new file mode 100644
> index 0000000..0899854
> --- /dev/null
> +++ b/drivers/spi/spi-uniphier.c
> @@ -0,0 +1,525 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// spi-uniphier.c - Socionext UniPhier SPI controller driver
> +// Copyright 2012 Panasonic Corporation
> +// Copyright 2016-2018 Socionext Inc.
> +
> +#include <linux/kernel.h>
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
I fail to find where those two are used, just remove them.
> +#include <linux/platform_device.h>
> +#include <linux/spi/spi.h>
> +
> +#include <asm/unaligned.h>
> +
> +#define SSI_TIMEOUT_MS 2000
> +#define SSI_MAX_CLK_DIVIDER 254
> +#define SSI_MIN_CLK_DIVIDER 4
> +
> +struct uniphier_spi_priv {
> + void __iomem *base;
> + struct clk *clk;
> + struct spi_master *master;
> + struct completion xfer_done;
> +
> + int error;
> + unsigned int tx_bytes;
> + unsigned int rx_bytes;
> + const u8 *tx_buf;
> + u8 *rx_buf;
> +
> + bool is_save_param;
> + u8 bits_per_word;
> + u16 mode;
> + u32 speed_hz;
> +};
> +
> +#define SSI_CTL 0x00
> +#define SSI_CTL_EN BIT(0)
> +
> +#define SSI_CKS 0x04
> +#define SSI_CKS_CKRAT_MASK GENMASK(7, 0)
> +#define SSI_CKS_CKPHS BIT(14)
> +#define SSI_CKS_CKINIT BIT(13)
> +#define SSI_CKS_CKDLY BIT(12)
> +
> +#define SSI_TXWDS 0x08
> +#define SSI_TXWDS_WDLEN_MASK GENMASK(13, 8)
> +#define SSI_TXWDS_TDTF_MASK GENMASK(7, 6)
> +#define SSI_TXWDS_DTLEN_MASK GENMASK(5, 0)
> +
> +#define SSI_RXWDS 0x0c
> +#define SSI_RXWDS_DTLEN_MASK GENMASK(5, 0)
> +
> +#define SSI_FPS 0x10
> +#define SSI_FPS_FSPOL BIT(15)
> +#define SSI_FPS_FSTRT BIT(14)
> +
> +#define SSI_SR 0x14
> +#define SSI_SR_RNE BIT(0)
> +
> +#define SSI_IE 0x18
> +#define SSI_IE_RCIE BIT(3)
> +#define SSI_IE_RORIE BIT(0)
> +
> +#define SSI_IS 0x1c
> +#define SSI_IS_RXRS BIT(9)
> +#define SSI_IS_RCID BIT(3)
> +#define SSI_IS_RORID BIT(0)
> +
> +#define SSI_IC 0x1c
> +#define SSI_IC_TCIC BIT(4)
> +#define SSI_IC_RCIC BIT(3)
> +#define SSI_IC_RORIC BIT(0)
> +
> +#define SSI_FC 0x20
> +#define SSI_FC_TXFFL BIT(12)
> +#define SSI_FC_TXFTH_MASK GENMASK(11, 8)
> +#define SSI_FC_RXFFL BIT(4)
> +#define SSI_FC_RXFTH_MASK GENMASK(3, 0)
> +
> +#define SSI_TXDR 0x24
> +#define SSI_RXDR 0x24
> +
> +#define SSI_FIFO_DEPTH 8U
> +
> +static inline unsigned int bytes_per_word(unsigned int bits)
> +{
> + return bits <= 8 ? 1 : (bits <= 16 ? 2 : 4);
> +}
> +
> +static inline void uniphier_spi_irq_enable(struct spi_device *spi, u32 mask)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> + u32 val;
> +
> + val = readl(priv->base + SSI_IE);
> + val |= mask;
> + writel(val, priv->base + SSI_IE);
> +}
> +
> +static inline void uniphier_spi_irq_disable(struct spi_device *spi, u32 mask)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> + u32 val;
> +
> + val = readl(priv->base + SSI_IE);
> + val &= ~mask;
> + writel(val, priv->base + SSI_IE);
> +}
> +
> +static void uniphier_spi_set_mode(struct spi_device *spi)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> + u32 val1, val2;
> +
> + /*
> + * clock setting
> + * CKPHS capture timing. 0:rising edge, 1:falling edge
> + * CKINIT clock initial level. 0:low, 1:high
> + * CKDLY clock delay. 0:no delay, 1:delay depending on FSTRT
> + * (FSTRT=0: 1 clock, FSTRT=1: 0.5 clock)
> + *
> + * frame setting
> + * FSPOL frame signal porarity. 0: low, 1: high
> + * FSTRT start frame timing
> + * 0: rising edge of clock, 1: falling edge of clock
> + */
> + switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
> + case SPI_MODE_0:
> + /* CKPHS=1, CKINIT=0, CKDLY=1, FSTRT=0 */
> + val1 = SSI_CKS_CKPHS | SSI_CKS_CKDLY;
> + val2 = 0;
> + break;
> + case SPI_MODE_1:
> + /* CKPHS=0, CKINIT=0, CKDLY=0, FSTRT=1 */
> + val1 = 0;
> + val2 = SSI_FPS_FSTRT;
> + break;
> + case SPI_MODE_2:
> + /* CKPHS=0, CKINIT=1, CKDLY=1, FSTRT=1 */
> + val1 = SSI_CKS_CKINIT | SSI_CKS_CKDLY;
> + val2 = SSI_FPS_FSTRT;
> + break;
> + case SPI_MODE_3:
> + /* CKPHS=1, CKINIT=1, CKDLY=0, FSTRT=0 */
> + val1 = SSI_CKS_CKPHS | SSI_CKS_CKINIT;
> + val2 = 0;
> + break;
> + }
> +
> + if (!(spi->mode & SPI_CS_HIGH))
> + val2 |= SSI_FPS_FSPOL;
> +
> + writel(val1, priv->base + SSI_CKS);
> + writel(val2, priv->base + SSI_FPS);
> +
> + val1 = 0;
> + if (spi->mode & SPI_LSB_FIRST)
> + val1 |= FIELD_PREP(SSI_TXWDS_TDTF_MASK, 1);
> + writel(val1, priv->base + SSI_TXWDS);
> + writel(val1, priv->base + SSI_RXWDS);
> +}
> +
> +static void uniphier_spi_set_transfer_size(struct spi_device *spi, int size)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> + u32 val;
> +
> + val = readl(priv->base + SSI_TXWDS);
> + val &= ~(SSI_TXWDS_WDLEN_MASK | SSI_TXWDS_DTLEN_MASK);
> + val |= FIELD_PREP(SSI_TXWDS_WDLEN_MASK, size);
> + val |= FIELD_PREP(SSI_TXWDS_DTLEN_MASK, size);
> + writel(val, priv->base + SSI_TXWDS);
> +
> + val = readl(priv->base + SSI_RXWDS);
> + val &= ~SSI_RXWDS_DTLEN_MASK;
> + val |= FIELD_PREP(SSI_RXWDS_DTLEN_MASK, size);
> + writel(val, priv->base + SSI_RXWDS);
> +}
> +
> +static void uniphier_spi_set_baudrate(struct spi_device *spi,
> + unsigned int speed)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> + u32 val, ckdiv;
> +
> + /*
> + * the supported rates are even numbers from 4 to 254. (4,6,8...254)
> + * round up as we look for equal or less speed
> + */
> + ckdiv = DIV_ROUND_UP(clk_get_rate(priv->clk), speed);
> + ckdiv = round_up(ckdiv, 2);
> +
> + val = readl(priv->base + SSI_CKS);
> + val &= ~SSI_CKS_CKRAT_MASK;
