2018-10-26 15:39:38

by Todor Tomov

Subject: [PATCH 1/2] arm64: dts: qcom: msm8916: Add IOMMU sub-node for VFE context bank

Add IOMMU sub-node for VFE secure context bank.

Signed-off-by: Todor Tomov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index d302d8d..da9867b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -778,6 +778,13 @@
clock-names = "iface", "bus";
qcom,iommu-secure-id = <17>;

+ // vfe:
+ iommu-ctx@3000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
// mdp_0:
iommu-ctx@4000 {
compatible = "qcom,msm-iommu-v1-ns";
--
2.7.4

2018-10-26 15:40:16

by Todor Tomov

Subject: [PATCH 2/2] arm64: dts: qcom: msm8916: Add CAMSS support

Add a node for the Camera Subsystem present on the Qualcomm
MSM8916 SoC.

Signed-off-by: Todor Tomov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 80 +++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index da9867b..7f7ad86 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1396,6 +1396,86 @@
compatible = "venus-encoder";
};
};
+
+ camss: camss@1b00000 {
+ compatible = "qcom,msm8916-camss";
+ reg = <0x1b0ac00 0x200>,
+ <0x1b00030 0x4>,
+ <0x1b0b000 0x200>,
+ <0x1b00038 0x4>,
+ <0x1b08000 0x100>,
+ <0x1b08400 0x100>,
+ <0x1b0a000 0x500>,
+ <0x1b00020 0x10>,
+ <0x1b10000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+ power-domains = <&gcc VFE_GDSC>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+ vdda-supply = <&pm8916_l2>;
+ iommus = <&apps_iommu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};

smd {
--
2.7.4