Add pinctrls required for Camera Control Interface.
Signed-off-by: Todor Tomov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 12 ++++++++++++
arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 24 ++++++++++++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 390a2fa..990120c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -689,4 +689,16 @@
bias-pull-up;
};
};
+
+ cci0_default: cci0_default {
+ pinmux {
+ function = "cci_i2c";
+ pins = "gpio29", "gpio30";
+ };
+ pinconf {
+ pins = "gpio29", "gpio30";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
index c5c42e9..d6a0a4a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
@@ -495,4 +495,28 @@
bias-disable;
};
};
+
+ cci0_default: cci0_default {
+ pinmux {
+ function = "cci_i2c";
+ pins = "gpio17", "gpio18";
+ };
+ pinconf {
+ pins = "gpio17", "gpio18";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ cci1_default: cci1_default {
+ pinmux {
+ function = "cci_i2c";
+ pins = "gpio19", "gpio20";
+ };
+ pinconf {
+ pins = "gpio19", "gpio20";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
};
--
2.7.4
Add pinctrls required for camera sensors:
- power down signal;
- reset signal;
- camera external clock.
Signed-off-by: Todor Tomov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 64 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 96 ++++++++++++++++++++++++++++++
2 files changed, 160 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 990120c..aa9a0ff 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -701,4 +701,68 @@
bias-disable;
};
};
+
+ camera_front_default: camera_front_default {
+ pinmux_pwdn {
+ function = "gpio";
+ pins = "gpio33";
+ };
+ pinconf_pwdn {
+ pins = "gpio33";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pinmux_rst {
+ function = "gpio";
+ pins = "gpio28";
+ };
+ pinconf_rst {
+ pins = "gpio28";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pinmux_mclk1 {
+ function = "cam_mclk1";
+ pins = "gpio27";
+ };
+ pinconf_mclk1 {
+ pins = "gpio27";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_rear_default: camera_rear_default {
+ pinmux_pwdn {
+ function = "gpio";
+ pins = "gpio34";
+ };
+ pinconf_pwdn {
+ pins = "gpio34";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pinmux_rst {
+ function = "gpio";
+ pins = "gpio35";
+ };
+ pinconf_rst {
+ pins = "gpio35";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pinmux_mclk0 {
+ function = "cam_mclk0";
+ pins = "gpio26";
+ };
+ pinconf_mclk0 {
+ pins = "gpio26";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
index d6a0a4a..8d5114d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
@@ -519,4 +519,100 @@
bias-disable;
};
};
+
+ camera_board_default: camera_board_default {
+ mux_pwdn {
+ function = "gpio";
+ pins = "gpio98";
+ };
+ config_pwdn {
+ pins = "gpio98";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_rst {
+ function = "gpio";
+ pins = "gpio104";
+ };
+ config_rst {
+ pins = "gpio104";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_mclk1 {
+ function = "cam_mclk";
+ pins = "gpio14";
+ };
+ config_mclk1 {
+ pins = "gpio14";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_front_default: camera_front_default {
+ mux_pwdn {
+ function = "gpio";
+ pins = "gpio133";
+ };
+ config_pwdn {
+ pins = "gpio133";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_rst {
+ function = "gpio";
+ pins = "gpio23";
+ };
+ config_rst {
+ pins = "gpio23";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_mclk2 {
+ function = "cam_mclk";
+ pins = "gpio15";
+ };
+ config_mclk2 {
+ pins = "gpio15";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_rear_default: camera_rear_default {
+ mux_pwdn {
+ function = "gpio";
+ pins = "gpio26";
+ };
+ config_pwdn {
+ pins = "gpio26";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_rst {
+ function = "gpio";
+ pins = "gpio25";
+ };
+ config_rst {
+ pins = "gpio25";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mux_mclk0 {
+ function = "cam_mclk";
+ pins = "gpio13";
+ };
+ config_mclk0 {
+ pins = "gpio13";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
};
--
2.7.4