> + val |= ckdiv & SSI_CKS_CKRAT_MASK;
> + writel(val, priv->base + SSI_CKS);
> +}
> +
> +static void uniphier_spi_setup_transfer(struct spi_device *spi,
> + struct spi_transfer *t)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> + u32 val;
> +
> + priv->error = 0;
> + priv->tx_buf = t->tx_buf;
> + priv->rx_buf = t->rx_buf;
> + priv->tx_bytes = priv->rx_bytes = t->len;
> +
> + if (!priv->is_save_param || priv->mode != spi->mode) {
> + uniphier_spi_set_mode(spi);
> + priv->mode = spi->mode;
> + }
> +
> + if (!priv->is_save_param || priv->bits_per_word != t->bits_per_word) {
> + uniphier_spi_set_transfer_size(spi, t->bits_per_word);
> + priv->bits_per_word = t->bits_per_word;
> + }
> +
> + if (!priv->is_save_param || priv->speed_hz != t->speed_hz) {
> + uniphier_spi_set_baudrate(spi, t->speed_hz);
> + priv->speed_hz = t->speed_hz;
> + }
> +
> + if (!priv->is_save_param)
> + priv->is_save_param = true;
> +
> + /* reset FIFOs */
> + val = SSI_FC_TXFFL | SSI_FC_RXFFL;
> + writel(val, priv->base + SSI_FC);
> +}
> +
> +static void uniphier_spi_send(struct uniphier_spi_priv *priv)
> +{
> + int wsize;
> + u32 val = 0;
> +
> + wsize = min(bytes_per_word(priv->bits_per_word), priv->tx_bytes);
> + priv->tx_bytes -= wsize;
> +
> + if (priv->tx_buf) {
> + switch (wsize) {
> + case 1:
> + val = *priv->tx_buf;
> + break;
> + case 2:
> + val = get_unaligned_le16(priv->tx_buf);
> + break;
> + case 4:
> + val = get_unaligned_le32(priv->tx_buf);
> + break;
> + }
> +
> + priv->tx_buf += wsize;
> + }
> +
> + writel(val, priv->base + SSI_TXDR);
> +}
> +
> +static void uniphier_spi_recv(struct uniphier_spi_priv *priv)
> +{
> + int rsize;
> + u32 val;
> +
> + rsize = min(bytes_per_word(priv->bits_per_word), priv->rx_bytes);
> + priv->rx_bytes -= rsize;
> +
> + val = readl(priv->base + SSI_RXDR);
> +
> + if (priv->rx_buf) {
> + switch (rsize) {
> + case 1:
> + *priv->rx_buf = val;
> + break;
> + case 2:
> + put_unaligned_le16(val, priv->rx_buf);
> + break;
> + case 4:
> + put_unaligned_le32(val, priv->rx_buf);
> + break;
> + }
> +
> + priv->rx_buf += rsize;
> + }
> +}
> +
> +static void uniphier_spi_fill_tx_fifo(struct uniphier_spi_priv *priv)
> +{
> + unsigned int tx_count;
> + u32 val;
> +
> + tx_count = DIV_ROUND_UP(priv->tx_bytes,
> + bytes_per_word(priv->bits_per_word));
> + tx_count = min(tx_count, SSI_FIFO_DEPTH);
> +
> + /* set fifo threshold */
> + val = readl(priv->base + SSI_FC);
> + val &= ~(SSI_FC_TXFTH_MASK | SSI_FC_RXFTH_MASK);
> + val |= FIELD_PREP(SSI_FC_TXFTH_MASK, tx_count);
> + val |= FIELD_PREP(SSI_FC_RXFTH_MASK, tx_count);
> + writel(val, priv->base + SSI_FC);
> +
> + while (tx_count--)
> + uniphier_spi_send(priv);
> +}
> +
> +static void uniphier_spi_set_cs(struct spi_device *spi, bool enable)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> + u32 val;
> +
> + val = readl(priv->base + SSI_FPS);
> +
> + if (enable)
> + val |= SSI_FPS_FSPOL;
> + else
> + val &= ~SSI_FPS_FSPOL;
> +
> + writel(val, priv->base + SSI_FPS);
> +}
> +
> +static int uniphier_spi_transfer_one(struct spi_master *master,
> + struct spi_device *spi,
> + struct spi_transfer *t)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
> + int status;
> +
> + uniphier_spi_setup_transfer(spi, t);
> +
> + reinit_completion(&priv->xfer_done);
> +
> + uniphier_spi_fill_tx_fifo(priv);
> +
> + uniphier_spi_irq_enable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
> +
> + status = wait_for_completion_timeout(&priv->xfer_done,
> + msecs_to_jiffies(SSI_TIMEOUT_MS));
> +
> + uniphier_spi_irq_disable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
> +
> + if (status < 0)
> + return status;
> +
> + return priv->error;
> +}
> +
> +static int uniphier_spi_prepare_transfer_hardware(struct spi_master *master)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
> +
> + writel(SSI_CTL_EN, priv->base + SSI_CTL);
> +
> + return 0;
> +}
> +
> +static int uniphier_spi_unprepare_transfer_hardware(struct spi_master *master)
> +{
> + struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
> +
> + writel(0, priv->base + SSI_CTL);
> +
> + return 0;
> +}
> +
> +static irqreturn_t uniphier_spi_handler(int irq, void *dev_id)
> +{
> + struct uniphier_spi_priv *priv = dev_id;
> + u32 val, stat;
> +
> + stat = readl(priv->base + SSI_IS);
> + val = SSI_IC_TCIC | SSI_IC_RCIC | SSI_IC_RORIC;
> + writel(val, priv->base + SSI_IC);
> +
> + /* rx fifo overrun */
> + if (stat & SSI_IS_RORID) {
> + priv->error = -EIO;
> + goto done;
> + }
> +
> + /* rx complete */
> + if ((stat & SSI_IS_RCID) && (stat & SSI_IS_RXRS)) {
> + while ((readl(priv->base + SSI_SR) & SSI_SR_RNE) &&
> + (priv->rx_bytes - priv->tx_bytes) > 0)
> + uniphier_spi_recv(priv);
> +
> + if ((readl(priv->base + SSI_SR) & SSI_SR_RNE) ||
> + (priv->rx_bytes != priv->tx_bytes)) {
> + priv->error = -EIO;
> + goto done;
> + } else if (priv->rx_bytes == 0)
> + goto done;
> +
> + /* next tx transfer */
> + uniphier_spi_fill_tx_fifo(priv);
> +
> + return IRQ_HANDLED;
> + }
> +
> + return IRQ_NONE;
> +
> +done:
> + complete(&priv->xfer_done);
> + return IRQ_HANDLED;
> +}
> +
> +static int uniphier_spi_probe(struct platform_device *pdev)
> +{
> + struct uniphier_spi_priv *priv;
> + struct spi_master *master;
> + struct resource *res;
> + unsigned long clk_rate;
> + int irq;
> + int ret;
> +
> + master = spi_alloc_master(&pdev->dev, sizeof(*priv));
> + if (!master)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, master);
