2018-10-18 16:17:27

by John Garry

Subject: [PATCH] arm64: defconfig: Enable some IPMI configs

The arm64 port now runs on servers which use IPMI. This patch enables
relevant core configs to save manually enabling them when testing
mainline.

Signed-off-by: John Garry <[email protected]>

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index db8d364..fe8c097 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -297,6 +297,9 @@ CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_VIRTIO_CONSOLE=y
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_DEVICE_INTERFACE=y
+CONFIG_IPMI_SI=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_I2C_CHARDEV=y
--
1.9.1

2018-11-02 19:03:23

by Olof Johansson

Subject: Re: [PATCH] arm64: defconfig: Enable some IPMI configs

Hi John,

On Fri, Oct 19, 2018 at 12:17:07AM +0800, John Garry wrote:
> The arm64 port now runs on servers which use IPMI. This patch enables
> relevant core configs to save manually enabling them when testing
> mainline.
>
> Signed-off-by: John Garry <[email protected]>

I don't think these are required for booting to rootfs, so I'm applying
the patch but switching them over to modules (=m) instead. Hope that's
sufficient for your testing, let me know if it isn't.


Thanks,

-Olof

2018-11-05 14:59:26

by John Garry

Subject: Re: [PATCH] arm64: defconfig: Enable some IPMI configs

On 02/11/2018 18:24, Olof Johansson wrote:
> Hi John,
>
> On Fri, Oct 19, 2018 at 12:17:07AM +0800, John Garry wrote:
>> The arm64 port now runs on servers which use IPMI. This patch enables
>> relevant core configs to save manually enabling them when testing
>> mainline.
>>
>> Signed-off-by: John Garry <[email protected]>
>
> I don't think these are required for booting to rootfs, so I'm applying
> the patch but switching them over to modules (=m) instead. Hope that's
> sufficient for your testing, let me know if it isn't.
>

It's ok.

Thanks,
John

>
> Thanks,
>
> -Olof
>
>