Add DT binding documentation for Sierra PHY. The PHY supports
a number of different protocols, including PCIe and USB. The
number of lanes can also be configured.
Signed-off-by: Alan Douglas <[email protected]>
---
.../devicetree/bindings/phy/cdns-sierra-phy.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt b/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
new file mode 100644
index 0000000..846bdfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
@@ -0,0 +1,29 @@
+Cadence Sierra PHY
+-----------------------
+
+Required properties:
+ - compatible: cdns,sierra-phy
+ - clocks: Must contain an entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must be "phy_clk"
+ - resets: Must contain an entry for each in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include "sierra_reset" and "sierra_apb"
+ "sierra_reset" must control the reset line to the PHY
+ "sierra_apb" must control the reset line to the APB PHY interface
+ - #phy-cells: must be 2
+ - reg : register range for the PHY
+ - reg-names: Must be "reg"
+
+
+Example:
+ pcie_phy4: pcie-phy4@fd240000 {
+ compatible = "cdns,sierra-phy";
+ reg = <0x0 0xfd240000 0x0 0x40000>;
+ reg-names = "reg";
+ #phy-cells = <2>;
+ resets = <&dummyrst2 0>, <&dummyrst3 0>;
+ reset-names = "sierra_reset","sierra_apb";
+ clocks = <&phyclock>;
+ clock-names = "phy_clk";
+ };
--
1.9.0