> +
> + priv = spi_master_get_devdata(master);
> + priv->master = master;
> + priv->is_save_param = false;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->base)) {
> + ret = PTR_ERR(priv->base);
> + goto out_master_put;
> + }
> +
> + priv->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(priv->clk)) {
> + dev_err(&pdev->dev, "failed to get clock\n");
> + ret = PTR_ERR(priv->clk);
> + goto out_master_put;
> + }
> +
> + ret = clk_prepare_enable(priv->clk);
> + if (ret)
> + goto out_master_put;
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ\n");
> + ret = irq;
> + goto out_disable_clk;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, irq, uniphier_spi_handler,
> + 0, "uniphier-spi", priv);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request IRQ\n");
> + goto out_disable_clk;
> + }
> +
> + init_completion(&priv->xfer_done);
> +
> + clk_rate = clk_get_rate(priv->clk);
> +
> + master->max_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MIN_CLK_DIVIDER);
> + master->min_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MAX_CLK_DIVIDER);
> + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
> + master->dev.of_node = pdev->dev.of_node;
> + master->bus_num = pdev->id;
> + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
> +
> + master->set_cs = uniphier_spi_set_cs;
> + master->transfer_one = uniphier_spi_transfer_one;
> + master->prepare_transfer_hardware
> + = uniphier_spi_prepare_transfer_hardware;
> + master->unprepare_transfer_hardware
> + = uniphier_spi_unprepare_transfer_hardware;
> + master->num_chipselect = 1;
> +
> + ret = devm_spi_register_master(&pdev->dev, master);
> + if (ret)
> + goto out_disable_clk;
> +
> + return 0;
> +
> +out_disable_clk:
> + clk_disable_unprepare(priv->clk);
> +
> +out_master_put:
> + spi_master_put(master);
> + return ret;
> +}
> +
> +static int uniphier_spi_remove(struct platform_device *pdev)
> +{
> + struct uniphier_spi_priv *priv = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(priv->clk);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id uniphier_spi_match[] = {
> + { .compatible = "socionext,uniphier-scssi" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, uniphier_spi_match);
> +
> +static struct platform_driver uniphier_spi_driver = {
> + .probe = uniphier_spi_probe,
> + .remove = uniphier_spi_remove,
> + .driver = {
> + .name = "uniphier-spi",
> + .of_match_table = uniphier_spi_match,
> + },
> +};
> +module_platform_driver(uniphier_spi_driver);
> +
> +MODULE_AUTHOR("Kunihiko Hayashi <[email protected]>");
> +MODULE_AUTHOR("Keiji Hayashibara <[email protected]>");
> +MODULE_DESCRIPTION("Socionext UniPhier SPI controller driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-spi" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
With Best Regards,
Andy Shevchenko
The patch
spi: add SPI controller driver for UniPhier SoC
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 5ba155a4d4cc8e4cdd3db6df7d03271a3bd91177 Mon Sep 17 00:00:00 2001
From: Keiji Hayashibara <[email protected]>
Date: Wed, 1 Aug 2018 16:29:12 +0900
Subject: [PATCH] spi: add SPI controller driver for UniPhier SoC
Add SPI controller driver implemented in Socionext UniPhier SoCs.
UniPhier SoCs have two types SPI controllers; SCSSI supports a
single channel, and MCSSI supports multiple channels.
This driver supports SCSSI only.
This controller has 32bit TX/RX FIFO with depth of eight entry,
and supports the SPI master mode only.
This commit is implemented in PIO transfer mode, not DMA transfer.
Signed-off-by: Kunihiko Hayashi <[email protected]>
Signed-off-by: Keiji Hayashibara <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/spi/Kconfig | 13 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-uniphier.c | 525 +++++++++++++++++++++++++++++++++++++
3 files changed, 539 insertions(+)
create mode 100644 drivers/spi/spi-uniphier.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ad5d68e1dab7..671d078349cc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -688,6 +688,19 @@ config SPI_TXX9
help
SPI driver for Toshiba TXx9 MIPS SoCs
+config SPI_UNIPHIER
+ tristate "Socionext UniPhier SPI Controller"
+ depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+ help
+ This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
+
+ UniPhier SoCs have SCSSI and MCSSI SPI controllers.
+ Every UniPhier SoC has SCSSI which supports single channel.
+ Older UniPhier Pro4/Pro5 also has MCSSI which support multiple channels.
+ This driver supports SCSSI only.
+
+ If your SoC supports SCSSI, say Y here.
+
config SPI_XCOMM
tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
depends on I2C
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index cb1f4378b87c..a90d55970036 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -101,6 +101,7 @@ spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o
obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+obj-$(CONFIG_SPI_UNIPHIER) += spi-uniphier.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XLP) += spi-xlp.o
diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
new file mode 100644
index 000000000000..089985465890
--- /dev/null
+++ b/drivers/spi/spi-uniphier.c
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: GPL-2.0
+// spi-uniphier.c - Socionext UniPhier SPI controller driver
+// Copyright 2012 Panasonic Corporation
+// Copyright 2016-2018 Socionext Inc.
