Both graphics and serial consoles are exposed to hard lockups
when handling a large amount of messaging. The kernel watchdog_thresh
parameter up to now has not been available to be set on the kernel line for
early boot.
This patch allows the setting of watchdog_thresh to be increased
when needed to avoid the hard lockups in the console code.
Signed-off-by: Laurence Oberman <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
---
Documentation/admin-guide/kernel-parameters.txt | 7 +++++++
init/main.c | 11 +++++++++++
2 files changed, 18 insertions(+)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 4cdcd1a..102382f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4932,6 +4932,13 @@
or other driver-specific files in the
Documentation/watchdog/ directory.
+ watchdog_thresh=
+ This parameter allows early boot to change the
+ value of the watchdog timeout threshold from the default
+ of 10 seconds to avoid hard lockups. Example:
+ watchdog_thresh=30
+ Default: 10
+
workqueue.watchdog_thresh=
If CONFIG_WQ_WATCHDOG is configured, workqueue can
warn stall conditions and dump internal state to
diff --git a/init/main.c b/init/main.c
index 1c3f902..d5511a9 100644
--- a/init/main.c
+++ b/init/main.c
@@ -1038,6 +1038,17 @@ static int __init set_debug_rodata(char *str)
__setup("rodata=", set_debug_rodata);
#endif
+#ifdef CONFIG_LOCKUP_DETECTOR
+extern int watchdog_thresh;
+
+static int __init watchdog_thresh_setup(char *str)
+{
+ get_option(&str, &watchdog_thresh);
+ return 1;
+}
+__setup("watchdog_thresh=", watchdog_thresh_setup);
+#endif
+
#ifdef CONFIG_STRICT_KERNEL_RWX
static void mark_readonly(void)
{
--
1.8.3.1
Laurence,
On Wed, 24 Oct 2018, Laurence Oberman wrote:
your subject line reads a bit strange:
Subject: [PATCH] V6 init/main.c Enable watchdog_thresh control from kernel line To: [email protected]
Aside of that extra 'To:...', please move the V6 inside the square brackets
together with PATCH so tools can strip off the whole thing.
Also please refrain from using file path as a prefix. It's sufficient to
use 'init' and please add a colon after the prefix to separate it from the
short log string. 'kernel line' reads strange, that should be 'kernel
command line'.
> Both graphics and serial consoles are exposed to hard lockups
> when handling a large amount of messaging. The kernel watchdog_thresh
> parameter up to now has not been available to be set on the kernel line for
> early boot.
> This patch allows the setting of watchdog_thresh to be increased
> when needed to avoid the hard lockups in the console code.
git grep 'This patch' Documentation/process/
> Signed-off-by: Laurence Oberman <[email protected]>
> Acked-by: Randy Dunlap <[email protected]>
> ---
> Documentation/admin-guide/kernel-parameters.txt | 7 +++++++
> init/main.c | 11 +++++++++++
> 2 files changed, 18 insertions(+)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 4cdcd1a..102382f 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -4932,6 +4932,13 @@
> or other driver-specific files in the
> Documentation/watchdog/ directory.
>
> + watchdog_thresh=
> + This parameter allows early boot to change the
> + value of the watchdog timeout threshold from the default
> + of 10 seconds to avoid hard lockups. Example:
> + watchdog_thresh=30
> + Default: 10
Describing a parameter with 'This parameter' is pointless. The 'early
boot' extra is not really helpful either as the kernel command line
parameters are evaluated during early boot.
Changing this parameter does not avoid hard lockups, really. It changes
the time which has to elapse for a lockup to be detected.
Aside of that it does not only affect the hard lockup detector it also
affects the soft lockup detector.
You also fail to mention that setting this to 0 disables both lockup
detectors completely. Something like this perhaps:
watchdog_thresh=
[KNL]
Set the hard lockup detector stall duration
threshold in seconds. The soft lockup detector
threshold is set to twice the value. A value of 0
disables both lockup detectors. Default is 10
seconds.
> --- a/init/main.c
> +++ b/init/main.c
> @@ -1038,6 +1038,17 @@ static int __init set_debug_rodata(char *str)
> __setup("rodata=", set_debug_rodata);
> #endif
>
> +#ifdef CONFIG_LOCKUP_DETECTOR
> +extern int watchdog_thresh;
> +
> +static int __init watchdog_thresh_setup(char *str)
> +{
> + get_option(&str, &watchdog_thresh);
> + return 1;
> +}
> +__setup("watchdog_thresh=", watchdog_thresh_setup);
> +#endif
Why are you adding this to init/main.c?
This really belongs into kernel/watchdog.c which also avoids the ifdeffery
and the ugly extern. Then the subject line becomes something like this:
[PATCH V$N] watchdog/core: Add watchdog_thresh command line parameter
Thanks,
tglx