Append optional bindings to update SYSCFG Fast Mode Plus bits if
Fast Mode Plus speed is selected.
---
Version history:
v2:
* solve some build issues
v1:
* Initial
---
Pierre-Yves MORDRET (2):
dt-bindings: i2c-stm32: SYSCFG Fast Mode Plus support for I2C STM32F7
i2c: i2c-stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7
.../devicetree/bindings/i2c/i2c-stm32.txt | 6 ++++
drivers/i2c/busses/i2c-stm32f7.c | 38 ++++++++++++++++++++--
2 files changed, 41 insertions(+), 3 deletions(-)
--
2.7.4
Append optional bindings to update SYSCFG Fast Mode Plus bits if
Fast Mode Plus speed is selected.
Signed-off-by: Pierre-Yves MORDRET <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Version history:
v2:
v1:
* Initial
---
---
Documentation/devicetree/bindings/i2c/i2c-stm32.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
index 3b54899..69240e1 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
@@ -26,6 +26,11 @@ Optional properties :
- i2c-scl-falling-time-ns : Only for STM32F7, I2C SCL Falling time for the board
(default: 10)
I2C Timings are derived from these 2 values
+- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
+ whether Fast Mode Plus speed is selected by slave.
+ 1st cell : phandle to syscfg
+ 2nd cell : register offset within SYSCFG
+ 3rd cell : register bitmask for FMP bit
Example :
@@ -53,4 +58,5 @@ Example :
clocks = <&rcc 1 CLK_I2C1>;
pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
pinctrl-names = "default";
+ st,syscfg-fmp = <&syscfg 0x4 0x1>;
};
--
2.7.4
Read SYSCFG bindings to set Fast Mode Plus bits if Fast Mode Plus
speed is selected.
Signed-off-by: Pierre-Yves MORDRET <[email protected]>
---
Version history:
v2:
* Missing header file inclusion
v1:
* Initial
---
---
drivers/i2c/busses/i2c-stm32f7.c | 38 +++++++++++++++++++++++++++++++++++---
1 file changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 62d023e..e9f0c0b 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -21,12 +21,14 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/slab.h>
@@ -276,6 +278,7 @@ struct stm32f7_i2c_msg {
* slave)
* @dma: dma data
* @use_dma: boolean to know if dma is used in the current transfer
+ * @regmap: holds SYSCFG phandle for Fast Mode Plus bits
*/
struct stm32f7_i2c_dev {
struct i2c_adapter adap;
@@ -296,6 +299,7 @@ struct stm32f7_i2c_dev {
bool master_mode;
struct stm32_i2c_dma *dma;
bool use_dma;
+ struct regmap *regmap;
};
/**
@@ -1763,6 +1767,30 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
return 0;
}
+static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev,
+ struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+ u32 reg, mask;
+
+ i2c_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg-fmp");
+ if (IS_ERR(i2c_dev->regmap)) {
+ /* Optional */
+ return 0;
+ }
+
+ ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, ®);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, &mask);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(i2c_dev->regmap, reg, mask, mask);
+}
+
static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
@@ -1828,12 +1856,16 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
ret = device_property_read_u32(&pdev->dev, "clock-frequency",
&clk_rate);
- if (!ret && clk_rate >= 1000000)
+ if (!ret && clk_rate >= 1000000) {
i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS;
- else if (!ret && clk_rate >= 400000)
+ ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
+ if (ret)
+ goto clk_free;
+ } else if (!ret && clk_rate >= 400000) {
i2c_dev->speed = STM32_I2C_SPEED_FAST;
- else if (!ret && clk_rate >= 100000)
+ } else if (!ret && clk_rate >= 100000) {
i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
+ }
rst = devm_reset_control_get(&pdev->dev, NULL);
if (IS_ERR(rst)) {
--
2.7.4
On Mon, Nov 19, 2018 at 12:03:31PM +0100, Pierre-Yves MORDRET wrote:
> Append optional bindings to update SYSCFG Fast Mode Plus bits if
> Fast Mode Plus speed is selected.
>
> Signed-off-by: Pierre-Yves MORDRET <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
Applied to for-next, thanks!
On Mon, Nov 19, 2018 at 12:03:32PM +0100, Pierre-Yves MORDRET wrote:
> Read SYSCFG bindings to set Fast Mode Plus bits if Fast Mode Plus
> speed is selected.
>
> Signed-off-by: Pierre-Yves MORDRET <[email protected]>
Applied to for-next, thanks!