+
+#include <linux/kernel.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/unaligned.h>
+
+#define SSI_TIMEOUT_MS 2000
+#define SSI_MAX_CLK_DIVIDER 254
+#define SSI_MIN_CLK_DIVIDER 4
+
+struct uniphier_spi_priv {
+ void __iomem *base;
+ struct clk *clk;
+ struct spi_master *master;
+ struct completion xfer_done;
+
+ int error;
+ unsigned int tx_bytes;
+ unsigned int rx_bytes;
+ const u8 *tx_buf;
+ u8 *rx_buf;
+
+ bool is_save_param;
+ u8 bits_per_word;
+ u16 mode;
+ u32 speed_hz;
+};
+
+#define SSI_CTL 0x00
+#define SSI_CTL_EN BIT(0)
+
+#define SSI_CKS 0x04
+#define SSI_CKS_CKRAT_MASK GENMASK(7, 0)
+#define SSI_CKS_CKPHS BIT(14)
+#define SSI_CKS_CKINIT BIT(13)
+#define SSI_CKS_CKDLY BIT(12)
+
+#define SSI_TXWDS 0x08
+#define SSI_TXWDS_WDLEN_MASK GENMASK(13, 8)
+#define SSI_TXWDS_TDTF_MASK GENMASK(7, 6)
+#define SSI_TXWDS_DTLEN_MASK GENMASK(5, 0)
+
+#define SSI_RXWDS 0x0c
+#define SSI_RXWDS_DTLEN_MASK GENMASK(5, 0)
+
+#define SSI_FPS 0x10
+#define SSI_FPS_FSPOL BIT(15)
+#define SSI_FPS_FSTRT BIT(14)
+
+#define SSI_SR 0x14
+#define SSI_SR_RNE BIT(0)
+
+#define SSI_IE 0x18
+#define SSI_IE_RCIE BIT(3)
+#define SSI_IE_RORIE BIT(0)
+
+#define SSI_IS 0x1c
+#define SSI_IS_RXRS BIT(9)
+#define SSI_IS_RCID BIT(3)
+#define SSI_IS_RORID BIT(0)
+
+#define SSI_IC 0x1c
+#define SSI_IC_TCIC BIT(4)
+#define SSI_IC_RCIC BIT(3)
+#define SSI_IC_RORIC BIT(0)
+
+#define SSI_FC 0x20
+#define SSI_FC_TXFFL BIT(12)
+#define SSI_FC_TXFTH_MASK GENMASK(11, 8)
+#define SSI_FC_RXFFL BIT(4)
+#define SSI_FC_RXFTH_MASK GENMASK(3, 0)
+
+#define SSI_TXDR 0x24
+#define SSI_RXDR 0x24
+
+#define SSI_FIFO_DEPTH 8U
+
+static inline unsigned int bytes_per_word(unsigned int bits)
+{
+ return bits <= 8 ? 1 : (bits <= 16 ? 2 : 4);
+}
+
+static inline void uniphier_spi_irq_enable(struct spi_device *spi, u32 mask)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(priv->base + SSI_IE);
+ val |= mask;
+ writel(val, priv->base + SSI_IE);
+}
+
+static inline void uniphier_spi_irq_disable(struct spi_device *spi, u32 mask)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(priv->base + SSI_IE);
+ val &= ~mask;
+ writel(val, priv->base + SSI_IE);
+}
+
+static void uniphier_spi_set_mode(struct spi_device *spi)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val1, val2;
+
+ /*
+ * clock setting
+ * CKPHS capture timing. 0:rising edge, 1:falling edge
+ * CKINIT clock initial level. 0:low, 1:high
+ * CKDLY clock delay. 0:no delay, 1:delay depending on FSTRT
+ * (FSTRT=0: 1 clock, FSTRT=1: 0.5 clock)
+ *
+ * frame setting
+ * FSPOL frame signal porarity. 0: low, 1: high
+ * FSTRT start frame timing
+ * 0: rising edge of clock, 1: falling edge of clock
+ */
+ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
+ case SPI_MODE_0:
+ /* CKPHS=1, CKINIT=0, CKDLY=1, FSTRT=0 */
+ val1 = SSI_CKS_CKPHS | SSI_CKS_CKDLY;
+ val2 = 0;
+ break;
+ case SPI_MODE_1:
+ /* CKPHS=0, CKINIT=0, CKDLY=0, FSTRT=1 */
+ val1 = 0;
+ val2 = SSI_FPS_FSTRT;
+ break;
+ case SPI_MODE_2:
+ /* CKPHS=0, CKINIT=1, CKDLY=1, FSTRT=1 */
+ val1 = SSI_CKS_CKINIT | SSI_CKS_CKDLY;
+ val2 = SSI_FPS_FSTRT;
+ break;
+ case SPI_MODE_3:
+ /* CKPHS=1, CKINIT=1, CKDLY=0, FSTRT=0 */
+ val1 = SSI_CKS_CKPHS | SSI_CKS_CKINIT;
+ val2 = 0;
+ break;
+ }
+
+ if (!(spi->mode & SPI_CS_HIGH))
+ val2 |= SSI_FPS_FSPOL;
+
+ writel(val1, priv->base + SSI_CKS);
+ writel(val2, priv->base + SSI_FPS);
+
+ val1 = 0;
+ if (spi->mode & SPI_LSB_FIRST)
+ val1 |= FIELD_PREP(SSI_TXWDS_TDTF_MASK, 1);
+ writel(val1, priv->base + SSI_TXWDS);
+ writel(val1, priv->base + SSI_RXWDS);
+}
+
+static void uniphier_spi_set_transfer_size(struct spi_device *spi, int size)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(priv->base + SSI_TXWDS);
+ val &= ~(SSI_TXWDS_WDLEN_MASK | SSI_TXWDS_DTLEN_MASK);
+ val |= FIELD_PREP(SSI_TXWDS_WDLEN_MASK, size);
+ val |= FIELD_PREP(SSI_TXWDS_DTLEN_MASK, size);
+ writel(val, priv->base + SSI_TXWDS);
+
+ val = readl(priv->base + SSI_RXWDS);
+ val &= ~SSI_RXWDS_DTLEN_MASK;
+ val |= FIELD_PREP(SSI_RXWDS_DTLEN_MASK, size);
+ writel(val, priv->base + SSI_RXWDS);
+}
+
+static void uniphier_spi_set_baudrate(struct spi_device *spi,
+ unsigned int speed)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val, ckdiv;
+
+ /*
+ * the supported rates are even numbers from 4 to 254. (4,6,8...254)
+ * round up as we look for equal or less speed
+ */
+ ckdiv = DIV_ROUND_UP(clk_get_rate(priv->clk), speed);
+ ckdiv = round_up(ckdiv, 2);
+
+ val = readl(priv->base + SSI_CKS);
+ val &= ~SSI_CKS_CKRAT_MASK;
+ val |= ckdiv & SSI_CKS_CKRAT_MASK;
+ writel(val, priv->base + SSI_CKS);
+}
+
+static void uniphier_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ priv->error = 0;
+ priv->tx_buf = t->tx_buf;
+ priv->rx_buf = t->rx_buf;
+ priv->tx_bytes = priv->rx_bytes = t->len;
+
+ if (!priv->is_save_param || priv->mode != spi->mode) {
+ uniphier_spi_set_mode(spi);
+ priv->mode = spi->mode;
+ }
+
+ if (!priv->is_save_param || priv->bits_per_word != t->bits_per_word) {
+ uniphier_spi_set_transfer_size(spi, t->bits_per_word);
+ priv->bits_per_word = t->bits_per_word;
+ }
+
+ if (!priv->is_save_param || priv->speed_hz != t->speed_hz) {
+ uniphier_spi_set_baudrate(spi, t->speed_hz);
+ priv->speed_hz = t->speed_hz;
+ }
+
+ if (!priv->is_save_param)
+ priv->is_save_param = true;
+
+ /* reset FIFOs */
+ val = SSI_FC_TXFFL | SSI_FC_RXFFL;
+ writel(val, priv->base + SSI_FC);
+}
+
+static void uniphier_spi_send(struct uniphier_spi_priv *priv)
+{
+ int wsize;
+ u32 val = 0;
+
+ wsize = min(bytes_per_word(priv->bits_per_word), priv->tx_bytes);
+ priv->tx_bytes -= wsize;
+
+ if (priv->tx_buf) {
+ switch (wsize) {
+ case 1:
+ val = *priv->tx_buf;
+ break;
+ case 2:
+ val = get_unaligned_le16(priv->tx_buf);
+ break;
+ case 4:
+ val = get_unaligned_le32(priv->tx_buf);
+ break;
+ }
+
+ priv->tx_buf += wsize;
+ }
+
+ writel(val, priv->base + SSI_TXDR);
+}
+
+static void uniphier_spi_recv(struct uniphier_spi_priv *priv)
+{
+ int rsize;
+ u32 val;
+
+ rsize = min(bytes_per_word(priv->bits_per_word), priv->rx_bytes);
+ priv->rx_bytes -= rsize;
+
+ val = readl(priv->base + SSI_RXDR);
+
+ if (priv->rx_buf) {
+ switch (rsize) {
+ case 1:
+ *priv->rx_buf = val;
+ break;
+ case 2:
+ put_unaligned_le16(val, priv->rx_buf);
+ break;
+ case 4:
+ put_unaligned_le32(val, priv->rx_buf);
+ break;
+ }
+
+ priv->rx_buf += rsize;
+ }
+}
+
+static void uniphier_spi_fill_tx_fifo(struct uniphier_spi_priv *priv)
+{
+ unsigned int tx_count;
+ u32 val;
+
+ tx_count = DIV_ROUND_UP(priv->tx_bytes,
+ bytes_per_word(priv->bits_per_word));
+ tx_count = min(tx_count, SSI_FIFO_DEPTH);
+
+ /* set fifo threshold */
+ val = readl(priv->base + SSI_FC);
+ val &= ~(SSI_FC_TXFTH_MASK | SSI_FC_RXFTH_MASK);
+ val |= FIELD_PREP(SSI_FC_TXFTH_MASK, tx_count);
+ val |= FIELD_PREP(SSI_FC_RXFTH_MASK, tx_count);
+ writel(val, priv->base + SSI_FC);
+
+ while (tx_count--)
+ uniphier_spi_send(priv);
+}
+
+static void uniphier_spi_set_cs(struct spi_device *spi, bool enable)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(priv->base + SSI_FPS);
+
+ if (enable)
+ val |= SSI_FPS_FSPOL;
+ else
+ val &= ~SSI_FPS_FSPOL;
+
+ writel(val, priv->base + SSI_FPS);
+}
+
+static int uniphier_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
+ int status;
+
+ uniphier_spi_setup_transfer(spi, t);
+
+ reinit_completion(&priv->xfer_done);
+
+ uniphier_spi_fill_tx_fifo(priv);
+
+ uniphier_spi_irq_enable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
+
+ status = wait_for_completion_timeout(&priv->xfer_done,
+ msecs_to_jiffies(SSI_TIMEOUT_MS));
+
+ uniphier_spi_irq_disable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
+
+ if (status < 0)
+ return status;
+
+ return priv->error;
+}
+
+static int uniphier_spi_prepare_transfer_hardware(struct spi_master *master)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
+
+ writel(SSI_CTL_EN, priv->base + SSI_CTL);
+
+ return 0;
+}
+
+static int uniphier_spi_unprepare_transfer_hardware(struct spi_master *master)
+{
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
+
+ writel(0, priv->base + SSI_CTL);
+
+ return 0;
+}
+
+static irqreturn_t uniphier_spi_handler(int irq, void *dev_id)
+{
+ struct uniphier_spi_priv *priv = dev_id;
+ u32 val, stat;
+
+ stat = readl(priv->base + SSI_IS);
+ val = SSI_IC_TCIC | SSI_IC_RCIC | SSI_IC_RORIC;
+ writel(val, priv->base + SSI_IC);
+
+ /* rx fifo overrun */
+ if (stat & SSI_IS_RORID) {
+ priv->error = -EIO;
+ goto done;
+ }
+
+ /* rx complete */
+ if ((stat & SSI_IS_RCID) && (stat & SSI_IS_RXRS)) {
+ while ((readl(priv->base + SSI_SR) & SSI_SR_RNE) &&
+ (priv->rx_bytes - priv->tx_bytes) > 0)
+ uniphier_spi_recv(priv);
+
+ if ((readl(priv->base + SSI_SR) & SSI_SR_RNE) ||
+ (priv->rx_bytes != priv->tx_bytes)) {
+ priv->error = -EIO;
+ goto done;
+ } else if (priv->rx_bytes == 0)
+ goto done;
+
+ /* next tx transfer */
+ uniphier_spi_fill_tx_fifo(priv);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+
+done:
+ complete(&priv->xfer_done);
+ return IRQ_HANDLED;
+}
+
+static int uniphier_spi_probe(struct platform_device *pdev)
+{
+ struct uniphier_spi_priv *priv;
+ struct spi_master *master;
+ struct resource *res;
+ unsigned long clk_rate;
+ int irq;
+ int ret;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*priv));
+ if (!master)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, master);
+
+ priv = spi_master_get_devdata(master);
+ priv->master = master;
+ priv->is_save_param = false;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->base)) {
+ ret = PTR_ERR(priv->base);
+ goto out_master_put;
+ }
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(priv->clk);
+ goto out_master_put;
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ goto out_master_put;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ\n");
+ ret = irq;
+ goto out_disable_clk;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, uniphier_spi_handler,
+ 0, "uniphier-spi", priv);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto out_disable_clk;
+ }
+
+ init_completion(&priv->xfer_done);
+
+ clk_rate = clk_get_rate(priv->clk);
+
+ master->max_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MIN_CLK_DIVIDER);
+ master->min_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MAX_CLK_DIVIDER);
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
+ master->dev.of_node = pdev->dev.of_node;
+ master->bus_num = pdev->id;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+
+ master->set_cs = uniphier_spi_set_cs;
+ master->transfer_one = uniphier_spi_transfer_one;
+ master->prepare_transfer_hardware
+ = uniphier_spi_prepare_transfer_hardware;
+ master->unprepare_transfer_hardware
+ = uniphier_spi_unprepare_transfer_hardware;
+ master->num_chipselect = 1;
+
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret)
+ goto out_disable_clk;
+
+ return 0;
+
+out_disable_clk:
+ clk_disable_unprepare(priv->clk);
+
+out_master_put:
+ spi_master_put(master);
+ return ret;
+}
+
+static int uniphier_spi_remove(struct platform_device *pdev)
+{
+ struct uniphier_spi_priv *priv = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static const struct of_device_id uniphier_spi_match[] = {
+ { .compatible = "socionext,uniphier-scssi" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_spi_match);
+
+static struct platform_driver uniphier_spi_driver = {
+ .probe = uniphier_spi_probe,
+ .remove = uniphier_spi_remove,
+ .driver = {
+ .name = "uniphier-spi",
+ .of_match_table = uniphier_spi_match,
+ },
+};
+module_platform_driver(uniphier_spi_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <[email protected]>");
+MODULE_AUTHOR("Keiji Hayashibara <[email protected]>");
+MODULE_DESCRIPTION("Socionext UniPhier SPI controller driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
Hi Andy,
Thank you for your check.
> From: Andy Shevchenko [mailto:[email protected]]
> Sent: Wednesday, August 1, 2018 7:21 PM
> To: Hayashibara, Keiji/ζε εδΊ <[email protected]>
> Subject: Re: [PATCH v3 2/2] spi: add SPI controller driver for UniPhier SoC
>
> On Wed, Aug 1, 2018 at 10:29 AM, Keiji Hayashibara <[email protected]> wrote:
> > Add SPI controller driver implemented in Socionext UniPhier SoCs.
> >
> > UniPhier SoCs have two types SPI controllers; SCSSI supports a single
> > channel, and MCSSI supports multiple channels.
> > This driver supports SCSSI only.
> >
> > This controller has 32bit TX/RX FIFO with depth of eight entry, and
> > supports the SPI master mode only.
> >
> > This commit is implemented in PIO transfer mode, not DMA transfer.
> >
>
> One comment below, otherwise FWIW,
> Reviewed-by: Andy Shevchenko <[email protected]>
>
>
> > Signed-off-by: Kunihiko Hayashi <[email protected]>
> > Signed-off-by: Keiji Hayashibara <[email protected]>
> > ---
> > drivers/spi/Kconfig | 13 ++
> > drivers/spi/Makefile | 1 +
> > drivers/spi/spi-uniphier.c | 525
> > +++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 539 insertions(+)
> > create mode 100644 drivers/spi/spi-uniphier.c
> >
> > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index
> > ad5d68e..671d078 100644
> > --- a/drivers/spi/Kconfig
> > +++ b/drivers/spi/Kconfig
> > @@ -688,6 +688,19 @@ config SPI_TXX9
> > help
> > SPI driver for Toshiba TXx9 MIPS SoCs
> >
> > +config SPI_UNIPHIER
> > + tristate "Socionext UniPhier SPI Controller"
> > + depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
> > + help
> > + This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
> > +
> > + UniPhier SoCs have SCSSI and MCSSI SPI controllers.
> > + Every UniPhier SoC has SCSSI which supports single channel.
> > + Older UniPhier Pro4/Pro5 also has MCSSI which support multiple channels.
> > + This driver supports SCSSI only.
> > +
> > + If your SoC supports SCSSI, say Y here.
> > +
> > config SPI_XCOMM
> > tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
> > depends on I2C
> > diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index
> > cb1f437..a90d559 100644
> > --- a/drivers/spi/Makefile
> > +++ b/drivers/spi/Makefile
> > @@ -101,6 +101,7 @@ spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o
> > obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
> > obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
> > obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
> > +obj-$(CONFIG_SPI_UNIPHIER) += spi-uniphier.o
> > obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
> > obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
> > obj-$(CONFIG_SPI_XLP) += spi-xlp.o
> > diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
> > new file mode 100644 index 0000000..0899854
> > --- /dev/null
> > +++ b/drivers/spi/spi-uniphier.c
> > @@ -0,0 +1,525 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// spi-uniphier.c - Socionext UniPhier SPI controller driver
> > +// Copyright 2012 Panasonic Corporation
> > +// Copyright 2016-2018 Socionext Inc.
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/bitfield.h>
> > +#include <linux/bitops.h>
> > +#include <linux/clk.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
>
> > +#include <linux/of.h>
> > +#include <linux/of_platform.h>
>
> I fail to find where those two are used, just remove them.
I sent this modification as a new patch.
https://patchwork.kernel.org/patch/10553249/
> > +#include <linux/platform_device.h>
> > +#include <linux/spi/spi.h>
> > +
> > +#include <asm/unaligned.h>
> > +
> > +#define SSI_TIMEOUT_MS 2000
> > +#define SSI_MAX_CLK_DIVIDER 254
> > +#define SSI_MIN_CLK_DIVIDER 4
> > +
> > +struct uniphier_spi_priv {
> > + void __iomem *base;
> > + struct clk *clk;
> > + struct spi_master *master;
> > + struct completion xfer_done;
> > +
> > + int error;
> > + unsigned int tx_bytes;
> > + unsigned int rx_bytes;
> > + const u8 *tx_buf;
> > + u8 *rx_buf;
> > +
> > + bool is_save_param;
> > + u8 bits_per_word;
> > + u16 mode;
> > + u32 speed_hz;
> > +};
> > +
> > +#define SSI_CTL 0x00
> > +#define SSI_CTL_EN BIT(0)
> > +
> > +#define SSI_CKS 0x04
> > +#define SSI_CKS_CKRAT_MASK GENMASK(7, 0)
> > +#define SSI_CKS_CKPHS BIT(14)
> > +#define SSI_CKS_CKINIT BIT(13)
> > +#define SSI_CKS_CKDLY BIT(12)
> > +
> > +#define SSI_TXWDS 0x08
> > +#define SSI_TXWDS_WDLEN_MASK GENMASK(13, 8)
> > +#define SSI_TXWDS_TDTF_MASK GENMASK(7, 6)
> > +#define SSI_TXWDS_DTLEN_MASK GENMASK(5, 0)
> > +
> > +#define SSI_RXWDS 0x0c
> > +#define SSI_RXWDS_DTLEN_MASK GENMASK(5, 0)
> > +
> > +#define SSI_FPS 0x10
> > +#define SSI_FPS_FSPOL BIT(15)
> > +#define SSI_FPS_FSTRT BIT(14)
> > +
> > +#define SSI_SR 0x14
> > +#define SSI_SR_RNE BIT(0)
> > +
> > +#define SSI_IE 0x18
> > +#define SSI_IE_RCIE BIT(3)
> > +#define SSI_IE_RORIE BIT(0)
> > +
> > +#define SSI_IS 0x1c
> > +#define SSI_IS_RXRS BIT(9)
> > +#define SSI_IS_RCID BIT(3)
> > +#define SSI_IS_RORID BIT(0)
> > +
> > +#define SSI_IC 0x1c
> > +#define SSI_IC_TCIC BIT(4)
> > +#define SSI_IC_RCIC BIT(3)
> > +#define SSI_IC_RORIC BIT(0)
> > +
> > +#define SSI_FC 0x20
> > +#define SSI_FC_TXFFL BIT(12)
> > +#define SSI_FC_TXFTH_MASK GENMASK(11, 8)
> > +#define SSI_FC_RXFFL BIT(4)
> > +#define SSI_FC_RXFTH_MASK GENMASK(3, 0)
> > +
> > +#define SSI_TXDR 0x24
> > +#define SSI_RXDR 0x24
> > +
> > +#define SSI_FIFO_DEPTH 8U
> > +
> > +static inline unsigned int bytes_per_word(unsigned int bits) {
> > + return bits <= 8 ? 1 : (bits <= 16 ? 2 : 4); }
> > +
> > +static inline void uniphier_spi_irq_enable(struct spi_device *spi,
> > +u32 mask) {
> > + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> > + u32 val;
> > +
> > + val = readl(priv->base + SSI_IE);
> > + val |= mask;
> > + writel(val, priv->base + SSI_IE); }
> > +
> > +static inline void uniphier_spi_irq_disable(struct spi_device *spi,
> > +u32 mask) {
> > + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> > + u32 val;
> > +
> > + val = readl(priv->base + SSI_IE);
> > + val &= ~mask;
> > + writel(val, priv->base + SSI_IE); }
> > +
> > +static void uniphier_spi_set_mode(struct spi_device *spi) {
> > + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> > + u32 val1, val2;
> > +
> > + /*
> > + * clock setting
> > + * CKPHS capture timing. 0:rising edge, 1:falling edge
> > + * CKINIT clock initial level. 0:low, 1:high
> > + * CKDLY clock delay. 0:no delay, 1:delay depending on FSTRT
> > + * (FSTRT=0: 1 clock, FSTRT=1: 0.5 clock)
> > + *
> > + * frame setting
> > + * FSPOL frame signal porarity. 0: low, 1: high
> > + * FSTRT start frame timing
> > + * 0: rising edge of clock, 1: falling edge of clock
> > + */
> > + switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
> > + case SPI_MODE_0:
> > + /* CKPHS=1, CKINIT=0, CKDLY=1, FSTRT=0 */
> > + val1 = SSI_CKS_CKPHS | SSI_CKS_CKDLY;
> > + val2 = 0;
> > + break;
> > + case SPI_MODE_1:
> > + /* CKPHS=0, CKINIT=0, CKDLY=0, FSTRT=1 */
> > + val1 = 0;
> > + val2 = SSI_FPS_FSTRT;
> > + break;
> > + case SPI_MODE_2:
> > + /* CKPHS=0, CKINIT=1, CKDLY=1, FSTRT=1 */
> > + val1 = SSI_CKS_CKINIT | SSI_CKS_CKDLY;
> > + val2 = SSI_FPS_FSTRT;
> > + break;
> > + case SPI_MODE_3:
> > + /* CKPHS=1, CKINIT=1, CKDLY=0, FSTRT=0 */
> > + val1 = SSI_CKS_CKPHS | SSI_CKS_CKINIT;
> > + val2 = 0;
> > + break;
> > + }
> > +
> > + if (!(spi->mode & SPI_CS_HIGH))
> > + val2 |= SSI_FPS_FSPOL;
> > +
> > + writel(val1, priv->base + SSI_CKS);
> > + writel(val2, priv->base + SSI_FPS);
> > +
> > + val1 = 0;
> > + if (spi->mode & SPI_LSB_FIRST)
> > + val1 |= FIELD_PREP(SSI_TXWDS_TDTF_MASK, 1);
> > + writel(val1, priv->base + SSI_TXWDS);
> > + writel(val1, priv->base + SSI_RXWDS); }
> > +
> > +static void uniphier_spi_set_transfer_size(struct spi_device *spi,
> > +int size) {
> > + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> > + u32 val;
> > +
> > + val = readl(priv->base + SSI_TXWDS);
> > + val &= ~(SSI_TXWDS_WDLEN_MASK | SSI_TXWDS_DTLEN_MASK);
> > + val |= FIELD_PREP(SSI_TXWDS_WDLEN_MASK, size);
> > + val |= FIELD_PREP(SSI_TXWDS_DTLEN_MASK, size);
> > + writel(val, priv->base + SSI_TXWDS);
> > +
> > + val = readl(priv->base + SSI_RXWDS);
> > + val &= ~SSI_RXWDS_DTLEN_MASK;
> > + val |= FIELD_PREP(SSI_RXWDS_DTLEN_MASK, size);
> > + writel(val, priv->base + SSI_RXWDS); }
> > +
> > +static void uniphier_spi_set_baudrate(struct spi_device *spi,
> > + unsigned int speed) {
> > + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> > + u32 val, ckdiv;
> > +
> > + /*
> > + * the supported rates are even numbers from 4 to 254. (4,6,8...254)
> > + * round up as we look for equal or less speed
> > + */
> > + ckdiv = DIV_ROUND_UP(clk_get_rate(priv->clk), speed);
> > + ckdiv = round_up(ckdiv, 2);
> > +
> > + val = readl(priv->base + SSI_CKS);
> > + val &= ~SSI_CKS_CKRAT_MASK;
> > + val |= ckdiv & SSI_CKS_CKRAT_MASK;
> > + writel(val, priv->base + SSI_CKS); }
> > +
> > +static void uniphier_spi_setup_transfer(struct spi_device *spi,
> > + struct spi_transfer *t) {
> > + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> > + u32 val;
> > +
> > + priv->error = 0;
> > + priv->tx_buf = t->tx_buf;
> > + priv->rx_buf = t->rx_buf;
> > + priv->tx_bytes = priv->rx_bytes = t->len;
> > +
> > + if (!priv->is_save_param || priv->mode != spi->mode) {
> > + uniphier_spi_set_mode(spi);
> > + priv->mode = spi->mode;
> > + }
> > +
> > + if (!priv->is_save_param || priv->bits_per_word != t->bits_per_word) {
> > + uniphier_spi_set_transfer_size(spi, t->bits_per_word);
> > + priv->bits_per_word = t->bits_per_word;
> > + }
> > +
> > + if (!priv->is_save_param || priv->speed_hz != t->speed_hz) {
> > + uniphier_spi_set_baudrate(spi, t->speed_hz);
> > + priv->speed_hz = t->speed_hz;
> > + }
> > +
> > + if (!priv->is_save_param)
> > + priv->is_save_param = true;
> > +
> > + /* reset FIFOs */
> > + val = SSI_FC_TXFFL | SSI_FC_RXFFL;
> > + writel(val, priv->base + SSI_FC); }
> > +
> > +static void uniphier_spi_send(struct uniphier_spi_priv *priv) {
> > + int wsize;
> > + u32 val = 0;
> > +
> > + wsize = min(bytes_per_word(priv->bits_per_word), priv->tx_bytes);
> > + priv->tx_bytes -= wsize;
> > +
> > + if (priv->tx_buf) {
> > + switch (wsize) {
> > + case 1:
> > + val = *priv->tx_buf;
> > + break;
> > + case 2:
> > + val = get_unaligned_le16(priv->tx_buf);
> > + break;
> > + case 4:
> > + val = get_unaligned_le32(priv->tx_buf);
> > + break;
> > + }
> > +
> > + priv->tx_buf += wsize;
> > + }
> > +
> > + writel(val, priv->base + SSI_TXDR); }
> > +
> > +static void uniphier_spi_recv(struct uniphier_spi_priv *priv) {
> > + int rsize;
> > + u32 val;
> > +
> > + rsize = min(bytes_per_word(priv->bits_per_word), priv->rx_bytes);
> > + priv->rx_bytes -= rsize;
> > +
> > + val = readl(priv->base + SSI_RXDR);
> > +
> > + if (priv->rx_buf) {
> > + switch (rsize) {
> > + case 1:
> > + *priv->rx_buf = val;
> > + break;
> > + case 2:
> > + put_unaligned_le16(val, priv->rx_buf);
> > + break;
> > + case 4:
> > + put_unaligned_le32(val, priv->rx_buf);
> > + break;
> > + }
> > +
> > + priv->rx_buf += rsize;
> > + }
> > +}
> > +
> > +static void uniphier_spi_fill_tx_fifo(struct uniphier_spi_priv *priv)
> > +{
> > + unsigned int tx_count;
> > + u32 val;
> > +
> > + tx_count = DIV_ROUND_UP(priv->tx_bytes,
> > + bytes_per_word(priv->bits_per_word));
> > + tx_count = min(tx_count, SSI_FIFO_DEPTH);
> > +
> > + /* set fifo threshold */
> > + val = readl(priv->base + SSI_FC);
> > + val &= ~(SSI_FC_TXFTH_MASK | SSI_FC_RXFTH_MASK);
> > + val |= FIELD_PREP(SSI_FC_TXFTH_MASK, tx_count);
> > + val |= FIELD_PREP(SSI_FC_RXFTH_MASK, tx_count);
> > + writel(val, priv->base + SSI_FC);
> > +
> > + while (tx_count--)
> > + uniphier_spi_send(priv); }
> > +
> > +static void uniphier_spi_set_cs(struct spi_device *spi, bool enable)
> > +{
> > + struct uniphier_spi_priv *priv = spi_master_get_devdata(spi->master);
> > + u32 val;
> > +
> > + val = readl(priv->base + SSI_FPS);
> > +
> > + if (enable)
> > + val |= SSI_FPS_FSPOL;
> > + else
> > + val &= ~SSI_FPS_FSPOL;
> > +
> > + writel(val, priv->base + SSI_FPS); }
> > +
> > +static int uniphier_spi_transfer_one(struct spi_master *master,
> > + struct spi_device *spi,
> > + struct spi_transfer *t) {
> > + struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
> > + int status;
> > +
> > + uniphier_spi_setup_transfer(spi, t);
> > +
> > + reinit_completion(&priv->xfer_done);
> > +
> > + uniphier_spi_fill_tx_fifo(priv);
> > +
> > + uniphier_spi_irq_enable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
> > +
> > + status = wait_for_completion_timeout(&priv->xfer_done,
> > +
> > + msecs_to_jiffies(SSI_TIMEOUT_MS));
> > +
> > + uniphier_spi_irq_disable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
> > +
> > + if (status < 0)
> > + return status;
> > +
> > + return priv->error;
> > +}
> > +
> > +static int uniphier_spi_prepare_transfer_hardware(struct spi_master
> > +*master) {
> > + struct uniphier_spi_priv *priv =
> > +spi_master_get_devdata(master);
> > +
> > + writel(SSI_CTL_EN, priv->base + SSI_CTL);
> > +
> > + return 0;
> > +}
> > +
> > +static int uniphier_spi_unprepare_transfer_hardware(struct spi_master
> > +*master) {
> > + struct uniphier_spi_priv *priv =
> > +spi_master_get_devdata(master);
> > +
> > + writel(0, priv->base + SSI_CTL);
> > +
> > + return 0;
> > +}
> > +
> > +static irqreturn_t uniphier_spi_handler(int irq, void *dev_id) {
> > + struct uniphier_spi_priv *priv = dev_id;
> > + u32 val, stat;
> > +
> > + stat = readl(priv->base + SSI_IS);
> > + val = SSI_IC_TCIC | SSI_IC_RCIC | SSI_IC_RORIC;
> > + writel(val, priv->base + SSI_IC);
> > +
> > + /* rx fifo overrun */
> > + if (stat & SSI_IS_RORID) {
> > + priv->error = -EIO;
> > + goto done;
> > + }
> > +
> > + /* rx complete */
> > + if ((stat & SSI_IS_RCID) && (stat & SSI_IS_RXRS)) {
> > + while ((readl(priv->base + SSI_SR) & SSI_SR_RNE) &&
> > + (priv->rx_bytes - priv->tx_bytes) > 0)
> > + uniphier_spi_recv(priv);
> > +
> > + if ((readl(priv->base + SSI_SR) & SSI_SR_RNE) ||
> > + (priv->rx_bytes != priv->tx_bytes)) {
> > + priv->error = -EIO;
> > + goto done;
> > + } else if (priv->rx_bytes == 0)
> > + goto done;
> > +
> > + /* next tx transfer */
> > + uniphier_spi_fill_tx_fifo(priv);
> > +
> > + return IRQ_HANDLED;
> > + }
> > +
> > + return IRQ_NONE;
> > +
> > +done:
> > + complete(&priv->xfer_done);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int uniphier_spi_probe(struct platform_device *pdev) {
> > + struct uniphier_spi_priv *priv;
> > + struct spi_master *master;
> > + struct resource *res;
> > + unsigned long clk_rate;
> > + int irq;
> > + int ret;
> > +
> > + master = spi_alloc_master(&pdev->dev, sizeof(*priv));
> > + if (!master)
> > + return -ENOMEM;
> > +
> > + platform_set_drvdata(pdev, master);
> > +
> > + priv = spi_master_get_devdata(master);
> > + priv->master = master;
> > + priv->is_save_param = false;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + priv->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(priv->base)) {
> > + ret = PTR_ERR(priv->base);
> > + goto out_master_put;
> > + }
> > +
> > + priv->clk = devm_clk_get(&pdev->dev, NULL);
> > + if (IS_ERR(priv->clk)) {
> > + dev_err(&pdev->dev, "failed to get clock\n");
> > + ret = PTR_ERR(priv->clk);
> > + goto out_master_put;
> > + }
> > +
> > + ret = clk_prepare_enable(priv->clk);
> > + if (ret)
> > + goto out_master_put;
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0) {
> > + dev_err(&pdev->dev, "failed to get IRQ\n");
> > + ret = irq;
> > + goto out_disable_clk;
> > + }
> > +
> > + ret = devm_request_irq(&pdev->dev, irq, uniphier_spi_handler,
> > + 0, "uniphier-spi", priv);
> > + if (ret) {
> > + dev_err(&pdev->dev, "failed to request IRQ\n");
> > + goto out_disable_clk;
> > + }
> > +
> > + init_completion(&priv->xfer_done);
> > +
> > + clk_rate = clk_get_rate(priv->clk);
> > +
> > + master->max_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MIN_CLK_DIVIDER);
> > + master->min_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MAX_CLK_DIVIDER);
> > + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
> > + master->dev.of_node = pdev->dev.of_node;
> > + master->bus_num = pdev->id;
> > + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
> > +
> > + master->set_cs = uniphier_spi_set_cs;
> > + master->transfer_one = uniphier_spi_transfer_one;
> > + master->prepare_transfer_hardware
> > + = uniphier_spi_prepare_transfer_hardware;
> > + master->unprepare_transfer_hardware
> > + = uniphier_spi_unprepare_transfer_hardware;
> > + master->num_chipselect = 1;
> > +
> > + ret = devm_spi_register_master(&pdev->dev, master);
> > + if (ret)
> > + goto out_disable_clk;
> > +
> > + return 0;
> > +
> > +out_disable_clk:
> > + clk_disable_unprepare(priv->clk);
> > +
> > +out_master_put:
> > + spi_master_put(master);
> > + return ret;
> > +}
> > +
> > +static int uniphier_spi_remove(struct platform_device *pdev) {
> > + struct uniphier_spi_priv *priv = platform_get_drvdata(pdev);
> > +
> > + clk_disable_unprepare(priv->clk);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id uniphier_spi_match[] = {
> > + { .compatible = "socionext,uniphier-scssi" },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, uniphier_spi_match);
> > +
> > +static struct platform_driver uniphier_spi_driver = {
> > + .probe = uniphier_spi_probe,
> > + .remove = uniphier_spi_remove,
> > + .driver = {
> > + .name = "uniphier-spi",
> > + .of_match_table = uniphier_spi_match,
> > + },
> > +};
> > +module_platform_driver(uniphier_spi_driver);
> > +
> > +MODULE_AUTHOR("Kunihiko Hayashi <[email protected]>");
> > +MODULE_AUTHOR("Keiji Hayashibara <[email protected]>");
> > +MODULE_DESCRIPTION("Socionext UniPhier SPI controller driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.7.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-spi"
> > in the body of a message to [email protected] More majordomo
> > info at http://vger.kernel.org/majordomo-info.html
>
>
>
> --
> With Best Regards,
> Andy Shevchenko
--
Best Regards,
Keiji Hayashibara